Résultats de la recherche pour "Monitor Arm"

1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.14. Rail-mounted ABS protective casing for easy installation and safer use.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading18. 34 multi-functional GPIO pins19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels20. 12 programmable I/O (PIO) state machines for custom peripheral supportProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power supply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Lis Plus Moins

1. The product is a high-performance, highly integrated microcontroller development board. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge and discharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Features the RP2350A microcontroller chip developed by Raspberry Pi3. Unique dual-core, dual-architecture design: equipped with dual-core ARM Cortex-M33 and dual-core Hazard3 RISC-V processors; clock speeds up to 150MHz; allows flexible switching between the two architectures4. Built-in 520KB SRAM and 16MB on-chip Flash5. Uses a USB Type-C interface—modern and convenient, eliminating the need to worry about plug orientation6. Onboard 1.54-inch E-Ink display (200 × 200 resolution) featuring high contrast and wide viewing angles7. Supports USB 1.1 Host and Device modes8. Supports low-power sleep and dormant modes9. Recognized as a mass storage device via USB for drag-and-drop file uploading10. Breaks out 7 GPIO pins and USB+/- pins from the RP2350A11. Includes 1x I2C, 1x UART, 2x 12-bit ADC, and 6x controllable PWM channels; features precise on-chip clocks and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 Programmable I/O (PIO) state machines for custom peripheral supportSpecifications:1. Display Panel: E-Ink screen2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs

Lis Plus Moins

1. Stall torque: 30kg.cm @ 12V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 6V ~ 12.6V6. Gear type: high-precision metal gears7. No-load speed: 0.222 sec / 60 degrees (45 RPM) @ 12V 0.192 sec /8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, Load, Speed, and12. Input voltage13. No-load current: 180mA14. Stall current: 2.7A15. Kt constant: 11kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build quadruped, hexapod, robotic arm, and other robot projects requiring multiple servos (this product provides the open-source structural model of the robot dog shown in the figure below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoder angle sensor. Compared to potentiometers, the angle is increased to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servo's lifespan.20. Acceleration start/stop function: speed and acceleration values ??can be set for smoother motion.21. The shell uses a higher-strength engineering plastic shell and a dual-axis low-profile shell structure design, optimizing the distance between the planes where the dual-axis servo discs are located, making the overall structure more compact and the product appearance more aesthetically pleasing.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs

Lis Plus Moins

1. Stall torque: 19.5 kg.cm @ 7.4V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 4V ~ 7.4V6. Gear type: high-precision metal gears7. No-load speed: 0.192 sec / 60 degrees (52 RPM) @ 7.4V8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, load, speed, and12. Input voltage13. No-load current: 150mA14. Stall current: 2.5A15. Kt constant: 7.8 kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build robotic projects requiring multiple servos, such as quadruped robots, hexapod robots, and robotic arms (this product provides the open-source structural model of the robot dog shown in the image below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoding angle sensor. Compared to potentiometers, the angle range is extended to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servos lifespan.20. Acceleration start/stop function: allows setting speed and acceleration values ??for smoother motion.21. The casing uses a higher-strength engineering plastic shell and a dual-axis low-profile structure design, optimizing the spacing between the planes where the dual-axis servo horns are located, resulting in a more compact overall structure and a more aesthetically pleasing appearance.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs

Lis Plus Moins

OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B. It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, you're almost there, our open source demo codes is ready to help you get started fast.Raspberry Pi 3 Features1. BCM2837, 1.2GHz 64-bit quad-core ARM Cortex-A532. 1GB RAM3. 10/100 Ethernet port4. 802.11n WiFi NIC5. Bluetooth 4.1 & Bluetooth Low Energy (BLE)6. HDMI port7. USB 2.0 interface x 48. Micro SD card slot9. Combined 3.5mm audio jack and composite video10. 40-pin GPIO interface11. Camera interface (CSI)12. Display interface (DSI)13. Upgraded power management, supports more peripherals (requires a 2.5A power supply or above)AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating4. N20 micro gear motor, with metal gears, low noise, high accuracy5. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTPackage Contents1. AlphaBot2-Pi (adapter board) x12. AlphaBot2-Base (base chassis) x13. RPi Camera (B) x14. Micro SD Card 16GB x15. Power adapter US standard 5V/3A micro x16. SG90 servo x25. 2 DOF pan and tilt kit x17. IR remote controller x18. FC-20P cable 8cm x19. USB type A plug to micro B plug cable x110. 15PIN FFC 25cm x111. AlphaBot2-Pi screws x112. Micro SD Card Reader x1 (Extra Free)13. Screwdriver x1 (Extra Free)Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 15cm * 11cm * 8cm / 5.91inch * 4.33inch * 3.15inch Qty per Carton 60 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 33cm * 40cm / 23.62inch * 12.99inch * 15.75inch Loading Container 20GP: 336 cartons * 60 pcs = 20160 pcs40HQ: 781 cartons * 60 pcs = 46860 pcs

