Résultats de la recherche pour "Adapter USB Microphone"
-
OMS-M18 Bluetooth Adapter 5.3 Bluetooth Lossless Audio Transmission Receiver, OMS-M18
1. Aluminum alloy appearance, sturdy and durable2. Bluetooth 5.3 + DSP dual chip decoding, compatibility and stability stronger 3. Bluetooth receiving, Bluetooth transmitting, microphone singing three-in-one design 4. Receiving mode upgrade one to two, can connect two cell phones at the same time to listen to songs5. Equipped with RGB cool breathing lights, multi-color flashing breathing gradient6. Built-in digital signal to analog chip, support for digital fiber, coaxial, AUX, RCA interface7. Equipped with DSP chip, independent control of high and low sound, professional DSP decoding chip8. Support a variety of lossless decoding format AAC/SBC, sound quality is more dynamic9. Built-in 1200mAh rechargeable lithium battery, listening to 8 hours, full 1.5 hours, standby life up to 30 days 10. Support USB (U disk) playback and transmission11. Support 5-8 meters infrared remote control, a variety of functions at a glance12. Simple connection without any driver and download APP13. Two external 2.4G Bluetooth antennas, transmission distance up to 30-50 metersParameters:1. Bluetooth version: bluetooth V5.32. Support protocol: RX: A2DP AVRC; TX: A2DP3. Working frequency band: 2.402GHz -2.480GHz4. Power level: 2 levels5. Sensitivity: -85dBm less than 0.1 percent BER6. Signal-to-noise ratio: greater than or equal to 90dB7. Distortion: less than or equal to 0.1 percent8. Interface type: input: 3.5mm AUX + RCA + optical + coaxial + USB; output: 3.5mm AUX + RCA9. Optical parameters: support for optical input, sample rate support 32/44.1/48/96/192KHz, 24bit10. Support format: MP3/WAV/WMA/APE/FLAC/M4A/ALAC/AMR11. Support protocols: AAC + SBC lossless protocols12. Operating current: less than 40mA13. Built-in battery: 3.7V/1200mAh (3.7W)14. Charging current: about 1200mA15. Charging time: about 1.5 hours16. Battery life: RX about 10 hours, TX about 10-12 hours17. Bluetooth distance: 30-50M (without obstacles)18. Charging method: Type-C 5V/1200mA19. Size: 119 x 111 x 104mm20. Weight: 272.5gPacking list:- Main unit x 1- Type-C charging cable x 1- 3.5mm audio cable x 1- Red and white RCA lotus cable x 1- Infrared remote control x 1- Remote control batteries x 2 (button batteries)- Bluetooth antenna x 2Specification: Package Weight One Package Weight 0.49kgs / 1.09lb One Package Size 21cm * 15cm * 7cm / 8.27inch * 5.91inch * 2.76inch Qty per Carton 20 Carton Weight 11.00kgs / 24.25lb Carton Size 44cm * 37cm * 32cm / 17.32inch * 14.57inch * 12.6inch Loading Container 20GP: 511 cartons * 20 pcs = 10220 pcs40HQ: 1188 cartons * 20 pcs = 23760 pcs
£21.99
-
MECHANIC Mechanic Action3 HDMI / USB Thermal Imaging 4K HD Microscope Camera, Mechanic Action3 EU Plug, Mechanic Action3 US Plug
Specification:1. Model: Action 32. Size: 63 x 63 x 45mm3. Image sensor: SONY IMX678 1/1.8 inch CMOS sensor4. Video output: 4K/1080P (HDMI output); 4K(USB output)5. USB resolution: 3840x2160@30FPS, 1920x1080P@60FPS6. Pixel size: 2.0×2.0 micrometer 7. Resolution: 3840x2160@60FPS(4K)8. Dual output: HDMI and USB output9. Image zooming: 15X zoom10. Microphone: 3.5mm stereo jack11. Lens interface: Standard C/CS interface12. Language: Chinese, English13. Working voltage: DC 12V/1000mA14. Storage: U-disk storage15. USB interface: 1Pcs USB 3.0 (Type-C) for control and data transfer /2Pcs USB 2.0 for mouse /U disk; 1Pcs USB 2.0 external control interfaceFeatures:1. Move freely, the motherboard without lag, the picture is smooth and clear without any trailing or delay2. This camera makes a breakthrough by supporting an external thermal imaging signal source; the optical image and temperature distribution are displayed in real time and synchronously on the screen, making the temperature characteristics clear at a glance3. Say goodbye to multi-screen switching, micro-morphology