Résultats de la recherche pour "Cover Micro USB Cable"

Features1. Compact and lightweight design, convenient to carry. 2. Adopt environmental protection ABS material without any odor. 3. It is a tough, water-resistant polycarbonate case made to carry and store memory cards. 4. Convex design on the case makes card media case more ergonomic and more comfortable. 5. The case adopts a compact design, the two compartments both allow you store 1Standard SIM + 2Micro-SIM + 2Nano-SIM + 3CF + 7SD + 6TF + 1CARD PIN. 6. The case with a micro USB 3.0 port, can as a card reader for reading TF / CF / SD card, read speed up to 5Gbps. 7. The blue water-resistant TPV material seal keeps unwanted debris and water from entering the case. 8. Package list: - Card reader storage card box x 1 - Card pin x 1 - Type-C data cable x 1 - Color package box x 1 9. Note: The cards are not included.How To Read Card1. Open positive the left side blue soft rubber seal. 2. Open the card case, put the card in the card slot, then close the cover. 3. Use the data cable to plug into the read card box tail USB port. 4. Use the corresponding match data transmission port to connect the corresponding devices which support OTG protocol. Notes 1. The card reading function of this product only supports devices with OTG function, and support iOS phones with OTG function. 2. Some OTG devices require manual turning on OTG in the smartphone settings. 3. OTG function does not support 64GB or higher cards.Q&A1. Q: MicroSD and SD card, how much capacity can it read? And whether it can read SDXC card? - A: MicroSD and SD card, it can read up to 128GB on PC, but read up to 64GB when connecting OTG phones. It can read SDXC card. 2. Q: CF and SD card (or MicroSD) can not read at the same time, when the second card plug in, the first card can not work. - A: Yes, it can not read two card or more at the same time. 3. Q: I tried 8GB, 32GB microSD card, can not identify. But I put the microSD card into the microSD card adapter, then intert this product, it can read the card, why? - A: First, you can try to change another card or re-pull out the microSD card and insert the card reader again. The second reason is that related to the data cable. Or the card maybe plug in the opposite direction.Specification: General Material ABS, PC, TPV Storage Capacity 1Standard SIM + 2Micro-SIM + 2Nano-SIM + 3CF + 7SD + 6TF (not included) Functions Card reader, storage box Read Card TF / CF / SD USB Type 3.0 Cable Length 40cm / 15.6inch Size 11.5*7.0*2.05cm / 4.49*2.73*0.80inch Weight 118g / 0.26lb Package Include Package Contents Card Case x 1 Card Pin x 1 3 in 1 USB Cable: USB 3.0 + micro USB 2.0 + Type-C to micro USB 3.0 x 1 Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 21cm * 11cm * 3cm / 8.27inch * 4.33inch * 1.18inch Qty per Carton 39 Carton Weight 7.50kgs / 16.53lb Carton Size 41cm * 32cm * 25cm / 16.14inch * 12.6inch * 9.84inch Loading Container 20GP: 813 cartons * 39 pcs = 31707 pcs40HQ: 1887 cartons * 39 pcs = 73593 pcs

Lis Plus Moins

1. Support Bluetooth, receiver, wired three modes connection2. Three detachable magnetic covers, easy to load and unload, support a variety of combinations3. Silicone grip, fit the palm curve, more comfortable to hold4. Support wireless connection of receiver to PC platform, wired connection to Xbox host and bluetooth wireless connection to Android phone and tablet box to play native games5. Independent joystick ADC sampling chip, ultra-high sampling accuracy and sampling rate6. Hall trigger, support switching between Hall linear and micro-switch7. Adopt 5 million life micro-switch ABXY mechanical buttons, crisp touch8. Built-in 1200mAh battery capacity, standard TypeC USB interface, equipped with 3m data cable, long-lasting battery life9. Wireless audio function, support wired and receiver mode10. Intelligent start-stop charging base, easy to use11. Size: 152x103x58mm12. Weight: 274g for single gamepad, 118g for baseSpecification: Package Weight One Package Weight 0.65kgs / 1.44lb One Package Size 20cm * 18cm * 10cm / 7.87inch * 7.09inch * 3.94inch Qty per Carton 20 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 40cm * 36cm / 20.47inch * 15.75inch * 14.17inch Loading Container 20GP: 356 cartons * 20 pcs = 7120 pcs40HQ: 826 cartons * 20 pcs = 16520 pcs

