Résultats de la recherche pour "wifi extender"

Features1. 100% brand new and high quality 2. Connector: SMA female (outside screw & female pin inside) 4 hole Chassis panel mount extended dielectric solder connector 3. Nickel-plated machined brass construction 4. Gold-plated contacts - teflon insulator 5. Impedance: 50 ohm 6. You may need other connectors: All of SMA connectorsSpecification: General Material Metal Input Impedance 50 ohms Connector Types SMA Female Size 2.4*1.3*1.3cm Weight 3g Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 4cm * 4cm * 1cm / 1.57inch * 1.57inch * 0.39inch Qty per Carton 300 Carton Weight 7.80kgs / 17.20lb Carton Size 48cm * 32cm * 34cm / 18.9inch * 12.6inch * 13.39inch Loading Container 20GP: 510 cartons * 300 pcs = 153000 pcs40HQ: 1185 cartons * 300 pcs = 355500 pcs

Lis Plus Moins

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs

Lis Plus Moins

1.AX3000 WiFi 6 Speed：Outdoor WiFi 6 extender, compliant with IEEE 802.11 ac/a/b/g/n standards. Supports dual-band maximum speed up to 5GHz 2402Mbps and 2.4GHz 573Mbps, avoids wireless interference and congestion, and provides lightning-fast Internet speed. Also supports Everything Mesh technology, one-click to bring more device connections, greatly expand WiFi coverage, up to 256 devices2.Built-in 12dBi Directional Antenna：4 directional built-in 12dBi antennas (2 x 12dBi 2.4GHz antenna; 2 x 12dBi 5GHz antenna) to achieve 300 meters of stable directional wireless coverage. It can significantly improve the transmission and reception performance of wireless signals. Note: Over 3 km/1.9 miles (only for paired PtP or PtMP transmission) has been tested in an accessible field. Please avoid obstacles between the POE device and the target area, otherwise the performance will be greatly limited3.Optional PoE power supply：Support 802.3AF/AT active PoE and passive PoE, transmit data and charge the product with one Ethernet cable, so you can install the product in places without power outlets, giving you more choices of installation locations. Note: The PoE converter is not waterproof. Please use CAT5E or above cable, the length should not exceed 100 meters/328 feet4.Support Mesh/AP/Router/Repeater/AP+Repeater and other modes：The best outdoor WIFI extender meets your different needs and is suitable for more outdoor connection scenarios. Router/AP mode is perfect for converting wired connections to wireless networks, while in mesh mode, you can enjoy seamless WiFi with a single network name and password. Note: Setting to Mesh mode will prevent you from observing signal strength in the signal management interface5.Extended Outdoor Reliability：This WiFi router is ideal for outdoor use in garages, yards, and RVsSpecification: Package Weight One Package Weight 2.24kgs / 4.95lb One Package Size 45cm * 33cm * 8.8cm / 17.72inch * 12.99inch * 3.46inch Qty per Carton 5 Carton Weight 12.00kgs / 26.46lb Carton Size 46cm * 46cm * 35cm / 18.11inch * 18.11inch * 13.78inch Loading Container 20GP: 360 cartons * 5 pcs = 1800 pcs40HQ: 835 cartons * 5 pcs = 4175 pcs

Lis Plus Moins

Features1. Suitable for GoPro, Xiaoyi and Other Action Cameras (camera is not included). 2. Adjustable and compact design chest belt strap mount and head strap mount, made of superior plastic and nylon, specially designed for GoPro. 3. It is ideal requires for a great deal of sport activities. 4. Screws for fixing action cameras to a bobber hand grip or J-Hook buckle. 5. The adhesive mount is perfect for attaching the camera to a curved surface like a snowboarding, skydiving or skateboarding helmet. 6. Portable box is good shaped compartments for a action camera, outer housing, and accessories. 7. Extendable monopod is ideal for taking photos by yourself.Package List1. Large Size Case x 1 2. Helmet Curved Arm x 1 3. Screw Wrench x 1 4. Backpack Quick Release Clip x 1 5. Widened Wrist Strap x 1 6. Octopus Tripod + Clip x 1 7. Head Strap x 1 8. Chest Strap x 1 9. Hand Wrist Strap for WiFi Remote x 1 10. Handlebar Mount + Pivot Arms x 1 11. Helmet Strap x 1 12. Quick Release Buckle x 2 13. J-Hook Buckle x 2 14. Flat Surface Mount x 2 15. Round Base Adhesive Sticker x 3 16. Curved Surface Mount x 2 17. Square Base Adhesive Sticker x 3 18. Safety Tethers Strap with Adhesive Sticker x 1 19. Anti-Fog Inserts x 12 20. Bobber Hand Grip x 1 21. Adapter x 1 22. Storage Bag x 1 23. Selfie Stick Monopod x 1 24. Long Screw x 1 25. Short Screw x 1 26. Suction Cup Holder x 1Specification: General Compatible with DJI: Osmo Action 5 Pro, Osmo Action 4, Osmo Action 3, Osmo Action Gopro: HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Insta360: Ace Pro 2, Ace, Ace Pro, ONE R Package Weight One Package Weight 1.27kgs / 2.80lb One Package Size 32cm * 21cm * 7.5cm / 12.6inch * 8.27inch * 2.95inch Qty per Carton 10 Carton Weight 12.62kgs / 27.82lb Carton Size 50cm * 36cm * 45cm / 19.69inch * 14.17inch * 17.72inch Loading Container 20GP: 329 cartons * 10 pcs = 3290 pcs40HQ: 764 cartons * 10 pcs = 7640 pcs

