Resultados de la búsqueda de "Electronics"

Oscilloscope function introduction:1. Dual channel 2X10MHz bandwidth, 50MS/s real-time sampling rate2. Measuring voltage: 400V (MAX)3. FPGA+ADC+MCU high-performance hardware architecture, waveform details are captured without loss4. With complete trigger functions (automatic, single, regular)5. Equipped with efficient one-button automatic adjustment, the measured waveform can be displayed without cumbersome adjustments.6. Save waveform screenshots and support exporting pictures to the computer to facilitate secondary waveform analysis.Multimeter function introduction:1. Four-digit integer 9999 count true effective value measurement2. Voltage, current, capacitance, resistance, diode, continuity, zero line identification, temperature3. Measuring voltage: AC750V, DC1000V (MAX)4. Automatic range, intelligent anti-burning5. Data retention, color screen digital displayIntroduction to signal generator functions1. 7 signal waveforms: sine wave, square wave, triangle wave, full wave, half wave, noise wave, DC2. Output frequency: 1Hz-2MHz3. Output amplitude: 0.1-3.3V4. Output duty cycle: 0-1001. Screen: 2.8-inch true color screen2. Resolution: 320 x 2403. Charging: TYPE-C (5V/1A)4. Battery: 3000mAh lithium battery5. Supported functions: oscilloscope, signal generator, digital multimeter6. Standby time: 8 hours7. Language: English, Russian, Portuguese, Japanese, German8. Size: 141.7x93.5x38mm9. Weight: 300g10. The hardware architecture adopts the same ARM + FPGA + high-speed ADC solution as that of desktop computers. It has high cost and is an unusual CPU direct acquisition solution. The trigger system is powerful and has super waveform capture capabilities without losing the waveform details.11. It has complete trigger modes: automatic, single, and normal; equipped with efficient one-button automatic adjustment, which can display the measured signal waveform without cumbersome adjustments.12. Save waveform screenshots with one click. The saved pictures can be viewed on an oscilloscope or exported to a computer to facilitate secondary analysis of the collected signals.13. Intelligent anti-burning has overload protection, and built-in double fuses prevent meter burning and are safer14. 3000mah large-capacity lithium battery, TYPE-C port can be recharged worry-free and labor-saving, and has a long battery life of 8 hours15. The extendable stand can be used and placed for easy reading.16. ABS material + silicone jacket, sturdy and anti-fall, comfortable to the touchEnglish standard:1. 2C23T x 12. 10x probe x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. Instructions x 1English upgrade:1. 2C23T x 12. Instructions x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. 10x probe x 2Specification: Package Weight One Package Weight 0.70kgs / 1.54lb One Package Size 26cm * 13cm * 9cm / 10.24inch * 5.12inch * 3.54inch Qty per Carton 20 Carton Weight 13.50kgs / 29.76lb Carton Size 54cm * 29cm * 45cm / 21.26inch * 11.42inch * 17.72inch Loading Container 20GP: 378 cartons * 20 pcs = 7560 pcs40HQ: 878 cartons * 20 pcs = 17560 pcs

Leer Más Menos

Product Description Hardware Specifications: 1. Main chip: ESP32 2. Module: ESP32-WROVER-B,SIM7600E-H 3. Interface:USB,SD Card,Solar Input interface 4. Flash Memory: 4M Flash / 8M PSRAM 5. Button: Reset,Power switch 6. USB to TTL: CP2104 7. Car Clock: 40MHz 8. SIM Card Size: Nano SIM Card 9. SIM Antenna 10. GPS Antenna 11. Operating Temperature Range: -40-85 degrees 12. Product Size: 111mm x 37mm x 20mm 13. Product Weight: 50g Power Specifications: 1. Working Voltage: 5V input 2. Solar input voltage range???4.4-6V 3. Working Curent: About 200mA 4. Charging Current: 780mA 5. Battery Model: 18650 6. Battery Holder Model: 18650 battery holder 7. JST Connector: 2pin 2mm 8. USB: TYPE-C 3.0 Wi-Fi: 1. Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n(802.11n???speed up to150Mbps)A-MPDU and A-MSDU polymerization???support 0.4??S Protection interval 3. Frequency: range 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth: 1. Protocol meet Bluetooth : v4.2BR/EDR and BLE standard 2. Radio Frequency : with -97dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH 3. Audio Frequency : CVSD&SBC audio frequency Software Specification: 1. Wi-Fi Mode : Station/SoftAP/SoftAP+Station/P2P 2. Security Mechanism : WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type : AES/RSA/ECC/SHA 4. Firmware Upgrade :UART download/OTA???Through network/host to download and write firmware??? 5. Software Development : Support cloud server development /SDK for user firmware development 6. Networking Protocol : IPV4, IPV6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User Configuration : AT + Instruction set, cloud server, Android/iOS APP 8. OS : FreeRTOS Version update function: 1. The batterys positive and negative poles are connected to the wrong protection, overcharge and over discharge protection 2. GPS power control, reduce power consumption, the lowest reaches 300uA when sleeping 3. Replacement of ordinary charging IC with solar charging ICSpecification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 8.20kgs / 18.08lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs

