Résultats de la recherche pour "phone case adapter"

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.58kgs / 3.48lb One Package Size 31cm * 23cm * 11cm / 12.2inch * 9.06inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 33cm * 24cm / 18.9inch * 12.99inch * 9.45inch Loading Container 20GP: 701 cartons * 4 pcs = 2804 pcs40HQ: 1628 cartons * 4 pcs = 6512 pcs

Lis Plus Moins

Features1. 6.78 inch 2700x1224 OLED screen, 1.07 billion colors, small body, wide field of vision. 2. Qualcomm Snapdragon 8+ Gen1 octa core, 1 x Cortex-X2 3.0GHz + 3 x Cortex-A710 2.5GHz + 4 x Cortex-A510 1.8GHz processor, high performance, run fast and operate smoothly. 3. Combine with 12GB+256GB large memory, good for watching video and playing games. 4. Equipped with 4 cameras, 3 rear cameras and 1 front in-screen cameras, take high quality pictures and excellent selfie. Rear camera: 200MP ultra-clear outsole main camera (f/1.9 aperture) + 12MP ultra-wide-angle macro lens (f/2.2 aperture) + 32MP telephoto portrait lens (f/2.4 aperture, supports OIS optical image stabilization); Front camera: 50MP portrait lens (f/2.4 aperture) + 2MP depth lens (f/2.4 aperture). 5. Photography function: Rear camera: Dynamic photo, time-lapse photography, AI photography, AI video, super wide-angle, large aperture, multi-lens video, night scene mode, portrait mode, professional photo, video, slow motion, panorama mode, HDR photo, HDR video, Filters, watermarks, document scanning, super macro, smile capture, voice-activated camera, timer shooting, continuous shooting, high-pixel mode, protagonist mode, night scene video, micro-movie, etc. Front camera: Dynamic photo, portrait mode, time-lapse photography , night scene mode, filter, smile capture, selfie mirroring, voice-activated camera, timer capture, gesture capture, watermark mode, high-resolution mode, etc.. 6. Built in 5000mAh high capacity battery, the battery will make the phone last for several days in normal use.Network1. 2G network frequency: - GSM B2/B3/B5/B8 2. 3G network frequency: - WCDMA B1/B2/B4/B5/B8/B19 3. 4G network frequency: - FDD-LTE B1/B2/B3/B4/B5/B8/B19/B28A - TDD-LTE B34/B38/B39/B40/B41 4. 5G network frequency: - NR N1/N5/N8/N28A/N41/N77/N78Specification: Network Operator (Parts of Countries) France Bouygues 3G, SFR 3G, Orange 3G, Free 3G, Bouygues 4G, SFR 4G, Orange 4G, Free 4G UK 3 3G, Orange 3G, T-Mobile 3G, Vodafone 3G, O2 3G, 3 4G, EE 4G, Vodafone 4G, O2 4G Italy 3 3G, Vodafone 3G, TIM 3G, Vodafone 4G, TIM 4G, Wind Tre 4G Spain Movistar 3G, Orange 3G, Vodafone 3G, Yoigo 3G, Movistar 4G, Orange 4G, Vodafone 4G, Yoigo 4G Russia MTS 3G, MegaFon 3G, Beeline 3G, VimpelCom (Beeline) 4G, MTS 4G, MegaFon 4G, Motiv 4G, Tele2 (Rostelecom) 4G, Vainakh Telecom 4G, Tattelecom 4G Japan NTT DoCoMo 3G, SoftBank 3G, NTT DoCoMo 4G, SoftBank 4G, KDDI 4G General Model 90 Pro 5G REP-AN00 