Résultats de la recherche pour "Cover Monitor Stand"

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lis Plus Moins

Specifications1. Shell material: ABS 2. 2.4G solution: JieLi AD6976M4 3. Working system: GFSK 4. Working frequency: 2.4G-2.4835GHz 5. Radio sensitivity: -38db 6. Effective distance: greater than or equal to 10 meters 7. Transmitter shutdown power consumption: 2uA 8. Transmitter operating power consumption: (video mode) 25mA 9. Transmitter operating power consumption: (Bluetooth mode) 30-40mA 10. Receiver operating power consumption: 14mA 11. Microphone signal-to-noise ratio: greater than or equal to 65db 12. Frequency response: 20Hz-20KHz 13. Monitoring: One-way monitoring 14. Microphone: Electret 15. Battery: 300mAh 16. Talk time: greater than or equal to 10 hours 17. Standby time (off state): 6 months 18. Charging input standard: DC-5V/ Max 200+/-10mA 19. Charging time: 1.5-2 hoursFeatures1. Support Bluetooth mode and video mode 2. Support dodge function 3. Support reverb function 4. Automatic pairing 5. Support monitoring 6. Suitable for mobile phones, computers, sound cards, mixers, effectors...Package List1. Receiver x 1 2. Microphone transmitter x 2 3. TRS 3.5mm to TRS 3.5mm audio cable x 1 4. OTG cable x 2 5. Type-C charging cable x 3 6. Monitoring headphones x 2 7. Rabbit fur windproof cover x 2 8. Storage bag x 1 9. Instruction manual x 1 10. Packing box x 1Specification: General Certificate MSDS, ROHS, EMC, RED Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 17cm * 8cm * 5cm / 6.69inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 22.30kgs / 49.16lb Carton Size 43cm * 34cm * 45cm / 16.93inch * 13.39inch * 17.72inch Loading Container 20GP: 405 cartons * 100 pcs = 40500 pcs40HQ: 940 cartons * 100 pcs = 94000 pcs

Lis Plus Moins

Wireless HDMI Transmitter and Receiver Kit, Plug and Play, HDMI Wireless Extender Adapter, 1080P 60fps Video Audio Projecting for PC, Laptop, Camera to HDTV/Projector 1 .Long Distance Wireless HDMI Transmission: Acsurpo wireless hdmi transmitter and receiver built-in 2.4G + 5GHz high speed WiFi, which makes the 1080P audio and video wireless transmission distance up to 165ft(50m) in open space and no long cable installation trouble. It is more convenient and aesthetically pleasing than the normal wired HDMI cable which usually only can transmit up to 50ft(15m) and is heavy. 2. Plug & Play, Easy to Use: No need any additional software or app, no need parameters setting, no need additional USB or HDMI cable. Only need to plug in the USB and HDMI port, this wireless HDMI transmitter and receiver will automatically connect and transmit the video in a few seconds. It is ideal solution for wireless HDMI extender or HDMI adapter. 3. Compact and Portable Design: Using high integrated video codec chip and built-in WiFi antenna, the video process, power supply and wireless data transmitting system are integrated in a small and light USB-HDMI cable, you dont need additional HDMI or USB cable. That will significantly saves your space and avoiding the cable mess. 4. High Quality Video: support 1080P@30-60fps high definition, built-in auto transmission balance technology provides low-latency and high-quality audio and video streaming. Support computer screen extend and duplicate mode. 5 .Wide Usage: it compatible with HDMI 1.3/1.4 standard, you can use this device to connects a variety of HDMI video source devices such as laptop, desktop computer, digital video recorder, DVD player, high definition camera, game host and the display device including TV, monitor, projector, etc. For example, you can wirelessly project your movie on computer to your big screen TV at home or wirlessly show your presentation on projector in your company meeting room. 6 . Notes: 1.The surface and HDMI connector of the transmitter and receiver will be hot during it is working, this is normal. Please dont use other things to cover it. 2. 165ft/50meters is the maximal transmission distance in open experimental space without any obstructions and signal interference, the practical transmission distance in your environment may be lower than this test value. 3. Most of computers and high definition televisions usually provide USB port, you can use it as the power supply for this wireless HDMI transmitter or receiver. If your device doesnt support USB power supply, please use a external USB power adapter providing 5V/1A.Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 6.00kgs / 13.23lb Carton Size 40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch Loading Container 20GP: 740 cartons * 100 pcs = 74000 pcs40HQ: 1719 cartons * 100 pcs = 171900 pcs