Lis Plus Moins

AMOLED screen specifications1. Display panel: AMOLED2. Display size: 1.75 inches3. Display resolution: 466 x 466 pixels4. Display colors: 65K5. Display brightness: 700 cd/㎡6. Contrast ratio: 100000:17. Communication interface: QSPI8. Driver IC: CO53009. Touch: supported10. Touch IC: CST9217Product features1. Unique dual-core, dual-architecture design, featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.2. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM pad.3. Onboard 1.75-inch capacitive touch HD AMOLED screen. 1. Screen: 466 × 466 resolution, 65K color, capable of clearly displaying color images.2. Built-in CO5300 driver chip and CST9217 capacitive touch chip, using QSPI and I2C interfaces respectively for communication, minimizing interface pin usage.3. Onboard 3.7V MX1.25 lithium battery charging/discharging interface, beneficial for mobile applications.4. USB 1.1 master and slave device support.5. Supports low-power sleep and hibernation modes.6. Can be recognized as a mass storage device via USB for drag-and-drop program download.7. Five multi-functional GPIO pins.8. One SPI, two I2C, two UART, four 12-bit ADCs, and five controllable PWM channels.9. Precise on-chip clock and timers.10. Built-in temperature sensor for real-time chip temperature monitoring.11. Twelve programmable I/O (PIO) ports. 14. State machine for custom peripheral support.15. Employs AXP2101 for efficient power management, supports multiple voltage outputs, integrates charging and battery management functions, and optimizes battery life.16. Uses an AMOLED screen with higher contrast, wider viewing angles, richer colors, and faster response time, resulting in superior visual effects while offering advantages such as slim design, low power consumption, and flexibility.17. Compact panel for more touch possibilities, suitable for various smart device development, enabling human-computer interaction functions, and can operate independently with a battery.18. Onboard audio codec chip supports high-quality audio processing, providing clear and excellent audio input and output.Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 12.70kgs / 28.00lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs

Lis Plus Moins

Features:1. Real-time positioning: query position information and adjust positioning interval, and navigate to find personnel.2. Historical track: View the movement track of any day within 90 days3. Fence:GPS fence: Compare the GPS positioning data and judge whether there is an alarm for entering or leaving the fence.WIFI fence: Compare the WIFI hotspots and judge whether there is an alarm in or out of the fence.4. Health:Calculate the amount of exercise, calorie consumption and exercise journey of people.Medicine reminder: Three different modes of medicine reminder settings: single; daily and customized; and you can record the voice of the reminder, etc.5. Call:Dial the locator phone: two-way talk.Voice monitoring: ask the locator to call back the specified number and listen to the sounds around the wearer6. Command setting: make relevant settings for the positioner, for example:The master number is used to receive alarm informationSOS SOS phone alarmFall Detection Sensitivity and Fall Alarm SettingsCall Answering Modes: Mute, Auto and Key AnswerBuzzer Sound Lookup: The locator will make a sound. It is convenient to find the target more quickly.SMS alarm switchRemote restart, shutdown or factory reset, etc.7. Message list: Displays all alarm lists of the locator, including offline, low battery and entry and exit of the electronic fence, etc.8. Reminder settings: Open all to receive an alarm push. Please be sure to enable the relevant push permissions in the app permissions of your phoneGPS:GPS:1. Chip model: TD10302. GPS signal: L1, 1575.42MHz C/A code3. Number of GPS channels: 72 channels4. GPS chip receiving sensitivity: -163dBm, capture: -147dBm5. GPS positioning accuracy: 5-15m6. GPS Antenna: LDS/Ceramic Antenna7. AGPS: Support8. AGPS fast positioning time: 28 seconds for cold start9. LBS positioning accuracy: 100-1000M (based on AMAP database)10. WIFI: only support RXWiFi chip model: built-inWiFi standard: 802.11b\802.11g\802.11nWiFi positioning accuracy: 5-50M (according to AutoNavi or Google data)parameter:1. Battery capacity: 1000mAh2. Average standby current: 5mA/h3. Average operating current: 8mA/h (positioning once every ten minutes)4. Operating temperature: -20 to 70 degrees Celsius5. Working humidity: 5% to 95% non-solidifying6. Waterproof grade: IP677. Memory capacity (RAM+ROM): RAM 128Mb+ built-in ROM 196Mb8. Chip platform: RTOS ASR3603S9. Main frequency: 832MHz10. Architecture: Single-core ARM Cortex-R5 processor11. Number of cores: single core12. Supported formats: GSM\WCDMA\FDD-LTE13. Frequency bands:FDD: B1 B2 B3 B5 B7 B8 B20 B28AWCDMA: B1\2\5\8GSM: Band B2\3\5\814. Standby mode: single card NANOSpecification: General Certificate CE Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 100 Carton Weight 11.50kgs / 25.35lb Carton Size 32cm * 32cm * 28cm / 12.6inch * 12.6inch * 11.02inch Loading Container 20GP: 930 cartons * 100 pcs = 93000 pcs40HQ: 2159 cartons * 100 pcs = 215900 pcs

