Productos
-
LCD Screen and Digitizer Full Assembly for Tecno Pop 2 F, For Tecno Pop 2 F
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pop 2 F 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with Tecno: Pop 2 F Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Pop 3 Plus, For Tecno Pop 3 Plus
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pop 3 Plus 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Tecno: Pop 3 Plus Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Pop 4 BC2c, For Tecno Pop 4
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pop 4 BC2c 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Tecno: POP 4 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Pop 5 BD2, BD2p, BD3, BD1, For Tecno Pop 5(TFT)
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pop 5 BD2, BD2p, BD3, BD1 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Tecno: Pop 5 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Pouvoir 4 / Pouvoir 4 Pro LC7,LC8, For Tecno Pouvoir 4
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pouvoir 4 / Pouvoir 4 Pro LC7,LC8 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with Tecno: Pouvoir 4 pro, Pouvoir 4 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Pova 2 LE7, For Tecno Pova 2
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pova 2 LE7 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Tecno: Pova 2 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£8.99
-
LCD Screen and Digitizer Full Assembly for Tecno Pova LD7, For Tecno Pova
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Pova LD7 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 3.60kgs / 7.94lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs40HQ: 773 cartons * 40 pcs = 30920 pcs
£6.99
-
Mira Sales LCD Screen and Digitizer Full Assembly for Tecno Spark 2 KA7, For Tecno Spark 2
About the product1. Replacement LCD display + touch screen digitizer assembly for Tecno Spark 2 KA7. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with TECNO: Spark 2 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 4 Lite KC8S, For Tecno Spark 4 Lite KC8S
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 4 Lite KC8S 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Tecno: Spark 4 Lite Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 5 / Spark 5 Pro, For Tecno Spark 5 / Spark 5 Pro
Before Installation NotesBefore Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 5 / Spark 5 Pro 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with Tecno: Spark 5 pro, Spark 5 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 6 Air KE6, KE6j, For Tecno Spark 6 Air
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 6 Air KE6, KE6j 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Tecno: Spark 6 Air Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 6 KE7, For Tecno Spark 6
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 6 KE7 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with Tecno: Spark 6 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 7 Pro, For Tecno Spark 7 Pro
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 7 Pro 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with Tecno: Spark 7 Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro X659B, PR652B, X658E, PR652C, For Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro X659B, PR652B, X658E, PR652C, KF6, KF6j, KF6i, KF6k, PR651h, PR651, PR651E 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Tecno: Spark 8T, Spark 7 Infinix: Smart 5 Pro, Hot 10i Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 7P KF7j, For Tecno Spark 7P
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 7P KF7j 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with Tecno: Spark 7P Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 7T KF6p, For Tecno Spark 7T
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 7T KF6p 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with Tecno: Spark 7T Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 8 KG6, For Tecno Spark 8
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 8 KG6 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Tecno: Spark 8 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark 8P/Spark 8T KG6p KG7H, For Tecno Spark 8P/Spark 8T
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark 8P/Spark 8T KG6p KG7H 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Tecno: SPARK 8P Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark Go 2020 / Spark 6 Go KE5j KE5k KE5S, For Tecno Spark Go 2020
About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark Go 2020 / Spark 6 Go KE5j KE5k KE5S 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with Tecno: Spark 6 Go, Spark Go 2020 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£5.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark Go 2021, For Tecno Spark Go 2021
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark Go 2021 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Tecno: Spark Go Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark Go KC1, For Tecno Spark Go
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Tecno Spark Go KC1 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with TECNO: Spark Go Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Tecno Spark K7, For Tecno Spark
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Tecno Spark K7. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Tecno: SPARK Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£6.99
-
LCD Screen and Digitizer Full Assembly for Vivo iQOO Neo3 5G / IQOO Z1 V1986A / IQOO Z1X, For Vivo iQOO Neo3 5G
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Vivo iQOO Neo3 5G / IQOO Z1 V1986A / IQOO Z1X 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with Vivo: iQOO Neo3 5G Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£13.99
-
LCD Screen and Digitizer Full Assembly for Vivo S1 Pro V1832A V1832T (China) / V15 Pro, For Vivo V15 Pro(Original)
Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Vivo S1 Pro V1832A V1832T (China) / V15 Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with Vivo: S1 Pro, V15 Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs
£23.99
Has visto 864 de 1757 productos