Lis Plus Moins

Features: 1. The shoulder strap is detachable, and the length can be adjusted freely, the length can be about 110cm 2. The mesh cover protects the speaker from water, dust, vibration 3. IPX5 waterproof, dustproof and shockproof 4. Cylindrical shape and built-in left and right channels provide 360-degree stereo effect 5. Hands-free calling function, noise-cancelling microphone, allowing you to answer calls without touching your phone 6. FM function allows you to listen to the radio freely 7. Support TF card, Micro SD card and U disk (not included) 8. Support AUX 9. TWS function, you can connect two speakers to sync with one phone. 10. Simple button control, you can press the button to turn on/off, play/pause, switch modes, skip songs, adjust volume, etc. 11. Bluetooth V5.1, compatible with all Bluetooth devices, wireless distance up to 10m 12. Built-in 3.7V 1500mAh lithium battery, normal volume playback time is about 3 hours Product Specifications: 1. SNR: greater than or equal to 90dB 2. Speaker Driver: Diameter 57mm x 2 3. Power: 4 ohms/5W x 2 4. Frequency response: 120Hz-20KHz 5. Dimensions: 224.2x95x100mm 6. Charging input: 5V/1A 7. Charging time: about 3 hours 8. Weight: about 638g Packing list: Bluetooth speaker x 1 Micro USB charging cable x 1 AUX cable x 1 Shoulder strap x 1 User Manual x 1Specification: Package Weight One Package Weight 0.82kgs / 1.80lb One Package Size 24cm * 13cm * 14cm / 9.45inch * 5.12inch * 5.51inch Qty per Carton 18 Carton Weight 15.30kgs / 33.73lb Carton Size 50cm * 41cm * 44cm / 19.69inch * 16.14inch * 17.32inch Loading Container 20GP: 295 cartons * 18 pcs = 5310 pcs40HQ: 686 cartons * 18 pcs = 12348 pcs

Lis Plus Moins

Features1. The camera will be triggered in 0.3s without delay. Never miss any exciting moments even at night. 2. Excellent sensitivity night vision with 3 PIR LED, with 36pcs no-glow LEDs, 940nm invisible infrared technology, making the cover more cool and private. Never miss anything or any corner with 120 degree wide angle lens. 3. Full HD 1080P video max 16MP Photo, the trail hunting camera captures 5 mega pixel clear images and full HD 1080P videos, upgraded and advanced chip makes photos videos more clear and detailed during daytime (black and white at night). 4. Support TF card to 32GB (not included). 5. This trail camera features an operating temperature range of -20 degree C to 70 degree C within high quality material, strap on the back is enough sturdy to tied to the tree, the wildlife camera also has a threaded slot on the bottom for a slate river mount. 6. Wider occasions, hunting / home security / property surveillance / wildlife monitoring and farm security. Up to 6 months in standby mode, nighttime power consumption is much more than daytime power consumption, recommended using 8 new and good quality alkaline AA batteries to last more lifetime.Specifications1. Model: HC801A 2. Photo pixel: 16 million 3. Display: 2.0 inch TFT 4. Memory: Micro SD card to 32GB(not included) 5. Infrared light: 36pcs, can shoot 15 meters 6. Image sensor: 8 megapixel color CMOS 7. Video resolution: 1920x1080/30fps(FHD) 8.Waterproof: IP65 9. Set camera ID: Support 10. Set time interval: Support 11. Timed photo or video: Support 12. Shooting numbers: 1~3 13. Trigger speed: 0.3 second 14. PIR sensing angle: 110 degrees 15. Lens angle: 120 degrees 16. Date, time, temperature and water mark can be stamped in the pictures or videos 17. Package List - Host x 1 - User manual x 1 - Bandage x 1 - USB cable x 1Package List1. Host x 1 2. User manual x 1 3. AV cable x 1 4. USB cable x 1Specification: Package Weight One Package Weight 0.51kgs / 1.13lb One Package Size 18cm * 15cm * 10cm / 7.09inch * 5.91inch * 3.94inch Qty per Carton 20 Carton Weight 11.40kgs / 25.13lb Carton Size 52cm * 37cm * 30cm / 20.47inch * 14.57inch * 11.81inch Loading Container 20GP: 462 cartons * 20 pcs = 9240 pcs40HQ: 1072 cartons * 20 pcs = 21440 pcs

