Resultados de la búsqueda de "Arduino board"

1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)3. Built-in 512KB SRAM and 384KB ROM, stacked with 4MB Flash and 2MB PSRAM or 8MB Flash and 8MB PSRAM4. Features a stamp-hole design and onboard ceramic antenna for easy integration into user-designed baseboards5. Supports flexible clock and individual module power settings for low-power modes in various scenarios6. Integrated USB serial port full-speed controller with 24 GPIOs for flexible peripheral configuration7. Features 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, and 2 x ADC peripherals8. Supports MicroPython, ESP-IDF, and Arduino9. Compact size, using a half-hole design for easy integration with other motherboards.10. Multiple low-power operating modes meet the power consumption requirements of Internet of Things (IoT), mobile devices, wearable electronic devices, smart home applications, etc.11. Press and hold the BOOT (GPIO0) button before connecting the Type-C cable each time firmware is downloaded.12. When powered by an external power source, input 3.7V~6V power at the half-hole marked with 5V.13. Dimensions: 18x23.5mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 14.30kgs / 31.53lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs

Leer Más Menos

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory6. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance7. Type-C connector, more convenient to use8. The onboard CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface9. Onboard DC-DC chip MP28164, high-efficiency DC-DC step-down boost chip, the load current can reach 2A10. 27 x multi-function GPIO pins, configurable pin functions, allowing flexible development and integration11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16-bit camera interface), LCD interface (8-16-bit parallel RGB, 18080, MOTO6800), etc., Flexible realization of various functions12. Castellated modules allow direct soldering to the carrier board13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios14. Support the ecosystem of Raspberry Pi Pico expansion board, suitable for artificial intelligence loT application development15. Support ESP-IDF, Arduino, MicroPython comprehensive SDK, development resources, tutorials, help you get started easily16. ESP32-S3 is specially designed for AloT applications, using Xtensa 32-bit LX7 dual-core processor with a frequency up to 240 MHz, powerful aluminum computing capability and reliable security features17. WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor19. 2.4G monopole ceramic antenna20. W25Q128JVSIQ: 16MB Flash21. Start button: press to enter download mode when reset22. CH334F: USB HUB controller23. CH343P: USB to UART chip24. MP28164: High-efficiency DC-DC step-down boost chip25. Support more Pico expansion modules: Eval-Board, 3.5-inch LCD, 1.3-inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS moduleSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 500 pcs = 145000 pcs40HQ: 674 cartons * 500 pcs = 337000 pcs

Leer Más Menos

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs

Leer Más Menos

NUCLEO-L476RG DescriptionThe STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino? connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger and programmer.The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to mbed online resources.NUCLEO-L476RG Key FeaturesSTM32 microcontroller with LQFP64 packageTwo types of extension resourcesArduino Uno Revision 3 connectivitySTMicroelectronics Morpho extension pin headers for full access to all STM32 I/Osmbed-enabled (http://mbed.org)On-board ST-LINK/V2-1 debugger/programmer with SWD connectorselection-mode switch to use the kit as a standalone ST-LINK/V2-1Flexible board power supplyUSB VBUS or external source(3.3 V, 5 V, 7 - 12 V)Power management access pointThree LEDsUSB communication (LD1), user LED (LD2), power LED (LD3)Two push buttons: USER and RESETUSB re-enumeration capability: three different interfaces supported on USBVirtual Com portMass storageDebug portSupported by wide choice of Integrated Development Environments (IDEs) including IAR?, Keil?, GCC-based IDEsSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 192 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 192 pcs = 59136 pcs40HQ: 716 cartons * 192 pcs = 137472 pcs