Central Processing Unit(CPU) Qualcomm Snapdragon 8+ Gen 1 Octa Core up to 3.0GHz GPU Adreno 730 SIM Quantity Dual SIM SIM Types Nano SIM Card OS System Android 13.0, Magic UI 7.1 RAM 12GB ROM 256GB Sensor Proximity sensor, Acceleration sensor, Gyroscope, compass, Screen Fingerprint sensor Support Language Arabic, Afrikaans, Bengali, Amharic, Bulgarian, Burmese, Dutch, Czech, Catalan, Croatian, Danish, French, English, Filipino, Finnish, Greek, German, Hindi, Hungarian, Hebrew, Indonesian, Italian, Japanese, Khmer, Malay, Latvian, Norwegian, Persian, Portuguese, Polish, Russian, Romanian, Serbian, Swedish, Spanish, Turkish, Thai, UKrainian, Vietnamese, Simple Chinese, Traditional Chinese, Urdu, Armenian, Zulu, Macedonian, Swahili, Estonian, Lithuanian, Slovak, Slovenian, Romansh Additional Features OTG, NFC,2D face recognition Fingerprint In-screen Network 5G N1 (TX: 1920-1980MHz, RX: 2110-2170MHz), N5 (TX: 824-849MHz, RX: 869-894MHz), N8 (TX: 880-915MHz, RX: 925-960MHz), N28A (TX: 703-733MHz, RX: 758-788MHz), N41(2496-2690MHz), N77 (3.3-4.2GHz), N78 (3.3-3.8GHz) 4G FDD-LTE 700(B28A)MHz, 850(B5)MHz, 850(B19)MHz, 900(B8)MHz, 1700(B4)MHz, 1800(B3)MHz, 1900(B2)MHz, 2100(B1)MHz 4G TDD-LTE 1880-1920(B39)MHz, 2010-2025(B34)MHz, 2300-2400(B40)MHz, 2570-2620(B38)MHz, 2496-2690(B41)MHz 3G WCDMA 850(B5)MHz, WCDMA 900(B8)MHz, WCDMA 1700(B4)MHz, WCDMA 1900(B2)MHz, WCDMA 2100(B1)MHz, WCDMA 850(B19)MHz 2G GSM 850(B5)/900(B8)/1800(B3)/1900(B2)MHz Type WCDMA, GSM, FDD-LTE, TDD-LTE, 5G Notes The actual network and frequency band usage depends on the deployment of local operators WIFI 802.11 a/b/g/n/ac/ax, 2x2 MIMO, 2.4GHz/5GHz GPS Yes, A-GPS, GLONASS, BDS, Galileo BT V5.2 Display Screen Size 6.78 inch Screen Type Capacitive, OLED Screen Color 1070M Resolution 2700 x 1224 pixels Refresh Rate 120Hz Aspect Ratio 19.85:9 Display Area 94.40% Multi-Touch 10 Points, Multi-point Camera Camera Quantity 4 Front Camera 50MP+2MP Back Camera 200MP+12MP+32MP Rear Flashlight Yes Camera Function OIS, EIS Aperture Rear: F1.9+F2.2+F2.4, Front: F2.4+F2.4 Video recording Yes Video Resolution 3840 x 2160 rear, 3840 x 2160 front Connectivity Ports 2 x Nano SIM card slots 1 x Type C Battery Battery Types Undetachable, Li-polymer Battery Battery Capacity 5000mAh Charging Time 42 minutes Quick Charge Yes Charging Power 100W, 20V/4.5A, Compatible with 11V/6A Dimensions & Weight Size 163.8 x 74.8 x 8.1mm Weight 192g Package Include Package Contents 1 x Phone 1 x Eject Pin 1 x Protective Case 1 x USB Cable 1 x US Plug Power Adapter Package Weight One Package Weight 0.54kgs / 1.19lb One Package Size 20cm * 20cm * 5cm / 7.87inch * 7.87inch * 1.97inch Qty per Carton 20 Carton Weight 12.00kgs / 26.46lb Carton Size 42cm * 42cm * 27cm / 16.54inch * 16.54inch * 10.63inch Loading Container 20GP: 559 cartons * 20 pcs = 11180 pcs40HQ: 1299 cartons * 20 pcs = 25980 pcs

