Productos
-
WAVESHARE WAVESHARE CAN FD Protocol Converter Compatible With CAN 2.0A/2.0B Protocols Spports DIN Rail Mounting, 32599
1. The CAN FD to RS232/RS485 converter is a DIN rail-mounted bidirectional CAN FD and RS232/RS485 conversion device. It features high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and serial devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design, supporting a wide voltage range of 9V to 36V, with an arbitration domain baud rate of 5Kbps to 1Mbps and a data domain baud rate of 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 85.6 (mm)6. Mounting method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicator lights: POWER, WORK, COM, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in two 120-ohm termination resistors. Setting any one DIP switch to ON connects one 120-ohm resistor in parallel; setting both to ON connects two 120-ohm resistors in parallel.13. Serial port specifications: supports one RS485 or RS232 connection14. Modbus gateway: CAN FD to modbus RTU (Master/Slave)15. Transmit messages: supports 64 transmit messages16. Receive messages: supports 64 receive messages17. Conversion modes: transparent conversion, transparent with ID conversion, standard conversion, modbus conversion, and custom frame header/trailer conversion18. CAN ID: supports standard frames and extended frames19. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)20. Conversion direction: supports bidirectional conversion, serial to CAN only, and CAN to serial only21. Firmware upgrade: supports firmware upgrade via PC software22. Parameter configuration: AT commands, PC software configuration23. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV24. Electrical fast transient/burst immunity: power supply circuit 2KV; RS485/RS232 circuit 1KV; CAN circuit 1KV25. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV; CAN circuit common mode 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs40HQ: 1083 cartons * 54 pcs = 58482 pcs
£34.99
-
Waveshare Waveshare Capacitive Fingerprint Reader
Capacitive Fingerprint Reader, onboard processor STM32F105, commercial fingerprinting algorithm, semiconductor sensorOverview1. The Capacitive Fingerprint Reader is a standard fingerprinting module designed for secondary development, allows fast and stable fingerprint verification.2. Based on a high-speed digital processor STM32F105R8, combined with high-security commercial fingerprinting algorithm, and advanced semiconductor sensor, the Capacitive Fingerprint Reader becomes a simple but smart integration module, provides functionalities like fingerprint enrolling, image processing, feature finding, template generating and storing, fingerprint matching and searching, etc.Features1. Easy to use by some simple commands, you dont have to know any fingerprint technology, or the module inter structure/calculation2. Commercial fingerprinting algorithm, stable performance, fast verification3. Sensitive detection, just touch the collecting window lightly, without pressing4. Allows to freely input/output fingerprint images, fingerprint feature file and other fingerprinting actions5. Dual communication, UART or USB6. Processor will enter sleep and wake up when detecting, achieves low power consumption7. Comes with rich related resources (software on PC, development SDK, tools, and examples for Raspberry/Arduino/STM32)Package Contents1. Capacitive Fingerprint Reader x12. PH2.0 wire 20cm 6Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs
£33.99
-
WAVESHARE WAVESHARE CM5 Dual Network Port Expansion Board Onboard USB 3.2 Gen1 X 2, Supports PoE Module Connection, 32580
1. Networking: 1000M Ethernet RJ45 interface; 2500M Ethernet RJ45 interface2. Connector: Raspberry Pi 40PIN GPIO interface3. USB: USB 3.2 Gen1 x 24. MIPI: 4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector)5. Video: HDMI interface x 2, supports dual 4K output6. M.2: M.2 M KEY (PCIe Gen2/3 x1)7. M.2 (4G/5G): B KEY, supports 4G/5G communication module8. Storage: Onboard Micro SD card slot (for CM5 versions without eMMC)9. Fan Interface: 5V, 4PIN JST-SH PWM fan connector10. Power Input: 7V ~36V wide voltage (round terminal), 5V 5A (Type-C)11. Supports 4-screen display, with added MIPI DSI driver; the system will default to connecting to the screens regardless of whether they are connected, and the screens will display in split-screen mode (this depends on the system version).12. Dimensions: 99.60 x 87.00 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 12cm * 4cm / 4.72inch * 4.72inch * 1.57inch Qty per Carton 96 Carton Weight 6.90kgs / 15.21lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 96 pcs = 39552 pcs40HQ: 958 cartons * 96 pcs = 91968 pcs