Lis Plus Moins

Parameter:1. Focal length range: front 170 degrees and rear 120 degrees2. Display: 4.0 inch IPS screen3. Lens: 170 degree viewing angle glass lens4. Lens aperture: F2.0 aperture5. Front camera: 1920x1080P, 1280x720P6. Rear camera: 720x480P7. Loop recording (loop recording): Off / 1 minute / 2 minutes / 3 minutes / 5 minutes8. Video format: MPEG-49. Audio: Built-in MIC and speaker10. Gravity sensor (gravity sensor): built-in11. PC interface: USB2.012. Rear camera cable length: 5.5m / 18 feet13. Power interface: 5V / 1.5A14. Built-in battery: 450 mA15. Languages: English, Chinese, French, German, Italian, Spanish, Japanese, Russian, Portuguese, Korean16. Support up to 32GB Micro SD (not included)17. Dimensions: 84x48x10 mm18. Weight: 455 gramsFeatures:1. Built-in gravity sensor, when an emergency brake or collision occurs, the collision video is kept separately, and the loop recording will not cover it, and the scene of the accident can be restored2. Mobile monitoring, retaining evidence3. 150 degree wide angle, wide field of view coveragePacking list:- Car DVR video recorder x 1- Rear view camera x 1- Rear connection cable x 1- Car charger with USB port x 1- Bracket x 1- User manual x 1Specification: Package Weight One Package Weight 0.42kgs / 0.92lb One Package Size 13cm * 8cm * 5cm / 5.12inch * 3.15inch * 1.97inch Qty per Carton 50 Carton Weight 21.20kgs / 46.74lb Carton Size 47cm * 29cm * 18cm / 18.5inch * 11.42inch * 7.09inch Loading Container 20GP: 1086 cartons * 50 pcs = 54300 pcs40HQ: 2523 cartons * 50 pcs = 126150 pcs

Lis Plus Moins

Product features:1. Removable and adjustable portable shoulder strap up to 120 cm.2. The filter cover is used for waterproof, dustproof and shockproof.3. Waterproof, dustproof and shockproof.4. 5W high power, two bass diaphragms on both sides, vibrate when playing music.5. Cylindrical and built-in left and right channels provide 360-degree stereo vision.6. Call function, eliminate noise microphone, so that you can answer the phone without holding the phone.7. FM radio allows you to listen to the radio freely.8. Support MP3, WMA, WAV, FLAC, APE format music files.9. Support 32GB TF card or Misro SD card, support USB 2.0 disk.10. Support external MP3 / MP4 / computer and other audio input functions (AUX).11. TWS function, you can connect two speakers to synchronize with one phone.12. Simple button control, you can press the button to turn on/off, play/pause, switch modes, skip songs, adjust volume, etc.13. Bluetooth 5.0, compatible with all Bluetooth devices.14. IOS battery display, you can see the speaker with reminder function on iPhone.15. The 500mAh battery can play for 6 hours at 2/3 volume when fully charged.16. It is not only a Bluetooth speaker, but also a radio, wired speaker, and subwoofer.Product Specifications:1. Bluetooth version: V5.02. Battery capacity: 500mAh3. Life time: 6 hours4. Charging time: 1-2 hours5. Speaker power: 5Wx26. Frequency range: 2.4GHz7. Sensitivity: 400mv8. Wireless transmission distance: 10m9. Frequency response: 70-20KHz10. Play format: WAV, MP3, WMA, FLAC, APE11. TF card support: up to 32GB (not included)12. Input voltage: DC 5V 2A13. Interface type: Micro USB / AUX / TF card socket / USB 2.014. Material: rubber + woven cloth15. Dimensions: 142 x 83 x 86mmPacking list:Bluetooth speaker x 1Charging cable x 1Audio cable x 1Shoulder strap x 1Manual x 1Specification: General Certificate CE, ROHS Package Weight One Package Weight 0.47kgs / 1.04lb One Package Size 17cm * 8cm * 10cm / 6.69inch * 3.15inch * 3.94inch Qty per Carton 50 Carton Weight 24.30kgs / 53.57lb Carton Size 45cm * 36cm * 50cm / 17.72inch * 14.17inch * 19.69inch Loading Container 20GP: 329 cartons * 50 pcs = 16450 pcs40HQ: 764 cartons * 50 pcs = 38200 pcs