Leer Más Menos

1. ESP32-S3-DEV-KIT-N8R8 is a microcontroller development board with a small size and a variety of digital interfaces.2. In terms of software, you can choose ESP-IDF, Arduino, MicroPython and other development environments for development, so that you can get started easily and quickly, and apply them to products.3. Using ESP32-S3-WROOM-1-N8R8 module, equipped with Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz4. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory5. Integrated 2.4GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE) dual-mode wireless communication with superior RF performance6. Using the USB Type-C interface, no need to tangle with the front and back plugs7. The onboard CH343 and CH334 chips can meet the development and use requirements of USB and UART through a Type-C interface8. Lead out rich peripheral interfaces, pin compatible with ESP32-S3-DevKitC-1 development board, strong compatibility and expandability9. Stamp hole design, can be directly welded and integrated into the bottom plate designed by the user10. Support a variety of low-power working states, adjust the balance between communication distance, data rate and power consumption, and meet the power consumption requirements of various application scenariosSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs

Leer Más Menos

Overview Due to the advantages of ultra-low power consumption, wide viewing angle, and clear display without electricity, it is an ideal choice for applications such as shelf labels and industrial instruments. Features 1. Without backlight, the last content can be displayed for a long time even if it is turned off 2. Ultra-low power consumption, basically only need to refresh the power supply 3. Attached with development resources and manuals (example of Arduin-esp32) Product specifications 1. Working voltage: 3.3V 2. Interface: 3-wire SPI, 4-wire SPI 3. Display color: black, white 4. Grayscale: 2 5. Full refresh time: 8s 6. Refresh power: 26.4mW (typical value) 7. Driver chip: DEPG0213BN ESP32 features: 1. Immersion Gold Craft 2. High cost performance 3. Small size, easy to embed other products 4. Powerful function supports LWIP protocol, Freertos 5. WiFi supports three modes: AP, STA and AP + STA 6. Support Windows system (cygwin and msys32) and Linux system 7. Support Arduino-ide, ESP-IDF, Micropython multiple development environments 8. Support Lua program, easy developmentSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch Qty per Carton 300 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 300 pcs = 281700 pcs40HQ: 2180 cartons * 300 pcs = 654000 pcs

Leer Más Menos

1. Utilizing the ESP32-C5-WROOM-1 series module, equipped with a 32-bit RISC-V processor with a maximum frequency of 240 MHz2. Integrating 384KB SRAM, 320KB ROM, 8MB PSRAM and 32MB Flash, meeting the requirements for program execution, graphical interface and data storage3. Integrating 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth 5 (LE) and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent radio performance4. Built-in battery charging management module, with a reserved 3.7V MX1.25 lithium battery interface, allowing external battery connection for power supply5. Using Type-C interface, eliminating the need to worry about the orientation of insertion, improving user convenience and device compatibility6. Built-in 2.8-inch LCD screen, with a resolution of 240 x 320 pixels and 262K color7. Supports I2C interface control for capacitive touch and interrupts8. Exports UART, I2C and some IO interfaces, integrates full-speed USB serial port9. Built-in QMI8658 six-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor and Micro SD card slot10. Supports flexible clock, various power modes for precise control, achieving low-power modes in multiple scenarios11. Built-in ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI12. Supports ESP-IDF / Arduino development environments, with abundant resources and easy to get startedLCD screen parameters1. Display panel: IPS2. Display size: 2.8 inches3. Display resolution: 240 x 320 pixels4. Display color: 262K5. Communication interface: 4-wire SPI6. Driving IC: ST77897. Touch IC: CST35308. Touch type: capacitive sensing type9. Screen effective size: about 5.76 x 4.32 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 108 Carton Weight 8.00kgs / 17.64lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 108 pcs = 50328 pcs40HQ: 1083 cartons * 108 pcs = 116964 pcs