Lis Plus Moins

Features 1. 6.82 inch 3168x1440 QHD+ AMOLED LTPO screen, 120Hz refresh rate, 93.5% screen ratio, 510 PPI pixel density. 2. Qualcomm Snapdragon 8 Gen 2 8-core processor, equipped with 16GB LPDDR5x + 256GB UFS4.0 large memory, run fast and operate smoothly. 3. 50MP triple back camera: 50MP IMX989 camera(1/1 CMOS, f/1.8, 86 degrees FOV) + 50MP periscope telephoto lens (1/1.56 CMOS, F/2.6, 36 degrees FOV) + 50MP ultra wide angle (1/1.56 CMOS, f/2, 112 degrees FOV). 32MP UHD front camera (f/2.4, 90 degrees FOV, auto-focus). Hasu mobile photography system, MariSilicon X independent image chip, to restore natural colors 4. Video shooting: rear 4K@60fps/30fps, 1080P @60fps/30fps, 720P@60fps/30fps, front 1080P/720P@30fps 5. Photography function: rear camera: photos, videos, night scenes, professional, panoramic, portrait, delay photography, slow movement, super text, long exposure, multi-view video, movie mode, XPAN, cute photography, AI ID photo. Front camera: photos, videos, panorama, portrait, night scene, delay photography, beauty selfie, screen supplement light, cute shooting, AI ID photo, etc. 6. Built-in 5000mAh battery, supports SUPERVOOC 100W flash charging, 50W wireless charging 7. Support under-screen fingerprint and face recognition unlock 8. Others features: IP68 grade dustproof and splashproof, smart ColorOS 13.1 system, wide coverage and low latency WiFi 7 Network frequency: - 5G SA: n1/n3/n41/n77/n78/n79/n5/n8/n28/n7/n20/n38/n40/n66 - 5G NSA: n41/n77/n78/n79 - 4G FDD-LTE: B1/2/3/4/5/7/8/12/17/18/19/20/26/28A/66 - 4G TD-LTE: B34/38/39/40/41 - 3G WCDMA: B1/2/4/5/8 - 2G GSM: 850/900/1800/1900MHz - 2G CDMA: BC0 Notices 1. It Supports Multi-languages, Google Play Store, OTA update. 2. But few Chinese APPs can not remove, and language translation not full one hundred percent. 3. Not Support Spanish languages and Portuguese languages.Specification: Network Operator (Parts of Countries) France Bouygues 3G, SFR 3G, Orange 3G, Free 3G, Bouygues 4G, SFR 4G, Orange 4G, Free 4G UK 3 3G, Orange 3G, T-Mobile 3G, Vodafone 3G, O2 3G, 3 4G, EE 4G, Vodafone 4G, O2 4G Italy 3 3G, Vodafone 3G, TIM 3G, Vodafone 4G, TIM 4G, Wind Tre 4G Spain Movistar 3G, Orange 3G, Vodafone 3G, Movistar 4G, Orange 4G, Vodafone 4G, Yoigo 4G Russia MTS 3G, MegaFon 3G, Beeline 3G, VimpelCom (Beeline) 4G, MTS 4G, MegaFon 4G, Motiv 4G, Tele2 (Rostelecom) 4G, Vainakh Telecom 4G, Tattelecom 4G Japan NTT DoCoMo 3G, SoftBank 3G, NTT DoCoMo 4G, SoftBank 4G, KDDI 4G General Model PGEM10 Central Processing Unit(CPU) Qualcomm Snapdragon 8 Gen 2 GPU Adreno 740 680MHz SIM Quantity Dual SIM SIM Types Nano SIM Card OS System Android 13.0 RAM 16GB ROM 256GB Sensor G-sensor, Ambient Light sensor, Proximity sensor, Acceleration sensor, Gyroscope, Hall sensor, Infrared Remote Control, Pedometer sensor, Color temperature sensor, Screen Fingerprint sensor, Geomagnetic sensor Support Language Arabic, Bengali, Burmese, Czech, English, French, Filipino, Hindi, Indonesian, Japanese, Khmer, Malay, Turkish, Thai, Vietnamese, Traditional Chinese, Nepali, Laotian, Korean, Tibetan, Uyghur Google Play Support Network WIFI Wi-Fi 7(802.11be), Wi-Fi 6(802.11ax), Wi-Fi 5(802.11ac), 802.11a/b/g/n/ GPS Yes, A-GPS, GLONASS, BDS, Galileo, QZSS BT V5.3 Display Screen Size 6.82 inch Screen Type AMOLED Screen Color 1070M Resolution 3168 x 1440 pixels Refresh Rate 120Hz Pixel Density 510 PPI Display Area 93.5% Camera Camera Quantity 4 Front Camera 32MP Beauty Function Yes Back Camera 50MP+50MP+50MP Rear Flashlight Yes Connectivity Ports 2 x Nano SIM card slots 1 x Type C Battery Battery Types Undetachable, Li-polymer Battery Battery Capacity 5000mAh Quick Charge Yes Charging Power 100W Dimensions & Weight Size 164.8 x 76.3 x 9.5mm Weight 216g Package Include Package Contents 1 x Phone 1 x Eject Pin 1 x Protective Case 1 x USB Cable 1 x US Plug Power Adapter 1 x Pre-protective film Package Weight One Package Weight 0.62kgs / 1.37lb One Package Size 22cm * 20cm * 5cm / 8.66inch * 7.87inch * 1.97inch Qty per Carton 20 Carton Weight 12.20kgs / 26.90lb Carton Size 46cm * 25cm * 42cm / 18.11inch * 9.84inch * 16.54inch Loading Container 20GP: 552 cartons * 20 pcs = 11040 pcs40HQ: 1281 cartons * 20 pcs = 25620 pcs

