-
FURTHER INFO
-
CUSTOMER SERVICE
-
SHOPPING GUIDE
-
CUSTOMER SUPPORT
Mira Sales 96 Parkers Walk, Newmarket England CB8 7AP United Kingdom
Available between 9AM to 5PM. Ready to answer your questions. Live Chat Support Available.
LCD & LED Display Module
-
Waveshare 1080x1080 IPS Optically Bonded 5-Inch HDMI Circular 10-Point Touch Screen
1. 10-point touch, depending on the operating system 2. Tempered glass panel with up to 6H hardness 3. Optically bonded, good display, dustproof 4. IPS display panel, 160-degree wide viewing angle display performance is excellent 5. Support Raspberry Pi operating system, Ubuntu / Kali / WIN10 IoT, Retropie, driver-free 6. Device and system support: Jason Nano, Ubuntu, driver-free7. Support Windows 11 / 10 / 8.1 / 8 / 7, driver-free 8. Weight: 0.381 kg Packing list: 5 inch 1080x1080 LCD screen x 1 HDMI Flat Cable 1m x 1 USB-A to USB-C Cable 1m x 1 USB to Type-C adapter (B) x 1 USB to Type-C adapter (C) x 1 HDMI to Micro HDMI Adapter x 1 HDMI adapter x 1 Screw bag x 1Specification: Package Weight One Package Weight 0.39kgs / 0.85lb One Package Size 20cm * 20cm * 6cm / 7.87inch * 7.87inch * 2.36inch Qty per Carton 78 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 78 pcs = 13806 pcs40HQ: 412 cartons * 78 pcs = 32136 pcs
£103.99
-
Waveshare SIM7600G-H M.2 4G HAT LTE CAT4 High Speed GNSS Global Band Module for Raspberry Pi
Features1. This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high speed LTE CAT4 global band connection. By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable 4G high speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. 2. Support dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on 3. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position 10. Onboard audio jack and audio decoder, allows audio operation like making phone call 11. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 2. LTE-TDD: B34, B38, B39, B40, B41 3. 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 4. 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz GNSS: 1. Satellite systems: GPS, Beidou, GLONASS, GALILEO, QZSS 2. Receiver type: - 16-channel - C/A Code 3. Sensitivity: - -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) - Cold starts: -148 dBm 4. Time-To-First-Fix (open air): - Cold starts: Less than 35s - Hot starts: Less than 1s SMS and Audio 1. SMS: - Supported types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature: - Support echo cancellation - Support noise reductionPackage List1. M.2 TO 4G/5G HAT x 1 2. SIM7600G-H-M.2 x 1 3. Antenna 2pcs x 1 4. IPEX adapter cable 2pcs x 1 5. 2*20PIN pin header x 1 6. Passive GPS antenna x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 2pcs x 1 11. Screws pack x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 9.80kgs / 21.61lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs
£59.99
-
Waveshare Compute Module Dual Gigabit Ethernet Base Board for Raspberry Pi CM4
1. CM4 socket: Suitable for all variants of Compute Module 4 2. Ethernet: Dual Gigabit Ethernet RJ45 3. USB: USB 3.2 Gen1 x 3 4. PIN header: 40PIN GPIO header x 1 5. HD media interface: HD-MI x 2, supports 4K 30fps output 6. DSI display: MIPI DSI display port x 1, 15pin 1.0mm FPC connector 7. CSI camera: MIPI CSI-2 camera port x 2, 15pin 1.0mm FPC connector 8. Power input: 7V-36V 9. FAN: 5V/12V, allows speed adjustment and measurement 10. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variantsSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.80kgs / 39.24lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£40.99
-
Waveshare 3.4 inch DSI Round Touch Display, 800 × 800, IPS, 10-Point Touch
1. Resolution: 800 × 8002. Display interface: DSI3. Display panel: IPS4. Viewing angle: 170 degrees5. Touch type: capacitive touch6. Touch points: ten-point touch7. Touch interface: I2C8. Touch panel: tempered glass panel9. Touch panel process: full lamination10. Application scenarios: smart home, automotive equipment, consumer electronics, industrial equipment, etc.11. Screen size: about 3.4 inches12. Size ：approx. 11.5 x 1.7cmFeatures:1. IPS display panel with good display performance and wide viewing angle up to 170 degrees2. Can support 10-point touch, the actual number of touch points with the software system3. Tempered glass panel, hardness up to 6H4. Screen full lamination, good display, dustproof5. Backlight brightness can be adjusted by software6. Support Raspberry Pi OS, ten-point touch, need to install the driver7. Support Pi 4B/3B+/3A+, some CM3/3+/4 expansion boards need to purchase additional adapter cableSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 13cm * 13cm * 2cm / 5.12inch * 5.12inch * 0.79inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs
