Produits
Afficher les produits précédents
-
Waveshare Waveshare NB-IoT HAT for Raspberry Pi, for Europe, Asia, Africa, Australia, NB-IoT HAT
NB-IoT HAT for Raspberry Pi, Based on SIM7020E, B1/B3/B5/B8/B20/B28 BandsApplicable Region1. SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.2. Please check the supported bands according to your local service provider when placing order.OverviewThis is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.Features1. Raspberry Pi connectivity, compatible with any revision2. Support communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.3. Onboard USB interface, for power supply OR debugging4. Breakout UART control pins, to connect with host boards like Arduino/STM325. Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper6. SIM card slot, supports NB-IoT specific card7. 2x LED indicators, easy to monitor the working status8. Baudrate: 300bps~921600bps (115200bps by default)9. Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)10. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32/Python)Communications Specifications1. Band- FDD-LTE B1/B3/B5/B8/B20/B28 2. Data rate- Uplink=<62.5Kbps- Downlink=<26.15Kbps3. SMS- Text mode and PDU mode (depends on the NB card)General Specifications1. Power supply: 5V2. Logic level: 5V/3.3V (3.3V by default)3. Overall current (idle mode): ~18mA4. Single module current (VBAT=3.3V):- Idle mode: 5.6mA- Sleep mode: 0.4mA- PSM mode: 5uA- eDRX mode: 70uA (eDRX=655.36s)5. Dimension: 30.5mm x 65.0mmPackage Contents1. SIM7020E NB-IoT HAT x12. Antenna x13. USB type A plug to micro plug cable x14. RPi screws pack (2pcs) x1Note: The Raspberry Pi is NOT included.Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs
£14.99
-
Waveshare Waveshare OV2640 Camera Board 2 Megapixel Camera Module, 8532
Camera module, 2 MegapixelFeatures1. 2 Megapixel2. Array size: UXGA 1622X12003. Power supply: 3.3V4. IO voltage level: 1.7V~3.3V DC5. Output formats:- YUV(422/420)/YCnCr422- RGB565/555- 8-bit compressed data6. Max image transfer rate:- UXGA/SXGA 15fps- UXGA/SXGA 30fps- SVGA 30fps- CIF 60fpsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 5cm * 1cm / 2.36inch * 1.97inch * 0.39inch Qty per Carton 3200 Carton Weight 70.40kgs / 155.20lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 3200 pcs = 886400 pcs40HQ: 644 cartons * 3200 pcs = 2060800 pcs
£8.99
-
WAVESHARE Waveshare OV5640 AF 5MP USB Camera Module, Support 1080P Video Recording, AF
1. Pixels: 5MP 2. Sensor: OV5640 3. Interface: USB 2.0 4. Camera: Sensor size 1/4 inch 5. Aperture (F): 2.8 6. Focal length (EFL): 3.29 mm 7. Field of view (FOV): 68 degree 8. Distortion: Less than 1% 9. Focusing(B): AF Auto-Focus; 10. Image Format support: MJPG, YUV422 11. Static image resolution: 2592 x 1944 12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 13. Operating voltage: 5V +/- 5% 14. Camera size: 8.5 x 8.5 mm 15. Module size: 9 x 62 mmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs40HQ: 1343 cartons * 200 pcs = 268600 pcs
£20.99
-
Waveshare Waveshare OV5640 Camera Board (B), 5 Megapixel (2592x1944), Fisheye Lens Camera Module
Features1. Pixels: 5 megapixel2. Resolution: 2592x19443. Sensor: OV5640- 1.4um x 1.4um pixel with OmniBSI technology, high sensitivity, low crosstalk, low noise- Automatic image control functions: AEC, AWB, ABF, ABLC, etc.- Image quality controls: color saturation, hue, gamma, sharpness, lens correction, etc.- Supports image scaling, panning, windowing, etc.4. Lens:- CCD size: 1/4inch- Aperture (F): 2.5- Focal Length: 2.0mm- Diagonal: 170 degree (fisheye)5. Output Formats:- YUV(422/420)/YCbCr422- RGB565/555/444- CCIR656- RAW RGB- Compressed Data6. Operating Voltage: 3.3V7. Control Interface: SCCB (I2C compatible)8. Data Interface: DVP 8-bit9. Dimension: 35.70mm x 23.90mmSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 5cm * 1cm / 2.36inch * 1.97inch * 0.39inch Qty per Carton 3200 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 3200 pcs = 886400 pcs40HQ: 644 cartons * 3200 pcs = 2060800 pcs
£13.99
-
Waveshare Waveshare OV5640 Camera Module Board (A), 5 Megapixel (2592x1944), Based on OV5640 Image Sensor
Features1.Pixels: 5 megapixel2.Resolution: 2592x19443.Sensor: OV5640 3.1 1.4um x 1.4um pixel with OmniBSI technology, high sensitivity, low crosstalk, low noise 3.2 Automatic image control functions: AEC, AWB, ABF, ABLC, etc. 3.3 Image quality controls: color saturation, hue, gamma, sharpness, lens correction, etc. 3.4 Supports image scaling, panning, windowing, etc.4.Lens: 4.1 CCD size: 1/4inch 4.2 Aperture (F): 2.8 4.3 Focal Length: 2.8mm 4.4 Diagonal: 63 degree5.Output Formats: 5.1 YUV(422/420)/YCbCr422 5.2 RGB565/555/444 5.3 CCIR656 5.4 RAW RGB 5.5 Compressed Data6.Operating Voltage: 3.3V7.Control Interface: SCCB (I2C compatible)8.Data Interface: DVP 8-bit9.Dimension: 35.70mm × 23.90mmSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 4cm * 1cm / 2.36inch * 1.57inch * 0.39inch Qty per Carton 4000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4000 pcs = 1108000 pcs40HQ: 644 cartons * 4000 pcs = 2576000 pcs