and temperature distribution are presented on the same screen. The camera innovatively realizes the synchronous display of optical images and thermal imaging images on a single screen4. Support thermal imaging signal access+dual-channel microphone audio pickup, let your scientific research, testing, and teaching not only see clearly, but also hear and measure accurately5. The microscope camera redefines the operation experience with a one-click design, a physical photo-taking key and video-recording key, no need to rely on computer clicks, just press with your finger and it responds immediately6. More powerful hardware and software algorithms, HDR wide dynamic range make the image clearer and more realistic, with a higher degree of reproduction.7. With an aerospace-grade aluminum alloy forged body and a futuristic mecha-style design, this microscope camera is not only a powerful assistant in the laboratory but also a masterpiece of technological aestheticsPackage includes:1 x Camera1 x HDMI Cable1 x Power Adapter1 x Mouse1 x Type-C CableSpecification: Package Weight One Package Weight 0.85kgs / 1.88lb One Package Size 20cm * 16cm * 10cm / 7.87inch * 6.3inch * 3.94inch Qty per Carton 20 Carton Weight 18.00kgs / 39.68lb Carton Size 42cm * 52cm * 34cm / 16.54inch * 20.47inch * 13.39inch Loading Container 20GP: 359 cartons * 20 pcs = 7180 pcs40HQ: 833 cartons * 20 pcs = 16660 pcs
£282.99
-
USB Dictaphone Digital Audio Voice Recorder with WAV MP3 Player VAR Function, SK-012 4GB, SK-012 16GB, SK-012 32GB
Features1. Built-in 250mAh battery, use time 25h. 2. One-key recording, with LCD recording indicator, easy to operate. 3. 6 recording modes, 3D sound effects, support voice activation function (VAR). 4. Support loop/A-B repeat/pause/delete. Equipped with a telephone adapter to support telephone conversation recording. 5. Small pocket size, good as MP3 music player. 6. Built-in microphone and speaker, with external microphone and earphone. Specification1. Recording format: WAV format 2. Recording power: 0.8mA-12mA 3. Recording sampling rate: 8KHz/16KHz/48KHz 4. Recording bit rate: WAV (32/128/192/384Kbps) 5. Music playback format: MP3, WAV 6. Headphone jack: 3.5pie stereo jack 7. Headphone output: (L) 9mW???(R) 9mW (32Ohm) max 8. USB interface: MICRO-Mike 5P/DC5V-300MAh 9. Storage: Embedded Flash 10. Built-in speaker output: 800mW 11. Built-in speaker: 8R/0.5W diameter 26 12. Built-in MIC: Omni-directional capacitor MIC 13. Display: 1.0 inches 14. Distortion: 90dB 15. Signal to noise ratio: 0.06% 16. Operating temperature: -10 to 40 degrees Celsius 17. Body weight: 32.5g (bare metal) 18. Body size: 85mm??36mm??14mm 19. Power supply mode: lithium battery/3.2-4.2V 20. Battery type: LiCoO2 21. Battery capacity: 250MAh 22. Battery weight (g): 4g 23. Watt hours per battery: 0.81wh 24. Lithium content: 0.066g 25. Battery size: 3.5mm x 14mm x 55mm 26. Battery life: about 30 hours of recording, about 6 hours of playback (plug in headphones) 27. Support system: Windows XP&Vista/2K/ME/98 (driver installation required) /Mac OS 10Package listRecorder x 1 Headphone x 1 Microphone x 1 USB cable x 1 Telephone adapter x 1 Telephone line cable x 1 Audio cable x 1 User Manual (English) x 1 Specification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 17.10kgs / 37.70lb Carton Size 50cm * 28cm * 40cm / 19.69inch * 11.02inch * 15.75inch Loading Container 20GP: 476 cartons * 100 pcs = 47600 pcs40HQ: 1105 cartons * 100 pcs = 110500 pcs
£10.99 - £15.99
-
1080P Wearable Glasses Camera – Hands-Free USB Camera with Noise-Reducing Mic
🎥 Capture hands-free moments without holding a camera.This 1080P wearable glasses camera is designed for convenient hands-free recording, with USB connectivity and a noise-reducing microphone for clearer captured audio.🎯 When carrying a camera gets in the wayThe wearable format keeps recording hands-free, making it practical when you need both hands available.✅ Key benefits 1080P video recording Wearable hands-free design USB connectivity Noise-reducing microphone 🛍️ Ready to record hands-free? Add it to your setup.📸 More Product Photos
