Productos

Features:1. The BT-705 Battery Analyzer is designed specifically for testing 6V and 12V conventional flooded batteries, AGM flat batteries, AGM spiral batteries and gel batteries as well as 12V and 24V starting and charging systems.2. The BT-705 provides technicians with a fast, simple and affordable solution for checking battery health and detecting faults in starting and charging systems.3. Multiple vehicle applications - passenger cars and trucks4. Tests batteries rated from 100 to 2000CCA5. Tests multiple battery types - conventional flooded, AGM flat plate, AGM spiral and gel6. Tests multiple rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB7. Tests batteries directly on the vehicle - no need to disassemble the battery8. Detects bad batteries9. Quick and accurate display of test results in just 3 seconds10. Tests 12V and 24V charging systems11. Advanced starter/alternator testing12. Fast starter analysis without disabling the ignition13. No light, heat or sparking, and no discharge - safe operation for all levels of users14. Automatic temperature compensation15. Ripple voltage test for easy and intuitive fault checking16. Equipped with a large backlit LCD Display and menu-driven operation, extremely easy to use17. Optional Bluetooth printerProduct parameters:1. Display: 2.8-inch LCD screen, 128 x 64 pixels2. Supported languages: English/French/German/Spanish/Dutch/Russian/Italian3. Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)4. Storage temperature: -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit)5. Dimensions: 190 x 90 x 36mm6. Weight: 325 gramsPacking list:BT-705 Battery Analyzer x 1Instruction manual x 1Storage box x 1Specification: Package Weight One Package Weight 1.36kgs / 3.01lb One Package Size 24cm * 34cm * 9cm / 9.45inch * 13.39inch * 3.54inch Qty per Carton 8 Carton Weight 7.10kgs / 15.65lb Carton Size 50cm * 36cm * 38cm / 19.69inch * 14.17inch * 14.96inch Loading Container 20GP: 389 cartons * 8 pcs = 3112 pcs40HQ: 905 cartons * 8 pcs = 7240 pcs

Leer Más Menos

Features:1. The NT301 OBD2 Scanner allows you to read DTCs, locate bad O2 sensors, access emissions readiness status, turn off the CEL (Check Engine Light) or MIL, reset monitors, read live data, and retrieve your vehicles VIN.2. Live data graphing and logging, accurately reads error codes for most global cars, SUVs, light trucks, and 12V diesels equipped with OBD2. Graphing live vehicle sensor data enables you to focus on any suspicious data and trends.3. Read/Erase and I/M Ready hotkeys make it very easy to use the onboard computer reader right out of the box. Red, yellow, and green LEDs and a built-in speaker indicate readiness status, allowing you to confidently perform electronic emissions testing.4. No batteries required, the NT301 OBD2 Scanner charges directly from the 16-pin DLC in your vehicle.Product parameters:1. Display: 2.8-inch TFT color screen2. Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)3. Storage temperature: -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit)4. Power supply: 8 to 18 V, provided by the vehicle5. Supported protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230) and CAN (Control Area Network ISO 11898)6. Dimensions: 145 x 94 x 32mm7. Weight: 600 gramsSpecification: Package Weight One Package Weight 0.64kgs / 1.42lb One Package Size 27cm * 18cm * 5cm / 10.63inch * 7.09inch * 1.97inch Qty per Carton 48 Carton Weight 32.00kgs / 70.55lb Carton Size 54cm * 54cm * 35cm / 21.26inch * 21.26inch * 13.78inch Loading Container 20GP: 261 cartons * 48 pcs = 12528 pcs40HQ: 606 cartons * 48 pcs = 29088 pcs

Leer Más Menos

1. This ABS brake bleed scan tool will cycle the pump and valves for a tight brake pedal, this is an obd2 scanner with ABS auto bleed function. With step-by-step instructions, even beginners can easily navigate through it. Note: It is not suitable for vehicles that lack auto bleed function.2. NT630 Plus takes OBD-II diagnostics to a new level by customizing the functions of ABS and SRS systems. This SRS and ABS scanner provides in-depth insights into error code diagnostics, wheel speed sensors, airbag circuits, cable connector monitors, and more. Note: This scanner is not suitable for airbag crash data/programming issues.3. This obd2 scanner with ABS and SRS provides in-depth diagnosis of anti-lock brake system and SRS/airbags, and can also perform airbag light reset/SAS (steering angle sensor) adjustment/oil light reset daily reset service. These issues will be restored after the car fault is repaired. Note: Some classic vehicles without electronic control systems do not support reset service.4. The NT630 Plus ABS code reader can be directly connected to the OBD-II port. It will immediately diagnose all OBD-II modules, display real-time data, locate bad sensors and indicate I/M readiness status before the annual inspection. Guide you to perform maintenance work, reduce potential driving risks and maintain optimal driving performance.5. This car diagnostic scanner allows you to test all potential car faults in the ABS/airbag system, and the function will return to normal after exiting the program. Please note that only ABS/SRS modules are supported.6. With an intuitive LCD display and clear instructions, even beginners can use the NT630 Plus to diagnose car faults.7. The ergonomic touch screen has an anti-collision and anti-slip design, which is convenient for users to perform daily car diagnostic work. The unique sound when pressing the button notifies you that the task has been completed or the command has been executed.8. This car code reader comes with a sturdy storage box, which is convenient to carry and avoid damage.9. Graphic real-time data provides an intuitive view of the cars condition. The obd2 scanner with ABS and SRS will also save and support diagnostic data printouts to avoid unnecessary diagnostic fees when you have to find a professional mechanic to fix your cars fault instead of solving it yourself.Warm Tips:1. The coverage and functions will vary for different brands and models, so please check the coverage before purchasing.3. Some vehicles do not support automatic VIN, so please use manual VIN input.4. NT630 Plus is a diagnostic tool, not a repair tool.5. NT630Plus does not support tire pressure/transmission/program/engine electronic control functions.6. Some vehicles only support automatic deflation on one side or single wheel.Product parameters:1. Detection system: engine, ABS, SRS, SAS2. Display: 2.8-inch TFT color screen3. Supported languages: English, Spanish, French, Russian, Portuguese, Dutch, German, Thai, Italian, Swedish, Hungarian, Japanese, Korean4. External power supply: 8-18V, powered by vehicle battery5. Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)6. Storage temperature: -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit)7. Product size: 200 x 100 x 38mm8. Weight: 600 gramsSpecification: Package Weight One Package Weight 0.95kgs / 2.10lb One Package Size 22cm * 17cm * 9cm / 8.66inch * 6.69inch * 3.54inch Qty per Carton 30 Carton Weight 28.50kgs / 62.83lb Carton Size 47cm * 46cm * 53cm / 18.5inch * 18.11inch * 20.87inch Loading Container 20GP: 232 cartons * 30 pcs = 6960 pcs40HQ: 540 cartons * 30 pcs = 16200 pcs

Leer Más Menos