£64.99
-
Lead- Acid Lithium Battery Universal LED Voltage And Electricity Display Board
1. Working current: less than 10mA2. Display mode: LED indicator3. Refresh speed: 500ms/time4. Operating voltage: DC5V-30V5. Adopt international standard size, easy to install6. The first time the product is powered on, the default voltage is 3 series of lithium ternary batteries7. In the normal display state, such as no operation within 10 seconds of the key, the product automatically shut down the display and enter the low-power, you can also manually short press the key to turn off the display into the low-power8. When the product is off, short press the button to turn on and display the power consumption9. Size: 46 x 15 x 3mmAttention:1. Please do not exceed the operating voltage, exceeding the operating voltage will damage the product2. Do not use the product outdoors, the product is not waterproofSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 4cm * 3cm / 3.15inch * 1.57inch * 1.18inch Qty per Carton 570 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 570 pcs = 234840 pcs40HQ: 958 cartons * 570 pcs = 546060 pcs
£2.99 £0.99
-
WAVESHARE 7inch HDMI LCD (H) IPS 1024x600 Capacitive Touch Screen with Toughened Glass Cover, Supports Multi mini-PCs Multi Systems
1. 7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920 x1080)2. Toughened glass capacitive touch panel, 6H hardness3. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers4. When works with Raspberry Pi, supports Raspbian, Ubuntu, -WIN10 IOT, single touch, and driver free5. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.7. 3.5mm audio jack, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)9. High quality PC case, optional tilt angle: 30?°/50?°Specification: Package Weight One Package Weight 0.43kgs / 0.95lb One Package Size 25cm * 15cm * 7cm / 9.84inch * 5.91inch * 2.76inch Qty per Carton 20 Carton Weight 8.60kgs / 18.96lb Carton Size 50cm * 30cm * 35cm / 19.69inch * 11.81inch * 13.78inch Loading Container 20GP: 507 cartons * 20 pcs = 10140 pcs40HQ: 1179 cartons * 20 pcs = 23580 pcs
£43.99
-
Lily Pi ESP32 Chip WiFi Bluetooth 3.5 Inch Capacitive Touch Screen 5V Relay USB Expansion Port
1. The design and modification are based on the shape and structure of the for Raspberry Pi. The appearance is similar to the structure of the for Raspberry Pi motherboard. The 2 x 20 expansion ports next to it have reserved pins that match the for Raspberry Pi GPIO.2. For Raspberry Pi expansion board3. TF card holder, self-elastic card holder, easy to pull out the card4. Chip: ESP32-WAROVER5. Relay: HFD3 5V 2A6. RTC: PCF85637. Type-c input: 5V8. Purpose: IoT programming development9. Power: 0.5W10. Rated voltage: 5v11. DC-DC input: 5-12V12. Extension pin header: 2.54 2 x 2013. Double-layer USB interface: I2C/UART function respectively14. Double-layer USB expansion port: output 5V/1A15. Button: RST button, custom button16. USB output: 5V 1A17. Dimensions: 99.7 x 62.5 x 31.2mmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs
£39.99
-
WAVESHARE 7 inch HDMI LCD (H) IPS 1024x600 Capacitive Touch Screen, 7 inch
1. IPS screen, 1024x600 hardware resolution, configurable by software (up to 1920x1080)2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers3. When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free4. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free5. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.3. 3.5mm audio jack, speaker connector, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 22cm * 15cm * 10cm / 8.66inch * 5.91inch * 3.94inch Qty per Carton 16 Carton Weight 5.70kgs / 12.57lb Carton Size 44cm * 30cm * 40cm / 17.32inch * 11.81inch * 15.75inch Loading Container 20GP: 505 cartons * 16 pcs = 8080 pcs40HQ: 1172 cartons * 16 pcs = 18752 pcs
£34.99
-