£31.99
-
T40 2 In 1 Bluetooth 5.1 Receiver NFC Transmitter Car AUX Adapter, T40 2 In 1
1. Back clip design, firm and not falling, easy to clip clothes 2. Mini design, easy to wear 3. Convert the wired device into a bluetooth signal, and wirelessly transmit it to the bluetooth device for output 4. Independent DAC decoding chip, high dynamic range signal-to-noise ratio SNR is greater than 120 decibels, sound details are restored and transparent, and you can enjoy HIFI sound quality 5. Bluetooth 5.1 refuses to freeze exercise, stable and fast connection 6. Smart NFC, one-touch pairing, just get close to the mobile device for quick bluetooth pairing 7. Receive/transmit, MIC call, 2.5mm+3.5mm headphone output, camera function, TF card, lossless sound quality 8. Supports connecting two mobile phones at the same time, and the two mobile phone cases can be used arbitrarily 9. TF card playback, no need to carry a mobile phone, support MP3 WMA / WAV / APE / FLAC and other formats for playback, you can enjoy music without Bluetooth connection to your mobile phone 10. Built-in high-sensitivity independent microphone, supports high-definition voice calls on mobile phones/computers, video conferencing or game blackout, can handle it easily 11. The low battery can be used while charging, which is convenient and worry-free 12. One-key photo function: in RX mode, turn on the camera, and short press the photo button to take a photo 13. Material: ABS+PC 14. Listening time: 10 hours 15. Charging time: 2 hours 16. Battery capacity: 200mah 17. Power mode: USB charging / built-in lithium battery 18. Charging voltage: DC 5V 19. Transmission rate: 3Mbps 20. Operating frequency: 2.4MHz 21. Operating range: less than or equal to 10 meters 22. Bluetooth protocol: AVRCP / A3DP / HFP / HSP 23. Product list: Bluetooth receiver, packing box, 3.5mm audio head, manual, power supply cable 24. Weight: about 24.4g Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 8.2cm * 11cm * 2.5cm / 3.23inch * 4.33inch * 0.98inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs
£3.99
-
OMS-M13 Pro NFC Bluetooth Audio Adapter Bluetooth 5.3 Receiver And Transmitter 2 In 1, OMS-M13 Pro
1. Support one transmitter and two receivers, can be connected to two bluetooth playback devices at the same time to use2. Bluetooth 5.3 chip design, compatibility and stability is stronger3. Bluetooth receiver / bluetooth transmitter 2-in-1 design4. Equipped with high-definition LED digital display screen, full-screen display of the working status and Bluetooth mode is clearly visible5. Built-in digital signal to analog chip, support for digital fiber optic, coaxial, AUX, RCA interfaces6. Wireless NFC sensor function, cell phone contact to connection/disconnection7. Cool RGB colorful light, multi-color adjustable, soft and not blinding8. 1000mAh rechargeable high-capacity lithium battery, full of about 1.5h, about 10-12 hours of continuous listening, standby about 30 days9. Support USB ((U disk) playback and launch, support a variety of lossless format audio file playback10. Built-in high-definition microphone, support for wireless listening, hands-free communication, navigation11. Simple connection, without any driver and download APPParameters:1. Bluetooth version: bluetooth V5.32. Support protocol: RX: A2DP AVRC TX: A2DP 3. Working frequency band: 2.402GHz -2.480GHz4. Sensitivity: -85dBm less than 0.1 percent BER 5. Signal-to-noise ratio: greater than or equal to 90dB6. Distortion: less than or equal to 0.1 percent7. Interface type: Input: 3.5mm AUX + RCA + optical + coaxial + USB; Output: 3.5mm AUX + RCA8. Optical parameters: support for optical input, sample rate support 32/44.1/48/96/192KHz, 24bit9. Support format: MP3/WAV/WMA/APE/FLAC/M4A/ALAC/AMR10. Screen