Resultados de la búsqueda de "mounting bracket"
-
Car Dashboard Sun Visor Phone Mount Holder Center Console Navigation Bracket
1. With this dashboard phone holder, you can look straight ahead while driving, without lowering your head or turning your head to look at your phone, making driving safer2. Press the lock button in the middle of the holder to automatically lock the phone, and you only need to operate it with one hand3. The clamp can be rotated and adjusted 360 degrees freely, with no angle restrictions4. The steel shaft is pressurized and firmly supported, so it will not fall even on bumpy roads5. Double silicone protection, no scratches on the phone, no damage to the car, you can use it with confidence6. It can not only be clamped on the dashboard, but also installed on the sun visor, rearview mirror, etc.7. Suitable for 4.7-7.2-inch mobile phones, with a clamping range of 60-89mm8. Note: The dashboard must be longer than 5 cm and less than 4 cm thick9. Material: ABS, silicone, hardwareSpecification: Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 12cm * 11cm * 11cm / 4.72inch * 4.33inch * 4.33inch Qty per Carton 100 Carton Weight 14.10kgs / 31.08lb Carton Size 51cm * 37cm * 49cm / 20.08inch * 14.57inch * 19.29inch Loading Container 20GP: 288 cartons * 100 pcs = 28800 pcs40HQ: 669 cartons * 100 pcs = 66900 pcs
£1.99
-
LUXCeO LUXCeO PA1 Camera Universal Hot Shoe Holder Damping Ball-Head Bracket, PA1
1. Made of metal + ABS materials, durable to use. 2. 180 degree swivel joint: Can adjust the flash back office degrees, 180 degrees of the was made better use of flash lighting and lighting. 3. Damping by the thread occlusion design, both combining closer, bearing more, and convenient maintenance, low failure rate. 4. Universal hot shoe device interface at the bottom, no longer limited to a single product limitation, can be used for all hot shoe mouth camera equipment. 5. 1/4 inch mount: Use to mount accessories onto a flash bracket, and fits for most DSLR camera, camcorder, tripod, LED video light, flash light, LCD monitors and other accessories with 1/4 inch screw thread. 6. Size: 49.5x29.7mm 7. Weight: 25gSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 26cm * 26cm / 12.6inch * 10.24inch * 10.24inch Loading Container 20GP: 1232 cartons * 200 pcs = 246400 pcs40HQ: 2861 cartons * 200 pcs = 572200 pcs
£2.99
-
For Insta360 GO Ultra Sunnylife Quick-Release Magnetic Base Mount 1/4 180 Tilt Adjustable Tabletop Base Bracket, DZ-143 For Insta360 GO Ultra
Features: 1. Magnetic Base Mount & Adapter. Compatible with Insta360 GO Ultra. 2. 180 degree tilt to adjust angles freely. 3. Double Locked & Quick on/off. Snap in or take out your cam in seconds. 4. Multifunctional Magnetic Mount & Adjustable Tabletop Mount. 5. The base and adapter are available for separate use. The magnetic base mount can be base mount for various action cameras, and the adapter can use with selfie stick, tripod and other 1/4 threaded accessories. 6. The soft silicone pad can prevent from shock and scratch. Specifications: 1. Name: Sunnylife Quick-Release Adjustable Magnetic Base Mount 2. Model: DZ-143 3. Compatible Models: For Insta360 GO Ultra 4. Material: Plastic + Aluminum Alloy + Magnet + Silicone 5. Product Size: 58 x 58 x 47mm 6. Net Weight: 70g 7. Packing List: Magnetic Adapter Mount x 1+ Adhesive Iron Sheet x 1Specification: General Compatible with Insta360: GO Ultra Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 8cm * 8cm * 7cm / 3.15inch * 3.15inch * 2.76inch Qty per Carton 100 Carton Weight 10.50kgs / 23.15lb Carton Size 44cm * 33cm * 35cm / 17.32inch * 12.99inch * 13.78inch Loading Container 20GP: 524 cartons * 100 pcs = 52400 pcs40HQ: 1218 cartons * 100 pcs = 121800 pcs
£9.99
-
STARTRC For DJI Avata 2 STARTRC Action Camera Holder Mount Drone Expansion Bracket, For DJI Avata 2 Expansion Bracket