£57.99
-
WAVESHARE WAVESHARE CM5-To-Pi5-Adapter For Raspberry Pi 5 CM5 To Pi 5 Adapter Board Supports Connecting To Microphone, 32049
1. CM5 card slot: compatible with all versions of Compute Module 52. Networking: gigabit ethernet RJ45 port3. Connectors: 16-pin PCIe (PCIe Gen2/3 x 1) Raspberry Pi 40-pin GPIO interface4. USB: USB 3.2 Gen1 x 2; USB 2.0 x 25. MIPI: 4-lane MIPI interface × 2 (22-pin 0.5mm FFC connector)6. Video: HDMI interface x 2, supporting dual 4K output7. Audio: compatible with standard 3.5mm headphone jacks for audio input/output via accessory module8. Storage: onboard Micro SD card slot (For CM5 versions without eMMC)9. Fan Interface: 5V, 4-pin JST-SH PWM fan connector10. Power Input: DC 5V 5A11. Onboard 40-pin GPIO interface and standard CM5 connector, supporting Compute Module 5 Lite / eMMC series core boards12. Onboard USB audio decoder chip, supports microphone connection13. Size: about 8.5 x 5.6 cmPackage contents:- CM5-to-Pi5-Adapter x 1- Audio-Adapter x 1- MX1.25 4-pin dual-ended cable (approx. 200mm) x 1- Screw set x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 7cm * 3cm / 3.94inch * 2.76inch * 1.18inch Qty per Carton 160 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 37cm * 35cm / 19.69inch * 14.57inch * 13.78inch Loading Container 20GP: 411 cartons * 160 pcs = 65760 pcs40HQ: 956 cartons * 160 pcs = 152960 pcs
£23.99
-
WAVESHARE Waveshare Compute Module Dual Gigabit Ethernet Base Board for Raspberry Pi CM4, For Raspberry Pi CM4
1. CM4 socket: Suitable for all variants of Compute Module 4 2. Ethernet: Dual Gigabit Ethernet RJ45 3. USB: USB 3.2 Gen1 x 3 4. PIN header: 40PIN GPIO header x 1 5. HD media interface: HD-MI x 2, supports 4K 30fps output 6. DSI display: MIPI DSI display port x 1, 15pin 1.0mm FPC connector 7. CSI camera: MIPI CSI-2 camera port x 2, 15pin 1.0mm FPC connector 8. Power input: 7V-36V 9. FAN: 5V/12V, allows speed adjustment and measurement 10. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variantsSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.80kgs / 39.24lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£43.99
-
Waveshare Waveshare Connector Expansion Board for Micro:bit, I/O Expansion
OverviewThis is an edge connector expansion board designed for micro:bit, breakout the I/O pins to 2.54mm pitch pinheaders for easy use.SpecificationsDimension: 82.05mm x 36.10mmThrough holes diameter: 2mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 2cm / 3.94inch * 1.97inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 960 pcs = 265920 pcs40HQ: 644 cartons * 960 pcs = 618240 pcs
£6.99
-
WAVESHARE Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band
About The ProductThe Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network. 1. New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278 2. EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server 3. Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico)Specifications1. RF chip: SX1262 2. Frequency range: EU868 (863~870MHz) 3. Modulation: LoRa/(G)FSK 4. Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK) 5. Emit power: More than 14dBm 3.3V 6. Spreadind factor: SF5 ~ SF12 7. Operating voltage: 3.3V 8. Module power consumption: Emitting current: 45mA 14dBm; receiving current: 5.3mA 125KHz 9. Communication bus: SPI 10. Operating temperature: -40 ~ 85 degree C 11. Connector: Castellated edge / solder holes 12. Dimensions: 21.00 x 52.00mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 1000 pcs = 328000 pcs40HQ: 763 cartons * 1000 pcs = 763000 pcs
£7.99
-
Waveshare Waveshare Core405R, STM32F4 Core Board
