Productos
-
Waveshare Waveshare Solar Panel (6V 5W), 16158
Specifications1.Solar cell type: 156 monocrystalline cell2.Surface: toughened glass3.Frame material: anodic oxidation aluminum alloy4.Back board material: 0.25mm PET5.Power: 5.0W ± 5%6.Operating voltage: 6.0V ± 5%7.Operating current: 833mA ± 5% (max)8.Open circuit voltage: 7.2V ± 5%9.Short circuit current: 916mA ± 5%10.For use with: Solar Power ManagerNote: specifications above are tested on standard condition: 1000W/m2 radiation intensity, 25℃, AM1.5 air quality.Specification: Package Weight One Package Weight 0.73kgs / 1.61lb One Package Size 25cm * 21cm * 4cm / 9.84inch * 8.27inch * 1.57inch Qty per Carton 25 Carton Weight 18.30kgs / 40.34lb Carton Size 61cm * 50cm * 40cm / 24.02inch * 19.69inch * 15.75inch Loading Container 20GP: 218 cartons * 25 pcs = 5450 pcs40HQ: 507 cartons * 25 pcs = 12675 pcs
£9.99
-
Waveshare Módulo de gestión de energía solar Waveshare para panel solar de 6 V ~ 24 V, 16120
Descripción general Este módulo de gestión de energía solar está diseñado para paneles solares de 6 V a 24 V. Puede cargar la batería de litio de 3,7 V a través del panel solar o una conexión USB y proporciona una salida regulada de 5 V/1 A. El módulo cuenta con función MPPT (seguimiento del punto de máxima potencia) y circuitos de protección múltiple, por lo que puede seguir funcionando con alta eficiencia, estabilidad y seguridad. Es adecuado para proyectos de protección ambiental, IoT de bajo consumo y energía solar. Características 1. Admite la función MPPT (seguimiento del punto de máxima potencia), lo que maximiza la eficiencia del panel solar. 2. Admite carga de batería mediante panel solar/conexión USB 3. Para panel solar de 6 V ~ 24 V, entrada de conector DC-002 o entrada de terminal de tornillo 4. Interruptor MPPT SET integrado, selecciona el nivel cerrado al nivel de entrada para mejorar la eficiencia de carga 5. Dos interfaces de salida de 5 V: conectores de pines y puerto USB 6. Condensador electrolítico de aluminio de alta capacidad integrado y condensador cerámico SMD, que reduce la ondulación y ofrece un rendimiento estable. 7. Soporte de batería 14500 y conector de batería PH2.0, para conectar varios tipos de baterías de litio de 3,7 V 8. Varios indicadores LED, para monitorear el estado del panel solar y la batería. 9. Circuitos de protección múltiple: sobrecarga / sobredescarga / protección inversa / sobrecalentamiento / sobrecorriente, estable y seguro de usar. Presupuesto 1. Voltaje de entrada del panel solar (SOLAR IN): 6 V ~ 24 V 2. Voltaje de entrada micro USB (USB IN): 5 V 3. Conector de clavija/salida USB (USB OUT): 5 V 1 A 4. Tensión de corte de carga: 4,2 V +/-1 % 5. Voltaje de protección contra sobredescarga: 2,9 V +/-1 % 6. Eficiencia de carga del panel solar: ~78% 7. Eficiencia de carga USB: ~82% 8. Eficiencia de salida de refuerzo de batería de 3,7 V: ~86 % 9. Corriente máxima en reposo: <2 mA 10. Temperatura de funcionamiento: -40 ~ 85 °C 11. Dimensiones: 65,2 mm x 56,2 mm x 22,9 mm Especificación: Peso del paquete Peso de un paquete 0,06 kg/0,12 lb Un tamaño de paquete 8 cm x 8 cm x 2 cm (3,15 pulgadas x 3,15 pulgadas x 0,79 pulgadas) Cantidad por caja 500 Peso de la caja 24,50 kg/54,01 lb Tamaño de la caja 40 cm * 40 cm * 40 cm / 15,75 pulgadas * 15,75 pulgadas * 15,75 pulgadas Contenedor de carga 20GP: 416 cajas * 500 piezas = 208000 piezas 40HQ: 967 cajas * 500 piezas = 483500 piezas
£8.99
-
WAVESHARE Administrador de energía solar de Waveshare (C)
Precauciones de seguridad 1. Las baterías de iones de litio y de polímero de litio son bastante inestables. Pueden provocar incendios, lesiones personales o daños materiales si no se recargan o utilizan correctamente. 2. No invierta la polaridad al recargar o descargar la batería. No utilice un cargador o panel de carga de calidad inferior para recargar la batería. 3. No mezcle baterías viejas con nuevas, evite utilizar baterías de diferentes marcas. 4. Al comprar una batería de litio, asegúrese de que las especificaciones de la batería sean compatibles con la placa de expansión. Elija baterías de un fabricante oficial y asegúrese de que funcionen de manera estable y segura mediante una prueba de envejecimiento. 5. Las baterías de litio tienen una vida útil limitada y se deterioran con el paso del tiempo. Deben reemplazarse por otras nuevas cuando alcancen su vida útil máxima o cuando funcionen durante más de dos años, lo que ocurra primero. 