Resultados de la búsqueda de "led light accessories"

1. Resolution: 1920x10802. Voice system: two-way voice intercom3. Viewing angle: 166 degrees4. Night vision lights: 6 850nm Infrared LEDs5. Storage function: 16G/32G/64G/128G SD Card/Cloud Storage (Supports 128G memory card, memory card not included in shipment)6. Active wake-up: remote wake-up, PIR wake-up, device button wake-up7. Megapixel high-definition pixels, combined with infrared night vision function, clearly visible even in the dark8. PIR human body sensor, takes a picture and pushes it to the mobile phone when a human body is detected9. Built-in microphone supports two-way intercom function10. Supports remote wake-up, PIR wake-up, button wake-up, and fast push to mobile app11. Supports high-definition video recording, video playback, etc.12. Dimensions: 65x150x35mm13. Weight: 125g14. Note: batteries are not included in the shipment; please provide your own 18650 batteries (2 pieces).Complete accessories:- Doorbell x 1- Screw pack x 1- Adhesive backing x 1- Charging cable x 1- English/Japanese instruction manual x 1Specification: Package Weight One Package Weight 0.21kgs / 0.46lb One Package Size 17cm * 8cm * 7cm / 6.69inch * 3.15inch * 2.76inch Qty per Carton 32 Carton Weight 7.70kgs / 16.98lb Carton Size 36cm * 34cm * 30cm / 14.17inch * 13.39inch * 11.81inch Loading Container 20GP: 726 cartons * 32 pcs = 23232 pcs40HQ: 1685 cartons * 32 pcs = 53920 pcs

Leer Más Menos

Projection Parameters1. Display Technology: LCD2. Light Source: LED3. Color Temperature: 6500K4. Light Source Life: 30,000 hours5. Light Luminance: 150 ANSI (+/-10%)6. Lamp Type: LED7. Contrast Ratio: 0.65:18. Standard Resolution: 1280x720 / 60Hz9. Supported Resolution: 1080x1920 / 60Hz10. Contrast Ratio: 1200:111. Projection Area: 18-200 inches12. Picture Scale: 4:3 / 16:913. Optimal Size: 18-200 inches14. Luminance Uniformity: 80%15. Projection Distance: 0.5-3M16. Focus Mode: Automatic focusing17. Keystone Correction: Automatic correction18. Projection Mode: Hoisting / Front / Rear Project19. Speaker: Built-in Box Speaker (4ohm 5W x 1)Connector Details1. USB Port: Standard USB 2.0 x 12. HDMI Port: Standard HDMI x 13. Audio Output: Standard 3.5mm Audio Jack x 14. Power Port: Type-C (Supports 100-250V, 50/60Hz)5. Power Buttons: 1 x Power KeyOperating System1. CPU: Allwinner 727 (Quad-core Cortex-A53, 1.6GHz)2. GPU: Mali-G313. Video Decoding: 8K 24Hz4. System Version: Android 145. Memory: 1GB + 8GB6. Keystone Correction: Hard decoding trapezoid7. HDMI Support: HDMI 2.0, supports HDCP 1.4/2.28. HDMI Delay: Open trapezoid delay 40-50ms, close trapezoid delay 4ms9. WiFi Network Support: 802.11 b/g/n + BT5.4 WiFi6, 2.4G+5G+6G dual WiFi modes10. Remote Control: Infrared remote control / Bluetooth remote controlFile Formats:1. Video DecodingH.265: MP/L5.0, 4K 60fps 10-bitH.264: BP/MP/HP Level 5.1, 4K 30fps 8-bitVP9: Profile 2, 4K 60fps 10-bitAVS2: JiZhun, 1080p 60fpsAVS/AVS+: JiZhun, 1080p 60fpsVP8: N/A, 1080p 60fpsMPEG1: MP/HL, 1080p 60fpsMPEG2: MP/HL, 1080p 60fpsMPEG4: SP/ASP, 1080p 60fpsXVID: N/A, 1080p 60fpsH.263: BP, 1080p 60fpsSorenson Spark: N/A, 1080p 60fpsVP6: 6.0/6.1/6.2, 720p 30fpsMJPEG: N/A, 1080p 60fps2. Audio Support: MP3, AVI, ASF, WMV, WMA, DivX, Matroska, 3GPP, MP4, M4A, MPEG, DAT, VOB, MPG, TS, TRP, TP, FLV, WAV, AC3, EAC3, AAC, RM, RMVB, RA, WebM3. Image Support: JPG, JPEG, BMP, PNG4. File Support: TXT, EPUB, PDF, WORD, EXCEL, POWERPOINTStandard Accessories1. Adapter: Type-C interface, supports PD protocol,1.2m AC cable x 12. HDMI Cable: 1m HDMI cable x 1Product Appearance1. Dimensions: 138 x 138 x 153 mm2. Net Weight: 0.67 kg3. Power: 45 W +/- 5 WSpecification: Package Weight One Package Weight 1.10kgs / 2.43lb One Package Size 23cm * 18cm * 18cm / 9.06inch * 7.09inch * 7.09inch Qty per Carton 12 Carton Weight 14.00kgs / 30.86lb Carton Size 54cm * 47cm * 37cm / 21.26inch * 18.5inch * 14.57inch Loading Container 20GP: 283 cartons * 12 pcs = 3396 pcs40HQ: 659 cartons * 12 pcs = 7908 pcs