Features1. Easy installation. Designed for DJI Avata 2, it has good fixing effect and adopts double-sided buckle switch mode. You only need to press both sides lightly to open and close it. It can be installed quickly without shaking or falling off. You can use it with confidence; 2. Wide range of general applications. The top of the expansion piece is connected through the (for GoPro) female connector, which is suitable for GoPro Hero series, DJI Action series, Insta360 Ace series, and a variety of sports cameras. It can basically meet the use of most of your sports cameras and solve your compatibility problems; 3. Stable center of gravity. The central (for GoPro) female connector fixed design makes the camera stable and not easy to fall. The front and rear angles can be freely adjusted according to needs, and fixed with screws to meet the needs of shooting pictures at various angles; 4. Multifunctional design. The bottom is designed with a 1/4 nut, which is suitable for more functional scenarios. It can be connected to a handheld display stand for display, support, etc. It can also be connected to a light rod such as a baton or floating handle for Avata one-shot transition shooting. At the same time, it is designed with a launcher bayonet, which can be connected to a STARTRC dedicated launcher for item delivery. It comes with a 1/4 screw to GoPro male adapter, which is compatible with some cameras and bracket accessories, basically meeting most shooting needs; 5. Ultra-light experience. The expansion piece is made of high-quality plastic, with an overall weight of no more than 30g. It will not be too burdensome to install and use, and will not affect your flight use to a certain extent;Package List1. Extension bracket x 1 2. 1/4 thread connector x 1 3. Screw x 1 4. Instruction manual x 1 5. Color box x 1Specification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 10cm * 7cm * 5cm / 3.94inch * 2.76inch * 1.97inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 35cm * 25cm / 16.54inch * 13.78inch * 9.84inch Loading Container 20GP: 725 cartons * 100 pcs = 72500 pcs40HQ: 1684 cartons * 100 pcs = 168400 pcs
£6.99
-
PULUZ PULUZ Folding Magnetic Mount Base L Bracket For Insta360 X4 / X5 / DJI Pocket 3, For Insta360 X4 / X5 / DJI Pocket 3
1. Compatible with 360 degree Panoramic Action Cameras: Suitable for most panoramic and standard action cameras. 2. Strong Magnetic Base: Built-in powerful magnets provide secure attachment to metal surfaces. 3. Folding Design: Compact and foldable for easy storage and portability. 4. Portable and Convenient: Compact and easy to carry, for on-the- use and handsfree functionality during various activities. 5. Multi-Angle Adjustment: Allows flexible positioning and shooting from various angles. 6. Anti-Slip Silicone Pads: Prevent slipping and protect surfaces from scratches 7. Material: ABS+PCSpecification: General Compatible with DJI: Osmo Pocket 4, Osmo Action 6, Osmo Action 5 Pro, Osmo Pocket 3, Osmo Action 4, Osmo Action 3, Pocket 2 Gopro: HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO7 White, HERO7 Black, HERO7 Silver, HERO6 Black Insta360: Luna Ultra, X5, Ace Pro 2, X4, Ace, Ace Pro, X3 Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 14cm * 6cm * 3cm / 5.51inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 32cm * 30cm / 16.54inch * 12.6inch * 11.81inch Loading Container 20GP: 661 cartons * 200 pcs = 132200 pcs40HQ: 1535 cartons * 200 pcs = 307000 pcs
£4.99
-
For iPhone, Galaxy, Huawei, Xiaomi, LG, HTC and Other Smart Phones, Steering Wheel Bracket
Specification: General Material ABS + soft Size 3c74981f-a532-4edd-b3e3-79f703342582 Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 11.9cm * 5.1cm * 3cm / 4.69inch * 2.01inch * 1.18inch Qty per Carton 160 Carton Weight 8.20kgs / 18.08lb Carton Size 43cm * 32cm * 26cm / 16.93inch * 12.6inch * 10.24inch Loading Container 20GP: 745 cartons * 160 pcs = 119200 pcs40HQ: 1730 cartons * 160 pcs = 276800 pcs
£1.99
-
Wall Mount Skateboard Stand For Skateboard Deck Display and Storage