Lis Plus Moins

Features1. Suitable for GoPro / Dazzne / SOOCOO camera (camera is not included) 2. Adjustable and compact design chest belt strap mount and head strap mount, made of superior plastic and nylon, specially designed for GoPro. 3. Extendable monopod is ideal for taking photos by yourself 4. Screws for fixing cameras to a bobber hand grip or J-Hook buckle 5. The adhesive mount is perfect for attaching the camera to a curved surface like a snowboarding, skydiving or skateboarding helmet 6. Float designed to keep your camera with a waterproof shell, dive Housing and other parts of the case, easy to float in the water 7. Floaty sponge is great for snorkeling, scuba diving, surfing, wakeboarding and any other deep water activity 8. Storage Bag is good shaped compartments for a camera, outer housing, and accessoriesPackage List1. Long screw x 2pcs + short screw x 2pcs 2. Handlebar Mount with screw 3. Suction Cup Mount with adapter & screw 4. Chest Strap 5. Wrist Strap mount 6. Wrist Strap for Wifi remote 7. 3-Way Pivot Arms with screws x 2pcs 8. J-Hook Buckles x 2pcs 9. Quick Release Buckles x 2pcs 10. Extendable Monopod with adapter 11. 360 degrees backpack quick release clip 12. Helmet Strap 13. Curved surface mounts x 2pcs + flat surface mounts x 2pcs + adhesive mount stickers x 4pcs 14. Adhesive mount stickers x 6pcs 15. Safety Tethers Strap with Sticker 16. Storage bag 17. Tripod Adapter x 2pcs 18. Bobber Hand Grip + Strap + screw 19. Plastic Wrench with strap 20. Anti-Fog Inserts x 2pcs 21. Head Strap 22. Floaty Sponge with StickerSpecification: General Compatible with DJI: Osmo Action 5 Pro, Osmo Action 4, Osmo Action 3, Osmo Action Gopro: HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Insta360: Ace Pro 2, Ace, Ace Pro, ONE R Material ABS, Metal, Nylon Package Weight One Package Weight 0.81kgs / 1.79lb One Package Size 22cm * 18cm * 8cm / 8.66inch * 7.09inch * 3.15inch Qty per Carton 20 Carton Weight 17.05kgs / 37.59lb Carton Size 48cm * 39cm * 46cm / 18.9inch * 15.35inch * 18.11inch Loading Container 20GP: 309 cartons * 20 pcs = 6180 pcs40HQ: 718 cartons * 20 pcs = 14360 pcs

Lis Plus Moins

1. Detects three types of radiofrequency radiation (RF): WIFI/PHONE (WIFI radiation), MICROWAVE (microwave radiation), MIXED (mixed electromagnetic radiation)2. Detects three types of non-ionizing radiation: Electric Field (EF), Magnetic Field (MF), Radio Frequency (RF)3. USB rechargeable with built-in high-capacity lithium battery for extended runtime4. Three-color backlight and bar graph alerts provide additional visual assessment of radiation intensity alongside numerical readings5. Auto-shutdown after 15 minutes of inactivity6. Versatile applications: suitable for TVs, computers, home appliances, substations, mobile phones, base stations, etcSpecifications1. Measurement accuracy: ±5%2. Measurement bandwidth: 40Hz-10GHz3. Auto-off: default 15 minutes, can be disabled4. Operating temperature/humidity: temperature: -10 to +60°C; humidity: less than 80% RH5. Battery capacity: 320mAh6. Charging: 5V 500mA7. Charging port: Type-C8. Size: about 14.4 x 6.7 x 2.7cm9. Weight: about 140gSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 18cm * 10cm * 6cm / 7.09inch * 3.94inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 40 pcs = 20880 pcs40HQ: 1212 cartons * 40 pcs = 48480 pcs