Leer Más Menos

1. Material: Electronic components + PCB2. Working voltage: 5V3. Number of pulses per revolution: 204. The rotary encoder can count the number of output pulses during rotation in the forward and reverse directions by rotation. Unlike the potentiometer, the rotation count is unlimited. With the buttons on the rotary encoder, it can be reset to the initial state, that is, counting from 0.5. Working principle: The incremental encoder is a rotary sensor that converts the rotational displacement into a series of digital pulse signals. These pulses are used to control angular displacement. The conversion of angular displacement in the Eltra encoder uses the photoelectric scanning principle. The reading system is based on the rotation of the radial index disc (code disc) composed of alternating light-transmitting windows and opaque windows, and is simultaneously illuminated vertically by an infrared light source, and the light projects the image of the code disc onto the surface of the receiver . The receiver is covered with a layer of diffraction grating, which has the same window width as the code wheel. The receivers job is to feel the changes produced by the rotation of the disc, and then convert the light changes into corresponding electrical changes. Then the low-level signal is raised to a higher level, and a square pulse without any interference is generated, which must be handled by an electronic circuit. The reading system usually uses a differential method, that is, comparing two different signals with the same waveform but a phase difference of 180 ° in order to improve the quality and stability of the output signal. The reading is formed based on the difference between the two signals, thereby eliminating interference.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 18cm * 12cm / 5.91inch * 7.09inch * 4.72inch Qty per Carton 224 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 224 pcs = 39648 pcs40HQ: 412 cartons * 224 pcs = 92288 pcs

Leer Más Menos

OverviewThis is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience.Features1. 5.5 inch AMOLED, 1080x1920 resolution2. Toughened glass capacitive touch panel, 6H hardness3. Support popular mini PCs such as Raspberry Pi, Jetson Nano, as well as general desktop computers4. When works with Raspberry Pi, supports Raspbian / Ubuntu / Kali / Retropie, driver free5. When works as a computer monitor, support Windows 10/8.1/8/7, five-points touch, and driver free6. 3.5mm audio jack, supports HDMI audio output7. M2.5 screw holes for easy mountingPackage Contents1. 5.5inch HDMI AMOLED x12. HDMI cable x13. USB type A plug to micro B plug cable x14. HDMI adapter (B) x15. USB adapter (B) x16. Screws pack x1Specification: Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size 20cm * 15cm * 8cm / 7.87inch * 5.91inch * 3.15inch Qty per Carton 24 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 32cm * 42cm / 16.54inch * 12.6inch * 16.54inch Loading Container 20GP: 472 cartons * 24 pcs = 11328 pcs40HQ: 1096 cartons * 24 pcs = 26304 pcs