£13.99
-
WAVESHARE Waveshare OV5640 FF 5MP USB Camera Module, Support 1080P Video Recording, FF
1. Pixels: 5MP 2. Sensor: OV5640 3. Interface: USB 2.0 4. Camera: Sensor size 1/4 inch 5. Aperture (F): 2.8 6. Focal length (EFL): 3.29 mm 7. Field of view (FOV): 68 degree 8. Distortion: Less than 1% 9. Focusing(C): FF Fixed-Focus 10. Image Format support: MJPG, YUV422 11. Static image resolution: 2592 x 1944 12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 13. Operating voltage: 5V +/- 5% 14. Camera size: 8.5 x 8.5 mm 15. Module size: 9 x 62 mmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs40HQ: 1343 cartons * 200 pcs = 268600 pcs
£20.99
-
WAVESHARE Waveshare OV9281-120 1MP Mono Camera Module for Raspberry Pi, Global Shutter, OV9281-120 Module
1. 1MP, global shutter, 120 degree FOV, OV9281-120 mono camera, compatible with Raspberry Pi series boards 2. The global shutter eliminates jello-effect while shooting fast moving objects, more suitable for high frame rate capturing 3. Working with Raspberry Pi, direct connect to Raspberry Pi different variants including 4B / 3B+ / 3A+ / 3B / 2B / B+ / A+, extra FPC cable is equired for Zero / Zero 2 W series Specifications: 1. Sensor: OV9281 2. CMOS size: 1/4 inch 3. Camera type: Mono 4. Pixels: 1MP (1280 x 800) 5. Shutter: Global Shutter 6. Aperture: F2.5 7. Distortion: Less than 7.5% 8. Field of vies: 120 degree 9. Focal length: 3.15mm 10. Focusing: Fixed focus Package List: 1. OV9281-120 Camera x 1 2. 15-pin FFC (opposite sides contact) x 1Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs40HQ: 1439 cartons * 200 pcs = 287800 pcs
£20.99
-
Waveshare Waveshare PCF8563 RTC Board
Overview1. The PCF8563 RTC Board provides the real-time clock/calendar function, which can be driven by a battery on board and works independently even when the MCU is turned off.2. The PCF8563 RTC Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, its more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector.FeaturesPCF8563, I2C pinheader, I2C connector, 3.3V battery includedSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 13cm * 4cm * 3cm / 5.12inch * 1.57inch * 1.18inch Qty per Carton 520 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 520 pcs = 170560 pcs40HQ: 763 cartons * 520 pcs = 396760 pcs
£2.99
-
WAVESHARE Waveshare PL2303 USB To UART (TTL) Communication Module V2
Features1. Adopt PL2303GS new version device 2. Support windows XP/7/8/10/11/... 3. 3x VCCIO power mode via jumper setting: - VCCIO - 5V: 5V output - VCCIO - 3.3V: 3.3V output 4. Open the jumper: powered from target board (1.8V/2.5V/3.3V/5V) 5. 3x LED indicators: TXD, RXD, PWRPackage List1. PL2303 USB UART Board (type A) V2 x1 2. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 500 pcs = 283000 pcs40HQ: 1314 cartons * 500 pcs = 657000 pcs
£2.99
-
WAVESHARE Waveshare PoE UPS Base Board for Raspberry Pi CM4, Gigabit Ethernet, Dual HDMI, Quad USB2.0, PoE UPS Base Board
Features1. PoE UPS Base For CM4: Uninterruptible power supply, powering the CM4 while recharging 2. Connecting With Compute Module 4: Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable For Compute Module 4 Lite/EMMC Series Module 3. Uninterruptible Power: It is able to charge the batteries and provide power output for the system at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble 4. Multi Power Supply Options: - Three external power supply options: USB interface, wide voltage DC, and PoE - When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected status after being fully charged, so as to avoid battery life damaging caused by frequently charging and discharging - When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation - When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. When the external power supply is disconnected, it will automatically switch over to batteries output without interrupting the system operation 5. Safe And Stable Circuit Design: Protection circuits for over charge/discharge, over current, short circuit, and reverse-proof along with the standalone resettable fuse for each battery, more safe and stable 6. Real Time Monitoring: Monitoring the batteries voltage, current, power, and remaining capacity via I2C. (When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss) Note: The 18650 batteries are not includedSpecifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Battery support: Parallel 18650 Li-ion battery x 3 (NOT included) 3. Networking: Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V/2.5A) 4. USB: USB 2.0 Type A ?? 