Lis Plus Moins

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module provides more flexible power supply options for the development board.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve both networking and power supply.13. Dimensions: 55x68mmRaspberry Pi camera module B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focusPackage contents:ESP32-P4-WIFI6-POE-ETH x 1SH1.0 4PIN connecting cable (approx. 150mm) x 21217 cavity speaker 8Ω 2W x 12.4G antenna x 1RPi camera (B) x 1FFC 15PIN ribbon cable x 1Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs

Lis Plus Moins

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, providing stable connection and efficient transmission.11. Integrated PoE module makes the development boards power supply more flexible.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve networking and power supply.13. Uses an IPS full-laminated tempered glass panel with a 178-degree wide viewing angle, supports ten-point touch, and provides a clear picture and excellent visual experience.14. Dimensions: 55x68mmRaspberry Pi camera type B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focus1. Screen model: 10.1-DSI-TOUCH-A2. Resolution: 800 x 1280 (H x V)3. Communication interface: MIPI-DSI (2-lane)4. Brightness: 400cd/m25. Touch chip: GT92716. Dimensions: 147.0 × 239.0 (mm)7. Display size: 135.36 × 216.58 (mm)8. Pixel size: 0.1692 (H) × 0.1692 (V) (mm)9. Contrast ratio: 800:1Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- 10.1-inch display x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- RPi camera (B) x 1- FFC cable - 15-pin ribbon cable x 1- MIPI-DSI cable 12cm x 1- MX 1.25 2-pin to 2.54 3-pin connector cable x 1- FFC cable 22-pin 200mm (reverse direction) x 2- MX1.25 2-pin to MX1.25 4-pin cable approximately 150mm x 1- MX1.25 2-pin to SH1.0 2-pin connector cable approximately 80mm x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable approximately 1 meter x 1- Copper standoffs pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 23cm * 16cm * 7cm / 9.06inch * 6.3inch * 2.76inch Qty per Carton 16 Carton Weight 9.10kgs / 20.06lb Carton Size 48cm * 34cm * 30cm / 18.9inch * 13.39inch * 11.81inch Loading Container 20GP: 544 cartons * 16 pcs = 8704 pcs40HQ: 1264 cartons * 16 pcs = 20224 pcs

Lis Plus Moins

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module, making the development boards power supply more flexible.12. Only one network cable is needed to connect to a PoE device, enabling both networking and power supply for the ESP32-P4-WIFI6-POE-ETH.13. Dimensions: 55x68mm14. Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs

Lis Plus Moins

1. Operating system: Windows 11 2. CPU: Intel Core i5-10210Y Quad Core 8 Thread 1.0GHz-4.0GHz 3. GPU: Intel UHD Graphics 4. Screen: 10.1 inch IPS, 1920x1200 resolution, 10-point touch G+G screen, hardness more than 7H, support glove touch screen 5. Memory: 8GB RAM + 128GB ROM 6. Extended storage: External TF card up to 256GB (not included) 7. Camera: front 5.0MP fixed focus, rear 12MP auto focus 8. Audio: 2 x 1W speaker, 1 x mic 9. Battery: built-in 7.6V 5550mAh lithium battery, non-removable 10. WiFi: 2.4G+5.8G WiFi 802.11a/b/g/n/ac 11. Bluetooth: BT5.0 12. Sensor: Gravity sensor 13. Navigation: GPS, Beidou, Galileo, GLONASS 14. Interfaces: 1 x Type-C, 1 x USB3.0, 1 x Standard Micro SIM card slot, 1 x TF card slot, 1 x Micro HDMI, 1 x 12V/4A DC port, 1 x POGO 12PIN, 1 x 100/1000M RJ45, 1 x RS232 15. Size: 276x180.5x22.5mm 16. Weight: 1235g 17. Package Contents: 1 x Tablet PC, 1 x Charger, 1 x User manual, 1 x Hand grip strapSpecification: Package Weight One Package Weight 2.03kgs / 4.48lb One Package Size 34cm * 24cm * 8cm / 13.39inch * 9.45inch * 3.15inch Qty per Carton 10 Carton Weight 20.00kgs / 44.09lb Carton Size 34cm * 50cm * 42cm / 13.39inch * 19.69inch * 16.54inch Loading Container 20GP: 373 cartons * 10 pcs = 3730 pcs40HQ: 867 cartons * 10 pcs = 8670 pcs