1. High Load Capacity: our skateboard hangers are made of reinforced thermoplastic with stainless steel screws and bolts to ensure your skateboard is securely displayed on the wall2. Screws are sized to fit most skateboards: No need to re-drill your precious collectibles, autographs or limited edition artboards3. Easy installation: the whole installation process can be completed in 5 minutes4. Wide range of applications: skateboard wall mount can be installed in living room, bedroom, deck or garage, both to decorate the room and save space5. Give your skateboard a floating effect on the wall6. Material: ABS7. Note: The product only includes the bracket, not the skateboard8. Size: 12x12x3cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 14cm * 4cm / 5.51inch * 5.51inch * 1.57inch Qty per Carton 120 Carton Weight 13.00kgs / 28.66lb Carton Size 38cm * 50cm * 35cm / 14.96inch * 19.69inch * 13.78inch Loading Container 20GP: 401 cartons * 120 pcs = 48120 pcs40HQ: 930 cartons * 120 pcs = 111600 pcs
£4.99 £1.99
-
PULUZ Abrazadera de expansión de fijación para teléfono inteligente de aleación de aluminio multifunción PULUZ, soporte de montaje para DJI OSMO Pocket / Pocket 2, abrazadera de fijación
1. El soporte para teléfono con pinza lleva el OSMO Pocket al límite. Te ayuda a disfrutar fácilmente del mundo de la fotografía y a descubrir la belleza del mundo virtual. 2. El soporte para teléfono móvil puede fijar eficazmente el OSMO Pocket con un teléfono móvil para evitar dañar el enchufe de datos. 3. Orificios estándar de 1/4 de pulgada para conectar un trípode y un disparador automático. 4. Permitiéndole capturar imágenes panorámicas o videos con movimiento continuo. 5. Rango de clip para teléfono móvil: 55-85 mm, centro de gravedad estable, fácil uso para teléfonos móviles de pantalla grande. 6. Protección suave antideslizante para teléfonos inteligentes y OSMO Pocket. 7. Portátil y duradero, puedes tomar fotografías con tus dispositivos en cualquier momento y en cualquier lugar. 8. Material: Aleación de aluminio. Especificación: General Compatible con DJI: Bolsillo 2 , Estabilizador de bolsillo Osmo Peso del paquete Peso de un paquete 0,15 kg/0,32 lb Un tamaño de paquete 16 cm x 8 cm x 5 cm (6,3 pulgadas x 3,15 pulgadas x 1,97 pulgadas) Cantidad por caja 100 Peso de la caja 16,20 kg/35,71 lb Tamaño de la caja 52 cm * 35 cm * 34 cm/20,47 pulgadas * 13,78 pulgadas * 13,39 pulgadas Contenedor de carga 20GP: 430 cajas * 100 piezas = 43000 piezas 40HQ: 1000 cajas * 100 piezas = 100000 piezas
£9.99
-
Sunnylife Sunnylife TY-Q9354 For DJI Avata / Mavic 3 / Mini 3 Pro Installation AirTag Locator Bracket
1. Firmly installed, for AirTag can be firmly clamped into the bracket without worrying about falling off2. Strong nano adhesive, super viscous, durable and effective3. Quick installation, can be pasted anywhere4. Wide compatibility and convenient installation5. Tear it off without leaving adhesive, and do not worry about leaving offset prints, which will not damage the UAV surface at all6. Applicable model: for DJI FPV / Avata / Mavic 3 / Mini 3 Pro / Mini 2 / Mavic Air 2 / Mavic Pro / 精灵4 Pro / Mavic Mini / 飞米FIMI X8SE 2020 / Air 2S / Mavic 2, etc7. Material: plastic8. Net weight: 2g9. Gross weight: 4g10. Note: The product only includes the support, not other items of UAVSpecification: General Compatible with DJI: Avata, Mini 3 Pro, Mavic 3, Air 2S, Mini 2, Mavic Air 2, Mavic Mini, FPV, Mavic 2 Pro, Mavic Pro, Phantom 4 Pro Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs
£1.99
-
Sunnylife Sunnylife Quick-Release Dual-Direction Magnetic Base Mount 1/4 180 Tilt Adjustable Tabletop Base Bracket For DJI Osmo Nano / Action 6, DZ-141 For DJI Osmo Nano / Action 6
Features: 1. Dual-Direction Magnetic Base Mount & Adapter. Compatible with Osmo Nano / Action 6. 2. 180 degree tilt to adjust angles freely. 3. Double Locked. Strong magnet and clasp system for extra protection, with no fear of loosing. 4. Multifunctional Magnetic Mount & Adjustable Tabletop Mount. 5. The base and adapter are available for separate use. The magnetic base mount can be base mount for various action cameras, and the adapter can use with selfie stick, tripod and other 1/4 threaded accessories. 6. The soft silicone pad can prevent from shock and scratch. Specifications: 1. Name: Sunnylife Quick-Release Adjustable Dual-Direction Magnetic Base Mount 2. Model: DZ-141 3. Compatible Models: For Osmo Nano/Action 6 4. Material: Plastic + Aluminum Alloy + Magnet + Silicone 5. Product Size: 58 x 58 x 46mm 6. Net Weight: 69gSpecification: General Compatible with DJI: Osmo Action 6, Osmo Nano Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 9cm * 9cm * 7cm / 3.54inch * 3.54inch * 2.76inch Qty per Carton 100 Carton Weight 10.50kgs / 23.15lb Carton Size 44cm * 33cm * 35cm / 17.32inch * 12.99inch * 13.78inch Loading Container 20GP: 524 cartons * 100 pcs = 52400 pcs40HQ: 1218 cartons * 100 pcs = 121800 pcs