Lis Plus Moins

1. Ultra slim and lightweight body. 2. MTK6580 Quad core CPU, high performance, combine with 2GB+16GB memory, run fast and operate smoothly.. 3. 3.0 inch screen, 854x480px resolution display. 4. Front camera: 0.3MP camera, rear cameras 2.0MP take high quality pictures. 5. Built-in 1000mAh polymer battery non-removable battery, the battery will make the phone last for several days in normal use.Specification: General Model S23 Pro Central Processing Unit(CPU) MTK6580 Quad Core 1.3GHz Shell Material Plastic + Glass SIM Quantity Dual SIM SIM Types Nano SIM Card OS System Android 8.1 RAM 2GB ROM 16GB External memory TF card up to 64GB (not included) Sensor G-sensor, Light sensor, Proximity sensor Support Language Arabic, Burmese, Cambodian, English, French, Filipino, German, India, Indonesian, Italian, Malay, Persian, Portuguese, Russian, Spanish, Turkish, Thai, Vietnamese Network 3G WCDMA 850(B5)/900(B8)/1900(B2)/2100(B1)MHz 2G GSM 850/900/1800/1900MHz Type WCDMA, GSM WIFI 802.11a/b/g/n, 2.4GHz GPS Yes BT Yes, V4.0 Display Screen Size 3.0 inch Screen Type Capacitive Resolution 854 x 480 pixels Aspect Ratio 16:9 Camera Front Camera 0.3MP Back Camera 2MP Video recording Yes Media Format Video MP4, AVI Connectivity Ports 1 x Type C 2 x Nano SIM card or (1 x Nano SIM card + 1 x TF card) slots Battery Battery Types Undetachable, Li-polymer Battery Battery Capacity 1000mAh Dimensions & Weight Size 88.4 x 45.2 x 11mm Weight 65g Package Include Package Contents 1 x Phone 1 x Power Adapter 1 x Screen Protector 1 x Eject Pin 1 x Protective Case 1 x USB Cable Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 12cm * 7cm * 5cm / 4.72inch * 2.76inch * 1.97inch Qty per Carton 40 Carton Weight 6.80kgs / 14.99lb Carton Size 30cm * 23cm * 24cm / 11.81inch * 9.06inch * 9.45inch Loading Container 20GP: 1610 cartons * 40 pcs = 64400 pcs40HQ: 3738 cartons * 40 pcs = 149520 pcs