Waveshare Compute Module IO Board Plus for Raspberry Pi CM3 / CM3L / CM3+ / CM3+L, For Raspberry Pi CM3
OverviewThe Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components.Compute Module IO Board Plus Features1. Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation2. Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs3. Arduino connectivity, also supports Arduino shields4. 1-WIRE interface, for connecting single-bus devices like DS18B205. 4x keys, 4x LEDs, 1x Buzzer, for I/O testing6. Onboard USB HUB, allows connecting more USB devices7. IR receiver, IR remote control is available8. Onboard USB TO UART, for serial debugging9. Sensor interface10. 10-bit ADC, 38KSPS, 11-ch (6-ch for Arduino interface, 5-ch for sensors)11. 16-bit DAC, 2-ch12. Onboard RTC, one of the most common and useful functionsWhat is on the Compute Module IO Board Plus1. Compute Module interface: for connecting Compute Module (CM3 / CM3L / CM3+ / CM3+L)2. Compute Module GPIO header: breakout all the Compute Module pins3. Raspberry Pi GPIO header: for connecting Raspberry Pi HATs4. CSI interface: camera ports, for connecting Raspberry Pi Camera5. DSI interface: display ports, for connecting Raspberry Pi LCD6. HDMI port7. USB ports: for connecting USB devices8. USB SLAVE interface: allows you to burn system image in to Compute Module 39. USB TO UART interface: for serial debugging10. Arduino header: for connecting Arduino shields11. AD/DA input/output screw terminals12. 1-WIRE interface: for connecting single-bus devices like DS18B2013. Sensor interface14. Power port: 5V 2.5A15. FE1.1S: USB HUB chip16. 12MHz crystal17. CP2102: USB TO UART converter18. Micro SD card slot: Insert a Micro SD card with pre-burnt system, to start up Compute Module 3 Lite19. TLC1543: AD converter20. DAC8552: 16-bit DAC, 2-ch21. DS3231: High-precision RTC chip, I2C interface22. RTC battery holder: supports CR1220 batteries23. Voltage regulator: 3.3V / 2.5V / 1.8V 24. LFN0038K: IR receiver25. Buzzer26. Power indicator27. ACT indicator: indicating the Micro SD card status28. User LEDs29. User Keys30. BOOT selection- EN: enable the PC to access SD card/eMMC through USB SLAVE- DIS: the Compute Module will boot from SD card/eMMC31. VGx power selection: config the I/O level32. USB HUB enable jumper: HUB enable and USB SLAVE power selection33. ADC/DAC configuration: config the power supply and reference voltage of ADC/DAC34. Peripheral configuration: config the control pins of UART, user keys, user LEDs, 1-WIRE interface, IR receiver, and buzzer35. Arduino AD selection- Connect 1 and 2: Arduino A0-A5 as digital control pin- Connect 2 and 3: Arduino A0-A5 as AD inputSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 16cm * 10cm * 4cm / 6.3inch * 3.94inch * 1.57inch Qty per Carton 120 Carton Weight 15.00kgs / 33.07lb Carton Size 48cm * 40cm * 40cm / 18.9inch * 15.75inch * 15.75inch Loading Container 20GP: 347 cartons * 120 pcs = 41640 pcs40HQ: 806 cartons * 120 pcs = 96720 pcs
£49.99
-
Waveshare Infrared Proximity Sensor, Obstacle-Avoiding
OverviewEmitting a beam of infrared, and receive the reflected beamFeatures wide range voltage comparator LM393Adjustable sensitivitySignal output indicatorSpecificationsPower: 3.3V ~ 5VDimension: 39mm × 15.5mm (include the IR LED)Mounting holes size: 3mmDetection range: 2cm ~ 30cm (depending on the obstacles color, farthest for white)Detection angle: 35°Recommended environment: in door, to avoid the sunshine effectApplicationsRobot path trackingObstacle-avoiding carPipeline counterHow to UseIn the case of working with a MCU:VCC ? 3.3V ~ 5VGND ? GNDAOUT ? MCU.IO (analog output)DOUT ? MCU.IO (digital output)Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 3cm * 2cm / 3.15inch * 1.18inch * 0.79inch Qty per Carton 1820 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 39cm * 40cm / 22.05inch * 15.35inch * 15.75inch Loading Container 20GP: 305 cartons * 1820 pcs = 555100 pcs40HQ: 708 cartons * 1820 pcs = 1288560 pcs
£2.99
-
DSO138 Oscilloscope (Full Assembled)