Lis Plus Moins

Note: You need to turn off the anti-virus software (including the one that comes with the system) before installation. If you mind, please do not purchase. 1. This product supports Jaguar and Land Rover vehicles manufactured before 2014, Toyota vehicles manufactured before 2014 and Volvo vehicles manufactured before 2013. A vehicle communication tool used in conjunction with VIDA, communication enables diagnostics and troubleshooting as well as downloading software. 2. Versions after JLR V137 do not support offline programming, but can be programmed online 3. Support multiple languages: English, German, Russian, French, Dutch, Portuguese, Japanese, Spanish, Italian, Simplified Chinese 4. Software version: JLR SDD V143JLR SDD V143JLR SDD V143JLR: V143 5. Supported vehicles: 2005-2014 Land Rover / Jaguar 1996-2014 Toyota 1996-2013 Volvo Features: 1. Data list 2. Active testing 3. Monitoring 4. Practical testing 5. Reprogramming 6. Diagnostic trouble codes 7. DICE - Diagnostic Communication Equipment, is a tool used with VIDA all-in-one to communicate with the vehicle. Communications enable vehicle diagnostics and troubleshooting as well as software downloads. 8. DICE has an integrated CARB cable that connects to the vehicles diagnostic socket. When connected to a vehicle, DICE will provide power as long as the battery is charged. 9. The DICE has a folding hook designed to hang the unit on one of the handlebars of the vehicle. 10. DICE is equipped with four status LEDs that indicate the status of the software, USB and Bluetooth communication, and the interface with the car. 11. On one end of the unit, there is a DC input to which a battery cable or adapter can be connected. This adapter is used for upgrades and troubleshooting of DICE. 12. On the other end of the unit, there is a removable cover that can be removed by turning a screw on the cover. 13. High performance, built-in ARM CPU 14. The product adopts SMD chip with high reliability Specifications: 1. Manage general information, design and functionality 2. Standard Parts, Service Materials, and Consumables. General information (control modules, SRS, general safety, among other things) 3. Service and maintenance 4. Engine and its installation and equipment 5. Electrical system 6. Power transmission 7. Brake 8. Suspension and Steering 9. Springs, shock absorbers and wheels 10. Body and interior ?￠???? inter alia, diagnostics, design and function, repair and spare parts information 11. Other special vehicles, such as ambulances, police cars, components that deviate from the standard 12. J2534 and J2534-1 compatible device drivers 13. Commercial range (0 to 70 degree Celsius) 14. Working voltage: USB bus power supply 15. Host interface: full speed 12 mbps USB2.0 with J2534 device driver 16. Compatible computer systems: Windows 7/XPSpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 15cm * 14cm * 3cm / 5.91inch * 5.51inch * 1.18inch Qty per Carton 100 Carton Weight 24.40kgs / 53.79lb Carton Size 42cm * 36cm * 32cm / 16.54inch * 14.17inch * 12.6inch Loading Container 20GP: 551 cartons * 100 pcs = 55100 pcs40HQ: 1279 cartons * 100 pcs = 127900 pcs