size: 25 x 10mm LEDs11. Operating current: less than 40mA12. Built-in battery: 3.7V/1000mAh (3.7W)13. Charging current: about 1000mA14. Charging time: about 1.5 hours15. Battery life: RX about 10H, TX about 10-12H16. Bluetooth distance: 10-20M (without obstacles)17. Charging method: Type-C 5V/1000mA18. Size: 99.5 x 75 x 24.2mm19. Weight: 105.55gPacking list: host + Type-C charging cable + 3.5mm audio cable + red and white RCA lotus cable + instructionsSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 50 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 50 pcs = 21900 pcs40HQ: 1018 cartons * 50 pcs = 50900 pcs
£12.99
-
M6 NFC Bluetooth 5.0 Receiver & Transmitter & FM 3 In 1 Adapter, M6
1. Working voltage: DC 5V/500mA2. Bluetooth version: V5.0+EDR3. Frequency response: 10Hz-20KHz4. Battery capacity: 3.7V/500mAh lithium battery5. Transmission distance: about 15 meters without barriers6. Power supply mode: Micro USB interface7. Music format: MP3/APE/FLAC/WAV/WMA8. Frequency range: 2400-2483.5MHZ9. Peripheral support: U disk/TF card10. Bluetooth protocol: HFP/A2DP/AVRCP11. Interface type: AUX+RCA+coaxial+optical fiber12. Basic functions: Bluetooth receiving/transmitting, LED digital display screen, NFC connection, infrared remote control, call, navigation, listening to music13. Support equipment: mobile phones, tablets, computers, TVs, cable speakers, power amplifiers, projectors, mixers, etc.14. Packing list: host x1, Micro USB charging cable x1, 3.5mm audio cable x1, red and white RCA lotus cable x1, remote control (with button battery) x1, manual x115. Weight: about 75g16. Size: about 9.2x6.5x2 cmFeatures:1. The appearance is exquisite, exquisite and compact, easy to carry, the surface is made of fireproof PC material, high-gloss paint process, the base is equipped with a silicone pad, which is non-slip and wear-resistant2. Using Bluetooth 5.0 chip design, stronger compatibility and stability3. 3 in 1 design of Bluetooth receiver (RX), Bluetooth transmitter (TX) and FM transmitter4. High-definition LED digital display, working status and Bluetooth mode are clearly visible5. Built-in digital to analog chip, multiple interface options, support digital optical fiber, coaxial, AUX, RCA interface6. NFC function, mobile phone can be connected with one touch7. Cool breathing light, red/blue color, soft and not dazzling8. Support USB (U-disk), TF card playback and transmission9. Support FM transmission, and the frequency can be adjusted from 87.5~10810. With remote control, support infrared remote control of about 5-8 meters, easy to operate11. Built-in high-definition microphone, support wireless music listening, hands-free call, navigation12. Simple connection, multi-function button control, support play/pause/cut song/volume/mode switch/signal source switch and other functions, feel comfortable13. Built-in memory chip, can automatically restore the mode/signal/song before the power failure, intelligent voice reminder functionSpecification: Package Weight One Package Weight 0.18kgs / 0.40lb One Package Size 12cm * 12cm * 3.5cm / 4.72inch * 4.72inch * 1.38inch Qty per Carton 162 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 162 pcs = 28674 pcs40HQ: 412 cartons * 162 pcs = 66744 pcs
£10.99
-
PULUZ PULUZ 4 in 1 Vlogging Live Mini Octopus Bracket Kit + Studio Light + Microphone + Phone Clamp Kits, 4 in 1 Tripod