Lis Plus Moins

Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lis Plus Moins

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lis Plus Moins

Features1. MTK6580A quad-core processor, good performance, equipped with 1GB+8GB memory, running fast and smooth. 2. 6.1-inch 1010 x 480 pixel HD+ screen, small body, wide viewing angle. 3. 2.0MP front camera, 2.0MP rear camera, take high-definition photos. 4. Support face recognition, support WIFI+BT+FM+GPS, Micro USB charging interface. 5. 2350mAh large-capacity battery power supply, long standby and use time.Attention1. Due to the difference in light, the actual color of the phone may be slightly different from the screen and the picture. Color names are only used to distinguish between individual SKUs. Please understand that. Thank you. 2. The battery capacity is typical of the factory laboratory, the specific charging speed, the length of use and other data, the actual situation will be slightly different due to the power cord, power adapter, ambient temperature. When the phone is completely out of power and automatically shuts down, you need to charge your phone for more than 10 minutes to boot. It is recommended to charge when the battery is less than 20% charged. 3. Available memory capacity is subject to preloaded software 4. Product images and models, data, functions, performance, specifications, etc. are for reference only.We may improve the above contents. For details, please refer to the product and product description. Unless otherwise stated, the data contained in this website are our internal test results, and the comparisons are compared with our products. 5. The mobile phone does not support the telecom CDMA 2G / 3G network.Specification: Network Operator (Parts of Countries) France Bouygues 3G, SFR 3G, Orange 3G, Free 3G UK 3 3G, Orange 3G, Vodafone 3G, O2 3G Italy 3 3G, Vodafone 3G, TIM 3G Spain Movistar 3G, Orange 3G, Vodafone 3G, Yoigo 3G Russia MTS 3G, MegaFon 3G, Beeline 3G Japan NTT DoCoMo 3G, SoftBank 3G General Model S23 Ultra N88 Central Processing Unit(CPU) MTK6580A Quad Core Shell Material AG glass back cover SIM Quantity Dual SIM OS System Android 9.0 RAM 1GB ROM 8GB External memory TF card up to 128GB (not included) Sensor G-sensor Support Language Arabic, Bulgarian, Burmese, Czech, Dutch, Croatian, Catalan, French, English, Finnish, Filipino, Greek, German, Hindi, Hungarian, Hebrew, Indonesian, Italian, Japanese, Khmer, Latvian, Norwegian, Persian, Portuguese, Polish, Russian, Romanian, Serbian, Swedish, Spanish, Turkish, Thai, UKrainian, Vietnamese, Simple Chinese, Traditional Chinese, Kazakh, Urdu, Armenian, Laotian, Estonian, Lithuanian, Slovak, Slovenian Additional Features Face unlock,FM Network 3G WCDMA 850/1900/2100MHz 2G GSM 850/900/1800/1900MHz Type WCDMA, GSM WIFI Yes GPS Yes BT Yes, V4.0 Display Screen Size 6.1 inch Screen Type IPS, Capacitive Resolution 1010 x 480 pixels Multi-Touch Multi-point Camera Camera Quantity Dual Front Camera 2MP FF Beauty Function Yes Back Camera 2MP AF Rear Flashlight Yes Aperture Back: F1.8, Front: F2.0 Video recording Yes Connectivity Ports 1 x Micro USB 2 x Nano SIM card or (1 x Nano SIM card + 1 x TF card) slots Battery Battery Types Undetachable Battery Capacity 2350mAh Quick Charge No Package Include Package Contents 1 x Phone 1 x Power Adapter 1 x Earphone 1 x User Manual 1 x Screen Protector 1 x Eject Pin 1 x S Pen 1 x Protective Case 1 x USB Cable Package Weight One Package Weight 0.48kgs / 1.06lb One Package Size 19cm * 10cm * 5cm / 7.48inch * 3.94inch * 1.97inch Qty per Carton 20 Carton Weight 9.20kgs / 20.28lb Carton Size 40cm * 27cm * 11cm / 15.75inch * 10.63inch * 4.33inch Loading Container 20GP: 2244 cartons * 20 pcs = 44880 pcs40HQ: 5210 cartons * 20 pcs = 104200 pcs