Lis Plus Moins

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lis Plus Moins

1. High-performance chip: High-performance image processing chip is adopted to ensure high frame rate while providing high-quality images, realizing high-definition smoothness. 2. Reversing rear view: When reversing, when the app is already open, the reversing video will automatically display to realize reversing rear view (this function is limited to Android devices). 3. Electronic rearview mirror: During driving, tap the mobile app to enter the rearview video interface, and you can watch the rearview video in real time. 4. Front view and side view: It can be installed in the front, rear, left and right blind areas of the vehicle to monitor these blind areas in real time. 5. A new transmission method: smart devices and cameras are connected via wifi to realize true high-definition reversing image display, avoiding cumbersome body wiring. It is widely used in transportation equipment such as automobiles, buses, commercial vehicles, trucks, and construction vehicles. 6. Free data traffic: After the camera is powered on, a wifi hotspot is automatically built, and the mobile phone does not need Internet traffic to realize high-definition video transmission. After restarting, it will automatically connect with the phone, which is easy to use. 7. Take a picture: The image can be taken, saved, and played back in the app on the smart device. 8. Driving video: The app on the smart device side can record and save images, realize functions such as video recording and video sharing, and save important video data for backup. 9. Video playback: The app on the smart device side can play back the video files stored in memory of smart the device to reproduce the shot scene. 10. No light night vision: The scene behind the car can be seen clearly even in a dark environment, making driving and reversing at night safer. 11. Large wide-angle lens: A large wide-angle lens is used to cover the panoramic view behind the car. 12. Waterproof: IP67 waterproof standard. 13. Parameters: Power (max): 2W Transmission: 2.4G Wifi signal Video: H.264 Frame rate: 20-30fps Support device: iOS/Android Sensor: CMOS Image pixels: 720p Viewing angle 175 degrees Minimum illumination: F0.1 Power supply: DC12V???DC24V Working current: 50-80mH Night vision distance: 8-10 meters Waterproof rating: IP67 Fixing method: fixed position of license plate light Transmission distance: 10-20M Working temperature: -20???+85 degrees Celsius Storage temperature: -0???+125 degrees CelsiusSpecification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 15cm * 9cm * 9cm / 5.91inch * 3.54inch * 3.54inch Qty per Carton 60 Carton Weight 8.40kgs / 18.52lb Carton Size 48cm * 42cm * 42cm / 18.9inch * 16.54inch * 16.54inch Loading Container 20GP: 314 cartons * 60 pcs = 18840 pcs40HQ: 731 cartons * 60 pcs = 43860 pcs

Lis Plus Moins

About The Product1. This Radar detector features a laser eye detector for a 360 degree laser detection and easy to install. 2. This Radar can Detect any stable or mobile Radia Speed Monitor 250-2500m ahead. 3. Extreme Range Super heterodyne technology, with super-fast sweep circuitry, provides extra detection range and the best possible advance warning to even the fastest radar guns. 4. Detects Ku Band radar gun currently being used in Europe.Detects the latest pop mode radar gun (super-fast instant on mode) 5. Relative speed sensing auto mute system that virtually eliminates false alerts.Provides complete immunity to VG-2 radar detector-detectors. 6. Relative speed sensing auto shutdown feature will render your detector undetectable by currently available radar detector-detectors. 7. Electronically remembers radar detector setting for an indefinite period of time even with the power remove.Notices1. Please install the detector properly following the user manual. A rule must be complied with is in whatever way the detector installed, it must not impair the motorist view or increase the risk of an accident. 2. Depending on your car, the power supply of the cigarette lighter socket would be continuous or can be switched on/off by your ignition switch. So before you leaving the car, confirm the status of the detector. Do not leave the detector alone to be longtime running, this may lead to complete consumption of car battery or shorten the life of the detector. 3. Before leaving your car, always remember to conceal your detector in a safe place. To avoid the possibility of break? In theft or distortion of shape due to the heat of longtime exposure in the sun(sometime the temperature in car would be a hundred Celsius or above in Summer) 4 Do not disconnect the detector from PC in the whole process of updating. Or this may result in the instability of system. 5. Use standard 12V DC power supply to the detector. Nothing should cover or overlie the detector while in use.Specifications1. Material: ABS 2. Laser beam: 90-433KMHz 3. VG-2: 11.150GHz-410MHz 4. Wireless duplex transmission frequency: 2.4GHz-410MHz 5. Language:Russian + English 6. Voltage: DC 12V 7. Current: 150 - 300MA 8. Power: 60 watts 9. Product size: 97x60x31mm 10. Package Include: - V7 Radar detector x 1 - Car Charger x 1 - Non Slip Mat x 1 - User Manual x 1Bands1. X-BAND: 10.525GHz100MHz, detectable distance: 1500-2500m 2. K-BAND: 24.150GHz175MHz, detectable distance: 1200-2500m 3. Trfor iPod K-BAND: 24.150GHz175MHz, detectable distance: 250-1200m 4. KU-BAND: 13.450GHz125MHz, detectable distance: 450-1500m 5. KA-BAND: 34.700GHz1300MHz, detectable distance: 800-1500m 6. Trfor iPod KA-BAND: 33.400GHz1300MHz, detectable distance: 200-600mSpecification: Package Weight One Package Weight 0.16kgs / 0.34lb One Package Size 12cm * 7.5cm * 6.5cm / 4.72inch * 2.95inch * 2.56inch Qty per Carton 40 Carton Weight 17.80kgs / 39.24lb Carton Size 50cm * 41cm * 36cm / 19.69inch * 16.14inch * 14.17inch Loading Container 20GP: 361 cartons * 40 pcs = 14440 pcs40HQ: 838 cartons * 40 pcs = 33520 pcs

Lis Plus Moins