Tripod Holder1. Made with ABS + high-density rubber-coated robust which makes it sturdier, more durable and better the skid resistance. 2. The desk tripod stand is lightweight and mini size, easy to storage and travel comfort. It can easily be placed in your backpack. 3. 360 degree rotation ballhead allows you to capture good shot. 4. Flexible tripod legs which allow you to angle your camera in various angles while capturing those special moments. You can also place it anywhere you can think of, like lampposts, fence posts, tree limbs, chairs, doorknobs etc. 5. 1/4 inch screw is fully Applicable for Nikon, Canon, Pentax Sony, Panasonic, Olympus, Kodak, Fujifilm, Casio, GoPro Action cameras etc. 6. With gear limiting, load: 2KGStudio Light1. This is camcorder professional LED camera light. 2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography. 3. Include independent power switch and keep the same brightness out when switch it on again. 4. Support 4 x AA batteries (batteries not included) power input, more convenient to use. 5. Support external power input (Type-C port), suitable for long time use. 6. Built-in 104 pieces high quality LED beads. 7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere. 8. Highly efficient, power-saving, low energy consumption. 9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod. 10. With dual cold shoes slots, can install microphones or cellphone. 11. With a 1/4 inch female screw for Canon, Nikon, Sony, and other Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos. Specifications 1. Material: ABS 2. Color temperature: 3200-6400K 3. Brightness: 1800LM 4. Lamp beads: 104pcs 5. Index: Ra>97 6. Size 10.5 * 8.8 * 3.5cm 7. Power supply: TYPE-C/4 x AA battery (not included) 8. Input voltage: 5VMicrophone1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5VPhone Clamp1. Made of high quality sponge rubber protective and plastic body, durable and appropriate protection of mobile phone. 2. Base and back each has a 1/4 inch screw holes,can connect to 1/4 inch screw of any device. 3. Sponge and rubber mat protect mobile phone from scratch. 4. This is a mobile phone accessory, apply to selfie stick, tripod mount, monopod and more. 5. With a cold shoe base to install a flash and micophone with cold shoe adapter. 6. Clamp range: 5.8cm to 8.5cm, almost can clip all the mobile phones. 7. Perfect for taking selfies and recording videos hands free.Package List1. Tripod Holder x 1 2. Studio Light x 1 3. Microphone x 1 4. Phone Clamp x 1 5. Bluetooth Remote Control x 1 6. Wind Shield x 1 7. USB Cable x 1 8. Filter Plates x 2 9. 3.5mm Audio Adapter Cable x 2 10. Protective Bag x 1 11. Color Package Box x 1Specification: General Compatible with Apple: iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone SE 2020, iPhone 11 Pro, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus Samsung: Galaxy S21 Ultra 5G, Galaxy S20 FE 5G, Galaxy Note20, Galaxy A21s, Galaxy S20 Ultra 5G, Galaxy S20, Galaxy A20e, Galaxy S10+, Galaxy S10e Gopro: HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, Fusion, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Package Weight One Package Weight 0.52kgs / 1.16lb One Package Size 35cm * 20cm * 6cm / 13.78inch * 7.87inch * 2.36inch Qty per Carton 20 Carton Weight 13.80kgs / 30.42lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 20 pcs = 11080 pcs40HQ: 1286 cartons * 20 pcs = 25720 pcs
£19.99
-
PULUZ PULUZ 3 in 1 Vlogging Live Broadcast Smartphone Video Rig + Microphone + 4.7 inch 12cm Ring LED Selfie Light Kits with Cold Shoe Tripod Head for iPhone, Galaxy, Huawei, Xiaomi, HTC, LG, Google, and Other Smartphones, 3 in 1 Ring LED
Vlogging Rig1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A good tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.Ring LED1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle (The holder is not included). 2. The ring light is made of 40pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography. 4. 3 colors lighting mode adjustable brightness for your choose,you can adjust the color and brightness very easily, good brightness can be achieved without installing extra colorful filters. Three colors of soft natural light illuminate your beauty in different occasions. 5. The USB ports can be used with multiple devices, such as connect computer host, laptop, mobile power and USB charger. You will be able to enjoy LED ring light at any time free. 6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc. 7. The function of heat dissipation: Metal shell, even if it is used for a long time,there is no need to worry that the lamp will be hot. 8. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.Ring LED Specifications1. Number of beads: 40pcs 2. Lamp bead model: 2835 3. Lamp brightness: 24-26lm 4. White light color temperature: 6500K 5. Warm white color temperature: 3200K 6. Power: 4-8W 7. Voltage: 5V 8. Indicates: Ra>82 9. Dimming range: 1%-100% 10. Shell material: aluminum 11. Dimensions: outer diameter 120mm. inner diameter 86mm 12. Power supply: USB port power supplyMicrophone1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5VPackage List1. Ring LED Light x 1 2. Video Rig x 1 3. Cold Shoe Tripod Head x 1 4. Microphone x 1 5. 3.5mm Audio Adapter Cable x 2 5. Color Package Box x 1Specification: General Compatible with Apple: iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XR, iPhone X, iPhone 7 Plus, iPhone 6s, iPhone 6 Plus, iPhone 5S Package Include Package Contents Video Rig x 1 Ring LED Light x 1 Microphone x 1 Cold Shoe Tripod Head x 1 3.5mm audio adapter cable x 2 Color Package Box x 1 Package Weight One Package Weight 0.79kgs / 1.73lb One Package Size 27cm * 16cm * 7cm / 10.63inch * 6.3inch * 2.76inch Qty per Carton 30 Carton Weight 22.50kgs / 49.60lb Carton Size 54cm * 42cm * 38cm / 21.26inch * 16.54inch * 14.96inch Loading Container 20GP: 309 cartons * 30 pcs = 9270 pcs40HQ: 718 cartons * 30 pcs = 21540 pcs
£11.99
-
SK-012 8GB Voice Recorder USB Professional Dictaphone Digital Audio With WAV MP3 Player VAR Function Record, SK-012 8GB
Features1. Built-in 250mAh battery, use time 25h. 2. One-key recording, with LCD recording indicator, easy to operate. 3. 6 recording modes, 3D sound effects, support voice activation function (VAR). 4. Support loop/A-B repeat/pause/delete. Equipped with a telephone adapter to support telephone conversation recording. 5. Small pocket size, good as MP3 music player. 6. Built-in microphone and speaker, with external microphone and earphone.Specification1. Recording format: WAV format 2. Recording power: 0.8mA-12mA 3. Recording sampling rate: 8KHz/16KHz/48KHz 4. Recording bit rate: WAV (32/128/192/384Kbps) 5. Music playback format: MP3, WAV 6. Headphone jack: 3.5pie stereo jack 7. Headphone output: (L) 9mW???(R) 9mW (32Ohm) max 8. USB interface: MICRO-Mike 5P/DC5V-300MAh 9. Storage: Embedded Flash 10. Built-in speaker output: 800mW 11. Built-in speaker: 8R/0.5W diameter 26 12. Built-in MIC: Omni-directional capacitor MIC 13. Display: 1.0 inches 14. Distortion: 90dB 15. Signal to noise ratio: 0.06% 16. Operating temperature: -10 to 40 degrees Celsius 17. Body weight: 32.5g (bare metal) 18. Body size: 85mm??36mm??14mm 19. Power supply mode: lithium battery/3.2-4.2V 20. Battery type: LiCoO2 21. Battery capacity: 250MAh 22. Battery weight (g): 4g 23. Watt hours per battery: 0.81wh 24. Lithium content: 0.066g 25. Battery size: 3.5mm x 14mm x 55mm 26. Battery life: about 30 hours of recording, about 6 hours of playback (plug in headphones) 27. Support system: Windows XP&Vista/2K/ME/98 (driver installation required) /Mac OS 10Package listRecorder x 1 Headphone x 1 Microphone x 1 USB cable x 1 Telephone adapter x 1 Telephone line cable x 1 Audio cable x 1 User Manual (English) x 1 Specification: General Certificate CE Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 13.5cm * 8cm * 5cm / 5.31inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 50cm * 28cm * 40cm / 19.69inch * 11.02inch * 15.75inch Loading Container 20GP: 476 cartons * 100 pcs = 47600 pcs40HQ: 1105 cartons * 100 pcs = 110500 pcs
£11.99
-
M416 Car Bluetooth Receiver Player Audio Receiver Adapter AUX Converter, M416 Rose Red, M416 Silver, M416 Black, M416 Gold, M416 Royal Blue, M416 Dark Violet
