Resultados de la búsqueda de "electronics components"

About the product1. Replacement LCD Screen for Asus Zenfone 6 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement partsBefore Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Asus: Zenfone 6 Types LCD Screen + Touch Screen Digitizer Assembly Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 7.00kgs / 15.43lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

Overview1. XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.2. Clock circuit, USB power management3. Onboard devices: USB HS PHY, Ethernet PHY, 1G Bit NandFlash4. Connectors：USB HS (mini / type A), USB FS (mini), Ethernet (RJ45)5. All the idle I/O ports are accessible on the pin headers6. 2.0mm pin header pitch, smaller size, easier to integrate into user system7. Note : please consider the EVK407I, which supports easily programing/debugging.What is On BoardSTM32F407IGT6 development board on board resource1. STM32F407IGT6: The high performance STM32 MCU which features:- Core: Cortex-M4 32-bit RISC- Feature: a full set of single-cycle DSP instructions- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz- Operating Voltage: 1.8V-3.6V- Package: LQFP176- Memories: 1024kB Flash, 192+4kB SRAM- MCU communication Interfaces:-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C-- 1 x FSMC, 1 x SDIO, 2 x CAN-- 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY-- 1 x 10/100 Ethernet MAC-- 1 x 8 to 14-bit parallel camera interface- AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP2. MIC2075-2, onboard USB FS power management device3. AMS1117-3.3, 3.3V voltage regulator4. K9F1G08U0E, 1G Bit NandFlash5. DP83848, Ethernet PHY6. MIC2075-1, onboard USB HS power management device7. USB3300, USB HS PHY8. Power supply switch, powered from 5Vin or USB connection9. Boot mode switch, for configuring BOOT0 pin10. Power indicator11. USB FS LED12. USB HS LED13. Reset button14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication15. 24M crystal, USB3300 clock16. 50M crystal, DP83848 clock17. 32.768K crystal, for internal RTC with calibration18. Ethernet connector19. USB FS mini connector20. USB HS mini connector21. USB HS type A connector22. MCU pins expander, VCC, GND and all the idle I/O ports are accessible on expansion connectors for further expansion23. USB OTG/HOST jumper24. VREF/VBAT jumper25. Ethernet I/O selection solder joint26. USB HS I/O selection solder joint27. PDR selection solder joint: 1.8-3.6V, -40～105℃ OR 1.7-3.6V, 0～70℃Package Contents1. XCore407I development board x 12. USB type A to Mini-B cable x 13. Software CD x 1Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs

Leer Más Menos

1. Type: Switching DC regulator2. Maintain special power supply for communication, which is designed for mobile phones and other communication equipment3. The voltage measurement interface can be replaced by a precision digital voltmeter to measure the voltage DC4. RF signal detection, suitable for maintenance of communication equipment5. Handle the protection after short circuit, and have sound and light prompts, and automatically recover the output within 1 second after being eliminated6. Unit weight: 1.5kg7. Dimensions: 25.5x13.5x14cm8. Output voltage: DC 0-15V, 1.5V, 3.6V, 4.8V, 6V, 7.2VSpecification: Package Weight One Package Weight 1.45kgs / 3.19lb One Package Size 28cm * 15cm * 16cm / 11.02inch * 5.91inch * 6.3inch Qty per Carton 18 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 18 pcs = 3186 pcs40HQ: 412 cartons * 18 pcs = 7416 pcs

Leer Más Menos

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory6. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance7. Type-C connector, more convenient to use8. The onboard CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface9. Onboard DC-DC chip MP28164, high-efficiency DC-DC step-down boost chip, the load current can reach 2A10. 27 x multi-function GPIO pins, configurable pin functions, allowing flexible development and integration11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16-bit camera interface), LCD interface (8-16-bit parallel RGB, 18080, MOTO6800), etc., Flexible realization of various functions12. Castellated modules allow direct soldering to the carrier board13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios14. Support the ecosystem of Raspberry Pi Pico expansion board, suitable for artificial intelligence loT application development15. Support ESP-IDF, Arduino, MicroPython comprehensive SDK, development resources, tutorials, help you get started easily16. ESP32-S3 is specially designed for AloT applications, using Xtensa 32-bit LX7 dual-core processor with a frequency up to 240 MHz, powerful aluminum computing capability and reliable security features17. WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor19. 2.4G monopole ceramic antenna20. W25Q128JVSIQ: 16MB Flash21. Start button: press to enter download mode when reset22. CH334F: USB HUB controller23. CH343P: USB to UART chip24. MP28164: High-efficiency DC-DC step-down boost chip25. Support more Pico expansion modules: Eval-Board, 3.5-inch LCD, 1.3-inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS moduleSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 500 pcs = 145000 pcs40HQ: 674 cartons * 500 pcs = 337000 pcs