Lis Plus Moins

1. Operating system: Windows 11 2. CPU: Intel JASPER LAKE N5100 Quad Core 4 Thread 1.1GHz-2.8GHz 3. GPU: Intel UHD Graphics 4. Screen: 10.1 inch IPS, 1280x800 resolution, 10-point touch G+G screen, hardness more than 7H, support rubber glove touch screen 5. Memory: 8GB RAM + 128GB ROM 6. Extended storage: External TF card up to 1TB (not included) 7. Camera: front 5.0MP fixed focus, rear 8MP auto focus 8. Audio: 2 x 1.2W speaker, 1 x mic 9. Battery: built-in 7.6V 5550mAh lithium battery, non-removable 10. WiFi: 2.4G+5.8G WiFi 802.11a/b/g/n/ac 11. Bluetooth: BT4.0 12. Sensor: Gravity sensor 13. Navigation: GPS, GLONASS 14. Interfaces: 1 x Type-C, 1 x USB3.0, 1 x 3.5mm headphone jack, 1 x Standard Micro SIM card slot, 1 x TF card slot, 1 x Micro HDMI, 1 x 12V/4A DC port, 1 x POGO 12PIN, 1 x RJ45, 1 x RS232 15. Size: 276x180.5x22.5mm 16. Weight: 1235g 17. Package Contents: 1 x Tablet PC, 1 x Charger, 1 x User manual, 1 x Hand grip strapSpecification: Package Weight One Package Weight 2.03kgs / 4.48lb One Package Size 34cm * 24cm * 8cm / 13.39inch * 9.45inch * 3.15inch Qty per Carton 10 Carton Weight 20.00kgs / 44.09lb Carton Size 34cm * 50cm * 42cm / 13.39inch * 19.69inch * 16.54inch Loading Container 20GP: 373 cartons * 10 pcs = 3730 pcs40HQ: 867 cartons * 10 pcs = 8670 pcs

Lis Plus Moins

1. Tempered glass panel screen with responsive touch, high-definition display, and durable design2. Capacitive 10-point touchscreen featuring sensitive touch, intuitive operation, and rapid response for efficient and convenient development3. Supports landscape and portrait display modes. Default setting is landscape; portrait mode can be enabled via software configuration4. Excellent heat dissipation with all-metal housing and efficient thermal design. Pre-drilled mounting holes on the back facilitate integration and embedding.5. Highly integrated with powerful performance, featuring an ESP32-P4-Core module design. Includes built-in ESP32-P4 and 32MB NOR Flash.6. Onboard ESP32-C6-MINI module extends ESP32-P4 with 2.4GHz Wi-Fi 6 and Bluetooth 5 (LE), communicating via SDIO protocol for stable connections and efficient data transfer7. Onboard ES8311 audio codec and ES7210 echo cancellation circuit, paired with dual microphones and speaker to meet daily audio application needs8. Supports AI voice interaction with mainstream AI platforms, enabling integration with online large model platforms, such as Doubao, DeepSeek, and other AI modelsScreen specifications1. Resolution: 7 inch: 120 x 1280; 8 inch/10.1 inch: 800 x 12802. Communication interface: MIPI 2-lane3. Brightness: 7 inch: 450 cd/square meter; 8 inch/10.1 inch: 400 cd/square meter4. Driver chip: 7 inch: ILI9881C; 8 inch/10.1 inch: JD93655. Touch chip: GT92716. Display size: 7 inch: 8.8 x 15.5cm; 8 inch: 10.824 x 172.82cm; 10.1 inch: 13.596 x 21.718 cm7. Contrast ratio: 7 inch: 800:1; 8 inch: 1200:1; 10.1 inch: 800:18. Viewing angle: 7 inch: 170°; 8 inch/10.1 inch: 178°9. Operating temperature: 0-60°C10. Pixel size: 7 inch: 0.12075 x 0.12075mm; 8 inch: 0.13455 x 0.13455mm; 10.1 inch: 0.1692 x 0.1692mmFront camera specifications1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 megapixels4. Aperture: F2.45. Focal length: 3.89mm6. Diagonal field of view: 72.9°7. Distortion: less than 1.5%8. Depth of field: 20cm to infinity9. Image: static image resolution 2592 x 1944 pixels10. Video: 1920 x 1080p at 30fps, 1280 x 720p at 60fps, 640 x 480p at 60fps, 640 x 480p at 90fpsPackaging list:- Host x 1- RPI-HMI press plate x 4- Screw pack x 1- 2PIN battery terminal about 80mm x 1Specification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 24cm * 16cm * 5cm / 9.45inch * 6.3inch * 1.97inch Qty per Carton 28 Carton Weight 14.00kgs / 30.86lb Carton Size 50cm * 37cm * 34cm / 19.69inch * 14.57inch * 13.39inch Loading Container 20GP: 423 cartons * 28 pcs = 11844 pcs40HQ: 984 cartons * 28 pcs = 27552 pcs

Lis Plus Moins