Resultados de la búsqueda de "arduino"

1. The ESP32-S3-Touch-LCD-1.83 is a high-performance, highly integrated microcontroller development board. 1. In a compact form factor, the board integrates a 1.83-inch capacitive LCD screen, a highly integrated power management chip, a six-axis sensor (three-axis accelerometer and three-axis gyroscope), RTC, and a low-power audio codec chip, facilitating development and embedding into products.2. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, with a clock speed up to 240MHz.3. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna.4. Built-in 512KB SRAM and 384KB ROM, stacked 8MB PSRAM and external 16MB Flash.5. Uses a Type-C interface, improving user convenience and device compatibility.6. Onboard 1.83-inch capacitive touch LCD screen, 240 × 284 resolution, 65K colors.7. Built-in ST7789P driver chip and CST816D capacitive touch chip, communicating via SPI and I2C interfaces respectively, without occupying excessive interface pins.8. Onboard QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture, step counting, and other functions.9. Onboard PCF85063 RTC chip, connected to the battery via AXP2101 for uninterrupted power supply.10. Onboard PWR and BOOT side buttons with customizable functions, facilitating custom function development using the buttons.11. Onboard JST 1.2mm lithium battery charging and discharging interface.12. Provides 1 I2C, 1 UART, and 1 USB solder pads for external devices and debugging, allowing flexible configuration of peripheral functions.13. Onboard micro SD card slot, supporting storage expansion and fast data transfer, facilitating data recording and media playback functions, and simplifying system circuit design.14. AXP2101 provides efficient power management solutions, supports multiple configurable voltage outputs, integrates charging and battery management functions, and helps extend battery life.15. High touch screen transmittance, fast response, and long lifespan16. Display panel: IPS17. Display size: 1.83 inches18. Display resolution: 240 x 284 pixels19. Display colors: 65K20. Display brightness: 300 cd/㎡21. Contrast ratio: 1200:122. Communication interface: SPI23. Driver IC: ST7789P24. Touch control: supported25. Touch control IC: CST816DSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 192 Carton Weight 20.30kgs / 44.75lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 192 pcs = 88512 pcs40HQ: 1071 cartons * 192 pcs = 205632 pcs

Leer Más Menos

LCD screen parameters:1. Display panel: LCD2. Display size: 3.49 inches3. Display resolution: 172 x 6404. Display colors: 16.7M5. Display brightness: 350 cd/m26. Contrast ratio: 1200:17. Display Interface: QSPI8. Driver chip: AXS15231B9. Touch interface: I2C10. Touch type: capacitive sensing11. Size: model A about 9.269 x 3.48 x 3.18cm, model B about 9.269 x 3.48 x 2.28cmFeatures:1. Powered by ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, clocked up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Incorporates 512KB SRAM and 384KB ROM, with 8MB PSRAM stacked and external 16MB Flash4. Onboard 3.49-inch capacitive touch HD IPS display, 172 × 640 resolution, 16.7M colors, clearly displays color images5. Equipped with dual microphone array, enabling audio algorithms like noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications6. Integrated AXS15231B display driver IC communicating via QSPI and I2C interfaces7. Onboard QMI8658 six-axis IMU (3-axis accelerometer, 3-axis gyroscope) for detecting device orientation and step counting8. On-board PCF85063 RTC chip for convenient implementation of real-time clock functionality9. Two customizable side buttons (PWR, BOOT) for developing user-defined functions10. On-board 3.7V MX1.25 lithium battery charge/discharge interface or 18650 battery holder11. Onboard Micro SD card slot for flexible storage expansion and rapid data transfer, suitable for data logging and media playback, simplifying circuit design12. Reserved 22-pin 2.54mm pitch through-hole pads for connecting external modules or functional expansion, enhancing development flexibilitySpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 28.00kgs / 61.73lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs40HQ: 958 cartons * 90 pcs = 86220 pcs

Leer Más Menos

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs40HQ: 1155 cartons * 216 pcs = 249480 pcs