Lis Plus Moins

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Lis Plus Moins

Tripod Mount1. Made of high quality aluminum leg tube and plastic 3-way head, foldable and portable. 2. Compact the tripod legs can be folded, making it small enough to carry just about anywhere. 3. Three leg angle positions provide flexibility and enable shooting in cramped quarters or on irregular surface areas. 4. Adjust the height of the tripod by adjusting the center axis to meet different shooting concepts. 5. Adjustable height: 38.5-127cm. 6. Suitable for mobile phones, tablets, sports cameras, DV cameras, card machines or micro-singles.Dual Phone Bracket1. Smartphone live broadcast bracket, made of high quality material, portable and lightweight. 2. The phone holders are removable, and support horizontal and vertical usage. 3. You can adjust the angle of phone clamp, more convenient and flexible. 4. With 1/4 inch screw hole, can be installed to tripods with 1/4 inch screw of any device. 5. Multi-purpose live broadcast bracket, selfie bracket, live online, video shooting, share your life with your relatives and friends anytime and anywhere.Ring LED Light1. LED ring light can be mounted on the holder and take it anywhere, it can also be removed from the stand at any time, the tripod ball head can 360 degree rotating can free to adjust to any angle. 2. The ring light is made of 2x36pcs energy-saving LED beads, it heat dissipation is excellent, constant current drive and high color rendering, soften the light source and enhance skin tone in portraits photography. 4. 3 colors lighting mode adjustable brightness for your choose, you can adjust the color and brightness very easily, good brightness can be achieved without installing extra colorful filters. Three colors of soft natural light illuminate your beauty in different occasions. 5. The USB ports can be used with multiple devices, such as connect computer host, laptop, mobile power and USB charger. You will be able to enjoy LED ring light at any time free. 6. Lightweight and portable design: Convenient to use and carry when you traveling or working outdoor etc. 7. Extensive application: It is widely applied to outdoor photo light, filling light indoors, portrait, fashion, advertisement photography, shooting video etc.Ring LED Specifications1. Number of beads: 2x36pcs 2. Lamp bead model: 2835 3. Lamp brightness: 24-26lm 4. White light color temperature: 6500K 5. Warm white color temperature: 3200K 6. Power: 0.36-7W 7. Voltage: 5V 8. Indicates: Ra>90 9. Dimming range: 1%-100% 10. Shell material: ABS, Acrylic light cover 11. Dimensions: outer diameter 160mm. inner diameter 110mm 12. Power supply: USB port power supply 13. Cable length: 2mPackage List1. Tripod Mount x 1 2. Dual Phone Bracket x 1 3. 6.2 inch LED Ring light 4. Tripod Ball Head x 1 5. USB Cable Wire Control x 1 6. Carrying Bag x 1 7. Color Package Box x 1Specification: Package Include Package Contents Ring LED Light x 1 Tripod Holder x 1 Tripod Ball Head x 1 USB Cable Wire Control x 1 Dual Phone Bracket x 1 Color Package Box x 1 Carrying Bag x 1 Package Weight One Package Weight 1.09kgs / 2.41lb One Package Size 47cm * 30cm * 9cm / 18.5inch * 11.81inch * 3.54inch Qty per Carton 10 Carton Weight 14.50kgs / 31.97lb Carton Size 62cm * 47cm * 50cm / 24.41inch * 18.5inch * 19.69inch Loading Container 20GP: 183 cartons * 10 pcs = 1830 pcs40HQ: 424 cartons * 10 pcs = 4240 pcs