6. Debe colocarse con cuidado y de forma adecuada, manteniéndolo alejado de artículos inflamables y explosivos, fuera del alcance de los niños, evitando cualquier accidente de seguridad causado por un almacenamiento descuidado. Características El Solar Power Manager (C) es compatible con paneles solares generales de 6 V ~ 24 V. Puede recargar baterías de iones de litio recargables 18650 a través de un panel solar o una conexión USB TIPO C, y proporciona una salida regulada de 5 V/3 A (compatible con múltiples protocolos, incluidos PD/QC/FCP/PE/SFCP). El módulo cuenta con función MPPT (seguimiento del punto de máxima potencia) y circuitos de protección múltiple, por lo que puede seguir funcionando con alta eficiencia, estabilidad y seguridad. Es adecuado para proyectos de protección ambiental, IoT de bajo consumo y energía solar. 1. Admite la función MPPT (seguimiento del punto de máxima potencia), maximiza la eficiencia del panel solar. 2. Recarga flexible de batería: desde panel solar o adaptador de corriente USB TIPO C 3. Compatible con paneles solares de 6 V ~ 24 V, entrada de conector DC-002 o entrada de terminal de tornillo 4. Interruptor MPPT SET integrado, selecciona el nivel cerrado al nivel de entrada para mejorar la eficiencia de recarga 5. Condensador electrolítico de aluminio integrado y condensador cerámico SMD, que reduce la ondulación y ofrece un rendimiento estable. 6. Soporte de batería integrado, compatible con 3 baterías recargables de iones de litio 18650 7. Varios indicadores LED, para monitorear el estado del panel solar y la batería. 8. Circuitos de protección múltiple: sobrecarga / sobredescarga / a prueba de reversa / sobrecalentamiento / sobrecorriente, estable y seguro de usar. Presupuesto 1. Entrada solar: 6 V ~ 24 V (18 V por defecto) 2. Recarga: Panel solar, adaptador de corriente, USB 3. Batería: 3 baterías de iones de litio 18650 (no incluidas) 4. Entrada USB: 5 V (tipo C, con soporte de carga rápida PD) 5. Salida de 5 V: 5 V/3 A (salida USB, tipo C) 6. Tensión de corte de recarga: 4,2 V +/- 1 % 7. Voltaje de protección contra sobredescarga: 3,0 V +/- 1 % 8. Eficiencia de recarga del panel solar: ~78% 9. Eficiencia de recarga USB: ~93% 10. Las baterías aumentan la eficiencia: ~92% 11. Caja: Caja de metal 12. Tamaño: 119,0 x 71,0 x 25,2 mm 13. Lista de paquetes: - Gestor de energía solar (C) x1 - Adaptador x1 Especificación: Peso del paquete Peso de un paquete 0,24 kg/0,54 lb Un tamaño de paquete 20 cm x 15 cm x 5 cm (7,87 pulgadas x 5,91 pulgadas x 1,97 pulgadas) Cantidad por caja 40 Peso de la caja 9,00 kg/19,84 lb Tamaño de la caja 42 cm x 32 cm x 27 cm (16,54 pulgadas x 12,6 pulgadas x 10,63 pulgadas) Contenedor de carga 20GP: 734 cajas * 40 uds. = 29360 uds. 40HQ: 1705 cajas * 40 piezas = 68200 piezas
£20.99
-
WAVESHARE Administrador de energía solar Waveshare, batería de polímero de litio integrada de 10 000 mAh, compatible con paneles solares de 6 V a 24 V, 19799
Características El Solar Power Manager (B) es compatible con paneles solares generales de 6 V ~ 24 V. Puede recargar la batería recargable de polímero de litio de 3,7 V a través del panel solar o la conexión USB TIPO C, y proporciona una salida regulada de 5 V/3 A (compatible con múltiples protocolos, incluidos PD/QC/FCP/PE/SFCP). El módulo cuenta con función MPPT (seguimiento del punto de máxima potencia) y circuitos de protección múltiple, por lo que puede seguir funcionando con alta eficiencia, estabilidad y seguridad. Es adecuado para proyectos de protección ambiental, IoT de bajo consumo y energía solar. 1. Admite la función MPPT (seguimiento del punto de máxima potencia), lo que maximiza la eficiencia del panel solar. 2. Recarga flexible de batería: desde panel solar o adaptador de corriente USB TIPO C 3. Compatible con paneles solares de 6 V ~ 24 V, entrada de conector DC-002 o entrada de terminal de tornillo 4. Interruptor MPPT SET integrado, selecciona el nivel cerrado al nivel de entrada para mejorar la eficiencia de recarga 5. Condensador electrolítico de aluminio integrado y condensador cerámico SMD, que reduce la ondulación y ofrece un rendimiento estable. 6. Conector de batería PH2.0, con batería de litio recargable incorporada de 10000 mAh y 3,7 V 7. Varios indicadores LED, para monitorear el estado del panel solar y la batería. 8. Circuitos de protección múltiple: sobrecarga / sobredescarga / a prueba de reversa / sobrecalentamiento / sobrecorriente, estable y seguro de usar. Especificación: Peso del paquete Peso de un paquete 0,35 kg/0,77 lb Un tamaño de paquete 20 cm x 15 cm x 5 cm (7,87 pulgadas x 5,91 pulgadas x 1,97 pulgadas) Cantidad por caja 40 Peso de la caja 13,00 kg/28,66 lb Tamaño de la caja 42 cm x 32 cm x 27 cm (16,54 pulgadas x 12,6 pulgadas x 10,63 pulgadas) Contenedor de carga 20GP: 734 cajas * 40 uds. = 29360 uds. 40HQ: 1705 cajas * 40 piezas = 68200 piezas
£20.99
-