Leer Más Menos

1. Sistema operativo: Android 11 2. CPU: Amlogic S905X4 de cuatro núcleos ARM Cortex-A55 3. GPU: ARM Mali-G31 MP2 4. Memoria: 4 GB + 32 GB/4 GB + 64 GB/4 GB + 128 GB 5. Códec de vídeo 8K, resolución 3840x2160 6. Wi-Fi: 2,4 G/5 G, Bluetooth: 4,1 7. HEVC: H.265, LAN: 1000M 8. Vídeo: Amlogic Video Engine (AVE) con decodificadores y codificadores de hardware dedicados Admite decodificador de video múltiple hasta 4x1080P 60 fps Admite múltiples sesiones de decodificación de video seguras y decodificación y codificación simultáneas Decodificación de video/imágenes AV1 MP-10 L5.1 4Kx2K 60 fps Perfil VP9-2 hasta 8Kx4K 24 fps H.265 HEVC MP-10 L5.1 hasta 8Kx4K 24 fps Perfil AVS2-P2 hasta 8Kx4K 24 fps H.264 AVC HP L5.1 hasta 4Kx2K 30 fps MPEG-4 ASP L5 hasta 1080P 60 fps (ISO-14496) WMV/VC-1 SP/MP/AP hasta 1080P 60 fps Perfil JiZhun AVS-P16(AVS+)/AVS-P2 hasta 1080P 60 fps MPEG-2 MP/HL hasta 1080P 60 fps (ISO-13818) MPEG-1 MP/HL hasta 1080P 60 fps (ISO-11172) RealVideo 8/9/10 hasta 1080P 60 fps Admite subtítulos de vídeo en varios idiomas y formatos Decodificación de resolución de píxeles ilimitada de MJPEG y JPEG (ISO/IEC-10918) Admite miniaturas JPEG, escala, rotación y efectos de transición. Admite formatos de archivos mkv, wmv, mpg, mpeg, dat, avi, mov, iso, mp4, rm y jpg 9. Audio: Admite MP3, AAC, WMA, RM, FLAC, OGG y programable con mezcla descendente 7.1/5.1 VAD de bajo consumo Entrada/salida de audio digital serial SPDIF/IEC958 incorporada y entrada/salida PCM 3 puertos TDM/PCM/I2S integrados con modo TDM/PCM hasta 384 kHz x 32 bits x 16 canales o 96 kHz x 32 bits x 32 canales y modo I2S hasta 384 kHz x 32 bits x 16 canales Entrada PDM de micrófono digital con CIC, LPF y HPF programables, admite hasta 8 DMIC DAC de audio estéreo incorporado Admite salida de canal estéreo de audio dual simultánea con combinación de analógico + PCM o I2S + PCM 10. Idioma: inglés, alemán, francés, italiano, español, chino, japonés y otros 24 idiomas. 11. Aplicaciones En línea: navegue por todos los sitios web de videos, compatible con Netflix, Hulu, Flixster, Youtube, etc. Aplicaciones: Las aplicaciones se descargan gratuitamente desde el mercado de Android, la tienda de aplicaciones de Amazon, etc. Medio: reproducción de medios locales, compatible con HDD, disco U, tarjeta TF Hablar en línea: admite videollamadas por SKYPE, MSN, Facebook, Twitter, QQ, etc. Otros: admite correo electrónico, suite de oficina, etc., admite función DLNA, admite mouse/teclado inalámbrico de 2,4 G 12. Interfaz de E/S: 1xUSB 2.0, 1xUSB 3.0, 1xranura para tarjeta TF, 1xLAN, 1xsalida HD, 1xsalida AV, 1xSPDIF, 1xentrada DC 13. Lista de embalaje: Caja de TV x 1 Mando a distancia por infrarrojos x 1 Cable HDMI x1 Adaptador x 1 Manual x 1 Especificación: Peso del paquete Peso de un paquete 0,35 kg/0,78 lb Un tamaño de paquete 19 cm x 13 cm x 5,5 cm (7,48 pulgadas x 5,12 pulgadas x 2,17 pulgadas) Cantidad por caja 20 Peso de la caja 7,50 kg/16,53 lb Tamaño de la caja 40 cm * 28 cm * 27 cm / 15,75 pulgadas * 11,02 pulgadas * 10,63 pulgadas Contenedor de carga 20GP: 881 cajas * 20 piezas = 17620 piezas 40HQ: 2047 cajas * 20 piezas = 40940 piezas

