Resultados de la búsqueda de "Electronics"

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Leer Más Menos

1. Purpose: 3 digital audio power amplifier2. Output voltage: 8-24v3. Power amplifier type: Class D4. Output power: 20w5. Output impedance: 4-8 ohms6. Protection: output short circuit protection, overheating protection, function self-recovery7. Module size: 43x55x14mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 10cm * 2cm / 5.91inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs

Leer Más Menos

🔋 See Every Charge. Power 4 Batteries at Once.The NITECORE D4 is an intelligent 4-slot battery charger with an easy-to-read LCD display. Charge compatible rechargeable batteries independently and monitor charging progress at a glance.Why You’ll Love It Charges up to 4 batteries simultaneously Independent slot monitoring and charging Clear LCD display for charging information Supports compatible Li-ion, Ni-MH and Ni-Cd batteries Ideal for home, travel and everyday rechargeable battery use One intelligent charger keeps multiple batteries ready when you need them.

Leer Más Menos

1. Model: USB2. Input voltage: DC5V 0.5-2A3. Output voltage: 3.6-3.7V4. Applicable: home appliances, toys5. Rated power: 10W6. Suitable for all kinds of rechargeable batteries with MX-2.0 interface, and supports multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. Standard charging interface, firmly connected10. Note: To use this product, the battery must have a protective plate before it can be usedSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 13cm * 9cm * 3cm / 5.12inch * 3.54inch * 1.18inch Qty per Carton 132 Carton Weight 3.74kgs / 8.25lb Carton Size 41cm * 38cm * 35cm / 16.14inch * 14.96inch * 13.78inch Loading Container 20GP: 489 cartons * 132 pcs = 64548 pcs40HQ: 1135 cartons * 132 pcs = 149820 pcs

Leer Más Menos

1. PoE power Input: 38V ~ 57V DC input2. Power output: GPIO header 5V 5A (MAX)3. Product dimensions: 64.98 x 64.98mm4. Network standard: supports IEEE 802.3af/at (PoE / PoE+)5. For Raspberry Pi 5 / CM 5, onboard 5V interface, compatible with official enclosureSupports IEEE 802.3af/at network standard6. When used with PoE routers or switches supporting the IEEE 802.3af/at network standard, only one network cable is needed for the Raspberry Pi to connect to the network and be powered.Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 4.70kgs / 10.36lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs40HQ: 1201 cartons * 72 pcs = 86472 pcs

Leer Más Menos

1. Nuevo y de alta calidad. 2. Esta es una fuente de alimentación universal para todos sus pedales, efectos, receptores inalámbricos y más. 3. Las características incluyen entrada mundial, salida regulada en múltiples voltajes, seis enchufes adaptadores y más. 4. Este adaptador está diseñado para suministrar energía donde y cuando la necesite. 5. Con salida de CC seleccionable de hasta 12 voltios y enchufes que se adaptan a la mayoría de los dispositivos electrónicos pequeños, reemplaza una caja llena de baterías. 6. Proporciona un suministro de modo de conmutación regulado universal con entrada de CA seleccionable de 110 a 240 V CA (por lo que con un adaptador de enchufe eléctrico funcionará en cualquier parte del mundo). 7. Tiene salidas DC seleccionables: 3/4.5/5/6/7.5/9/12V. 8. El cargador también incluye 6 enchufes de salida de CC desmontables, por lo que se adapta a casi todos los enchufes de entrada de CC. (2,5 x 0,7 mm, 3,0 x 1,1 mm, 3,5 x 13,5 mm, 3,5 x 15 mm, 5,0 x 2,1 mm, 5,5 x 2,5 mm) 9. Se utiliza para cargadores de baterías, impresoras, consolas de juegos y muchos otros electrodomésticos. 10. Compatible con: teléfono móvil, tableta, cámara, enrutador y otros dispositivos. 11. No es compatible con computadoras portátiles u otros equipos de alta potencia, no es compatible con dispositivos de más de 30 W y la polaridad no se puede invertir. Especificación: General Certificado Compatibilidad electromagnética , DVL Material ABS y PC ignífugos Longitud del cable 1,2 m Tamaño 8*4,8*7 cm Peso 107 gramos Peso del paquete Peso de un paquete 0,16 kg/0,36 lb Un tamaño de paquete 12,5 cm x 11,5 cm x 4,5 cm (4,92 pulgadas x 4,53 pulgadas x 1,77 pulgadas) Cantidad por caja 40 Peso de la caja 7,50 kg/16,53 lb Tamaño de la caja 47 cm x 25 cm x 27 cm (18,5 pulgadas x 9,84 pulgadas x 10,63 pulgadas) Contenedor de carga 20GP: 840 cajas * 40 piezas = 33600 piezas 40HQ: 1951 cajas * 40 piezas = 78040 piezas

Leer Más Menos

1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN3. 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS4854. Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time5. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal6. Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption7. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic8. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance9. Onboard 120Ω terminal resistor, configured by jumper10. Onboard terminals and pin headers, more convenient connection11. Breakout SPI control pins, for connecting with host control boardsSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 41.00kgs / 90.39lb Carton Size 34cm * 32cm * 32cm / 13.39inch * 12.6inch * 12.6inch Loading Container 20GP: 765 cartons * 200 pcs = 153000 pcs40HQ: 1778 cartons * 200 pcs = 355600 pcs