Features:1. This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.2. Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.3. Adjustable vertical displacement, and with instructions.4. With automatic, regular and one-shot modes, easy to capture the moment waveform.5. Available rising or falling edge trigger.6. Observable previous trigger waveform (negative delay).7. Can freeze at any time waveform display (HOLD function).8. Come 1Hz /3.3V square wave test signal source.9. With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.10. Waveform storage function: will not lose the waveform after power off.11. Short-circuit and open-circuit detection: can help the user find out the soldering error.12. TFT controller recognition function. Note:This DIY kit is soldered. Specifications:1. Maximum Real-time Sampling Rate: 1Msps2. Accuracy: 12Bit3. Sampling Buffer Depth: 1024 bytes4. Analog Bandwidth: 0-200KHz5. Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)6. Input Impedance: 1Mohm7. Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)8. Coupling Modes: DC / AC / GND9. The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)10. Supply Voltage: DC 9V11. PCB Size: 117 * 76mm / 4.6 * 3in12. Screen Size: 52 * 40mm / 2 * 1.57in Package List:- 1 * DSO138 soldered Oscilloscope Kit- Soldering- 1 * Probe- 3 * User Manual(English)Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 20cm * 13cm * 3cm / 7.87inch * 5.12inch * 1.18inch Qty per Carton 116 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 116 pcs = 41180 pcs40HQ: 825 cartons * 116 pcs = 95700 pcs
£10.99
-
WAVESHARE 1.8inch 160x128 Colorful Display Module for Mmicro:Bit,65K Colors, 1.8 inch for Microbit
1. micro:bit edge connector, directly pluggable 2. Embedded driver ST7735S, supports 65K colors 3. Onboard SRAM 23LC1024, used as display cache, no more out of memory 4. SPI interface, takes up only a few IO pins 5. Backlight adjustment via PWM 6. Reserved solder pads for control interface, make it easy to connect with Arduino/Nucleo boards 7. Driver: ST7735S 8. Resolution: 160x128 9. Color display: RGB, 65k colors 10. Operating voltage: 3.3 v 11. Dimension: 61 x 51.5mmSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 150 Carton Weight 9.50kgs / 20.94lb Carton Size 60cm * 32cm * 32cm / 23.62inch * 12.6inch * 12.6inch Loading Container 20GP: 434 cartons * 150 pcs = 65100 pcs40HQ: 1007 cartons * 150 pcs = 151050 pcs
£13.99
-
WAVESHARE 5 Inch HDMI LCD (G) 800x480 Touch Screen for Raspberry Pi Supports Various Systems, 5 Inch HDMI LCD (G)
1. 800x480 hardware resolution, configurable by software (up to 1920x1080) 2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers - When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free - When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free 3. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. 4. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 5. 3.5mm audio jack, speaker connector, supports HDMI audio output 6. Also supports VGA input (specific cable is required and should be purchased separately)Specification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 15cm * 11cm * 2cm / 5.91inch * 4.33inch * 0.79inch Qty per Carton 80 Carton Weight 27.80kgs / 61.29lb Carton Size 32cm * 32cm * 32cm / 12.6inch * 12.6inch * 12.6inch Loading Container 20GP: 813 cartons * 80 pcs = 65040 pcs40HQ: 1889 cartons * 80 pcs = 151120 pcs
£34.99
-
WAVESHARE 5 Inch HDMI LCD (H) 800x480 Touch Screen for Raspberry Pi Supports Various Systems, 5 Inch HDMI LCD (H)
1. 800x480 hardware resolution, configurable by software (up to 1920x1080) 2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers - When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free - When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free 3. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. 4. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 5. 3.5mm audio jack, speaker connector, supports HDMI audio output 6. Also supports VGA input (specific cable is required and should be purchased separately)Specification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 15cm * 11cm * 2cm / 5.91inch * 4.33inch * 0.79inch Qty per Carton 80 Carton Weight 27.80kgs / 61.29lb Carton Size 32cm * 32cm * 32cm / 12.6inch * 12.6inch * 12.6inch Loading Container 20GP: 813 cartons * 80 pcs = 65040 pcs40HQ: 1889 cartons * 80 pcs = 151120 pcs
£37.99
-
WAVESHARE 128x160 General 1.8inch LCD Display Module with SPI Interface, 1.8inch LCD Module