Waveshare Waveshare Sound Sensor
Overview1. Onboard audio power amplifier LM3862. Audio signal gain up to 2003. Adjustable accuracy4. Signal output indicatorSpecifications1. Mic sensitivity: 52dB2. Frequency range: 50Hz ~ 20KHz3. Power: 3.3V ~ 5.3V4. Mounting holes size: 2.0mmApplications1. Audio amplifier2. Ambient sound detection3. Sound level detection (unable to get exact dB value)How to UseIn the case of working with a MCU:1. VCC: 3.3V ~ 5.3V2. GND: Power supply ground3. AOUT: MCU.IO (analog output)4. DOUT: MCU.IO (digital output)Package Contents1. Sound Sensor x12. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs
£2.99
-
Waveshare Waveshare Speaker for Micro:bit, Music Player
OverviewSpeaker expansion module designed for micro:bit, makes your micro:bit become a music player easily.Furthermore, it can also be used for Arduino development, compatible with 3.3V/5V Arduino boards.Features1. Onboard Hi-Fi chip NS80022. Sound volume adjustment3. Earphone jack output4. Comes with development resources (micro:bit graphical demo/python code/Arduino demo/user manual, etc.)Specifications1. Operating voltage: 2.0V ~ 5.5V2. Dimension: 36.52mm x 43.44mm3. Through holes diameter: 3.2mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 6cm * 5cm * 2cm / 2.36inch * 1.97inch * 0.79inch Qty per Carton 1600 Carton Weight 86.40kgs / 190.48lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1600 pcs = 443200 pcs40HQ: 644 cartons * 1600 pcs = 1030400 pcs
£7.99
-
Waveshare ST-LINK/V2 (EN), STM Programmers & Debuggers
Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs
£42.99
-
Waveshare Waveshare SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi, Applicable for Europe / Asia / Africa, 868MHz
Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs
£21.99
-
Waveshare Waveshare SX1262 LoRa HAT 915MHz Frequency Band for Raspberry Pi, Applicable for America / Oceania / Asia, 915MHz
Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs
£22.99
-
Waveshare Waveshare TCS34725 Color Sensor Module, High Sensitivity, I2C interface, Color
OverviewThis is a color sensor module based on TCS34725, will output RGB data and light intensity through the I2C interface. Its advantages include high sensitivity, wide dynamic range, accurate measuring, etc.Features1. Onboard TCS34725FN, embedded ADC, high sensitivity, wide dynamic range2. I2C communication, uses a few pins3. Integrates IR blocking filter, minimizes the IR spectral component of the incoming light4. Outputs RGB data without white balance5. Outputs light intensity, feels the light like human eyes6. Supports light intensity interrupt output, programmable upper and lower thresholds7. Supports fill-light by onboard LED, adjustable brightness by PWM8. Onboard voltage level translator, compatible with 3.3V/5V operating voltage9. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Sensor: TCS34725FN2. Communication interface: I2C3. Operating voltage: 3.3V/5V4. Dimension: 27mm × 20mm5. Resolution: 4-ch RGBC, 16-bit per ch6. Recommended measuring distance: 2mmApplications1. Sorting by color2. Ambient light sensing and calibration3. Products color identification and classificationPinouts1. VCC: 3.3V/5V power input2. GND: ground3. SDA: I2C data input4. SCL: I2C clock input5. INT: Interrupt output (open drain output)6. LED: Light emitting diodePackage Contents1. TCS34725 Color Sensor x12. PH2.0 6PIN wire 20cm x1Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 5cm * 2cm * 1cm / 1.97inch * 0.79inch * 0.39inch Qty per Carton 9600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 9600 pcs = 2659200 pcs40HQ: 644 cartons * 9600 pcs = 6182400 pcs
£6.99
-
WAVESHARE Waveshare Type-C / USB-C to UART High Band Rate Transmission Module Connectors, USB-C
Features1. Adopt new version CH343G chip. Compared with CH340G, it supports higher data rate (up to 6Mbps) and more serial port IO levels (5V / 3.3V / 2.5V / 1.8V) 2. Support Mac, Linux, Android, Windows 7/8/8.1/10/11 3. Onboard resettable Fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improve shock resistance, stable and safe communication performance 4. Onboard IO protection circuits, anti-surge, anti-static, stable and safe communication performance 5. Onboard 3.3V and 5V TTL level switch pins for selecting TTL communication level 6. Support 3.3V/5V output (the module is powered by USB, and the onboard jumper should be shorted to 3.3V or 5V accordingly) 7. Adopt double-sided black immersion gold process, which is durable and has a good lookIndictor Description1. PWR: Power indicator, turn on when the voltage is detected from USB interface 2. RXD: Receiving indicator, turn on when data is sent back from