Overview1. Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.2. Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, 3. etc.3. All the I/O ports are accessible on the pin headers4. JTAG/SWD programming/debugging interface5. 2.54mm header pitch, allowed to be plugged-in your application boardWhat has On Board1. STM32F405RGT6: The high performance STM32 MCU which features:- Core: Cortex-M4 32-bit RISC- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz- Operating Voltage: 1.8V-3.6V- Package: LQFP64- Memories: 1MB Flash, 192+4kB SRAM- MCU communication Interfaces:-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN--1 x USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY--1 x USB HS ULPI (external PHY required)- AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP2. AMS1117-3.3: 3.3V voltage regulator3. MIC2075-2: onboard USB power management device4. Power supply switch, powered from 5Vin or USB connection5. Boot mode selection, for configuring BOOT0 pin6. Power indicator7. VBUS LED8. Reset button9. 8M crystal10. 32.768K crystal, for internal RTC with calibration11. JTAG/SWD interface: for debugging/programming12. USB connector, used for establishing USB communication between PC and the STM32 development board13. MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG15. USB jumper- Short the jumper when using USB- Open the jumper to disconnect from related I/O port16. VBAT selection jumper- Short the jumper to use system power supply- Open the jumper to connect the VBAT to external power, such as batteryPackage Contents1. Core405R x 12. USB type A to Mini-B cable x 13. Software CD x 1Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 390 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 390 pcs = 110760 pcs40HQ: 661 cartons * 390 pcs = 257790 pcs
£21.99
-
WAVESHARE Waveshare Dedicated 3007 Cooling Fan for Raspberry Pi Compute Module 4 CM4, 5V, 12V
1. Good condition,with high quality ,great performance2. Cooling fan run smoothly, long life keep CPU safe without overheating3. Compatible with Raspberry Pi CM4 robotic projects and development boardsSpecification:1. Rated Power: 1W (5V, 0.2+/-0.02A); 1.62W (for 12V, 0.135+/-0.02A)2. Rated Speed: 5000+/-10%RPM( for 5V); 8000+/-10%RPM ( for 12V)3. General: Low-profile, PWM speed adjustment4. Interface: 4-wire PWM speed-adjustable fan header5. Cable length: 90+/-10mm6. Size: 54 x 39 x 13mmPackage List:1. CM4-FAN-3007 x 12. Screws and thermal tapes x 1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs40HQ: 1162 cartons * 200 pcs = 232400 pcs
£7.99
-
WAVESHARE Waveshare Dedicated Cooling fan for Jetson TX2 NX, For Jetson TX2 NX
1. Module Support: NVIDIA Jetson TX2 NX Module 2. Power supply: DC 5V input 3. Structure: Embedded fan, aluminum alloy shell 4. Electrical parameters: 0.65W (5V/0.13A) 5. Cable length: 37+/-3mm 6. Fan: PWM speed control, 5500+/-10%RPMSpecification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs40HQ: 1162 cartons * 200 pcs = 232400 pcs
£9.99
-
Waveshare Waveshare DHT11 Temperature-Humidity Sensor, DHT11
Temperature-Humidity Sensor, DHT11 OnboardOverviewThis is a calibrated digital temperature and humidity module with onboard sensor DHT11. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications1. Temperature- Resolution : 1 degree C- Accuracy : +/-2 degree C- Measuring range : 0 degree C ~ 50 degree C2. Humidity- Resolution : 1%RH- Accuracy : +/-5%RH (0~50 degree C)- Measuring range : 20%RH ~ 90%RH (25 degree C)3. Operating voltage : 3.3V ~ 5.5 V4. Recommended storage condition- Temperature : 10 degree C ~40 degree C- Humidity : 60%RH or belowApplications1. Weather station2. Humidity controller3. Test & detection deviceHow to UseIn the case of working with a MCU:1. VCC: 3.3V ~ 5.5V2. GND: GND3. DOUT: MCU.IOPackage Contents1. DHT11 Temperature-Humidity Sensor x12. 3-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 4cm * 3cm * 1cm / 1.57inch * 1.18inch * 0.39inch Qty per Carton 7800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 7800 pcs = 2215200 pcs40HQ: 661 cartons * 7800 pcs = 5155800 pcs
£2.99
-
Waveshare Waveshare DHT22 Temperature-Humidity Sensor, DHT22
Overview1. This is a calibrated digital temperature and humidity module with onboard sensor DHT22 (AM2302), which features higher accuracy and wider measuring range than DHT11.2. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications1. Temperature- Resolution : 0.1degree C- Accuracy: +/-0.5 degree C- Measuring range: -40 degree C ~ 80 degree C2. Humidity- Resolution: 0.1%RH- Accuracy: +/-2%RH (25degree C)- Measuring range: 0%RH ~ 99.9%RH3. Operating voltage: 3.3V ~ 5.5 V4. Recommended storage condition- Temperature: 10 degree C ~40 degree C- Humidity: 60%RH or belowApplications1. Weather station2. Humidity controller3. Test & detection deviceHow to UseIn the case of working with a MCU:1. VCC: 3.3V ~ 5.5V2. GND: GND3. DOUT: MCU.IOSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs
£7.99
-
WAVESHARE Servidor serial RS485 a RJ45 con carril DIN y función POE de Waveshare
1. Fuente de alimentación: 9-24 V 2. Interfaz de comunicación: puerto RS485 x 1, puerto Ethernet x 1 3. Velocidad en baudios: 300-115200 bps 4. Bits de datos: 5-9 bits 5. Configuración: host, navegador web, biblioteca de funciones de gestión de dispositivos 6. Método de comunicación: comunicación directa TCP/IP, VCOM 7. Temperatura de trabajo: -40 grados a 85 grados. 8. Función principal: Transmisión de datos transparente bidireccional entre RS485 y Ethernet 9. Es fácil combinar servidores seriales instalados en múltiples rieles, lo que brinda mayor libertad. 10. Es adecuado para la actualización de la red Modbus y se puede utilizar junto con el software de configuración 3D. 11. Admite servidor TCP/cliente TCP/modo UDP/multidifusión UDP. 12. Soporte de sondeo continuo de múltiples host, fácil para la comunicación en la nube y la identificación de dispositivos. Especificación: Peso del paquete Peso de un paquete 0,14 kg/0,30 lb Un tamaño de paquete 12 cm x 8 cm x 6 cm (4,72 pulgadas x 3,15 pulgadas x 2,36 pulgadas) Cantidad por caja 100 Peso de la caja 16,00 kg/35,27 lb Tamaño de la caja 50 cm x 42 cm x 32 cm (19,69 pulgadas x 16,54 pulgadas x 12,6 pulgadas) Contenedor de carga 20GP: 396 cajas * 100 piezas = 39600 piezas 40HQ: 921 cajas * 100 piezas = 92100 piezas
£19.99
-
Waveshare Waveshare DSI Round Capacitive Touch Display IPS Display Panel 10-Point Touch, 3.4 inch, 4 inch
1. It supports 10-point touch. The actual number of touch points depends on the software system2. The tempered glass panel has a hardness of 6H3. The screen is fully adhered, providing excellent display and dust-proof performance4. The IPS display panel offers excellent display performance with a viewing angle of up to 170°5. It is widely applicable and can be used in smart home, vehicle-mounted devices, consumer electronics, industrial equipment, and other fieldsParameters1. Contrast ratio: 1200:12. Display chip: JD93653. Touch chip: GT9284. Communication interface: 2-lane MIPI DSI5. Operating temperature: 0℃ - 60℃6. Resolution: 3.4 inches: 800 x 800 pixels (H x V); 4 inches: 720 x 720 pixels (H x V)7. Color gamut: 3.4 inches: 70% NTSC; 4 inches: 60% NTSC8. Brightness: 3.4 inches: 300cd/square meter; 4 inches: 550cd/square meter9. Dimensions: 3.4 inches: 11.5 x 11.5 cm; 4 inches: 12.6 x 12.6 cm10. Display size: 3.4 inches: 8.76 x 8.76 cm; 4 inches: 10.152 x 10.152 cmPackaging list:- Display screen x 1- Screw pack x 1- MX1.25 2PIN to MX1.25 4PIN 150mm x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2PIN to 2.54 3PIN connecting cable x 1- FFC 22PIN crossover cable (opposite direction) x 2Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 15cm * 4cm / 5.91inch * 5.91inch * 1.57inch Qty per Carton 48 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 48 pcs = 24960 pcs40HQ: 1209 cartons * 48 pcs = 58032 pcs
£59.99 - £69.99
-
WAVESHARE Waveshare Dual ETH Mini-Computer for Raspberry Pi CM4, Gigabit Ethernet, 4CH Isolated RS485
Specifications1. CM4 Socket: Available on all variants of Compute Module 4 2. Network: Gigabit Ethernet RJ45 connector, 100M Ethernet RJ45 connector 3. USB: USB 2.0 Type A x 2 4. Connector: Isolated RS485 x 4, power screw terminal x 1 5. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) 6. Video: HD-MI interface x 1, support 4K 30fps output 7. RTC: Real Time Clock with Battery Socket and Ability to Wake Compute Module 4 8. Storage: MicroSD card slot for Compute Module 4 Lite (no eMMC) variant 9. Fan head: allow speed adjustment, 5V 10. Indicator: Power indicator x 1, CM4 status indicator x 1, User LED x 2, RS485 communication indicator x 8 11. Power input: 7-36V 12. Dimensions: 123 x 98 x 32mmPackage List1. CM4-ETH-RS485-BASE-B x 1 2. Metal case (top and bottom) x 1 3. Fan x 1 4. 12V 2A Power Supply x 1 5. Screwdriver x 1 6. Antenna connector rubber plug x 1 7. Screws pack x 1Specification: Package Weight One Package Weight 0.48kgs / 1.05lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 19.50kgs / 42.99lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs
£55.99
-
WAVESHARE Waveshare Dual Gigabit Ethernet 5G / 4G Base Board for Raspberry Pi CM4
Specifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Network: - Ethernet: Dual Gigabit Ethernet RJ45 - M.2 B KEY, for connecting 5G / 4G module - Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB 3.2 Gen1 x 2 4. PIN header: Raspberry Pi 40PIN GPIO headerx 1 5. Display: MIPI DSI port (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) 7. Video: HDMI x 2, supports 4K 30fps output 8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 10. Fan header: 5V/12V (12V by default), allows speed adjustment and measurement 11. Power input: 5V/2.5A 12. Size: 99.6 x 87.0mmSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.80kgs / 39.24lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£44.99
-
WAVESHARE Waveshare Dual Gigabit Ethernet 5G/4G Computer Box with Cooling Fan for Raspberry Pi CM4
1. CM4 Socket: Suitable for all variants of Compute Module 4 2. Networking: - Dual Gigabit Ethernet RJ45 - M.2 B KEY, for connecting 5G / 4G module - Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB: USB 3.2 Gen1 x 2 4. PIN header: Raspberry Pi 40PIN GPIO header 5. Display: MIPI DSI port (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) 7. Video: HDMI x 2, supports 4K 30fps output 8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 10. FAN HEADER: 5V/12V (12V by default), allows speed adjustment and measurement 11. Power input: 5V/2.5A 12. Size: 99.6 x 87.0mmSpecification: Package Weight One Package Weight 0.45kgs / 0.98lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs
£55.99
-
Waveshare Waveshare Dust Sensor
Overview1. Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm in diameter, even like the cigarette smoke2. Low power consumption, analog voltage output, the output level is linear with dust density3. Embedded voltage boost circuit to support wide range of power supplySpecifications1. Sensitivity : 0.5V/(100ug/m3)2. Measurement range : 500ug/m33. Power : 2.5V~5.5V4. Operating current : 20mA(max)5. Operating temperature : -10~65 degree C6. Storage temperature : -20~80 degree C7. Life time : 5 years8. Dimension : 63.2mmx41.3mmx21.1mm9. Mounting holes size : 2.0mm10. Air hole size : 9.0mmApplications1. Air purifier2. Air conditioner3. Air monitor4. PM2.5 DetectorHow to UseIn the case of working with a MCU:1. VCC: 2.5V ~ 5.0V2. GND: GND3. AOUT: MCU.IO (analog output)4. ILED: MCU.IO (module driving pin)Package Contents1. Dust Sensor × 12. XH2.54 4-pin wire × 1Specification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 5cm * 4cm * 1cm / 1.97inch * 1.57inch * 0.39inch Qty per Carton 4800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4800 pcs = 1329600 pcs40HQ: 644 cartons * 4800 pcs = 3091200 pcs
£9.99
-
Waveshare Waveshare ESP32-C6 0.85inch LCD Display Development Board, RISC-V Single-Core Processor, 128 × 128 Resolution, Supports AI Speech Interaction, 34519
1. The ESP32-C6-LCD-0.85 is a microcontroller development board supporting 2.4GHz Wi-Fi 6 and Bluetooth BLE 5. It features a custom-molded, compact, and stylish square plastic housing with a premium feel. The board integrates peripherals such as a 0.85-inch IPS color LCD, a Micro SD card slot, eight RGB LEDs, and a low-power audio codec chip, facilitating the development of multimedia and interactive applications. With these hardware resources, the board supports functions like image display, audio playback, and lighting control, making it suitable for both rapid prototyping and integration into end products for customization and further development. 2. Powered by the high-performance ESP32-C6 32-bit RISC-V processor, with a clock speed of up to 160 MHz3. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless connectivity; features an onboard antenna and excellent RF performance4. Built-in 512 KB SRAM, 320 KB ROM, and 8 MB Flash5. Uses a Type-C interface for enhanced user convenience and device compatibility6. Onboard 0.85-inch LCD screen with 128 × 128 resolution and 65K colors7. Onboard ring of 8 RGB LEDs, programmable for various dynamic lighting effects8. Onboard 3.7V MX1.25 interface for lithium battery charging and discharging9. Breakout pads for I2C, UART, etc., enabling connection to external devices, debugging, and flexible peripheral configuration10. Onboard Micro SD card slot providing expandable storage, fast data transfer, and flexibility; suitable for data logging and media playback, simplifying circuit design11. Includes onboard ES8311 audio codec chip, dual-microphone module, and other resourcesLCD Screen Specifications:1. Display resolution: 128 × 128 pixels2. Display colors: 65K3. Display panel: IPS4. Pixel pitch: 39.6 × 118.8 μm5. Interface type: 4-wire SPI6. Driver IC: ST77357. Display size: 15.21 × 15.21 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs40HQ: 958 cartons * 144 pcs = 137952 pcs