Leer Más Menos

LED indicator status description:1. The left power light-always on: normal power2. The middle GPS light flashes: searching for GPS signals3. The middle GPS light is always on: GPS signal is normal4. The GSM light on the right flickers: searching for GSM signals5. GSM on the right side is always on: the GSM signal is normal and the card has been readProduct parameter specifications:1. Dimensions: 63mm x 46mm x 17mm2. Weight: 40 grams3. Network: GSM/GPRS4. Network frequency band: 850/900/1800/1900Mhz5. Chip: UBLOX6. GPS sensitivity: -159dBm7. GPS accuracy: 5 meters8. Battery: 3.7V 180 mAhFunctional advantages:1. Add shift alarm and alarm in electronic fence area2. Add smart power saving mode3. Add oil and power off, ACC status notification function, low power/power off alarm4. Blind zone supplementary transmission function, when there is no mobile phone signal, the data is saved in GPS, and will be supplemented when there is a signal5. AGPS function, fast satellite positioningBasic configuration: host, power cord, manual, double-sided stickersSpecification: General Certificate CE, ROHS Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 7cm * 3cm / 3.94inch * 2.76inch * 1.18inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs

Leer Más Menos

Projection Parameters1. Display Technology: LCD2. Light Source: LED3. Color Temperature: 6500K4. Light Source Life: 30,000 hours5. Light Luminance: 150 ANSI (+/-10%)6. Lamp Type: LED7. Contrast Ratio: 0.65:18. Standard Resolution: 1280x720 / 60Hz9. Supported Resolution: 1080x1920 / 60Hz10. Contrast Ratio: 1200:111. Projection Area: 18-200 inches12. Picture Scale: 4:3 / 16:913. Optimal Size: 18-200 inches14. Luminance Uniformity: 80%15. Projection Distance: 0.5-3M16. Focus Mode: Electronic focusing17. Keystone Correction: Electronic correction18. Projection Mode: Hoisting / Front / Rear Project19. Speaker: Built-in Box Speaker (4ohm 5W x 1)Connector Details1. USB Port: Standard USB 2.0 x 12. HDMI Port: Standard HDMI x 13. Audio Output: Standard 3.5mm Audio Jack x 14. Power Port: Type-C (Supports 100-250V, 50/60Hz)5. Power Buttons: 1 x Power KeyOperating System1. CPU: Allwinner 727 (Quad-core Cortex-A53, 1.6GHz)2. GPU: Mali-G313. Video Decoding: 8K 24Hz4. System Version: Android 145. Memory: 1GB + 8GB6. Keystone Correction: Hard decoding trapezoid7. HDMI Support: HDMI 2.0, supports HDCP 1.4/2.28. HDMI Delay: Open trapezoid delay 40-50ms, close trapezoid delay 4ms9. WiFi Network Support: 802.11 b/g/n + BT5.4 WiFi6, 2.4G+5G+6G dual WiFi modes10. Remote Control: Infrared remote control / Bluetooth remote controlFile Formats:1. Video DecodingH.265: MP/L5.0, 4K 60fps 10-bitH.264: BP/MP/HP Level 5.1, 4K 30fps 8-bitVP9: Profile 2, 4K 60fps 10-bitAVS2: JiZhun, 1080p 60fpsAVS/AVS+: JiZhun, 1080p 60fpsVP8: N/A, 1080p 60fpsMPEG1: MP/HL, 1080p 60fpsMPEG2: MP/HL, 1080p 60fpsMPEG4: SP/ASP, 1080p 60fpsXVID: N/A, 1080p 60fpsH.263: BP, 1080p 60fpsSorenson Spark: N/A, 1080p 60fpsVP6: 6.0/6.1/6.2, 720p 30fpsMJPEG: N/A, 1080p 60fps2. Audio Support: MP3, AVI, ASF, WMV, WMA, DivX, Matroska, 3GPP, MP4, M4A, MPEG, DAT, VOB, MPG, TS, TRP, TP, FLV, WAV, AC3, EAC3, AAC, RM, RMVB, RA, WebM3. Image Support: JPG, JPEG, BMP, PNG4. File Support: TXT, EPUB, PDF, WORD, EXCEL, POWERPOINTStandard Accessories1. Adapter: Type-C interface, supports PD protocol,1.2m AC cable x 12. HDMI Cable: 1m HDMI cable x 1Product Appearance1. Dimensions: 138 x 138 x 153 mm2. Net Weight: 0.67 kg3. Power: 45 W +/- 5 WSpecification: Package Weight One Package Weight 1.10kgs / 2.43lb One Package Size 23cm * 18cm * 18cm / 9.06inch * 7.09inch * 7.09inch Qty per Carton 12 Carton Weight 14.00kgs / 30.86lb Carton Size 54cm * 47cm * 37cm / 21.26inch * 18.5inch * 14.57inch Loading Container 20GP: 283 cartons * 12 pcs = 3396 pcs40HQ: 659 cartons * 12 pcs = 7908 pcs