the device interface 3. TXD: Sending indicator, turn on when data is sent from USBPinouts Definition1. VCC: 5V or 3.3V output for external device (configured by jumper) 2. GND: Ground 3. TXD: Connects to MCU.RXD 4. RXD: Connects to MCU.TXD 5. RTS: Connects to MCU.CTS 6. CTS: Connects to MCU.RTSSpecifications1. Host interface: USB 2. Device interface: UART 3. Communication range: 50bps ~ 6Mbps 4. USB device interface: USB Type-C 5. Protection: resettable Fuse, ESD protection 6. UART interface connector: 6-pin right-angle pinheader 7. Protection: IO protection diodeSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 400 Carton Weight 7.00kgs / 15.43lb Carton Size 52cm * 35cm * 35cm / 20.47inch * 13.78inch * 13.78inch Loading Container 20GP: 418 cartons * 400 pcs = 167200 pcs40HQ: 971 cartons * 400 pcs = 388400 pcs
£2.99
-
Waveshare Waveshare UART Fingerprint Reader Fingerprinting Sensor Module
UART Fingerprint Reader, onboard processor STM32F205, commercial fingerprinting algorithm, optical sensorOverviewUART Fingerprint Reader is a fingerprinting module designed for secondary development, high-speed for identification, high stability. It is an intelligent module that provides functionalities like fingerprint recording, image processing, feature extraction, template generation, template storage, fingerprint matching and searching, etc.Features1. Onboard high-speed processor STM32F2052. Commercial fingerprinting algorithm, faster identification3. High-accuracy optical sensor, standard 16-pin interface, allows users to choose optical/semiconductor sensors4. Divided structure: fingerprint sensor + processing circuit + algorithm platform5. Easy for developing, controlled via UART, supports any MCU with UART6. Open protocol, it is available to freely input/output fingerprint images, fingerprint feature file and other fingerprinting actionsPackage Contents1. UART Fingerprint Reader × 12. 6-pin custom connector jumper wire × 1Specification: Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs
£49.99
-
Waveshare Waveshare Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless, 15823
Overview1. This is a universal driver board for e-Paper raw panels, thanks to the dual wireless features - WiFi & Bluetooth - it is easy to display images from PC / smart phone via WiFi or Bluetooth.2. Furthermore, it can also be used for Arduino development, just like any other normal Arduino board.Features1. Onboard ESP32, supports Arduino development2. Provide Android APP, allows to refresh display content via Bluetooth EDR3. Provide HTML host code, allows to refresh display content via remote webpage, suit for Internet applications4. Support Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image5. Support popular image formats: BMP, JPEG, GIF, PNG, etc.6. Easy to be integrated into wireless applications7. Come with e-Paper driver (open source)8. Come with development resources and manualSpecifications1. WiFi protocol: 802.11b/g/n2. Bluetooth protocol: 4.2, includes traditional BR/EDR, and low power BLE3. Interface: 3-wire SPI, 4-wire SPI (default)4. Operating voltage: 5V5. Operating current: 50mA ~ 150mA6. Outline dimension: 29.46mm x 48.25mmPackage Contents1. e-Paper ESP32 Driver Board x12. e-Paper Adapter x13. 24PIN FFC x1Note: e-Paper panels in the photos are NOT included.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs
£11.99
-
WAVESHARE Waveshare USB 3.2 Gen1 to Gigabit Ethernet Converter Module, Driver-Free
1. This USB 3.2 Gen1 to Gigabit Ethernet wired Internet module incorporates Realtek original high performance controller RTL8153, with features including multi systems compatibility, driver-free, plug-and-play, supports systems like Win7/8/8.1/10, Mac, Linux, Android, and so on. 2. Easily providing wired Gigabit Ethernet connection for devices which has no Ethernet port or broken NIC, fast data rate, low latency, stable performance, smooth experience for gaming or HD movies. Specifications: 1. Controller: RTL8153 2. ETH port: RJ45 Gigabit Ethernet 3. USB: USB 3.2 Gen1 (data rate will be downgraded while connecting with a USB 2.0 port) 4. Network standard: 10/100/1000Mbps 5. System support: Win7/8/8.1/10, Mac, Linux, Android 6. Cable length: About 15cm (measured manually, for reference ONLY) 7. Status indicator: The green light keeps on, the yellow light keeps blinking Package list: 1. USB 3.2 Gen1 TO Gigabit ETH x 1 2. USB Type-A extension cable x 1Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 10cm * 8cm * 1cm / 3.94inch * 3.15inch * 0.39inch Qty per Carton 300 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 300 pcs = 169800 pcs40HQ: 1314 cartons * 300 pcs = 394200 pcs
£12.99