4 5. Connector: - Raspberry Pi 40PIN GPIO header - M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface 6. Display: MIPI DSI port x 1 (22pin 0.5mm FPC connector) 7. Camera: MIPI CSI-2 port x 2 (22pin 0.5mm FPC connector) 8. Video: HDMI x 2, supports 4K 30fps output 9. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 10. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 11. Fan: Allows speed adjustment and measurement, 5V / 12V 12. Indicator: - M.2 status LED - CM4 status LED 13. Power input7-36V 14. Dimensions: 175.0 x 108.0mmSpecification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 919 cartons * 100 pcs = 91900 pcs
£43.99
-
Waveshare Waveshare Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision, Type B
Features1. Raspberry Pi camera, supports all revisions of the Pi2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size: 1/4 inch- Aperture (F): 1.2- Focal Length: 8mm- Angle of View (diagonal): 40 degree- Sensor best resolution: 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 31mm x32mmNote: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableNote: The actual image pixels is 5MP, which depends on the sensor, so it doesnt matter that there is a 3MP silk mark on the camera.Package Contents1. RPi IR-CUT Camera (B) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 36cm * 36cm * 40cm / 14.17inch * 14.17inch * 15.75inch Loading Container 20GP: 514 cartons * 720 pcs = 370080 pcs40HQ: 1194 cartons * 720 pcs = 859680 pcs
£17.99
-
WAVESHARE Waveshare Raspberry Pi PoE+ HAT Ethernet Expansion Board for Raspberry Pi 3B+/4B
Product Overview1. The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time. 2. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.Specification1. PoE standard: 802.3af/at 2. Input voltage: 37-57 V DC, Class 4 device 3. Output voltage/current: 5V DC/4A 4. Current sense: Yes 5. Transformer design: Planar 6. Fan: Controllable brushless cooling fan, delivering 2.2 CFM for processor cooling 7. Fan size: 25 x 25mm 8. Feature: Fully isolated switched-mode power supply 9. Compatible with: Raspberry Pi 3B+/4BPackage List1. Raspberry Pi PoE+ HAT x1 2. Standoffs pack x1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£30.99
-
WAVESHARE Waveshare Raspberry Pi Zero 2W To 3B Adapter for Raspberry Pi 3 Model B/B+, Pi Zero 2W To 3B
1. Using pogo pin connection, the Zero 2W can be easily attached 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. Onboard headphone jack(extended from USB) and an additional speaker header 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive 6. Not compatible with the first generation Zero Package List: 1. Zero-to-Pi3-Adapter (B) x 1 2. HD-MI Adapter x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 100 Carton Weight 6.50kgs / 14.33lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs40HQ: 885 cartons * 100 pcs = 88500 pcs
£14.99
-
WAVESHARE Waveshare Raspberry Pi Zero To 3B Adapter for Raspberry Pi 3 Model B/B+, Pi Zero To 3B
1. Zero can be easily attached via specially designed connectors 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. The same GPIO header height as 3B, easily connecting with 3B series HATs or development projects 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptiveSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs
£12.99
-
Waveshare Waveshare Rotation Sensor, Rotation
OverviewDetects clockwise/anti-clockwise rotations: degrees and lapsSpecifications1. Pulses per lap: 152. Power: 3.0V ~ 5.3V3. Dimension: 32.1mm * 15.4mm4. Mounting holes size: 2.0mmApplicationsPositioning in Industrial ControlsHow to UseIn the case of working with a MCU:1. VCC -- 3.0V ~ 5.3V2. GND -- Power supply ground3. SW -- MCU.IO (encoder button status)4. SIB -- MCU.IO (output status)5. SIA -- MCU.IO (output status)Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 2cm * 1cm / 1.97inch * 0.79inch * 0.39inch Qty per Carton 9600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 9600 pcs = 2659200 pcs40HQ: 644 cartons * 9600 pcs = 6182400 pcs
£2.99
-
WAVESHARE Waveshare RP2040-LCD-0.96 Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader, RP2040-LCD-0.96
RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi RP2040 microcontroller chip, as same as on Raspberry Pi Pico. For software development, either Raspberry Pi C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. In additional, there are also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. 0.96 inch 160x80 pixels 65K colorful IPS LCD display 6. Lithium battery recharge/discharge header, suitable for mobile devices 7. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 8. Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components) 9. USB 1.1 with device and host support 10. Low-power sleep and dormant modes 11. Drag-and-drop programming using mass storage over USB 13. 26 x multi-function GPIO pins 14. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 15. Accurate clock and timer on-chip 16. Temperature sensor 17. Accelerated floating-point libraries on-chip 18. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£8.99
-
WAVESHARE Waveshare RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader, RP2040-Plus with Pinheader
Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 x multi-function GPIO pins 12. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs
£5.99
-
Waveshare Waveshare RPi Camera (D) Fixed-focus Camera Module, 11297
Features1. Raspberry Pi Camera, compatible with the original one, supports all revisions of the Pi2. 5 megapixel OV5647 sensor in a fixed-focus module3. Camera specifications- CCD size : 1/4 inch- Aperture (F) : 2.8- Focal Length : 3.4 mm- Angle of View (diagonal) : 66 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p 30fps, 720p 60fps and 640x480p 60/90fps video record6. Dimension: 25mm x 24mm x 9mmPackage Contents1. RPi Camera (D) x12. 15-pin FFC (opposite sides contact) x1Note: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 5cm * 4cm * 1cm / 1.97inch * 1.57inch * 0.39inch Qty per Carton 4800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4800 pcs = 1329600 pcs40HQ: 644 cartons * 4800 pcs = 3091200 pcs
£10.99
-
Waveshare Waveshare RPi Camera (G) Module, Wide Field of View Fisheye Lens
Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras 5.5are typically 72 degree)- Sensor best resolution : 1080p6. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting fill flash LED7. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (G) x12. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 5cm * 2cm / 2.36inch * 1.97inch * 0.79inch Qty per Carton 1600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1600 pcs = 443200 pcs40HQ: 644 cartons * 1600 pcs = 1030400 pcs
£14.99
-
waveshare Waveshare RPi Camera (H) Module, Fisheye Lens, Supports Night Vision, (H) Fisheye Lens Module
Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (H) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 6cm * 5cm * 2cm / 2.36inch * 1.97inch * 0.79inch Qty per Carton 1600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1600 pcs = 443200 pcs40HQ: 644 cartons * 1600 pcs = 1030400 pcs
£18.99
-
Waveshare Waveshare RPi Motor Driver Board
Raspberry Pi Expansion Board, DC Motor / Stepper Motor DriverFeatures1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. Freescale H-bridge driver MC33886, controls DC motors to turn in both directions3. Onboard 5V regulator, provides power to Raspberry Pi4. Onboard IR receiver, used for remote control robot5. Multi protection circuit, excellent stability- 2A self-recovery fuse, keep your Pi safe- Driver chip features Short-Circuit Shutdown for Large Output Current, Undervoltage Disable Function- Reversed polarity protection for motor output- Anti-reverse diode for power supply6. Power input range: 7V~40V7. Single motor output current: up to 5A8. Power supply current for Raspberry Pi: up to 2AWhats on Board1. Raspberry Pi Expansion Board on board resource2. Raspberry Pi GPIO interface: for connecting Raspberry Pi3. Motor screw terminal: for connecting motors4. External power input5. 74LVC4245AD: voltage level conversion chip, buffer device6. MC33886: motor driver chip7. LM2596-5.0: 5V regulator8. Power indicator9. Raspberry Pi power selection10. OFF: Raspberry Pi powers the Motor Driver Board11. ON: Motor Driver Board powers the Raspberry Pi12. 2A self-recovery fuse13. IR receiver14. Schottky diodes: protects the motor driver15. Power supply anti-reverse diodePackage Contents1. RPi Motor Driver Board x 12. RPi screws pack (2pcs) x 1Specification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 9cm * 8cm * 3cm / 3.54inch * 3.15inch * 1.18inch Qty per Carton 390 Carton Weight 21.84kgs / 48.15lb Carton Size 54cm * 40cm * 39cm / 21.26inch * 15.75inch * 15.35inch Loading Container 20GP: 316 cartons * 390 pcs = 123240 pcs40HQ: 734 cartons * 390 pcs = 286260 pcs
£19.99
-