Lis Plus Moins

Features1. Interface fitting for 14 pin consult port of Nissan vehicles. 2. Heavy & robust casing for rough service use 3. Connects to PC via RS232 4. Powered from car battery over 14 pin consult port of Nissan vehicles. 5. LED to control power and clock functionFunctions1. Monitor and Log dozens of real time parameters 2. Check and clear engine fault codes, before going to an expensive auto shop 3. Adjust the timing and idle 4 .Power balance testing 5. Reset the self-learn codes 6. Control idle air valves, relays (AC, fans, etc), timing 7. Diagnose customer vehicles on-site 8. Speed up troubleshooting of electronically monitored components 9. No software is supplied with this deviceSpecification: General Compatible with Nissan: Paladin, Skyline R34, NV400, N200, NV350, March, Interstar, Interstar X70, Kicks, Patrol, Navara, Qashqai, Tiida, Teana, X-Trail, Cabstar, Titan XD, Versa Note, Rogue Select, NV200, NV3500, NV2500, NV1500, Leaf, Juke, GT-R, Cube, 370Z(Z34), Rogue, Versa, Armada, Titan, Pathfinder Armada, Murano, 350Z, Xterra, Altra EV, Frontier, Pickup, 200SX, Quest, Altima, NX, Stanza, Sentra, Pulsar NX, Pathfinder, Maxima, D21, Axxess, 300ZX, 240SX, Bluebird, Geniss, Sunny, Teana XV, Sylphy, Livina, Tiida Latio Types Diagnostic tool Languages Chinese, English Material Electronic Component, ABS Voltage DC 12V Adaptable Automobile All Nissan cars that have the grey 14pin consult connector (it near the fusebox). This cars are usually build from year 1989 to 2000, models such as: 300ZX, Z32, Maxima, 240SX, S13, S14, Skyline, SR20DE, SR20DET, RB20, Altima, Fairlady Software DDLreader: DDLreader v.15c / DDLreader v.16c; ConZult / Scan Tech Nissan / Z-Control / SRTalk v.1.0 / ZCSetup v.2.0 / ZTalk v.1.1 / Nissan Data Scan v.1.4 / Nissan Data Scan v.1.51(Note that some of it is not free and need to be purchased) Package Include Package Contents 1 x CD Disk 1 x USB cable 1 x Com interface Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 10cm * 9cm * 3cm / 3.94inch * 3.54inch * 1.18inch Qty per Carton 60 Carton Weight 7.50kgs / 16.53lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 60 pcs = 37200 pcs40HQ: 1439 cartons * 60 pcs = 86340 pcs

Lis Plus Moins

🔥 Share your screen wirelessly without running another video cable.This M2 EZCast HDMI wireless display dongle is designed to mirror or share compatible Android, iOS, macOS and Windows device content to an HDMI display over Wi-Fi.😩 THE PROBLEMRunning cables between a phone, laptop or tablet and a TV or projector can be inconvenient.💡 THE SOLUTIONConnect the dongle to an HDMI display and use a compatible device to wirelessly share supported content.🚀 BENEFITS ✔ HDMI wireless display receiver ✔ Supports compatible Android and iOS devices ✔ Compatible with Windows and macOS as listed ✔ Supports AirPlay/DLNA functions as compatible ✔ Up to 1080P display support as listed ✔ Useful for TVs, monitors and projectors ⚡ HOW IT SOLVES THE PROBLEMIt provides a wireless bridge between compatible smart devices and an HDMI display, reducing the need for a direct video cable.⚠️ CHECK COMPATIBILITYWireless mirroring features depend on the device, operating system, app and network environment.💬 Send us your phone, tablet or computer model if you're unsure.

Lis Plus Moins

1. Designed For Sony FX30 / FX3: The cage adopts modular design, including a top slider module and a U-shaped cage module. The top slider module is fixed by two 1/4 inch-20 screws, and can be compatible with the original XLR after disassembly; The U-shaped cage module is fixed by 1/4 inch-20 screws on both sides and the bottom, which is stable and does not deflect. 2. Multiple Mounting Points: The cage includes 1/4 inch-20 holes to attach magic arm; the locating hole for ARRI can attach top handle for monitor mount; the side NATO rail can attach side handle; The 1/4 inch-20 positioning holes on the upper left corner and left side can attach rod clamp for follow focus; Two 1/4 inch-20 holes on the side can attach quick release plate to prevent deflection when shooting vertically; built-in cold shoe can attach microphones, LED video lights; 3. Holes for shoulder straps and wrist straps are reserved on both sides and bottom to attach wrist strap, shoulder strap. The bottom QD interface is compatible with QD shoulder straps. The built-in magnetic suction wrench at the bottom is convenient for disassembly and assembly. 4. Ergonomic design: The position of the battery compartment is designed with an opening and closing wrench, which fits the curve of the fuselage better, solves the problem of placing the little finger and improves the grip feeling. There are built-in protective gaskets on the contact surface with the camera body to prevent the camera from being scratched. 5. It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked.Specification: Package Weight One Package Weight 0.31kgs / 0.68lb One Package Size 17cm * 12cm * 7cm / 6.69inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 13.60kgs / 29.98lb Carton Size 50cm * 37cm * 37cm / 19.69inch * 14.57inch * 14.57inch Loading Container 20GP: 389 cartons * 50 pcs = 19450 pcs40HQ: 904 cartons * 50 pcs = 45200 pcs

Lis Plus Moins