Lis Plus Moins

Features1. Ultra slim and lightweight body. 2. MTK6637 quad core up to 1.1GHz CPU. 3. 3.46 inch screen, 800x340px FWVGA resolution display. 4. 2 million front camera, 5 million rear camera (with auto focus), capture the wonderful moment, take clear pictures. 5. Built-in 1100mAh battery, the battery will make the phone last for several days in normal use.Network1. 2G network frequency: - GSM: B3/B5/B8(1800/850/900)MHz 2. 3G network frequency: - WCDMA: B1/B5/B8(2100/850/900)MHz 3. 4G network frequency: - FDD-LTE: B1/B3/B5/B7/B8/B20(2100/1800/850/2600/900/800)MHz - TDD-LTE: B39/B40(1900/2300)MHzSpecification: Network Operator (Parts of Countries) France Bouygues 3G, SFR 3G, Orange 3G, Free 3G, Bouygues 4G, SFR 4G, Orange 4G, Free 4G UK 3 3G, Orange 3G, T-Mobile 3G, Vodafone 3G, O2 3G, 3 4G, EE 4G, Vodafone 4G, O2 4G Italy 3 3G, Vodafone 3G, TIM 3G, Vodafone 4G, TIM 4G, Wind Tre 4G Spain Movistar 3G, Orange 3G, Vodafone 3G, Yoigo 3G, Movistar 4G, Orange 4G, Vodafone 4G, Yoigo 4G Russia MTS 3G, MegaFon 3G, Beeline 3G, VimpelCom (Beeline) 4G, MTS 4G, MegaFon 4G, Motiv 4G, Tele2 (Rostelecom) 4G, Vainakh Telecom 4G, Tattelecom 4G Japan NTT DoCoMo 3G, SoftBank 3G, NTT DoCoMo 4G, SoftBank 4G, KDDI 4G General Model X60 Central Processing Unit(CPU) MTK6737 Quad Core up to 1.1GHz Shell Material Middle frame zinc alloy, back cover tempered glass SIM Quantity Dual SIM SIM Types Nano SIM Card OS System Android 6.0 RAM 3GB ROM 64GB External memory TF card up to 128GB (not included) Sensor G-sensor, Ambient Light sensor, Proximity sensor Support Language Arabic, Bulgarian, Burmese, Czech, English, French, Filipino, Greek, German, Hebrew, Indonesian, Italian, Japanese, Khmer, Malay, Persian, Portuguese, Russian, Romanian, Spanish, Turkish, Thai, Vietnamese Additional Features Infrared Face unlock, FM Network 4G FDD-LTE 800(B20)MHz, 850(B5)MHz, 900(B8)MHz, 1800(B3)MHz, 2100(B1)MHz, 2600(B7)MHz 4G TDD-LTE 1880-1920(B39)MHz, 2300-2400(B40)MHz 3G WCDMA 850(B5)/900(B8)/2100(B1)MHz 2G GSM 850(B5)/900(B8)/1800(B3)MHz Type WCDMA, GSM, FDD-LTE, TDD-LTE WIFI 802.11a/b/g/n 2.4GHz GPS Yes BT Yes, V4.0 Display Screen Size 3.46 inch Screen Type Capacitive, FWVGA Resolution 800 x 340 pixels Camera Camera Quantity Dual Front Camera 2MP Back Camera 5MP AF Video recording Yes Connectivity Ports 1 x Micro USB 2 x Nano SIM card or (1 x Nano SIM card + 1 x TF card) slots Battery Battery Types Undetachable Battery Capacity 1100mAh Dimensions & Weight Size 100.4 x 46 x 10mm Weight 110g Package Include Package Contents 1 x Phone 1 x User Manual 1 x Eject Pin 1 x USB Cable Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 14cm * 9cm * 4cm / 5.51inch * 3.54inch * 1.57inch Qty per Carton 40 Carton Weight 9.50kgs / 20.94lb Carton Size 42cm * 18cm * 28cm / 16.54inch * 7.09inch * 11.02inch Loading Container 20GP: 1259 cartons * 40 pcs = 50360 pcs40HQ: 2924 cartons * 40 pcs = 116960 pcs

Lis Plus Moins