Leer Más Menos

1. Input voltage: 6.5-36V (the input voltage is lower than 6.5V, the current accuracy is inaccurate, and the LCD display is abnormal if it is lower than 5.5V)2. Output voltage: 1.2-32V, the default output is 5V step-down type, the output voltage can only be lower than the input voltage, and the voltage difference is more than 2V3. Output current: It can work stably at 3.5A for a long time, and it can reach about 4.5A with fan enhanced heat dissipation (adjustable limit current can reach about 4.2-4.5A)4. Output power: natural heat dissipation 50W (within 3.5A), plus fan to enhance heat dissipation 75W5. Voltage display: resolution 0.05V, range 1.2-32V6. Current display: resolution 0.005A, range 0-4.5A7. Conversion efficiency: about 94%, depending on the voltage difference and current efficiency8. Working current: about 30mA9. Input reverse polarity protection: yes10. Anti-backflow at the output: no (if charging the battery, first power on the module and then connect the battery, and ensure that the battery voltage is lower than the output voltage; if possible, connect an anti-backflow diode in series with the output positive pole)11. Short circuit protection: yes12. Size: about 70.5x48.4x28mm13. Weight: about 65g Features:1. Crystal shell, beautiful design, good touch texture of buttons, and output voltage set by button2. The button can control the output to turn off and on, and can set the power-on default to ON or OFF3. LCD can display input and output voltage, output current and output power4. The input terminal is protected against reverse connection, and the reverse connection will not burn5. High efficiency, high current, low heat generation, constant current value can be adjusted around 0-4.5A, suitable for office power supply, high-power LED constant current drive, lithium battery charging, etc.Function Description:1. There are IN/OUT and ON/OFF buttons on the left side of the module: the IN/OUT button switches the display of input voltage and output voltage, long press to switch the display of output current and output power; the ON/OFF button controls the output ON or OFF, long press Press to set the default output state is ON or OFF at the next power-on2. There are +/- two buttons on the right side of the module: + button press the output voltage to increase 0.05V, long press to continuously increase, and then long press to continuously increase 0.1V, 1V in slow steps; - button press the output voltage Decrease 0.05V, long press to continuously decrease, and then long press to continuously decrease 0.1V, 1V in slow steps3. ADJ-I is the current setting potentiometer. Turn clockwise to increase the set current. When the load current reaches the set current, it enters the constant current state, and the CC constant current indicator (red) lights up. The OUT indicator is the output status indicator, it is on when there is voltage at the output terminal, otherwise it is off; the CHAR indicator is the charging indicator, which is on when charging, and the FULL indicator is the full indicator. If the set constant current value is 2A, charging When the current reaches below 0.2A, turn the light, the FULL indicator is on, and the CHAR indicator is offInstructions:1. Use as an ordinary step-down module with overcurrent protection capability- Press the button to set the output voltage to the desired voltage value- Rotate the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (connect the two test leads directly to the output terminal), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the overcurrent protection value you want to set. (For example, the current value displayed by the multimeter is 2A, then the current can only reach 2A when the module is used, and the red constant current indicator light is on when the current reaches 2A, otherwise the indicator light is off) 2. Use as a battery charger- The module without constant current function cannot be used to charge the battery. Because the voltage difference between the exhausted battery and the charger is very large, the charging current is too large and the battery is damaged, so the battery should be used at the beginning. Constant current charging, when the charging reaches a certain level, it will automatically switch back to constant voltage charging- Determine the float voltage and charging current of the battery to be recharged; (if the lithium battery parameter is 3.7V/2200mAh, then the float voltage is 4.2V, and the charging current can reach 1C, that is, 2200mA)- Under no-load conditions, the output voltage of the button reaches the floating charge voltage; (if charging a 3.7V lithium battery, adjust the output voltage to 4.2V)- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined charging current value- Connect the battery and charge (when setting: no battery is connected to the output terminal)3. Used as a high-power LED constant current driver module- Determine the operating current and operating voltage needed to drive the LED- Under no-load conditions, press the button to set the output voltage to reach the LED working voltage- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined LED operating current- Connect the LED, test the machine (when setting: output no-load, do not connect the LED light) Precautions: 1. It is forbidden to short-circuit the input IN- of the module with the output OUT-, otherwise the constant current function will fail 2. Make sure that the power of the power supply is always greater than the power required by the output load. When the module is seriously hot, please reduce the power usage.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs40HQ: 412 cartons * 404 pcs = 166448 pcs

