Resultados de la búsqueda de "continuity tester"

Features:1. Add startup voltage detection function2. Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFETs, diodes (including dual diodes), thyristors, transistors, resistors and capacitors, etc.3. Automatically test pin elements and display on LCD4. Reference for transistors, MOSFET protection diodes, and amplification factors that can detect the forward bias voltage of the transistors emitter.5. Measure the gate threshold voltage and gate capacitance of the MOSFET6. 1602 liquid crystal display adopts LCD (12864 liquid crystal backlight)7. Fast test speed, effective component test: 2 seconds (except for large capacitors, it takes a long time to measure large capacitance, and the measurement time is one minute is normal)8. One-click operation, boot test, one-click acquisition9. Power consumption shutdown mode: less than 20 nA10. Automatic shutdown function to avoid unnecessary waste, save battery power and improve battery lifeSpecification:1. Two-button operation, automatic shutdown2. Only 20na off current3. Automatic detection of NPN, PNP bipolar transistors, N-channel and P-channel MOS field effect transistors, junction field effect transistors, diodes, diodes, thyristors, low power unidirectional and bidirectional thyristors4. Automatically identify component pin arrangement5. Measurement of Bipolar Transistor Current Amplification Factor and Base-Emitter Threshold Voltage6. Identification of Darlington transistor by base-emitter threshold voltage and large current amplification factor7. Detects bipolar and MOS transistor protection diodes8. Gate MOS FET threshold voltage and gate capacitance measurement9. Two resistances and resistance symbol display can be measured simultaneously. The decimal value shown on the right is 4. The resistance symbols on both sides show the number of pins. So you can measure the potentiometer. If the potentiometer wiper is not shifted to the extreme position, we can distinguish the middle and both ends of the needle10. Resistance measurement resolution is 0.1Ω, can measure 50MΩ11. Can measure 325pf-100mf capacitor with 1pf resolution12. 2uf more capacitors can measure equivalent series resistance at the same time. Two can be displayed as decimal values ??with a resolution of 0.01Ω13. The two diodes can be displayed with the diode symbol in the correct order, and the diode forward voltage can be given.14. The LED was detected as having a higher diode forward voltage. The combination of LEDs is identified as two diodes15. Can measure a single diode reverse capacitance. If the bipolar transistor is connected to the collector or emitter of the base and pins, the collector or emitter junction reverse capacitance can be measured16. Can be connected with single measurement rectifier bridgeSpecification: Package Weight One Package Weight 0.25kgs / 0.54lb One Package Size 18cm * 10cm * 6cm / 7.09inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 14.00kgs / 30.86lb Carton Size 41cm * 37cm * 50cm / 16.14inch * 14.57inch * 19.69inch Loading Container 20GP: 351 cartons * 50 pcs = 17550 pcs40HQ: 816 cartons * 50 pcs = 40800 pcs

Leer Más Menos

1. Can quickly detect whether your relay is normal, easy to use, suitable for automotive relays on the market, support 12V and 24V relay testing2. Most car lights, wipers, starters, air conditioners, electric seats, electric doors and windows, anti-lock brakes and audio use relays. Automotive relays are subject to vibration, high temperature, low temperature, humidity, etc., which will reduce their lifespan. However, once a relay fails, it will immediately cause system components to be paralyzed, and even cause the entire aircraft to be unusable. Therefore, it is very important to regularly check the relays in the car3. Through the continuous car battery to the relay coil, the detector can normally check the contact function of the relay4. The tester observes the contact data, closing time, relay inertia, etc. at each test stage5. Easy to operate, easy to carry, and durableOperation instructions:1. When testing, clamp the red clip to the positive pole of the battery and the black clip to the negative pole of the battery2. When testing a 12V relay, it needs to be connected to a 12V battery3. After connecting to the power supply, the device lights up red and the relay can be inserted4. To test the 4-pin relay, turn the switch to 4PIN, and to test the 5-pin relay, turn the switch to 5PIN5. After connecting the relay and adjusting the pin position switch, you can press the button6. If the pin position is incorrect or the relay is damaged during the test, the red LED light will be on7. When the pin position is set correctly, the tester will light up the green LED light and flash 10 times to indicate that the relay is normalSpecification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 19cm * 16cm * 4cm / 7.48inch * 6.3inch * 1.57inch Qty per Carton 32 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 34cm * 34cm / 15.75inch * 13.39inch * 13.39inch Loading Container 20GP: 576 cartons * 32 pcs = 18432 pcs40HQ: 1338 cartons * 32 pcs = 42816 pcs