Leer Más Menos

1. Four independent charging channels: With independent charging control chip, precise control of the charging situation of each charging slot, the working power of the charger is 12V-3A, and a dedicated DC switching power supply is used2. There are four levels of charging current available for selection, 200/300/500/700/1000mA, among which, if there is only 1, 4 channels with batteries, the current levels are: 200/300/500/700/1000 / 1500/2000mA, the discharge battery can be set to 200/300/500/700/1000mA3. The discharging mode does not switch to charging, and the battery discharge capacity is displayed. In charging mode, the 4.21V charger is judged to be fully charged4. LCD screen: Can display the real-time charge/discharge capacity, voltage, current, and time of the 4 channels of batteries5. Four working modes: Charge, discharge, repair and capacity test and battery internal resistance test6. Applicable battery type: Lithium battery, model: 10440, 14500, 16340, 18500, 18650, 26650, 26500; Ni-MH battery, model: AA, AAA, C, D7. Working temperature: 0 to 40 degrees celsius8. Note: The product does not contain batteriesFunction button:1. MODE operating mode selection button2. DISPLAY display mode button3. CURRENT current adjustment button4. SLOT, can individually adjust the working mode of each channelThe specific operation method of the charger:1. Long press MODE for 2 seconds to enter the working mode to select, and then press this key to have four working modes to choose from, namely charge, discharge, repair capacity test and battery internal resistance test2. Press DISPLAY to display the charge current, battery voltage, battery power, and battery charge and discharge time respectively.3. When power on, the charger defaults to the charging mode and the charging current is 500mA4. When powering on, press CURRENT to adjust the current. When entering work, if you want to adjust the current again, you need to switch the working mode to press this key to be effective. The charge and discharge current can be adjusted.5. Press SLOT to adjust the working mode of each channel individually6. When the temperature of the battery exceeds 40 degrees when the battery is charged or the temperature of the PCB board exceeds 40 degrees, the fan will start to rotate.7. Select the capacity test working mode, the current can be the same as chargingSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 22cm * 16cm * 8cm / 8.66inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 15.00kgs / 33.07lb Carton Size 45cm * 33cm * 42cm / 17.72inch * 12.99inch * 16.54inch Loading Container 20GP: 427 cartons * 20 pcs = 8540 pcs40HQ: 992 cartons * 20 pcs = 19840 pcs

Leer Más Menos

Features1. 320x240 resolution, IPS screen, 262K colors, clear and colorful displaying effect 2. Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions 3. MicroSD card slot for storing images and direct displaying them easily 4. Programmable backlight control, power saving 5. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 5V 2. Resolution: 320x240 pixels 3. Display color: 265K colorful 4. Communication interface: SPI 5. Display panel: IPS 6. Display size: 57.60 x 43.20 mm 7. Pixel size: 0.18x 0.18 mm 8. Driver: ST7789 9. Touch Controller: XPT2046 10. Size: 70.20 x 50.20 mmPackage List1. Pico-ResTouch-LCD-2.8 x1 2. Standoffs pack x1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs40HQ: 1439 cartons * 200 pcs = 287800 pcs

Leer Más Menos

1. DC voltage: 0.3mV~600V2. AC voltage: 3mV~600V3. DC current: 3mA~10A4. AC current: 3mA~10A5. Resistance: 0Ω~60ΜΩ6. Capacitance: 0nF~20mF7. Hz: 10Hz-7MHz8. % duty cycle: 10%~90%9. The small multimeter has a VA reverse color screen, and the screen value can be clearly seen in a dark environment10. The test pen fits tightly with the multimeter jack, so there is no worry of falling off, and the service life is longer11. There is an extended support frame on the back, which can be adjusted in angle after being pulled out and fixed to stand12. The main control chip is used, the performance is more stable, and it has a higher and more stable user experience. The built-in anti-burning fuse makes the measurement more secure13. NCV non-contact voltage detection, place the NCV sensing area close to the AC voltage, the meter will beep and alarm, the screen will display the L indicator light green when the signal is weak; the screen will display the H indicator light red when the signal is strong14. USB charging has strong battery life, built-in 3.7V1000mA lithium battery, the indicator light is red during charging, and bright green when full15. Press the flashlight button to turn on the lighting, no longer afraid of not being able to see the measurement location, eliminate the risk of electric shock, and assist in night measurement work16. The meter will automatically shut down after about 15 minutes without any operation, saving energy and electricity17. Size: 8.9x9.05x4 cm18. Packing list: multimeter; instruction manual; charging cable; test lead cable; temperature cable; packaging boxSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 17cm * 6cm / 6.69inch * 6.69inch * 2.36inch Qty per Carton 50 Carton Weight 20.00kgs / 44.09lb Carton Size 52cm * 35cm * 50cm / 20.47inch * 13.78inch * 19.69inch Loading Container 20GP: 293 cartons * 50 pcs = 14650 pcs40HQ: 680 cartons * 50 pcs = 34000 pcs