Leer Más Menos

1. Material: aluminum alloy, ABS2. Fixed parts: water cup holder, door storage box3. Applicable scenarios: car, living room, office, etc.4. Power supply: contains a button battery5. Features: the top is equipped with LED lights, high-brightness lamp beads, convenient for night use, aluminum alloy frosted texture, comfortable touch, wear-resistant and durable6. Weight: about 250 grams7. Size: about 7.5x9 cmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 10cm * 9cm * 9cm / 3.94inch * 3.54inch * 3.54inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 46cm * 41cm * 41cm / 18.11inch * 16.14inch * 16.14inch Loading Container 20GP: 344 cartons * 98 pcs = 33712 pcs40HQ: 800 cartons * 98 pcs = 78400 pcs

Leer Más Menos

1. Material: ABS2. Size: about 9x6.7x3.74 cm3. Weight: about 78 grams4. Input: AC 100-240V 50/60Hz5. Output: 9V Ni-MH battery 9V DC 50mAx1, 50mAx2, 9V lithium battery 9V DC 120mAx1, 120mAx26. Applicable battery: 9V lithium battery/NiMH/NiCd rechargeable battery7. Features: automatic power off when fully charged, LED light to indicate the charging process, automatic light off when fully charged, smart chip, over-current protection, over-temperature protection (when the battery or charger temperature is higher than 60 degrees Celsius when charging, the charging will stop automatically) to ensure safety Charging, exquisite and compact, easy to carry, simple operation8. Note: Only the charger, not the battery in the pictureSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 7cm * 5cm / 3.94inch * 2.76inch * 1.97inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 42cm * 37cm * 52cm / 16.54inch * 14.57inch * 20.47inch Loading Container 20GP: 330 cartons * 100 pcs = 33000 pcs40HQ: 766 cartons * 100 pcs = 76600 pcs

Leer Más Menos

1. Material: ABS, ceramic2. Scope of application: models with cup holders3. Power supply: 2030 button battery4. Battery voltage: 3V5. Battery power: 0.63W6. Size: N18A is about 8.3x7.4 cm, N18B is about 7.6x7.4 cm7. Weight: about 205 gramsFeatures:1. Frosted cup body with electroplating decoration, beautiful and exquisite2. Easy to open and close with one hand, easy to use3. Built-in LED breathing light, enhance the night atmosphere, automatically turn on the light when the lid is opened, the colorful gradient is not monotonous4. Separate design, easy to disassemble and clean5. Stainless steel cigarette holder design, easy to take and place6. Ceramic flame-retardant liner, safe and durable, washable and corrosion-resistant7. EPE foam cotton sealing ring, tightly closed and sealed, flame retardant and no ashSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 9cm * 8cm * 8cm / 3.54inch * 3.15inch * 3.15inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 41cm * 37cm * 37cm / 16.14inch * 14.57inch * 14.57inch Loading Container 20GP: 475 cartons * 98 pcs = 46550 pcs40HQ: 1102 cartons * 98 pcs = 107996 pcs