Leer Más Menos

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for iPhone XR. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Certificate GPSR Compatible with Apple: iPhone XR Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 7.60kgs / 16.75lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy A10. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Samsung: Galaxy A10 Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

1. Adopts closed loop of transducer with Mcu intelligent drive, digital LED display. Fast and stable heating up, good for lead free work. 2. The air flow can be adjustable, and air blowing is low noise and gentle, plastic components won't be deformed. 3. Suitable for removing SOIC, PLCC, chip, QFP and BGA 4. 3 air gun nozzles available, easy to replace 5. Air Temperature Range: 150-500 Celsius degree 6. Soldering Iron Temperature Range: 200-480 Celsius degree 7. Amount of Wind: 120L/min(MAX) 8. Noises: <45dbSpecification: General Material Plastic, Metal Input Voltage AC 220V Rated Output Power 500W Package Weight One Package Weight 2.75kgs / 6.06lb One Package Size 23.5cm * 25cm * 14cm / 9.25inch * 9.84inch * 5.51inch Qty per Carton 4 Carton Weight 12.00kgs / 26.46lb Carton Size 52cm * 30cm * 26cm / 20.47inch * 11.81inch * 10.24inch Loading Container 20GP: 657 cartons * 4 pcs = 2628 pcs40HQ: 1526 cartons * 4 pcs = 6104 pcs

Leer Más Menos

LCD Screen Features1. Wide gamut(NTSC100%), high brightness(720nits), high saturation. 2. 56-channel TDDI touch panel, sensitive and accurate, easy to play all the big games. 3. Incell+COF mechanism, no grid lines, ultra-thin and narrow border, assemble perfect. 4. 170 degree super wide viewing angle, the black screen comparable to the original. 5. When you wear sunglasses and rotate 360 degrees, the display will not change color and darken. 6. The automatic production line makes product quality more stable and reliable.Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for iPhone 13 mini 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Certificate GPSR Compatible with Apple: iPhone 13 mini Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Leer Más Menos

1. Features the RP2350B microcontroller chip designed by Raspberry Pi.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.3. Built-in 520KB of SRAM and 16MB of on-chip Flash.4. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection of loads: 10A 250V AC or 10A 30V DC.6. Digital input with bidirectional optocoupler isolation, supporting passive and active digital inputs; relays support control in conjunction with switch inputs.7. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.8. On-board pin header interface for connecting other devices.9. On-board terminal block power interface, supporting a wide voltage range of 7~36V, convenient for industrial power supply.10. On-board RTC clock chip, supporting scheduled tasks.11. On-board W5500 Ethernet chip, extending 10/100Mbps network connectivity via SPI interface.12. PoE Ethernet port version supports external PoE modules for Power over Ethernet functionality (compliant with IEEE 802.3af standard).13. On-board optocoupler isolation to prevent high-voltage circuits connected to the relays from interfering with the control chip.14. On-board digital isolation to prevent external signals from interfering with the control chip.15. On-board integrated power isolation, providing stable isolated voltage; no additional power supply is required for the isolated end.16. On-board Micro SD card slot for external SD card storage of images or files.17. On-board buzzer, RGB LED, and power and RS485 transceiver indicator lights for easy monitoring of device operating status.18. DIN rail mountable ABS protective casing for easy installation and safer use.19. USB 1.1 host and device support.20. Supports low-power sleep and hibernation modes21. Can be recognized as a mass storage device via USB for drag-and-drop program download22. 15 multi-functional GPIO pins23. 2 SPI, 2 I2C, 2 UART, 8 12-bit ADCs, and 12 controllable PWM channels14. Precise on-chip clock and timers, temperature sensor, on-chip accelerated floating-point library15. 12 programmable I/O (PIO) state machines for custom peripheral support16. Built-in power isolation, optocoupler isolation and other protection circuits for safety, stability and reliability17. Dimensions: 175x90x40mmProduct parameters:- USB interface1. Interface type: USB Type-C2. Power supply voltage: 5V3. Functions: device power supply, USB communication and firmware download, etc.- Isolated communication Interface1. Interface type: RS4852. Interface form: terminal block3. Direction control: hardware automatic detection and control of data transmission direction4. Interface protection: provides TVS tube protection, surge and electrostatic protection5. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap- Digital Input1. Number of inputs: 8 channels2. Input voltage range: 5V ~ 36V3. Input type: passive input / active input (NPN type or PNP type)4. Isolation type: Bidirectional optocoupler isolation- Relay1. Number of channels: 8 channels2. Contact type: one normally open, one normally closed3. Isolation type: optocoupler isolation- Indicator lights1. RGB: colorful cool LED beads, customizable display color2. PWR: power indicator light, lights up red when USB is connected and voltage is detected3. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface4. RXD: receive indicator light, lights up when data is received from RS485 The blue light illuminates when the interface receives data.5. Power supply range: 7V ~ 36VSpecification: Package Weight One Package Weight 0.34kgs / 0.76lb One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 11.30kgs / 24.91lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs40HQ: 1212 cartons * 30 pcs = 36360 pcs