Leer Más Menos

1. This product is a microcontroller development board supporting 2.4GHz Wi-Fi and Bluetooth BLE 5. Integrated with high-capacity Flash and PSRAM, it features an onboard 1.46-inch touch LCD screen for smooth operation of GUI interfaces like LVGL. Combined with multiple peripheral interfaces, it accelerates ESP32-S3 HMI application development. 2. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, operating at up to 240MHz 3. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antenna 4. Built-in 512 KB SRAM and 384 KB ROM, stacked with 8 MB PSRAM and 16 MB onboard Flash 5. Type-C interface enhances user convenience and device compatibility 6. Onboard 1.46-inch LCD screen with 412 × 412 resolution and 16.7M colors 7. Supports I2C interface for touch control with interrupt capability 8. Exposed UART, I2C, and partial IO interfaces 9. Onboard QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for angle/acceleration detection 10. Onboard PCF85063 RTC chip enables uninterrupted power via external battery, maintaining RTC functionality during main battery replacement 11. Two customizable side buttons (PWR and BOOT) for user-defined functions 12. Onboard 3.7V MX1.25 lithium battery charge/discharge interface 13. Micro SD card slot for storage expansion and high-speed data transfer, facilitating data logging/media playback while streamlining circuit design 14. Flexible clock control and multi-power modes enable precise low-power operation across scenarios 15. Multiple exposed GPIO pins remappable to various functions for custom developmentSpecification: Package Weight One Package Weight 0.38kgs / 0.85lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 128 Carton Weight 49.70kgs / 109.57lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 128 pcs = 70272 pcs40HQ: 1275 cartons * 128 pcs = 163200 pcs

Leer Más Menos

1. Utilizing the ESP32-C5-WROOM-1 series module, equipped with a 32-bit RISC-V processor with a maximum frequency of 240 MHz2. Integrating 384KB SRAM, 320KB ROM, 8MB PSRAM and 32MB Flash, meeting the requirements for program execution, graphical interface and data storage3. Integrating 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth 5 (LE) and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent radio performance4. Built-in battery charging management module, with a reserved 3.7V MX1.25 lithium battery interface, allowing external battery connection for power supply5. Using Type-C interface, eliminating the need to worry about the orientation of insertion, improving user convenience and device compatibility6. Built-in 2.8-inch LCD screen, with a resolution of 240 x 320 pixels and 262K color7. Supports I2C interface control for capacitive touch and interrupts8. Exports UART, I2C and some IO interfaces, integrates full-speed USB serial port9. Built-in QMI8658 six-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor and Micro SD card slot10. Supports flexible clock, various power modes for precise control, achieving low-power modes in multiple scenarios11. Built-in ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI12. Supports ESP-IDF / Arduino development environments, with abundant resources and easy to get startedLCD screen parameters1. Display panel: IPS2. Display size: 2.8 inches3. Display resolution: 240 x 320 pixels4. Display color: 262K5. Communication interface: 4-wire SPI6. Driving IC: ST77897. Touch IC: CST35308. Touch type: capacitive sensing type9. Screen effective size: about 5.76 x 4.32 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 108 Carton Weight 8.00kgs / 17.64lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 108 pcs = 50328 pcs40HQ: 1083 cartons * 108 pcs = 116964 pcs