-
Waveshare Convertidor aislado industrial USB a RS232/RS485/TTL de Waveshare, 15817
Descripción general Este es un convertidor aislado USB a RS232/485/TTL industrial con FT232RL original en su interior. Cuenta con circuitos de protección integrados, como aislamiento de potencia, aislamiento magnético ADI y diodo TVS, etc. Además, el USB TO RS232/485/TTL viene con una carcasa de aleación de aluminio, lo que lo hace sólido y duradero. El USB a RS232/485/TTL es muy fácil de usar y transmite y recibe de forma totalmente automática y sin demoras. Debido a su rápida comunicación, estabilidad, confiabilidad y seguridad, es una opción ideal para equipos de control industrial y/o aplicaciones con altos requisitos de comunicación. Características 1. USB A RS232, USB A RS485, USB A TTL (UART) 2. Adopte el FT232RL original, comunicación rápida, estable y confiable, mejor compatibilidad. 3. Aislamiento de fuente de alimentación unibody integrado, proporciona un voltaje aislado estable, no necesita fuente de alimentación adicional para el terminal aislado 4. Aislamiento magnético unibody integrado, permite aislamiento de señal, alta confiabilidad, fuerte antiinterferencia, bajo consumo de energía. 5. TVS (supresor de voltaje transitorio) integrado, suprime eficazmente el voltaje de sobretensión y los picos de voltaje transitorios en el circuito, a prueba de rayos y antielectrostático 6. Fusible de autorrecuperación incorporado y diodos de protección, garantizan salidas de corriente/voltaje estables, brindan protección contra sobrecorriente/sobrevoltaje y mejoran la resistencia a los golpes. 7. Circuito transceptor completamente automático sin demora, garantiza que el puerto USB se comunique con diferentes interfaces de manera rápida y estable, sin interferir entre sí. 8. Traductor de voltaje serial TTL de 3,3 V/5 V integrado, configure el nivel TTL mediante interruptor 9. Carcasa de aleación de aluminio con chorro de arena y oxidación anódica, apertura mediante proceso CNC, sólida y duradera. 10. 3 LED para indicar el estado de energía y del transceptor 11. Conectores USB-B y RS232 de alta calidad, conexión y desconexión suaves. Presupuesto 1. Tipo de producto: convertidor industrial con aislamiento óptico 2. Velocidad en baudios: 300-921600 bps 3. Puerto host: USB 4. Puerto del dispositivo: RS485/RS232/TTL 5. USB: - Voltaje de funcionamiento: 5V - Conector: USB-B - Protección: Fusible de autorrecuperación de 200 mA, salida aislada - Distancia de transmisión: ~5m 6. RS485: - Conector: terminal de tornillo - Pines: A+, B-, GND - Control de dirección: control automático de hardware - Protección: protección contra rayos y sobretensiones de 600 W, protección ESD de 15 KV (almohadillas de soldadura con resistencia de equilibrio reservada de 120 R) - Distancia de transmisión: ~1200m - Modo de transmisión: punto a multipunto (hasta 32 nodos, se recomienda utilizar repetidores para 16 nodos o más) 7. RS232: - Conector: DR9 macho - Protección: diodo TVS, protección contra sobretensiones, protección ESD - Distancia de transmisión: ~15m - Modo de transmisión: punto a punto 8. TTL (UART): - Voltaje de funcionamiento: 3,3 V/5 V - Conector: terminal de tornillo - Pines: TXD, RXD, GND - Protección: diodo de protección de abrazadera, a prueba de sobretensión/voltaje negativo, resistencia a golpes - Modo de transmisión: punto a punto 9. Indicadores LED: - PWR: indicador de encendido rojo, se ilumina cuando hay conexión USB y se detecta voltaje - TXD: indicador TX verde, se ilumina cuando el puerto USB envía datos - RXD: indicador RX azul, se ilumina cuando los puertos del dispositivo envían datos de vuelta 10. Entorno operativo: - Temperatura: -15℃ ~ 70℃ - Humedad: 5% HR ~ 95% HR 11. Sistema operativo: Windows 10 / 8.1 / 8 / 7 / XP 12. Contenido del paquete: - USB A RS232/485/TTL x1 - Cable USB x1 Especificación: Peso del paquete Peso de un paquete 0,29 kg/0,64 lb Un tamaño de paquete 10 cm x 9 cm x 5 cm (3,94 pulgadas x 3,54 pulgadas x 1,97 pulgadas) Cantidad por caja 192 Peso de la caja 15,00 kg/33,07 lb Tamaño de la caja 60 cm x 36 cm x 40 cm (23,62 pulgadas x 14,17 pulgadas x 15,75 pulgadas) Contenedor de carga 20GP: 308 cajas * 192 uds. = 59136 uds. 40HQ: 716 cajas * 192 piezas = 137472 piezas
£19.99
-
Waveshare Waveshare USB3300 USB HS Board
OverviewThe USB3300 USB HS Board is an accessory board which acts as the USB high-speed external PHY device for ULPI interface, features the USB3300, MIC2075-1BM onboard.FeaturesUSB3300, MIC2075-1BM, ULPI interfaceSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 728 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 39cm / 22.05inch * 15.75inch * 15.35inch Loading Container 20GP: 305 cartons * 728 pcs = 222040 pcs40HQ: 708 cartons * 728 pcs = 515424 pcs