Lis Plus Moins

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Lis Plus Moins

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 31cm * 20cm * 11cm / 12.2inch * 7.87inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 42cm * 33cm * 24cm / 16.54inch * 12.99inch * 9.45inch Loading Container 20GP: 801 cartons * 4 pcs = 3204 pcs40HQ: 1861 cartons * 4 pcs = 7444 pcs

Lis Plus Moins

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 4.95kgs / 10.92lb One Package Size 43cm * 22cm * 24cm / 16.93inch * 8.66inch * 9.45inch Qty per Carton 4 Carton Weight 13.40kgs / 29.54lb Carton Size 46cm * 46cm * 50cm / 18.11inch * 18.11inch * 19.69inch Loading Container 20GP: 252 cartons * 4 pcs = 1008 pcs40HQ: 585 cartons * 4 pcs = 2340 pcs

Lis Plus Moins

Features1. Small, only bank card size, but full function. 2. All under control by single hand, very suitable for our palm, makes you feel comfortable from all sides due to our high tech artwork and precise design. 3. Dual SIM with dual standby 2 card slots, even smaller phone, you need dual SIM with dual standby, you can insert two SIM cards, you can also insert one SIM and one memory card. 4. MTK6739CW quad core up to 1.28GHz processor, good performance, combine with 3GB+32GB, run fast and operate smoothly. 5. 3.0 inch TFT screen, 854 x 480px resolution display., vivid color display screen. 6. 2MP front and 5MP rear cameras, with high quality sensor, you can have more beautiful photos and more capture functions. 7. Built-in 2000mAh battery, the battery will make the phone last for several days in normal use.Network1. 2G network frequency: - GSM: 850/900/1800/1900MHz 2. 3G network frequency: - WCDMA: B1/B5/B8 3. 4G network frequency: - FDD-LTE: B1/B3/B5/B7/B8/B20/B28/B28A - TDD-LTE: B34/B38/B39/B40/B41Specification: Network Operator (Parts of Countries) France Bouygues 3G, SFR 3G, Orange 3G, Free 3G, Bouygues 4G, SFR 4G, Orange 4G, Free 4G UK 3 3G, Orange 3G, T-Mobile 3G, Vodafone 3G, O2 3G, 3 4G, EE 4G, Vodafone 4G, O2 4G Italy 3 3G, Vodafone 3G, TIM 3G, Vodafone 4G, TIM 4G, Wind Tre 4G Spain Movistar 3G, Orange 3G, Vodafone 3G, Yoigo 3G, Movistar 4G, Orange 4G, Vodafone 4G, Yoigo 4G Russia MTS 3G, MegaFon 3G, Beeline 3G, VimpelCom (Beeline) 4G, MTS 4G, MegaFon 4G, Motiv 4G, Tattelecom 4G Japan NTT DoCoMo 3G, SoftBank 3G, NTT DoCoMo 4G, SoftBank 4G, KDDI 4G General Model 14 Pro Central Processing Unit(CPU) MTK6739CW Quad Core up to 1.28GHz Shell Material Plastic + Glass SIM Quantity Dual SIM SIM Types Nano SIM Card OS System Android 9.0 RAM 3GB ROM 32GB External memory TF card up to 128GB (not included) Sensor G-sensor, Light sensor, Proximity sensor Support Language Arabic, Dutch, French, English, Greek, German, Hebrew, Italian, Persian, Portuguese, Russian, Spanish, Turkish Additional Features FM Radio, OTG, Face unlock Google Play Support Network 4G FDD-LTE 700(B28A)MHz, 800(B20)MHz, 850(B5)MHz, 900(B8)MHz, 1800(B3)MHz, 2100(B1)MHz, 2600(B7)MHz 4G TDD-LTE 1880-1920(B39)MHz, 2010-2025(B34)MHz, 2300-2400(B40)MHz, 2570-2620(B38)MHz, 2496-2690(B41)MHz 3G WCDMA 850(B5)/900(B8)/2100(B1)MHz 2G GSM 850/900/1800/1900MHz Type WCDMA, GSM, FDD-LTE, TDD-LTE WIFI 802.11a/b/g/n, 2.4GHz GPS Yes BT Yes, V4.0 Display Screen Size 3.0 inch Screen Type Capacitive Resolution 854 x 480 pixels Camera Front Camera 2MP Back Camera 5MP Video recording Yes Connectivity Ports 1 x Type C 2 x Nano SIM card or (1 x Nano SIM card + 1 x TF card) slots Battery Battery Types Undetachable, Li-polymer Battery Battery Capacity 2000mAh Dimensions & Weight Size 94 x 47.4 x 12.5mm Weight 90g Package Include Package Contents 1 x Phone 1 x Power Adapter 1 x Screen Protector 1 x Eject Pin 1 x Protective Case 1 x USB Cable Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 13cm * 7cm * 4cm / 5.12inch * 2.76inch * 1.57inch Qty per Carton 40 Carton Weight 9.50kgs / 20.94lb Carton Size 42cm * 15cm * 28cm / 16.54inch * 5.91inch * 11.02inch Loading Container 20GP: 1511 cartons * 40 pcs = 60440 pcs40HQ: 3509 cartons * 40 pcs = 140360 pcs