Leer Más Menos

Hardware specifications:1. Chipset: S905X5M 2.0GHz 64-bit Quad-core Cortex-A55 2. GPU: Mali-G3103. RAM: 2GB/4GB4. ROM: 16GB/32GB/64GB5. USB: Type-A USB2.0x26. LAN: Ethernet:1000M standard RJ-45 7. Wireless: 2.4G /5G dual-band Wifi 802.11 a/b/g/n/ac8. Bluetooth: V5.09. Card reader: Micro SD cards 10. HDMI: HDMI 2.1bfor 4Kx2K 60fps11. HDR: Supports Dolby Visionoptional, HDR10+, HDR10, HLG HDR processing12. 3D: 3D Video formats 13. Power Indicator (LED): Red, Digital Tube LED Display14. Power supply: input: 100-240V 50/60HZ, output: DC 5V/2.0A 15. AV: SupportMain features:1. Operating system: Android 14.02. Support Decoder format: AV1 MP-10 L5.1 up to 4Kx2K 60fps, VP9 Profile-2 up to 4Kx2K 60fps, H.265 HEVC MP-10 L5.1 up to 4Kx2K 60fps, AVS2-P2 Profile up to 4Kx2K 60fps, H.264 AVC HP L5.1 up to 4Kx2K 30fps, MPEG-4 ASP L5 up to 1080P 60fps (ISO-14496), WMV/VC-1 SP/MP/AP up to 1080P 60fps, AVS-P16(AVS+) /AVS-P2 JiZhun Profile up to 1080P 60fps3. Support Media format: Avi/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg 4. Support Music format: MP3/WMA/AAC/WAV/OGG/DDP/HD/FLAC/APE 5. Support Photo format: HD JPEG/BMP/GIF/PNG/TIFF6. HDD file system: FAT16/FAT32/NTFS7. Support Subtitle: SRT/SMI/SUB/SSA/IDX+USB8. High Definition video output: 4K (4096x2160 pixel ) 9. OSD type of languages: English/French/German/Spanish/Italian/ etc 10. Mouse/ Keyboard: Support mouse and keyboard via USB;Support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle Software specifications:1. Network Function: KODI 18.1, Neflix, Vudu, Skype chatting, Picasa, Flicker, Youtube, Facebook, Online movies, etc 2. Other feature: Free Internet searching, thousands of android applications, many kinds of games, etc. Packing list:1. TV box x 12. HD cable x 13. User manual x 14. Packing box x 15. Power adapter x 16. Remote control x 1Specification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 19cm * 12cm * 6cm / 7.48inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 10.90kgs / 24.03lb Carton Size 58cm * 30cm * 25cm / 22.83inch * 11.81inch * 9.84inch Loading Container 20GP: 613 cartons * 30 pcs = 18390 pcs40HQ: 1423 cartons * 30 pcs = 42690 pcs

Leer Más Menos

1. Features a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed up to 240MHz2. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE) with built-in antennas3. Includes 512KB SRAM and 384KB ROM, while stack-integrated with 16MB Flash and 8MB PSRAM4. Features a 4.2-inch full-reflective display with 300 x 400 resolution, offering reflective imaging and eliminating the need for backlighting5. Equipped with a dual-microphone array enabling audio algorithms like noise reduction and echo cancellation, ideal for precise voice recognition and near-field/far-field voice wake-up applications6. Onboard PCF85063 RTC real-time clock and SHTC3 temperature/humidity sensor for precise RTC time management and environmental monitoring7. Integrated 18650 lithium battery holder and RTC backup battery holder (requires rechargeable RTC battery), supporting dual-mode operation: main power supply and independent RTC backup8. Onboard Micro SD card slot for external storage of images or files9. Two customizable side buttons (KEY and BOOT) for developing user-defined functions10. Reserved 2 x 8-row female header (2.54mm pitch) for external expansionSpecifications1. Display panel: fully reflective screen2. Display size: 4.2 inches3. Display resolution: 300 x 4004. Gray scale levels: 25. Communication interface: SPI6. Display method: fully reflective7. Driver IC: ST73058. Display colors: black, white9. Size: about 9.25 x 6.91 cmPackaging list:- ESP32-S3-RLCD-4.2-EN host x 1- Acrylic stand x 2- 8-ohm 2W MX1.25 2PIN speaker (forward) 80mm x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 14cm * 11cm * 4cm / 5.51inch * 4.33inch * 1.57inch Qty per Carton 60 Carton Weight 12.00kgs / 26.46lb Carton Size 44cm * 37cm * 35cm / 17.32inch * 14.57inch * 13.78inch Loading Container 20GP: 468 cartons * 60 pcs = 28080 pcs40HQ: 1086 cartons * 60 pcs = 65160 pcs

Leer Más Menos