Leer Más Menos

1. Features the RP2350A microcontroller chip developed by Raspberry Pi 2. Unique dual-core, dual-architecture design with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, enabling flexible switching between architectures 3. Built-in 520KB SRAM and 2MB on-chip Flash memory 4. Equipped with a Type-C interface for plug-and-play convenience without worrying about orientation 5. Supports power delivery via Type-C interface (compatible with PD protocol) 6. Designed with postage stamp holes for direct soldering onto custom-designed baseboards 7. Supports USB 1.1 host and device modes 8. Offers low-power sleep and hibernate modes 9. Can be recognized as mass storage over USB, enabling drag-and-drop program downloading 10. Exposes all 15 GPIO pins of the RP2350A 11. Includes 2 SPI interfaces, 2 I2C interfaces, 2 UARTs, 4 12-bit ADCs, and 14 controllable PWM channels 12. Precise on-chip clock and timer system 13. Integrated temperature sensor for real-time chip temperature monitoring 14. 12 programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 6cm * 4cm * 3cm / 2.36inch * 1.57inch * 1.18inch Qty per Carton 792 Carton Weight 40.70kgs / 89.73lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 792 pcs = 317592 pcs40HQ: 930 cartons * 792 pcs = 736560 pcs

Leer Más Menos

1. 11.6" LED display, 16:10, 1920 * 1080 pixel resolution 2. Front dual stereo speaker audio output 3. Support SD, MMC card up to 16GB (not included) 4. Video playback supports 1920*1080P, AVI, PMP, MP4 format, audio playback supports MP3, WMA format, supports JPEG images 5. Support USB 2.0 port 6. Support image browsing using background music (MP3) function 7. Support multiple languages: Chinese, English, French, German, Italian, Spanish, Portuguese, Dutch, Polish 8. Clock, calendar, alarm clock, time switch 9. Output interface: headphone interface output 10. Control mode: manual, remote or power on auto play 11. External power supply: AC 100-240V DC 12V 1ASpecification: General Certificate EMC, LVD Package Weight One Package Weight 1.35kgs / 2.98lb One Package Size 36cm * 30cm * 6cm / 14.17inch * 11.81inch * 2.36inch Qty per Carton 10 Carton Weight 13.50kgs / 29.76lb Carton Size 62cm * 38cm * 32cm / 24.41inch * 14.96inch * 12.6inch Loading Container 20GP: 353 cartons * 10 pcs = 3530 pcs40HQ: 821 cartons * 10 pcs = 8210 pcs

Leer Más Menos

1. 800x480 hardware resolution, configurable by software (up to 1920x1080) 2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers - When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free - When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free 3. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. 4. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 5. 3.5mm audio jack, speaker connector, supports HDMI audio output 6. Also supports VGA input (specific cable is required and should be purchased separately)Specification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 15cm * 11cm * 2cm / 5.91inch * 4.33inch * 0.79inch Qty per Carton 80 Carton Weight 27.80kgs / 61.29lb Carton Size 32cm * 32cm * 32cm / 12.6inch * 12.6inch * 12.6inch Loading Container 20GP: 813 cartons * 80 pcs = 65040 pcs40HQ: 1889 cartons * 80 pcs = 151120 pcs

Leer Más Menos

1. Main controller chip: ESP32-P4NRW32 2. RF chip: ESP32-C6H8 3. PSRAM size: 32MB 4. Flash size: 16MB / 32MB5. RF band: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.3 6. Operating voltage: 3.3V 7. Connector type: Pin header, 1mm pitch8. Size: Approx. 25 x 25 x 3.3mmFeatures:1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip, supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Powerful image and audio processing capabilities; image and audio processing interfaces include a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder5. 32MB PSRAM stacked within the chip package, with 16MB / 32MB NOR Flash integrated outside the package (optional)6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and privilege separationSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 760 Carton Weight 16.20kgs / 35.71lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 760 pcs = 313120 pcs40HQ: 958 cartons * 760 pcs = 728080 pcs

Leer Más Menos

Features:1. 2.0-inch smart screen, and added the test attributes of the smart multimeter. At the same time, it optimizes the use of functions and the testing experience. And added a "strong sensitivity detection mode" design.2. The clear EBTN display is clear and easy to read.3. Non-contact and pen-shaped design, easy to operate and carry.4. Dual mode operation (low sensitivity and high sensitivity)5. It has dangerous voltage induction alarm, DC/AC voltage, resistance, frequency, line/zero line difference, line breakpoint position, continuity check, flashlight characteristics, etc.6. It has 8 LED indicators in 3 colors (red/yellow): automatic identification of high/medium/low voltage.7. Alarm mode: sound, analog bar and indicator light (red/yellow).8. LED spotlight, low battery prompt, automatic shutdown function.Parameter:1. Voltage: 600V DC or 600V AC2. Frequency: 40 Hz-1000 Hz3. Impedance: 10Mohms4. AC voltage test: 12V-1000V5. Weight: 69 grams (without batteries)6. Dimensions: 160x28x32 mm7. Power supply: 2 AAA batteries (not included)Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 18cm * 9cm * 5cm / 7.09inch * 3.54inch * 1.97inch Qty per Carton 50 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 36cm * 27cm / 18.5inch * 14.17inch * 10.63inch Loading Container 20GP: 583 cartons * 50 pcs = 29150 pcs40HQ: 1355 cartons * 50 pcs = 67750 pcs

Leer Más Menos