Leer Más Menos

1. Microprocessor (MPU): Qualcomm Dragonwing IQ8 (QCS8275); octa-core Arm Cortex CPU; Adreno 623 GPU; Adreno VPU 623; Hexagon NPU; Qualcomm Spectra 692 ISP 2. AI Acceleration: Hexagon Tensor AI Processor, up to 40 dense TOPS 3. Microcontroller (MCU): STM32H5F5, Arm Cortex-M33, up to 250 MHz; 4 MB Flash; 1.5 MB RAM 4. System: MPU pre-installed with Ubuntu Linux, with support for Debian; MCU based on Arduino Core running Zephyr OS 5. Memory / Storage: 16GB LPDDR5 (2 x 8GB) / 64GB eMMC 6. Expandable Storage: M.2 Key M 2230, PCIe Gen 4 x 4, NVMe-compatible; for expandable storage only; does not support booting from NVMe 7. Wireless Connectivity: Tri-band Wi-Fi 6 (2.4/5/6 GHz) with 2 onboard antennas; Bluetooth 5.3 with an onboard antenna 8. Wired Networking: 1 x 2.5 Gbit RJ45 Ethernet 9. USB: 1 x USB-C, supports host/device role switching, power delivery role switching, and video output; 2 x USB 3.0 Type-A; JOMEGA provides 2 USB 3.0 ports 10. Cameras: 3 x MIPI CSI interfaces; JMEDIA provides 2 multiplexed MIPI CSI channels; supports USB cameras 11. Video Output: 1 x HDMI; USB-C DisplayPort Alt Mode; JMEDIA MIPI DSI (shared with HDMI) 12. Audio: MAX98091 audio decoder; JMISC provides microphone input, stereo headphone output, mono speaker output, and line-out; JOMEGA provides microphone input 13. CAN-FD: 1 channel via terminal blocks with PHY; 3 channels via JOMEGA without PHY; 1 channel via UNO Shield header without PHY 14. On-board Interaction: 8 x 13 monochrome blue LED dot matrix; 4 user-programmable RGB LEDs; power indicator; USB-C PD fault indicator; user button; reset button 15. Power: USB-C PD: 9–20 V, up to 3 A; DC power connector: 7–24 V, up to 5 A; screw terminal blocks: 7–24 V, up to 10 A 16. Operating Temperature: -10 to +60 degrees Celsius 17. PCBA Dimensions: Approximately 16 x 10 x 2.58 cm (height excludes heat sink and fan)Dual-Architecture Design:1. Processor: AI computing core uses Qualcomm Dragonwing IQ8 (QCS8275); real-time control core uses STM32H5F52. Key Resources: The AI computing core includes an octa-core Arm Cortex CPU, Adreno 623 GPU, Adreno VPU 623, Hexagon NPU, and Qualcomm Spectra 692 ISP; the real-time control core includes an Arm Cortex-M33 at 250 MHz, 4 MB of Flash, and 1.5 MB of RAM3. Software System: The AI computing core runs Ubuntu Linux and also supports Debian; the real-time control core runs Arduino Core based on Zephyr OS4. Primary Tasks: The AI computing core handles local AI, machine vision, network communication, multimedia processing, and Linux applications; the real-time control core handles real-time control of GPIO, PWM, CAN-FD, ADC, sensors, and actuators5. Collaboration Method: Commands, status, and data are exchanged via the Arduino Bridge (RPC)Features:1. MPU + MCU dual-processor architecture: The Qualcomm Dragonwing IQ8 (QCS8275) handles Linux, AI, vision, networking, and multimedia tasks; the STM32H5F5 MCU provides deterministic real-time I/O and control capabilities2. Up to 40 dense TOPS of edge AI performance: The Hexagon NPU supports local execution of computer vision, speech processing, LLM/VLM, and multimodal applications. Onboard 16 GB LPDDR5 and 64 GB eMMC meet storage requirements for the system, models, and application data3. Extensive expansion options for robotics and industrial control: Features tri-band Wi-Fi 6, Bluetooth 5.3, 2.5 Gbit RJ45, M.2 2230 NVMe, HDMI, three MIPI CSI lanes, CAN-FD, UNO Shield, 40-pin JHAT, and Qwiic interfaces, among othersSpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 21cm * 15cm * 6cm / 8.27inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 10.00kgs / 22.05lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 20 pcs = 11820 pcs40HQ: 1373 cartons * 20 pcs = 27460 pcs