Lis Plus Moins

About The Product1. LINEPAUDIO A962 fancier-level HiFi Vacuum Tube Power Headphone Amplifier PreAmp, made of Beijing classic quality 6J9-J vacuum tube, USB-PC supported ASIO sound effect software will give out more professional, full, open-stage, soft and smooth sound, especially applicable to voice, string music, light music, and classical music, the performance of different frequency points is so perfect! Fine at high frequency, strong at low frequency! Easily drive 16??-600 ?? headphone of any class, quiet background without any current background noise! Two sets of audio signal inputs, one is USB signal input (USB-PC), USB cable is connected to PC, plug and play without a drive, directly used as an upscale USB external sound card. The USB port can be also connected to any model of Android mobile phones with OTG function. The other is 3.5mm interface audio signal input and you can connect it to mobile phone, CD, lossless music player or other audio source devices. In case of simultaneous inputs of USB signal and 3.5mm interface signal, 3.5mm interface signal input is preferred. 2. LINEPAUDIO A962 has three sets of audio signals, simultaneously output to meet the interface of different devices (RCA/3.5mm/6.35mm), the output end will deliver to you a real HiFi experience, whether connected to your upscale headphone or speaker, or used as a timbre adjustable PreAmp to connect your digital power amplifier, multimedia speaker or various stereo devices, what a real PreAmp. Of course, if you want to try the timbre style of different tube amplifiers, this product can fully meet your requirement, compatible with E180F, 6688 and other tube models, you may exchange at will. 3. Many music fanciers are concerned about the background noise of vacuum tube headphone amplifier, but this product frees you from this concern, its performance in controlling background noise is extraordinary, the background is quiet after several tests and optimizations of the circuit design, without any current background noise, you will hear the purest, most natural, and most nostalgic sound. As to the testing of the current background noise: as it is known to all, the current background noise comes from two sources, one is the vacuum tube headphone amplifier, the other is the audio source or the audio cable (the audio cable makes it more likely to generate background noise), the correct procedure of testing the headphone amplifier is to disconnect the audio input cable, with power on, if the background of the headphone amplifier is quiet, it indicates that the headphone amplifier has a very high SNR. If unquiet, or this seriously affects you from listening music, it indicates that the headphone amplifier has a very low SNR. 4. Notes: An electronic interference device near the desktop may also affect the SNR. For example, if the vacuum tube power amplifier is placed near a wireless router or device, it may be interfered to some extent. Enclosed by an aluminum shell, miniaturized but exquisite, the front, rear panel is precisely processed by CNC machining center, you will get a terrific handle, the ultra-small volume will not occupy your desktop space too much. More than a multi-functional upscale high-fidelity USB sound card vacuum tube headphone amplifier, it is also a beautiful desktop ornament. All letters on the machine panels are printed using expensive laser carving and will never fade off.Features1. 2 sets of signal inputs (USB-PC and 3.5mm input), 3.5mm input is preferred. 2. 3 sets of stereo signal outputs: 3.5mm / 6.35mm / RCA simultaneous signal outputs, allowing you to connect different device interfaces. 3. USB: PC Supported ASIO sound effect software (ASIO drive to be installed) 4. Input power: >=1100mW (32ohms). 5. Matched headphone impedance: 16ohms-600ohms. 6. Frequency response: 20 kHz - 30kHz. 7. Support sampling rate: 16Bit - 32k Bit, 44.1kHz, 48kHz.Specification: General Model A962 Material Metal Input Impedance 16ohms-600ohms headphone SNR > = 110dB Distortion < 0.005% Frequency Response 20 kHz - 30kHz Size 98*94*29mm Weight 398g Package Include Package Contents 1 x Amplifier 1 x AC Power Adapter Charger 1 x USB Cable Package Weight One Package Weight 0.54kgs / 1.20lb One Package Size 20cm * 18cm * 5.5cm / 7.87inch * 7.09inch * 2.17inch Qty per Carton 20 Carton Weight 10.96kgs / 24.16lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 20 pcs = 11120 pcs40HQ: 1292 cartons * 20 pcs = 25840 pcs