1. SPI interface, requires minimum GPIO for controlling 2. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) 7. Driver: ST7735S 8. Resolution: 160x128 9. Color display: RGB, 65k colors 10. Operating voltage: 3.3 v 11. Backlight: LED Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 150 Carton Weight 9.50kgs / 20.94lb Carton Size 60cm * 32cm * 32cm / 23.62inch * 12.6inch * 12.6inch Loading Container 20GP: 434 cartons * 150 pcs = 65100 pcs40HQ: 1007 cartons * 150 pcs = 151050 pcs
£5.99
-
WAVESHARE 128x128 1.44inch LCD Display HAT for Raspberry Pi, 1.44inch LCD HAT
1. Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W 2. 1x joystick (5-position), 3x pushbuttons, handy and useful 3. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) 4. Driver: ST7735S 5. Interface: SPI 6. Display color: RGB, 65K color 7. Resolution: 128x128 8. Backlight: LED 9. Operating voltage: 3.3VSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 150 Carton Weight 8.60kgs / 18.96lb Carton Size 60cm * 32cm * 32cm / 23.62inch * 12.6inch * 12.6inch Loading Container 20GP: 434 cartons * 150 pcs = 65100 pcs40HQ: 1007 cartons * 150 pcs = 151050 pcs
£6.99
-
WAVESHARE 128x64 1.3inch OLED Display HAT for Raspberry Pi, 1.3inch OLED
1. Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W 2. Optional interfaces: 4-wire SPI, 3-wire SPI, I2C, configured via onboard resistor 3. 1x joystick (5-position), 3x pushbuttons, handy and useful 4. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) 5. Driver: SH1106 6. Interface: 4-wire SPI, 3-wire SPI, I2C 7. Display color: blue 8. Resolution: 128x64 9. Operating voltage: 3.3VSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 150 Carton Weight 8.60kgs / 18.96lb Carton Size 60cm * 32cm * 32cm / 23.62inch * 12.6inch * 12.6inch Loading Container 20GP: 434 cartons * 150 pcs = 65100 pcs40HQ: 1007 cartons * 150 pcs = 151050 pcs
£6.99
-
WAVESHARE 7inch HDMI LCD (H) IPS 1024x600 Capacitive Touch Screen with Toughened Glass Cover, Supports Multi mini-PCs Multi Systems
1. 7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920 x1080) 2. Toughened glass capacitive touch panel, 6H hardness 3. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers 4. When works with Raspberry Pi, supports Raspbian, Ubuntu, -WIN10 IOT, single touch, and driver free 5. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 7. 3.5mm audio jack, supports HDMI audio output 8. Also supports VGA input (specific cable is required and should be purchased separately) 9. High quality PC case, optional tilt angle: 30 Celsius /50 CelsiusSpecification: Package Weight One Package Weight 0.53kgs / 1.16lb One Package Size 25cm * 15cm * 7cm / 9.84inch * 5.91inch * 2.76inch Qty per Carton 15 Carton Weight 8.28kgs / 18.25lb Carton Size 40cm * 36cm * 32cm / 15.75inch * 14.17inch * 12.6inch Loading Container 20GP: 578 cartons * 15 pcs = 8670 pcs40HQ: 1343 cartons * 15 pcs = 20145 pcs
£45.99
-
WAVESHARE 7inch LCD IPS 1024x600 Display for Raspberry Pi,DPI Interface, 7inch LCD IPS
1. 1024x600 high resolution 2. Compatible with Raspberry Pi 2B/3B/Zero/Zero W 3. The TFT LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz 4. Supports Raspbian, Ubuntu, OSMC, etc. 5. Backlight can be turned off to lower power consumption 6. Compact size, suit for various projects 7. Note: This item can be used for displaying ONLYSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 20cm * 12cm * 10cm / 7.87inch * 4.72inch * 3.94inch Qty per Carton 12 Carton Weight 4.60kgs / 10.14lb Carton Size 36cm * 32cm * 32cm / 14.17inch * 12.6inch * 12.6inch Loading Container 20GP: 723 cartons * 12 pcs = 8676 pcs40HQ: 1679 cartons * 12 pcs = 20148 pcs
£22.99
-
WAVESHARE 10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi, 10.1inch HDMI LCD
1. 1024 x 600 high resolution,Resistive touch control 2. Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) 3. Drivers provided (works with your own Raspbian/Ubuntu directly) 4. Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required 5. HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) 6. Backlight can be turned off to lower power consumptionSpecification: Package Weight One Package Weight 0.69kgs / 1.52lb One Package Size 26cm * 19cm * 3cm / 10.24inch * 7.48inch * 1.18inch Qty per Carton 40 Carton Weight 27.50kgs / 60.63lb Carton Size 54cm * 40cm * 32cm / 21.26inch * 15.75inch * 12.6inch Loading Container 20GP: 385 cartons * 40 pcs = 15400 pcs40HQ: 895 cartons * 40 pcs = 35800 pcs