£13.99
-
WAVESHARE WAVESHARE ESP32-C6 1.3-Inch LCD Display Development Board, Without Pin Header, With Soldered Pin Header
1. Display panel: IPS2. Display size: 1.3 inches3. Display resolution: 240 x 240 pixels4. Display colors: 262K5. Communication interface: SPI6. Driver IC: ST77897. The ESP32-C6 is designed for the AIoT market, featuring a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor.8. Supports Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread). Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh.9. Supports ESP-IDF and Arduino, and comes with a complete SDK and open-source tutorials for easy learning and quick integration into applications.Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 7cm * 7cm * 4cm / 2.76inch * 2.76inch * 1.57inch Qty per Carton 280 Carton Weight 23.50kgs / 51.81lb Carton Size 51cm * 37cm * 34cm / 20.08inch * 14.57inch * 13.39inch Loading Container 20GP: 415 cartons * 280 pcs = 116200 pcs40HQ: 964 cartons * 280 pcs = 269920 pcs
£10.99
-
Waveshare Waveshare ESP32-C6 1.54inch E-Paper AIoT Development Board 200 × 200 Resolution Supports Wi-Fi, BLE 5, 34394
1. The ESP32-C6-ePaper-1.54 is an e-Paper AIoT development board, equipped with ESP32-C6 microcontroller, which supports Wi-Fi and BLE dual-mode communication. Onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency3. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance4. Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM, and external 16MB Flash memory5. Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle6. Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications7. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring8. Onboard TF card slot for external storage of images or files9. Onboard programmable PWR and BOOT side buttons for customized function development10. Reserved 2 × 6 2.54mm pitch pin header for convenient external expansionSpecifications:1. Display Panel: E-Ink display2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs
£17.99
-
Waveshare Waveshare ESP32-C6 1.64 Inch AMOLED Touch Display Development Board, 280 X 456 Resolution, Supports Wi-Fi 6 And BLE 5, Not Welded, Welded
1. Equipped with a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor, the high-performance processor has a clock speed up to 160 MHz, while the low-power processor can reach up to 20 MHz2. Integrated with Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, it has excellent radio frequency performance. 3. The board is equipped with an internal antenna and reserved solder pads, allowing it to be configured as an external antenna4. Onboard 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and an external 16MB Flash5. Onboard a 1.64-inch AMOLED capacitive touch screen with a resolution of 280 x 456 and 16.7M color6. The AMOLED screen uses the QSPI interface for display, and the capacitive touch uses the I2C interface7. Onboard a QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), which can detect motion posture and count steps, etc8. Onboard PWR and BOOT side buttons, BOOT supports custom key functions, making development more flexible9. Onboard a 3.7V MX1.25 lithium battery charging and discharging interface10. Onboard a Micro SD card slot, allowing external SD card storage for pictures or files11. Onboard a USB Type-C interface, which can be used for power supply and download debugging, facilitating development12. Exposed I2C, UART, and USB pins, available for external devices and debugging, allowing flexible configuration of peripheral functions13. The screen adopts a CNC processing structure with edge bonding, featuring a delicate and soft texture, and overall beauty and durabilityAMOLED screen parameters1. Display panel: AMOLED2. Display resolution: 280 x 456 pixels3. Display brightness: 350 cd/square meter4. Communication interface: QSPI5. Touch: supported6. Display size: 1.64 inches7. Display colors: 16.7M8. Contrast ratio: 60000:19. Driving IC: CO530010. Touch IC: FT6146Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 288 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 288 pcs = 118656 pcs40HQ: 958 cartons * 288 pcs = 275904 pcs