£9.99
-
Waveshare Waveshare W25QXX DataFlash Board, W25QXX
Serial DataFlash Module with W25Q128JV Onboard, SPI InterfaceOverview1. Onboard serial NOR Flash memory W25Q128JV2. Support Standard/Dual/Quad SPI3. Support STM32F7 series Quad-SPI interface, provides related cube library demoFeatures1. Capacity: 128M-bit / 16M-byte2. Max frequency: =<133MHz3. Operating voltage: 2.7~3.6V4. Operating temperature: -40 degree C ~ +85 degree CDimension: 20.6mm x 38.9mmSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 324.48kgs / 715.35lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs
£4.99
-
WAVESHARE Waveshare WAVEGO 12-DOF Bionic Dog-Like Robot, Basic Version, Basic Version
FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs
£180.99
-
WAVESHARE Waveshare WAVEGO 12-DOF Bionic Dog-Like Robot, Extension Pack, Extension Pack
FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 554g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 200g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x 30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x 4 16. 4 PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.08kgs / 2.37lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs
£200.99
-
Waveshare Waveshare WAVEGO Pro 12-DOF Bionic Dog-Like Robot Open Source For ESP32 And Raspberry Pi, Basic, EX, Pi 5
1. The entire machine has 12 degrees of freedom, with a multi-link structure design for the legs, which increases the effective torque of the servo motors2. It uses 2.3kg.cm serial bus servos, which can provide real-time feedback on position, speed, and input voltage, etc3. A real-time operating system serves as the lower-level machine for gait generation and link inverse solution, relieving the computing burden of the upper-level machine and improving the efficiency of gait calculation4. The ultra-compact structure design can be used on a desktop, with the structure made of aluminum alloy and HP nylon materials, reducing weight while maintaining structural strength5. The Raspberry Pi can be expanded as the upper-level machine, using OpenCV-related advanced functions. The routine includes face detection, motion detection, and color tracking functions. It reserves expansion interfaces and comes with rich user manuals and secondary development documents6. It has attitude self-balancing, with a high-precision 9-axis motion tracker ICM20948 that can adapt to various terrain environments and control its own balance7. Login to the Web to remotely control, without the need for manual configuration of the compilation environment. The machine starts up and automatically establishes a Wi-Fi hotspot. It can be connected and logged into the control page using a mobile phone or computer browser, without the need to download an app8. It can record actions and perform one-click playback. The robot dog can save the control robots JSON instructions as a task file, which is saved in the Flash of the ESP32 and will not be lost after power loss. The robot dog can execute complex repetitive operations by calling these task filesParameters1. Standing: length 218mm, width 116mm, height 152mm2. Lying down: length 228mm, width 116mm, height 127mm3. Total weight:- Basic: 465g (including battery)- EX / PI5 kit: 554g (including battery)4. Degrees of freedom: total 12, per leg 3Operating system1. Provided routines: FreeRTOS + Raspberry Pi OSMotion performance1. Supported actions: handshake, stand, slow squat, diagonal gait, jump, self-balancing2. Motion extensions: action programming routines provided, including flexible velocity functions (Bezier curves)3. Maximum load capacity- Basic: 300g- EX / PI5 kit: 200gServo information1. Servo dimensions: 23.2 x 12.0 x 25.5 mm2. Servo weight: 13g ± 1g3. Working voltage: 6V4. No-load speed: 0.1sec/60° (100RPM)5. Stall torque: 2.3kg.cm (31.99oz.in)6. Rated load: 0.7kg.cm7. Rated current: 400mA8. Control mode: digital signal9. Control protocol type: half-duplex asynchronous serial communication Visual function1. FreeRT OS Routine: web-based real-time video transmission2. Raspberry Pi OS routine: real-time video transmission, face detection, color tracking, motion object detection3. Note: all the codes are open source. The routines in Raspberry Pi OS are developed based on the open-source projects flask-streaming and OpenCVProcessor and storage1. Lower-level device (ESP32):- Processor: Xtensa LX6 dual-core 240 MHz- SRAM: 520KB + 8MB- Flash memory: 448KB + 4MBOthers1. Wi-Fi standard: 802.11b/g/n2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and low-power Bluetooth (BLE)3. External