£56.99
-
WAVESHARE 10.1inch HDMI LCD (B) Resistive Touch Screen, HDMI interface with Case, Supports Multi mini-PCs, 10.1inch HDMI LCD (B) (with case)
1. IPS screen,1280 x 800 high resolution???Capacitive touch control, supports up to ten-points touch 2. When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free 3. When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free 4. Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images 5. Supports BB Black, comes with Angstrom image 6. HDMI interface for displaying, USB interface for touch control 7. Supports 5-level backlight adjustment 8. Note: to use the LCD with following mini-PCs, additional cables are required and should be purchasedSpecification: Package Weight One Package Weight 1.36kgs / 3.01lb One Package Size 30cm * 19cm * 5cm / 11.81inch * 7.48inch * 1.97inch Qty per Carton 80 Carton Weight 27.50kgs / 60.63lb Carton Size 35cm * 32cm * 32cm / 13.78inch * 12.6inch * 12.6inch Loading Container 20GP: 744 cartons * 80 pcs = 59520 pcs40HQ: 1727 cartons * 80 pcs = 138160 pcs
£86.99
-
WAVESHARE 10.1inch Resistive Touch Screen LCD, HDMI interface with Case, Supports Multi mini-PCs, 10.1inch HDMI LCD (H) (with case)
1. 1024 x 600 high resolution,Capacitive touch control 2. When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver-free 3. When work as a computer monitor, supports Windows 10/8.1/8/7/XP, single touch, and driver-free 4. Supports BB Black, comes with Angstrom image 5. Multi video input interfaces: HDMI, VGA, and AV(CVBS) 6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 7. Supports 100-level backlight adjustment 8. Firmware is upgradable to support more new features (continually updated) 9. Note: to use the LCD with following mini-PCs, additional cables are required and should be purchasedSpecification: Package Weight One Package Weight 1.34kgs / 2.95lb One Package Size 30cm * 19cm * 5cm / 11.81inch * 7.48inch * 1.97inch Qty per Carton 80 Carton Weight 27.50kgs / 60.63lb Carton Size 35cm * 32cm * 32cm / 13.78inch * 12.6inch * 12.6inch Loading Container 20GP: 744 cartons * 80 pcs = 59520 pcs40HQ: 1727 cartons * 80 pcs = 138160 pcs
£77.99
-
WAVESHARE 7 Inch HDMI LCD (C) 1024×600 Touch Screen for Raspberry Pi Supports Various Systems, 7 Inch HDMI LCD (C)
1. 7inch IPS screen, 1024 x 600 high resolution,Capacitive touch control 2.Supports popular mini-PCs like Raspberry Pi, BB Black, etc. -When working with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IoT, single touch, and driver free -When working with other mini-PCs, driver is required and should be developed by users 3. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen 4. When works as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 5. Backlight can be turned off to lower power consumption 6. Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cableSpecification: Package Weight One Package Weight 0.43kgs / 0.95lb One Package Size 20cm * 12cm * 10cm / 7.87inch * 4.72inch * 3.94inch Qty per Carton 15 Carton Weight 7.30kgs / 16.09lb Carton Size 36cm * 32cm * 32cm / 14.17inch * 12.6inch * 12.6inch Loading Container 20GP: 723 cartons * 15 pcs = 10845 pcs40HQ: 1679 cartons * 15 pcs = 25185 pcs
£32.99
-
WAVESHARE 7 Inch HDMI LCD (B) 800×480 Touch Screen for Raspberry Pi, 7 Inch HDMI LCD (B)
1. 800 x 480 high resolution,Capacitive touch control 2. Supports popular mini-PCs like Raspberry Pi, BB Black, etc. -When working with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IoT, single touch, and driver free -When working with other mini-PCs, driver is required and should be developed by users 3. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen 4. When works as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 5. Backlight can be turned off to lower power consumption 6. Note: to use the LCD with following mini-PCs( additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable)Specification: Package Weight One Package Weight 0.43kgs / 0.95lb One Package Size 18cm * 14cm * 7cm / 7.09inch * 5.51inch * 2.76inch Qty per Carton 20 Carton Weight 8.50kgs / 18.74lb Carton Size 38cm * 36cm * 30cm / 14.96inch * 14.17inch * 11.81inch Loading Container 20GP: 649 cartons * 20 pcs = 12980 pcs40HQ: 1508 cartons * 20 pcs = 30160 pcs
£33.99
Vous avez vu 24 produits sur 33