1. Battery capacity: 120mAh2. Usage time: about 10h3. Sensitivity: -42dB4. Charging interface: Type-C/USB-C5. Bluetooth version: 5.36. Transmission distance: about 10m7. Signal to noise ratio: greater than 90dB8. Frequency response: 20Hz-20KHz9. Output power range: 33mW RL = 16 ohms10. Audio transmission mode: a2dp\avctp\avdtp\avrcp\hfp11. Frequency range: 2400-2483.5MHz12. Size: about 8.75 x 1.4cmFeatures:1. Widely compatible, plug and play, audio devices with AUX input interface can be used2. Mobile phone connected to the car stereo, the music in the phone can listen to, support navigation broadcast, safe travel3. Built-in microphone, hands-free amplification, clear calls, safer driving4. Power on automatically back to connect, easy to use5. Connect audio / headphones, wired to wireless6. Bluetooth 5.3, low power consumption, high speed, stable transmission7. Built-in high-performance decoding module, with Bluetooth 5.3 lossless transmission, high-definition sound quality, stereo sound effect8. Built-in digital noise reduction chip, improve voice sensitivitySpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs40HQ: 412 cartons * 468 pcs = 192816 pcs
£4.99
-
PULUZ PULUZ 3 in 1 Vlogging Live Broadcast LED Selfie Light Smartphone Video Rig Kits with Microphone + Cold Shoe Tripod Head for iPhone, Galaxy, Huawei, Xiaomi, HTC, LG, Google, and Other Smartphones, 3-in-1, 3-in-1(Red), 3-in-1(US)
Studio Light1. This is camcorder professional LED camera light. 2. Mini design, easy to take in pocket and light for phone photography or DSLR camera photography. 3. Include independent power switch and keep the same brightness out when switch it on again. 4. Support 4 x AA batteries (batteries not included) power input, more convenient to use. 5. Support external power input (Type-C port), suitable for long time use. 6. Built-in 104 pieces high quality LED beads. 7. Rotating the switch can adjust the brightness without filter plates, suitable for a variety of photography atmosphere. 8. Highly efficient, power-saving, low energy consumption. 9. Can be fixed in the camera hot shoe socket, use on professional light frame or camera tripod. 10. With dual cold shoes slots, can install microphones or cellphone. 11. With a 1/4 inch female screw for Canon, Nikon, Sony, and othe Camcorder. In additional, it could be used on a 1/4 inch tripod to help Phone owner to take wonderful videos and photos.Microphone1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5VVlogging Rig1. It is a must-have for you, if you love recording high quality videos. It makes shooting videos much easier since you have a much better grip with two handles. 2. With 3 standard shoe mount slot, you can get lighting and microphone attachments. A fantastic tool for who need take higher quality phones or videos close to professional level. 3. The special design will enable you to take steady shots and capture unique life experiences 4. A must-have accessory for anyone wanting to improve their filmmaking skills with a phone that shoots better images than many high end cameras. You can mount it with any tripod, slider or dollies. 5. Compatible with iPhone /Samsung / Huawei / OPPO / vivo / Xiaomi most smartphone with or without a case from 1.7 inch to 4.3 inch wide.Package List1. Vlogging Rig x 1 2. Microphone x 1 3. Cold Shoe Tripod Head x 1 4. USB Cable x 1 5. Video Selfie Light x 1 6. 3.5mm Audio Adapter Cable x 2 7. Color Package Box x 1Specification: General Material PC, ABS Socket Size 1/4 inch Product Size 25*13*4cm(Video Rig) Weight 164g(Video Rig) Package Include Package Contents Video Rig x 1 USB Cable x 1 Microphone x 1 Studio Light x 1 Cold Shoe Tripod Head x 1 3.5mm audio adapter cable x 2 Color Package Box x 1 Package Weight One Package Weight 0.44kgs / 0.97lb One Package Size 27cm * 16cm * 7cm / 10.63inch * 6.3inch * 2.76inch Qty per Carton 30 Carton Weight 11.43kgs / 25.20lb Carton Size 54cm * 38cm * 42cm / 21.26inch * 14.96inch * 16.54inch Loading Container 20GP: 309 cartons * 30 pcs = 9270 pcs40HQ: 718 cartons * 30 pcs = 21540 pcs
£16.99