Leer Más Menos

Features1. Comes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, supports 5G NSA and SA networking, supports multi-mode multi-band 2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS 3. Operating system support: Windows/Linux/Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series 6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas 10. 2x SIM card slot, dual card single standby, switchable via AT command 11. Onboard audio jack and audio decoder, allows audio operation like making phone call 12. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. Sub-6G (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 2. Sub-6G (NSA): n41, n77, n78, n79 3. LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 4. LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 5. WCDMA: B1, B2, B3, B4, B5, B8 6. GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS Data rate 1. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL) 2. LTE: 1 Gbps (DL) / 200 Mbps (UL) 3. HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) Software functions 1. Operating systems: Windows/Linux/Android 2. Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 3. SMS: Supports MT, MO, CB, Text, PDU 4. Firmware upgrade: Supports firmware upgrade via USB port Applications 1. Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. 2. Application examples: CPE, Smart gateway, Drone, Live streaming, Remote treatment, Intelligent securityPackage List1. M.2 TO 4G/5G HAT x1 2. SIM8202G-M2 x1 3. Antenna 4pcs x1 4. IPEX adapter cable 4pcs x1 5. 2 x 20PIN pin header x1 6. Passive GPS antenna x1 7. Dual plug USB3.0 cable x1 8. USB 3.0 adapter x1 9. USB 2.0 adapter x1 10. SMA protective cap 4pcs x1 11. Screws pack x1Specification: Package Weight One Package Weight 0.34kgs / 0.74lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs

Leer Más Menos

1. This product is an AI development board based on ESP32-S3, integrating camera interface (DVP), SPI/QSPI display interface, and audio capture and playback functions, balancing low cost, high performance, and low power consumption to meet diverse smart terminal development needs. It supports integration with online AI platforms such as Xiaozhi/Doubao/DeepSeek, enabling human-computer interaction functions like voice dialogue and Q&A recognition. It also provides an Edge Impulse object detection example supporting real-time and multi-object recognition, suitable for rapid development of AI voice interaction, edge vision detection, HMI screen applications, and smart camera products. 2. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a maximum main frequency of 240MHz. 3. Built-in 512KB SRAM, 384KB ROM, onboard 8MB PSRAM and 16MB Flash. 4. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication with excellent RF performance. 5. Dual microphone array supporting noise reduction and echo cancellation for high-quality voice interaction. 6. Expansion and interfaces: --SPI/QSPI LCD display interface --24PIN DVP camera interface --USB, I2C, and UART interfaces accessible. 7. Onboard lithium battery charging circuit supports 3.7V lithium battery power supply. 8. Reserved 2 user-defined buttons. 9. The overall solution is highly integrated with rich interfaces, suitable for rapid prototyping and application deployment of AIoT smart terminal products.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 12.60kgs / 27.78lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs40HQ: 1354 cartons * 96 pcs = 129984 pcs

Leer Más Menos

AMOLED screen specifications1. Display panel: AMOLED2. Display size: 1.75 inches3. Display resolution: 466 x 466 pixels4. Display colors: 65K5. Display brightness: 700 cd/㎡6. Contrast ratio: 100000:17. Communication interface: QSPI8. Driver IC: CO53009. Touch: supported10. Touch IC: CST9217Product features1. Unique dual-core, dual-architecture design, featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.2. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM pad.3. Onboard 1.75-inch capacitive touch HD AMOLED screen. 1. Screen: 466 × 466 resolution, 65K color, capable of clearly displaying color images.2. Built-in CO5300 driver chip and CST9217 capacitive touch chip, using QSPI and I2C interfaces respectively for communication, minimizing interface pin usage.3. Onboard 3.7V MX1.25 lithium battery charging/discharging interface, beneficial for mobile applications.4. USB 1.1 master and slave device support.5. Supports low-power sleep and hibernation modes.6. Can be recognized as a mass storage device via USB for drag-and-drop program download.7. Five multi-functional GPIO pins.8. One SPI, two I2C, two UART, four 12-bit ADCs, and five controllable PWM channels.9. Precise on-chip clock and timers.10. Built-in temperature sensor for real-time chip temperature monitoring.11. Twelve programmable I/O (PIO) ports. 14. State machine for custom peripheral support.15. Employs AXP2101 for efficient power management, supports multiple voltage outputs, integrates charging and battery management functions, and optimizes battery life.16. Uses an AMOLED screen with higher contrast, wider viewing angles, richer colors, and faster response time, resulting in superior visual effects while offering advantages such as slim design, low power consumption, and flexibility.17. Compact panel for more touch possibilities, suitable for various smart device development, enabling human-computer interaction functions, and can operate independently with a battery.18. Onboard audio codec chip supports high-quality audio processing, providing clear and excellent audio input and output.Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 12.70kgs / 28.00lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs

Leer Más Menos

1. The ESP32-S3-Tiny is a compact microcontroller development board featuring a variety of digital interfaces. It employs a split-type design, allowing the USB and button circuits to be separated, reducing the overall PCB thickness and volume. Despite its ultra-compact form factor, it provides access to 34 GPIO pins, facilitating easier integration into projects.2. It utilizes the ESP32-S3 series as its main chip, equipped with a dual-core Xtensa 32-bit LX7 processor running at up to 240 MHz.3. It features stacked 4MB / 8MB Flash and 2MB / 8MB PSRAM, integrated 512KB SRAM, and 384KB ROM.4. It integrates dual-mode wireless communication with 2.4 GHz Wi-Fi and Bluetooth Low Energy (Bluetooth LE), offering excellent RF performance.5. The board includes an onboard FPC 8-pin interface, which can connect to a USB Type-C interface via an adapter board.6. 34 multi-functional GPIO pins of the ESP32-S3 are exposed.7. It boasts a rich set of peripheral interfaces, including SPI, I2C, UART, ADC, and PWM interfaces, enabling greater flexibility in implementing various functionalities.8. It supports multiple low-power operating states, allowing adjustment of the balance between communication range, data rate, and power consumption to meet the power requirements of diverse application scenarios.Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 160 Carton Weight 10.70kgs / 23.59lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 160 pcs = 93280 pcs40HQ: 1354 cartons * 160 pcs = 216640 pcs

Leer Más Menos

1. Features the RP2350B microcontroller chip designed by Raspberry Pi.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.3. Built-in 520KB of SRAM and 16MB of on-chip Flash.4. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection of loads: 10A 250V AC or 10A 30V DC.6. Digital input with bidirectional optocoupler isolation, supporting passive and active digital inputs; relays support control in conjunction with switch inputs.7. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.8. On-board pin header interface for connecting other devices.9. On-board terminal block power interface, supporting a wide voltage range of 7~36V, convenient for industrial power supply.10. On-board RTC clock chip, supporting scheduled tasks.11. On-board W5500 Ethernet chip, extending 10/100Mbps network connectivity via SPI interface.12. PoE Ethernet port version supports external PoE modules for Power over Ethernet functionality (compliant with IEEE 802.3af standard).13. On-board optocoupler isolation to prevent high-voltage circuits connected to the relays from interfering with the control chip.14. On-board digital isolation to prevent external signals from interfering with the control chip.15. On-board integrated power isolation, providing stable isolated voltage; no additional power supply is required for the isolated end.16. On-board Micro SD card slot for external SD card storage of images or files.17. On-board buzzer, RGB LED, and power and RS485 transceiver indicator lights for easy monitoring of device operating status.18. DIN rail mountable ABS protective casing for easy installation and safer use.19. USB 1.1 host and device support.20. Supports low-power sleep and hibernation modes21. Can be recognized as a mass storage device via USB for drag-and-drop program download22. 15 multi-functional GPIO pins23. 2 SPI, 2 I2C, 2 UART, 8 12-bit ADCs, and 12 controllable PWM channels14. Precise on-chip clock and timers, temperature sensor, on-chip accelerated floating-point library15. 12 programmable I/O (PIO) state machines for custom peripheral support16. Built-in power isolation, optocoupler isolation and other protection circuits for safety, stability and reliability17. Dimensions: 175x90x40mmProduct parameters:- USB interface1. Interface type: USB Type-C2. Power supply voltage: 5V3. Functions: device power supply, USB communication and firmware download, etc.- Isolated communication Interface1. Interface type: RS4852. Interface form: terminal block3. Direction control: hardware automatic detection and control of data transmission direction4. Interface protection: provides TVS tube protection, surge and electrostatic protection5. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap- Digital Input1. Number of inputs: 8 channels2. Input voltage range: 5V ~ 36V3. Input type: passive input / active input (NPN type or PNP type)4. Isolation type: Bidirectional optocoupler isolation- Relay1. Number of channels: 8 channels2. Contact type: one normally open, one normally closed3. Isolation type: optocoupler isolation- Indicator lights1. RGB: colorful cool LED beads, customizable display color2. PWR: power indicator light, lights up red when USB is connected and voltage is detected3. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface4. RXD: receive indicator light, lights up when data is received from RS485 The blue light illuminates when the interface receives data.5. Power supply range: 7V ~ 36VSpecification: Package Weight One Package Weight 0.34kgs / 0.76lb One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 11.30kgs / 24.91lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs40HQ: 1212 cartons * 30 pcs = 36360 pcs