Leer Más Menos

1. There is a switch, choose the proper voltage before use. 2. AC input: 110/220V input voltage by switch. 3. Protection: Shortage protection, overload protection, over-voltage 4. Wide input voltage range, steady and precise output voltage. Great power transformer for electronic equipment, Led Lighting, home appliance etc.Specification: General Certificate ROHS, FCC, EMC, LVD Material Metal Input Voltage 110/220V Output Voltage DC 0-24V Output Current 16.5A Product Size 21.3*11.3*5cm Product Weight 904g Package Weight One Package Weight 0.98kgs / 2.16lb One Package Size 22cm * 12cm * 6cm / 8.66inch * 4.72inch * 2.36inch Qty per Carton 20 Carton Weight 21.00kgs / 46.30lb Carton Size 46cm * 26cm * 32cm / 18.11inch * 10.24inch * 12.6inch Loading Container 20GP: 696 cartons * 20 pcs = 13920 pcs40HQ: 1617 cartons * 20 pcs = 32340 pcs

Leer Más Menos

1. Easy to install, the plug has switches, which greatly simplifies the installation process of LED lighting system2. Adopt cable-specific insulation PVC material, soft wire body, good bending, and aging resistance3. Small and portable, easy to carry around for use outside4. Sturdy switches, firm docking equipment, anti-electric shock design, safe and durable5. For security/surveillance/camera head/router/switch/broadband cat and other equipment 5.5 x 2.1mm DC power input switch control6. Specifications: 5.5mm x 2.1mm7. Material: injection molding PVC8. Size: about 30cmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 152 Carton Weight 7.00kgs / 15.43lb Carton Size 40cm * 34cm * 32cm / 15.75inch * 13.39inch * 12.6inch Loading Container 20GP: 612 cartons * 152 pcs = 93024 pcs40HQ: 1422 cartons * 152 pcs = 216144 pcs

Leer Más Menos

1. Comes with two 8-pin telescopic cables, 0.8m independent stretching, can be used on both front and rear seats2. Equipped with 27W PD fast charging interface, stable charging, 4 times faster3. The compact size is installed on the edge of the card position, and can be moved horizontally without affecting the use of the sliding cover and storage box4. Satisfying the simultaneous connection and use of multiple ports, entertainment and charging are correct5. Embedded installation, high fit, and the central control as one6. LED atmosphere lights, sensing vehicle start, automatically turn on the lights, creating a comfortable atmosphere7. Compatible models: Suitable for Tesla Model 3 / Y central control docking stationParameter:1. Material: ABS2. Input: DC 9V3. 8 Pin output: one PD (MAX 27W), one 12W4. USB output: 2.4A5. Dimensions: 196 x 85 x 31mm6. Line length: 0.8 metersSpecification: General Compatible with Tesla: Model Y, Model 3 Package Weight One Package Weight 0.35kgs / 0.76lb One Package Size 24cm * 14cm * 5cm / 9.45inch * 5.51inch * 1.97inch Qty per Carton 92 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 92 pcs = 16284 pcs40HQ: 412 cartons * 92 pcs = 37904 pcs

Leer Más Menos

1. Input: DC12V-24V2. PD3.0 output 20W: 5V/3A, 9V/2.2A, 12V/1.67A.3. QC3.0 USB output: 5V/3A, 9V/2A, 12V/1.5A4. Total power: 38W.5. Support fast charging: support PD3.0+QC3.0 dual protocols.6. With indicator light: blue led indicator light, convenient for use when the brightness is not enough or at night.7. Applicable: It can be used for smart charging of mobile phones and tablets of all brands such as iPhone series, iPad series, Samsung, Huawei, Xiaomi, etc.8. Type-C line parameters: the line is 1m long, supports 3A fast charging+480Mbps data transmission, and can be used for smart charging of mobile phones and tablets with Type-C interface.Package contains:1 x Dual fast charging car charger1 x 1m USB to Type-C cableSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 12cm * 7.4cm * 3.5cm / 4.72inch * 2.91inch * 1.38inch Qty per Carton 500 Carton Weight 29.00kgs / 63.93lb Carton Size 90cm * 58cm * 29cm / 35.43inch * 22.83inch * 11.42inch Loading Container 20GP: 176 cartons * 500 pcs = 88000 pcs40HQ: 408 cartons * 500 pcs = 204000 pcs

Leer Más Menos