Leer Más Menos

LCD Screen Features1. Ultra Retina XDR display 2. Tandem OLED 3. 2752-by-2064 resolution at 264 ppi 4. SDR brightness: 1000 nits max 5. XDR brightness: 1000 nits max full screen, 1600 nits peak (HDR content only) 6. Fingerprint-resistant oleophobic coating 7. Fully laminated 8. Antireflective coating 9. ProMotion technology 10. Wide color (P3) 11. True Tone 12. Pencil hoverBefore Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display + touch screen digitizer assembly for iPad Pro 11 2024 A2836 A2837 A3006. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Apple: iPad Pro 11 (2024) Package Weight One Package Weight 0.63kgs / 1.39lb One Package Size 35cm * 26cm * 7cm / 13.78inch * 10.24inch * 2.76inch Qty per Carton 14 Carton Weight 9.40kgs / 20.72lb Carton Size 54cm * 37cm * 37cm / 21.26inch * 14.57inch * 14.57inch Loading Container 20GP: 360 cartons * 14 pcs = 5040 pcs40HQ: 837 cartons * 14 pcs = 11718 pcs

Leer Más Menos

1. Material: ABS+PP+componentes electrónicos 2. Engranaje de velocidad del viento: 2 marchas 3. Tiempo de carga: 2 horas 4. Tiempo de continuidad: 1-1,5 horas 5. Capacidad de la batería: 400 mAh 6. Voltaje/potencia: DC5V/1.5W 7. Tamaño: aproximadamente 11 x 7,3 x 8,5 cm Características: 1. Suave y silencioso, carcasas de sonido pequeñas y gran volumen de aire, lo acompañan en los días frescos de verano, compacto y portátil. 2. Mueva el interruptor en la parte posterior, se pueden ajustar dos velocidades de viento como desee, ángulo ajustable, disfrute multidireccional de frescura. 3. Carga USB, de larga duración, no es necesario reemplazar la batería con frecuencia, al cargar, el interruptor debe colocarse en APAGADO Especificación: Peso del paquete Peso de un paquete 0,12 kg/0,27 lb Un tamaño de paquete 13 cm * 10 cm * 10 cm / 5,12 pulgadas * 3,94 pulgadas * 3,94 pulgadas Cantidad por caja 60 Peso de la caja 8,30 kg/18,30 lb Tamaño de la caja 50 cm x 42 cm x 32 cm (19,69 pulgadas x 16,54 pulgadas x 12,6 pulgadas) Contenedor de carga 20GP: 396 cajas * 60 uds. = 23760 uds. 40HQ: 921 cajas * 60 piezas = 55260 piezas

Leer Más Menos

1. PMX55 001-00 baseband power management IC chip replacement For iPhone 12 / 12 Pro / 12 Pro Max / 12 Mini. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts. Specification: General Compatible with Apple: iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1200 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 27cm * 32cm / 16.54inch * 10.63inch * 12.6inch Loading Container 20GP: 734 cartons * 1200 pcs = 880800 pcs40HQ: 1705 cartons * 1200 pcs = 2046000 pcs

Leer Más Menos