interfaces:- 2 x 5P multi-functional expansion interfaces (for upper computer communication and power supply)- DC charging port- Type-C (for downloading, serial communication, and peripheral expansion)4. Power supply parameters- Battery type: 18650 lithium-ion battery- Power supply voltage: 7V - 8.4V- Charging voltage: 8.4V- Capacity of a single battery: 2000mAh- Number of batteries: 2- Battery protection: anti-overcharge, anti-overdischarge, anti-overcurrent, anti-short circuit, anti-reverse connection, balanced charging, stable operation and safer- Output voltage: can output 5V power supply, convenient for powering other main control boardsBasic package contents:- WAVEGO Pro (Pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1EX package contents:- WAVEGO Pro EX (Pre-assembled before shipping) x 1- Raspberry Pi expansion pack x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Pi 5 kit package contents:- PI5 WAVEGO Pro kit (Built-in 4GB Pi5, pre-assembled before shipping) x 1- Accessory kit x 1- Power supply x 1- Packaging box x 1Specification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 28cm * 24cm * 16cm / 11.02inch * 9.45inch * 6.3inch Qty per Carton 4 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 34cm * 30cm / 19.69inch * 13.39inch * 11.81inch Loading Container 20GP: 522 cartons * 4 pcs = 2088 pcs40HQ: 1213 cartons * 4 pcs = 4852 pcs
£274.99 - £370.99
-
Waveshare Módulo de audio CODEC estéreo Waveshare WM8960, reproducción/grabación, módulo de audio CODEC estéreo
Descripción general Este módulo de audio de bajo consumo se basa en WM8960, admite codificación/decodificación estéreo, admite grabación de sonido y, además, puede controlar directamente los altavoces para reproducir música. Características 1. Integra un micrófono de silicio MEMS de alta calidad, admite grabación de sonido. 2. Conector para auriculares de 4 segmentos de 3,5 mm estándar integrado, que permite la grabación de sonido a través de auriculares externos con micrófono. 3. Interfaz de altavoz de doble canal integrada, que controla directamente los altavoces. 4. Admite frecuencias de muestreo de audio comunes como 8/11.025/22.05/44.1/48 KHz, etc. 5. Admite efectos de sonido como estéreo, envolvente 3D, etc. 6. Viene con recursos de desarrollo y manual (ejemplos de STM32 para reproducir y grabar) Presupuesto 1. CÓDEC: WM8960 2. Voltaje de funcionamiento: 3,3 V 3. Interfaz de control: I2C 4. Interfaz de audio: I2S 5. Formato de audio: WAV 6. Relación señal-ruido del DAC: 98dB 7. Relación señal-ruido del ADC: 94dB 8. Controlador de auriculares: 40 mW (16 Ω a 3,3 V) 9. Controlador de altavoz: 1 W por canal (8 Ω BTL) Especificación: Peso del paquete Peso de un paquete 0,02 kg/0,04 lb Un tamaño de paquete 7 cm x 4 cm x 2 cm (2,76 pulgadas x 1,57 pulgadas x 0,79 pulgadas) Cantidad por caja 1600 Peso de la caja 15,00 kg/33,07 lb Tamaño de la caja 56 cm * 40 cm * 40 cm / 22,05 pulgadas * 15,75 pulgadas * 15,75 pulgadas Contenedor de carga 20GP: 297 cajas * 1600 piezas = 475200 piezas 40HQ: 690 cajas * 1600 piezas = 1104000 piezas
£12.99
-
Waveshare Waveshare XCore407I, STM32F4 Core Board
Overview1. XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.2. Clock circuit, USB power management3. Onboard devices: USB HS PHY, Ethernet PHY, 1G Bit NandFlash4. Connectors：USB HS (mini / type A), USB FS (mini), Ethernet (RJ45)5. All the idle I/O ports are accessible on the pin headers6. 2.0mm pin header pitch, smaller size, easier to integrate into user system7. Note : please consider the EVK407I, which supports easily programing/debugging.What is On BoardSTM32F407IGT6 development board on board resource1. STM32F407IGT6: The high performance STM32 MCU which features:- Core: Cortex-M4 32-bit RISC- Feature: a full set of single-cycle DSP instructions- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz- Operating Voltage: 1.8V-3.6V- Package: LQFP176- Memories: 1024kB Flash, 192+4kB SRAM- MCU communication Interfaces:-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C-- 1 x FSMC, 1 x SDIO, 2 x CAN-- 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY-- 1 x 10/100 Ethernet MAC-- 1 x 8 to 14-bit parallel camera interface- AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP2. MIC2075-2, onboard USB FS power management device3. AMS1117-3.3, 3.3V voltage regulator4. K9F1G08U0E, 1G Bit NandFlash5. DP83848, Ethernet PHY6. MIC2075-1, onboard USB HS power management device7. USB3300, USB HS PHY8. Power supply switch, powered from 5Vin or USB connection9. Boot mode switch, for configuring BOOT0 pin10. Power indicator11. USB FS LED12. USB HS LED13. Reset button14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication15. 24M crystal, USB3300 clock16. 50M crystal, DP83848 clock17. 32.768K crystal, for internal RTC with calibration18. Ethernet connector19. USB FS mini connector20. USB HS mini connector21. USB HS type A connector22. MCU pins expander, VCC, GND and all the idle I/O ports are accessible on expansion connectors for further expansion23. USB OTG/HOST jumper24. VREF/VBAT jumper25. Ethernet I/O selection solder joint26. USB HS I/O selection solder joint27. PDR selection solder joint: 1.8-3.6V, -40～105℃ OR 1.7-3.6V, 0～70℃Package Contents1. XCore407I development board x 12. USB type A to Mini-B cable x 13. Software CD x 1Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs
£41.99
-
WAVESHARE Waveshare ZED-F9P GPS-RTK HAT Centimeter Level Accuracy Multi-Band RTK Differential GPS Module for Raspberry Pi, ZED-F9P
FeaturesThis is a precise centimeter level Raspberry Pi GNSS HAT based on ZED-F9P. It provides features like multi-band RTK with fast convergence times, high update rate, moving base RTK mode support, concurrent reception of 4 GNSS systems, augment positioning systems support, accurate & fast positioning with minor drifting, and outstanding ability for anti-spoofing & anti-jamming. By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Multi-band RTK with fast convergence times, centimeter level accuracy, high update rate 3. Support Moving base RTK mode, enabling terminal precise navigation and centimeter level accuracy 4. Support concurrent receiving 4 GNSS constellations (GPS, BeiDou, Galileo and GLONASS), and still retains low power consumption 5. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location 6. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity 7. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing 8. Support U-Center, an easy way to config the module 9. Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 10. 4x LEDs for indicating the module operating status 11. Come with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specification1. ZED-F9P: Concurrent receiving, GPS 2. Frequency band: U-blox F9 platform, GPS L1C/A L2C, SBAS, QZSS, GLONASS L1OF L2OF, BeiDou B1I B2I, Galileo E1B/C E5b 3. Navigation update rate: - PVT: 20Hz - RTK: 25Hz - RAW: 25Hz 4. RTK convergence time: Less than 30s 5. Time-To-First-Fix: - Cold starts: 29s - Hot starts: 2s - Aided starts: 2s 6. Positioning accuracy: - PVT: 1.5m CEP - RTK (horizontal and vertical): 0.01m+1ppm CEP 7. Sensitivity: - Tracking and navigatingV-167 dBm - Re-acquisitionV-160 dBm - Cold starts: -148 dBm - Hot starts: -157 dBm 8. Velocity accuracy: 0.05 m/s 9. Heading accuracy 0.3 degree 10. PPS accuracy: - RMS: 30ns - 99%: 60ns - Jamming: +/-11ns 11. PPS frequency: 0.25Hz ~ 10MHz (configurable) 12. Operational limits: Acceleration (MAX): 4g 13. Altitude (MAX): 50000m 14. Velocity (MAX): 500m/s 15. Communication interface: USB, UART (4800~921600bps, 9600bps by default), I2C (MAX 400KHz), SPI (5MHz) 16. Protocol: NMEA 0183 Version 4.10, UBX, RTCM 3.3 17. Power supply: 5V 18. Overall current: Less than 120mA at 5V (continue mode) 19. Module current: 130mA at 3V (tracking status) 20. Operating temperature: -40 degree C ~ 85 degree C 21. Dimensions: 65mm x 30.5mmPackage List1. ZED-F9P GPS-RTK HAT x 1 2. Multi-band antenna x 1 3. USB-A to Micro-B cable x 1 4. Screws pack x 1 5. 2x20PIN female header x 1Specification: Package Weight One Package Weight 0.36kgs / 0.78lb One Package Size 20cm * 16cm * 5cm / 7.87inch * 6.3inch * 1.97inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 80 pcs = 40000 pcs40HQ: 1162 cartons * 80 pcs = 92960 pcs
£305.99
-
XH-M273 DC12-24V Microphone Amplifier Board K Song Singing Power Amplifier Board, Reverberation Board
1. Using PT2399 reverberation chip, with NE5532 op amp, it can mix human voice and music, which can realize independent adjustment of music volume, microphone volume and reverberation time to achieve K song effect2. It can be used for DC 12-24V power supply or AC 5-12V, which can be directly used for various digital power amplifier boards. If the power supply voltage is the same, the power supply can be shared3. Input voltage: DC12-24V4. Reverberation chip: PT239995. Microphone input: 26. Knob spacing: 24MM Microphone spacing: 17.6MM7. Output channel: 2 channels8. Frequency response range: 25HZ-17KHZ9. Appearance size: 117 x 53MM10. Weight: 75 grams11. Note: Only adjustable loop microphones can be used, other microphones such as condenser microphones, pole microphones, and headphone microphones are not available.Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 100 pcs = 62000 pcs40HQ: 1439 cartons * 100 pcs = 143900 pcs
£3.99
Has visto 264 de 265 productos