Waveshare RPi Relay Board, RPi Relay Board
OverviewThe RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent.RPi Relay Board Features1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. High quality relays, loads up to 5A 250V AC or 5A 30V DC3. Photo coupling isolation, prevent interference from high voltage circuit4. Onboard LEDs for indicating relays status5. Relay control jumper, allows to control the relays by custom pins other than the default pins6. Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835What is on the RPi Relay Board1. Raspberry Pi GPIO interface: for connecting Raspberry Pi2. Relay screw terminal: for connecting target devices3. Relays4. Photocoupler: PC8175. Relay indicator- LED on: relay NC is opened, NO is closed- LED off: relay NC is closed, NO is opened6. Power indicator7. Relay control jumper- Short the jumper: control the relays by default I/Os used in the example code- Open the jumper: control the relays by custom I/Os through jumper wiresPackage include- RPi Relay Board x 1- RPi screws pack (2pcs) x 1Specification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 8cm * 7cm * 2cm / 3.15inch * 2.76inch * 0.79inch Qty per Carton 700 Carton Weight 52.50kgs / 115.74lb Carton Size 56cm * 35cm * 40cm / 22.05inch * 13.78inch * 15.75inch Loading Container 20GP: 340 cartons * 700 pcs = 238000 pcs40HQ: 789 cartons * 700 pcs = 552300 pcs
£9.99
-
WAVESHARE Waveshare RS485 CAN Expansion Board for Jetson Nano, Digital Isolation, Built-In Protection Circuit
1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Onboard CAN controller MCP2515 via SPI interface, matching with SIT65HVD230DR transceiver 3. Features RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485 4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, light-ningproof & anti-electrostatic 5. Onboard digital isolation chip, safer signal isolation communication and better stability and anti-interference 6. Reserved control pins, allows to work with other control boards 7. Comes with development resources and manual (examples in python)Specifications1. CAN Controller: MCP2515 2. CAN transceiver: SIT65HVD230DR 3. RS485 transceiver: SP3485 4. Working voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Dimensions: 100 x 79 mmPackage List1. RS485 CAN for Jetson Nano x1 2. Screws pack x1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 7cm * 2cm / 4.72inch * 2.76inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs40HQ: 1162 cartons * 200 pcs = 232400 pcs
£16.99
-
Waveshare Waveshare RS485 to Ethernet Converter, US Plug, RS485
RS485 to Ethernet Converter, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.Features1. M0 series 32-bit ARM processor, fast speed, high efficiency2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Configurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)5. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software6. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data7. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished8. Support customized webpage, allows user to customize the module configuration page9. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change10. KeepAlive mechanism, detects broken connection, auto re-connecting11. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time12. Support DNS domain name resolution, configurable DNS server13. Support DHCP, auto-obtained IP or static IP14. Firmware is upgradable via the network15. Restore to factory settings via software and/or hardware16. Comes with default MAC address, which is customizable17. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software18. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 1.5KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client- TX cache: 6Kbyte- RX cache: 4Kbyte2. RS485:- Connector: screw terminal (A+, B-, GND)- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- RX cache: 800byte- Hardware flow control: none- Interface protection:- 2KV ESD protection- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~7.0V (5V recommended)- Operating current: 150mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -25~75 degree C- Storage temperature: -40~105 degree C5. Size: 69.65*63.59*25.47mmPackage Contents1. RS485 TO ETH x12. 5V power adapter x1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 8cm * 7cm * 3cm / 3.15inch * 2.76inch * 1.18inch Qty per Carton 455 Carton Weight 121.94kgs / 268.83lb Carton Size 56cm * 35cm * 39cm / 22.05inch * 13.78inch * 15.35inch Loading Container 20GP: 348 cartons * 455 pcs = 158340 pcs40HQ: 809 cartons * 455 pcs = 368095 pcs
£23.99
Vous avez vu 96 produits sur 111