Leer Más Menos

1. The RP2350A microcontroller chip designed with Raspberry Pi2. Unique dual-core, dual-architecture, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, with clock operating frequencies both reaching up to 150 MHz, supporting users to switch flexibly between the two architectures3. Built-in 520KB SRAM, on-board 16MB on-chip Flash4. Adopting Type-C interface, no need to worry about the front or back insertion5. Onboard 1.54-inch LCD screen, 240 x 240 resolution, 65K color6. USB1.1 host and slave device support7. Supports low-power sleep and hibernation mode8. Can be recognized as a large-capacity storage device for drag-and-drop program download via USB9. Exposed 4 multi-functional GPIO pins10. 1 I2C, 1 UART, 2 12-bit ADC, and 2 controllable PWM channels13. Precise on-chip clock and timer14. Built-in temperature sensor, capable of real-time monitoring of chip temperature15. 12 programmable I/O (PIO) state machines, used for custom peripheral supportLCD screen parameters1. Display panel: IPS2. Display resolution: 240 x 240 pixels3. Communication interface: 4-Wire SPI4. Touch type: capacitive sensing6. Display size: 1.54 inches7. Display colors: 65K8. Driving IC: ST77899. Touch IC: CST81610. Effective screen size: about 2.772 x 2.772 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs

Leer Más Menos

1. The ESP32-S3-RGB-Matrix is a high-performance, highly integrated LED matrix panel driver board. It is suitable for HUB75 interface RGB matrix panels and related embedded applications. Based on the ESP32-S3 microcontroller, it integrates large-capacity Flash storage, RTC chip, IMU, TF card slot, low-power audio codec chip, dual microphones, and so on. It also provides reserved interfaces such as USB, UART, I2C, and GPIO, offering strong scalability and enabling users to quickly develop and integrate it into practical applications.3. Supports 2.4 GHz Wi-Fi and Bluetooth 5 (BLE) dual-mode communication4. Includes 512KB SRAM and 384KB ROM; integrates 32MB Flash and 16MB PSRAM to meet storage requirements across various scenarios5. Compatible with the full range of Waveshare Matrix-RGB panel sizes; capable of smoothly running graphical interface programs like LVGL6. Onboard ES7210 echo cancellation chip for enhanced voice processing performance7. Onboard ES8311 low-power audio codec chip, supporting high-quality audio input and output8. Equipped with a dual-microphone array supporting noise reduction and echo cancellation algorithms; suitable for applications such as voice recognition and wake-up9. Onboard speaker interface for audio output; allows for direct connection to a speaker10. Integrates the QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for attitude detection11. Integrates the SHTC3 temperature and humidity sensor for precise environmental monitoring12. Onboard Micro SD card slot for storing images, audio, and various data files, facilitating easy data read/write operations13. Onboard PCF85063 RTC chip and reserved SH1.0 battery interface; supports timekeeping during power outages14. Reserved GPIO expansion interface for peripheral expansion and custom functionality, catering to diverse development needs15. Dual power supply interface design; supports stable operation of up to six 64×64 Matrix-RGB panels and allows for cascading expansion to meet large-format display requirements16. Onboard USB Type-C interface for power supply, programming, and debugging17. Onboard RST and BOOT buttons; the BOOT button supports custom functions, enhancing development flexibilitySpecifications:1. Power supply voltage: 5V2. Maximum current capacity: 10A3. Supported resolutions: 64 × 64 | 64 × 32 | 80 × 40 | 96 × 484. Interface type: HUB755. Maximum resolution (cascaded): 6 × 64 × 646. Operating temperature range: -40 ~ +85 degrees Celsius7. Product dimensions: 50 × 42 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 34cm * 42cm * 32cm / 13.39inch * 16.54inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs

Leer Más Menos

1. Powered by the RP2350 microcontroller chip developed by Raspberry Pi2. Features a unique dual-core, dual-architecture design, equipped with dual-core ARM Cortex-M33 processors and dual-core Hazard3 RISC-V processors; operates at clock speeds up to 150MHz and allows flexible switching between the two architectures3. Built-in 520KB SRAM and 16MB on-chip Flash4. Uses a USB Type-C interface for modern convenience—no need to worry about connector orientation5. Onboard 0.85-inch LCD screen with 128 × 128 resolution and 65K colors6. Supports USB 1.1 Host and Device modes7. Supports low-power sleep and dormant modes8. Recognized as a mass storage device via USB for drag-and-drop programming9. Includes 1x I2C, 1x UART, 2x 12-bit ADCs, and 2x controllable PWM channels10. Precise on-chip clock and timers11. Built-in temperature sensor for real-time chip temperature monitoring12. 12 Programmable I/O (PIO) state machines for custom peripheral supportLCD Screen Specifications:1. Operating voltage: 3.3V/5V2. Display size: 15.21 × 15.21 mm3. Resolution: 128 × 128 pixels4. Colors: 65K5. Panel type: IPS6. Pixel pitch: 39.6 × 118.8 μm7. Interface: 4-wire SPI8. Driver IC: ST7735Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs40HQ: 958 cartons * 144 pcs = 137952 pcs

Leer Más Menos

1. The breadboard is made of ABS plastic with black printed instructions, including color codes for each strip.2. The solderless breadboard features a self-adhesive tape strip on the back for easy attachment to any surface. The contact points are marked both horizontally and vertically.3. The solderless breadboard has 830 contacts, making it easy to quickly assemble electronic circuits.It is extremely easy to use, especially with DuPont multi-color jumper cables; no soldering is required; simply plug and unplug.4. Primarily designed for breadboard prototyping, it is compatible with Arduino projects, Raspberry Pi, single-board computers, LoveRPi kits, and other DIY projects. It is ideal for labs, industry, universities, schools, hobbies, or model making.5. It ensures uninterrupted circuit connections and is designed to resist failure under various conditions, providing safe and stable connections between components.6. Set includes an 830-hole breadboard, power supply, and 65 breadboard wires.Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 26cm * 19cm * 4cm / 10.24inch * 7.48inch * 1.57inch Qty per Carton 8 Carton Weight 2.40kgs / 5.29lb Carton Size 28cm * 21cm * 34cm / 11.02inch * 8.27inch * 13.39inch Loading Container 20GP: 1333 cartons * 8 pcs = 10664 pcs40HQ: 3096 cartons * 8 pcs = 24768 pcs

Leer Más Menos