£25.99 - £26.99
-
WAVESHARE WAVESHARE ESP32-P4-Module Core Board, Based On ESP32-P4 And ESP32-C6 Dual-Chip Design, 16MB
1. Main controller chip: ESP32-P4NRW32 2. RF chip: ESP32-C6H8 3. PSRAM size: 32MB 4. Flash size: 16MB / 32MB5. RF band: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.3 6. Operating voltage: 3.3V 7. Connector type: Pin header, 1mm pitch8. Size: Approx. 25 x 25 x 3.3mmFeatures:1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip, supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Powerful image and audio processing capabilities; image and audio processing interfaces include a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder5. 32MB PSRAM stacked within the chip package, with 16MB / 32MB NOR Flash integrated outside the package (optional)6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and privilege separationSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 760 Carton Weight 16.20kgs / 35.71lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 760 pcs = 313120 pcs40HQ: 958 cartons * 760 pcs = 728080 pcs
£10.99
-
Waveshare Waveshare ESP32-P4-WIFI6 4.3inch Development Board, 480 × 800 Resolution, 5-Point Touch, Onboard Audio Codec Chip, Basic Model, With OV5647 Camera
1. This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It is equipped with a 4.3-inch 480 × 800 resolution IPS touch display. It supports rich human-machine interaction interfaces, including MIPI-CSI (with an integrated Image Signal Processor ISP). It also supports USB OTG 2.0 HS for high-speed connectivity and features an onboard 40PIN GPIO expansion interface, compatible with some Raspberry Pi HAT expansion boards, enabling broader application adaptation. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated Key Management Unit, ensuring data and operation security. It is specifically designed for high-performance and high-security applications, fully meeting the higher demands of embedded applications for human-machine interface support, edge computing capabilities, and IO connectivity features.2. Features a high-performance MCU with a RISC-V 32-bit dual-core and single-core processor.3. Onboard ESP32-C6-MINI module, a Wi-Fi 6 coprocessor, expanding the Wi-Fi 6 and BLE5 capabilities of the ESP32-P4.6. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM.7. Powerful image and audio processing capabilities. Image and audio processing interfaces include a JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H264 video encoder.8. The chip package includes stacked 32MB PSRAM, with an external 32MB Nor Flash integrated.9. Utilizes a Type-C interface, improving user convenience and device compatibility.10. Onboard 4.3-inch capacitive touch high-definition IPS screen, 480 × 800 resolution, capable of clearly displaying color images.11. Onboard 3.7V MX1.25 lithium battery charge/discharge interface.12. Exposes I2C, UART, USB, and multiple GPIOs for connecting external devices and debugging, allowing flexible peripheral configuration.13. Onboard Micro SD card slot, providing expanded storage, fast data transfer, and flexibility, suitable for data logging and media playback, simplifying circuit design.14. Onboard camera interface, supporting cameras like the OV5647 (MIPI-CSI).15. Security mechanisms: Secure Boot, Flash Encryption, Hardware Cryptographic Accelerator, and Hardware Random Number Generator. Also supports hardware access protection, enabling Access Permission Management (APM) and privilege separation. LCD Screen Parameters:1. Display Panel: IPS 2. Display Size: 4.3 inches 3. Display Resolution: 480 × 800 pixels 4. Viewing Angle: 160 degrees 5. Display Brightness: 500 cd/m2 6. Contrast Ratio: 1000:1 7. Communication Interface: MIPI-DSI 2-lane 8. Driver IC: ST7701 9. Touch Type: Capacitive Sensing 10. Touch Controller IC: GT911Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 54 pcs = 29916 pcs40HQ: 1286 cartons * 54 pcs = 69444 pcs
£34.99 - £44.99
Has visto 144 de 309 productos