£9.99
-
Adjustable Stainless Steel Refrigerator Bracket Washing Machine Base Bracket, Single Tube 4 Legs, Single Tube 4 Wheels, Double Tubes 4 Wheels + 4 Legs, Double Tubes 4 Wheels + 8 Legs, Double Tubes 8 Wheels + 4 Legs, Double Tube 12 Feet
1. Material: Plastic2. Strong bearing capacity3. Fast and convenient locking button4. Universal double wheels, double wheel brakes5. Upgraded double pipes, heightened and stable6. Anti-slip cushion, shockproof lock7. Upgrade large panel, double steel pipe connection8. Easy to move, no clean dead corners9. Scope of application: Washing machine base, pulsator washing machine, drum washing machine, refrigerator support10. Size: Single tube 4 big feet: Length 43-67cm, width 50-75cm, height 12-16cm, weight bearing: 6KG; Single tube 4 wheels: Length 43-67cm, width 50-75cm, height 11cm, weight bearing: 6KG; Single Tube 8 feet: Length 43-67cm, width 50-75cm, height 12-16cm, weight bearing: 6-8KG; Single tube 4 wheels + 4 feet: Length 52-72cm, width 59-78cm, height 10-14cm, weight bearing: 6-8KG; Double tube 4 wheels + 4 feet: Length 52-72cm, width 59-78cm, height 10-14cm, weight bearing: 8-10KG; Double tube 4 wheels + 8 feet: Length 52-72cm, width 59-78cm, height 10-14cm, weight bearing: 8-10KG; Double tube 8 wheels + 4 feet: Length 52-72cm, width 59-78cm, height 10-14cm, weight bearing: 8-10KG; Double tube 12 feet: Length 52-72cm, width 59-78cm, height 10-13cm, weight bearing: 8-10KG.Specification: Package Weight One Package Weight 4.06kgs / 8.95lb One Package Size 45cm * 32cm * 12cm / 17.72inch * 12.6inch * 4.72inch Qty per Carton 7 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 7 pcs = 1239 pcs40HQ: 412 cartons * 7 pcs = 2884 pcs
£7.99 - £20.99
-
AhaStyle Soporte de pared para altavoz inteligente AhaStyle PT62, para Google Home Mini negro, para Google Home Mini blanco, para Amazon Echo Dot 3 negro, para Amazon Echo Dot 3 blanco
1. Resistente y duradero: este soporte para altavoz te permite colgar tu altavoz Google Home Mini de forma segura, protegiendo tu altavoz inteligente de áreas peligrosas. 2. Organiza el espacio: el soporte de pared te permite colgar tu mini altavoz doméstico en la pared para colocarlo fácilmente, dejando espacio para la encimera de la cocina, la mesa de café o la mesita de noche. 3. Puerto de carga reservado: no se preocupe por la carga, este soporte está reservado para un puerto de carga, conveniente para cargar mientras escucha 4. Fácil de instalar: simplemente pegue o atornille en la pared dos tornillos, a través del cable de conexión USB, puede completar una instalación simple 5. Función de colgado: a diferencia de otros colgadores del mercado que solo se pueden enchufar a la toma de corriente, este soporte de pared para altavoz se puede quitar del cable de carga, de modo que el altavoz siga utilizándose, y permanezca en el soporte hasta el próximo uso. 6. Material: ABS + silicona 7. Modelos aplicables: para Google Home Mini 8. Peso: alrededor de 50 g. 9. Tamaño: aproximadamente 9 x 9 x 6 cm 10. Nota: el envío solo incluye el soporte, no incluye otros productos. Especificación: General Compatible con Google: Inicio Mini Peso del paquete Peso de un paquete 0,07 kg/0,16 lb Un tamaño de paquete 10 cm x 10 cm x 6 cm (3,94 pulgadas x 3,94 pulgadas x 2,36 pulgadas) Cantidad por caja 30 Peso de la caja 2,50 kg/5,51 lb Tamaño de la caja 53 cm x 38 cm x 14 cm (20,87 pulgadas x 14,96 pulgadas x 5,51 pulgadas) Contenedor de carga 20GP: 945 cajas * 30 uds. = 28350 uds. 40HQ: 2195 cajas * 30 piezas = 65850 piezas
£3.99