Leer Más Menos

1. ESP32-C5-Touch-LCD-3.5 is a microcontroller development board designed by Waveshare. Onboard 3.5-inch LCD screen, power management chip, 6-axis sensor, temperature and humidity sensor, Micro SD card slot, etc., providing hardware foundation for display, sensing, voice, and multimedia storage. Relying on these hardware, the product can connect to online AI LLM platforms to achieve intelligent voice interaction and visual interaction.2. Adopts ESP32-C5-WROOM-1U series module, equipped with a RISC-V 32-bit processor, main frequency up to 240 MHz.3. Integrated 384 KB SRAM, 320 KB ROM, 8 MB PSRAM, and 32 MB Flash, meeting the needs for program execution, graphical user interfaces, and data storage.4. Integrated 2.4 GHz and 5 GHz dual-band Wi-Fi, Bluetooth 5 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance.5. Onboard camera interface, supporting BF3901 camera.6. Onboard battery charge management module, with a reserved 3.7V MX1.25 lithium battery interface for external battery power supply.7. Uses Type-C interface, improving user convenience and device compatibility.8. Onboard 3.5-inch capacitive touch HD IPS screen, 320 x 480 resolution, 262K colors, capable of displaying color images clearly.9. Built-in ST7796 driver chip and FT6336 capacitive touch chip, using SPI and I2C interfaces for communication respectively, saving interface pin resources.10. Leads out UART, I2C, and some IO interfaces, integrated full-speed USB serial port.11. Onboard QMI8658 6-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor, and TF card slot, etc.12. Onboard PWR and BOOT customizable side buttons, convenient for custom feature development using buttons.13. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker, easily playing with Xiaozhi AI.14. Supports ESP-IDF / Arduino development environments, rich resources, easy to get started.LCD Screen Specifications:1. Display panel: IPS2. Display size: 3.5 inch3. Display resolution: 320 x 480 pixels4. Display color: 262K5. Display brightness: 450 cd/m26. Contrast ratio: 1100:17. Communication interface: SPI8. Driver IC: ST77969. Touch type: Capacitive sensing10. Touch IC: FT6336Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 45cm * 26cm * 38cm / 17.72inch * 10.24inch * 14.96inch Loading Container 20GP: 599 cartons * 100 pcs = 59900 pcs40HQ: 1392 cartons * 100 pcs = 139200 pcs

Leer Más Menos

1. The ESP32-C5-Zero is a compact multi-protocol development board based on the ESP32-C5-HF4, integrating wireless communication, USB interface and onboard peripherals, suitable for embedded and IoT applications.2. Equipped with a 32-bit RISC-V processor with a maximum frequency of 240 MHz.3. Integrated with 384KB SRAM, 320KB ROM and 4MB Flash.4. Equipped with dual-band Wi-Fi at 2.4GHz and 5GHz, Bluetooth 5.0 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance.The board includes an onboard antenna switching chip, allowing the use of the onboard antenna or an external antenna (IPEX-1).5. Utilizes a USB Type-C interface that is both front and back plug-and-play.6. Exports a rich set of peripheral interfaces, with a stamp hole design, facilitating soldering and integration onto a user-designed baseboard.7. Supports multiple low-power operating modes, enabling flexible adjustment of communication range, data rate, and power consumption balance to meet the power consumption requirements of various application scenarios.8. Supports ESP-IDF, Arduino, and MicroPython, along with a complete SDK and open-source documentation tutorials, facilitating quick integration into applications.Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 384 Carton Weight 16.50kgs / 36.38lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 384 pcs = 158208 pcs40HQ: 958 cartons * 384 pcs = 367872 pcs

Leer Más Menos