Lis Plus Moins

1. Input voltage/current: 9V/2A2. Phone charging output: 5W/7.5W/10W/15W max3. Charging output for Airpods: 5W max4. Charging output iWatch: 3W max5. Sensing distance: about 2-10mm6. Input interface: Type-C7. Material: liquid silicone panel, ABS8. Size: about 10 x 7.4 x 10.4cmFeatures:1. Foldable storage on both sides, easy to carry2. Support 3 devices to charge at the same time, strong magnetic attraction, charge at any time3. Intelligent adaptation of safe current, safe and fast charging4. It can be charged both horizontally and vertically, and can be used as a stand5. Smart LED light display, blue light when charging6. Multiple safety protection, overheating/anti-interference/overcurrent/short circuit/overvoltage protection7. Sensitive and can be charged even with a caseSpecification: General Certificate UL Compatible with Apple: iPhone 17 Pro, iPhone Air, iPhone 17 Pro Max, iPhone 17, iPhone 16e, iPhone 16 Pro Max, iPhone 16 Plus, iPhone 16, iPhone 16 Pro, iPhone 15, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 14 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 Pro Max, iPhone 13, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro Samsung: Galaxy F52 5G Huawei: Pura 90 Pro Max 5G, Pura 90 5G, Pura 90 Pro 5G, Mate 80 Pro Max Wind 5G, Mate 80 Pro, Mate 80, Mate 80 Pro Max, Pura 80 Ultra 5G, Pura 80 5G Honor: Magic8 Pro Air 5G, Win 5G, Magic8, Magic8 Pro, X70 5G, 300 Pro, Magic7 Pro, Magic7 Xiaomi: 17 Max 5G, 17T Pro 5G, 17 Ultra, Redmi K90 Pro Max, 17 Pro Max, 17, 17 Pro, 15T Pro 5G, Mix Flip 2, 15S Pro, 15 Ultra, Redmi K80 Pro, 15, 15 Pro OPPO: Find X9 Ultra 5G, Find X9, Find X9 Pro, Reno14 Pro (China), Find X8 Ultra, Find X8s, Reno13 Pro (China), Find X8, Find X8 Pro OnePlus: 15T, 15, 13 Vivo: iQOO 15 Ultra 5G, S50 Pro mini 5G, iQOO 15, X300, X300 Pro, X Fold5, X200s, X200 Ultra, X200 Pro mini, X200 Pro Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 9cm * 13cm / 5.51inch * 3.54inch * 5.12inch Qty per Carton 50 Carton Weight 15.00kgs / 33.07lb Carton Size 55cm * 42cm * 25cm / 21.65inch * 16.54inch * 9.84inch Loading Container 20GP: 461 cartons * 50 pcs = 23050 pcs40HQ: 1071 cartons * 50 pcs = 53550 pcs

Lis Plus Moins