Leer Más Menos

1. Pantalla: Pantalla LCD a color de 1,44 pulgadas 2. Rango de medición de voltaje: 4-24,00 V 3. Resolución de medición de voltaje: 0,01 V 4. Rango de medición de corriente: 0-4.000 A 5. Resolución de medición actual: 0,001 A 6. Rango de acumulación de capacidad: 0-99999 mAh 7. Precisión de medición de voltaje: +/- (0,2 % + 1 dígito) 8. Rango de almacenamiento de energía: 0-99999 mWh-999,99 Wh 9. Precisión de medición actual: +/- (0,8 % + 3 dígitos) 10. Rango de impedancia de carga: 0,8 ohmios a 9999,9 ohmios 11. Rango de medición de tiempo: 0-99 h 59 min 59 s 12. Rango de temperatura: -10 grados Celsius ~ 100 grados Celsius 13. Error de medición de temperatura: +/- 3 grados Celsius 14. Ajuste del brillo de la pantalla: nivel 0-5 15. Tiempo de apagado retardado: 0-9 minutos 16. Rango gráfico de voltaje: 4-24,00 V 17. Rango del gráfico de corriente: 0-4.000 A 18. Peso del producto: 22,87 g (UM34C)/18,39 g (UM34) (sin embalaje); 51,43 g (UM34C)/46,95 g (UM34) (incluido el embalaje) 19. Frecuencia de actualización: 2 Hz 20. Dimensiones: 71,2 mm x 30,5 mm x 12,4 mm (UM34C) / 71,2 mm x 30,5 mm x 11,3 mm (UM34) 21. Modo de reconocimiento de carga rápida: QC2.0, QC3.0, APPLE 2.4A / 2.1A / 1A / 0.5A, Android DCP, SAMSUNG 22. Puerto USB: puerto USB 3.0, compatible con teléfonos móviles OPPO VOOC, OnePlus DASH 23. Método de descarga de archivos: - Enlace de descarga del manual de usuario y la aplicación Android: http://www.mediafire.com/folder/5c877rc21tp1p/UM34 - Sistema operativo iOS: Busque la tabla UM en la tienda de aplicaciones iOS para descargarla - APP Android: Busca medidores UM en GooglePlay para descargar 24. Nota: - El puerto Tipo-C UM34C solo se usa para medir cables Tipo-C y no es compatible con todos los cargadores rápidos Tipo-C y cargadores PD; y no hay un disparador Tipo-C. - UM34 no es una versión de comunicación y no admite ningún tipo de comunicación entre PC y teléfono. - UM34C es la versión de comunicación conectada a través de Bluetooth. Y UM34C no tiene software para PC, solo aplicación Android. (El sistema Android de los teléfonos móviles de algunas marcas es un sistema personalizado y nuestra aplicación no es compatible, como Xiaomi, Nokia y otras marcas, así que descárguelo y pruébelo antes de comprarlo, y compre con cuidado) - APLICACIÓN móvil (Android 5.0 y superior, e IOS 8 y superior. Admite 18 idiomas, chino, inglés y ruso...) - Existen algunos problemas de incompatibilidad entre algunos teléfonos Android y nuestra placa Bluetooth, compre con cuidado, como por ejemplo para Samsung NOTE8 / S8 25. Para la aplicación Android e IOS: R: La aplicación solo es compatible con Android 5.0 y superior e iOS 8 y superior. B: Permitir que la aplicación se ejecute en segundo plano sin limpiarla. C: Permitir que la aplicación se inicie automáticamente. D: Una vez bloqueada la pantalla, la aplicación puede permanecer sin limpiar. Especificación: Peso del paquete Peso de un paquete 0,06 kg/0,14 lb Un tamaño de paquete 15 cm x 12 cm x 4 cm (5,91 pulgadas x 4,72 pulgadas x 1,57 pulgadas) Cantidad por caja 468 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 468 piezas = 82836 piezas 40HQ: 412 cajas * 468 piezas = 192816 piezas

Leer Más Menos

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Leer Más Menos

1. Material: ABS2. Battery: 6 AA batteries (not included)3. Short circuit current: 1.7mA/1.4mA4. Low battery voltage indication: the display shows5. Count: 1999 (MAX)6. Test voltage: 100V/250V/500V/1000V7. The total length of the lead wire: 91.5 cm8. The megohmmeter insulation tester is suitable for measuring the insulation resistance of various electrical equipment and insulating materials such as motors, cables, switches, electrical appliances, etc.9. Megohmmeter tester is suitable for maintenance, repair, testing and verification of various electrical equipment10. The rated output voltage can be used with function knob, MH10 is 100V, 250V, 500V, 1000V11. The LED light (HV ON) and the HV on the left side of the display indicate the high voltage output in the instrument and the danger of electric shock12. The measurement range of MH10 is 0.1-1999 milliohms, and the range can be changed manually13. Strong load capacity, output short-circuit current greater than 1.0mA14. The digital megger can measure AC voltage from 1V to 750V, and the frequency of AC voltage is 40Hz to 70Hz15. Appearance size: 160x125x85mm16. Weight: about 543.2 gramsSpecification: Package Weight One Package Weight 0.86kgs / 1.90lb One Package Size 22cm * 21cm * 9cm / 8.66inch * 8.27inch * 3.54inch Qty per Carton 20 Carton Weight 18.50kgs / 40.79lb Carton Size 46cm * 44cm * 47cm / 18.11inch * 17.32inch * 18.5inch Loading Container 20GP: 280 cartons * 20 pcs = 5600 pcs40HQ: 650 cartons * 20 pcs = 13000 pcs

Leer Más Menos

Features1. AC voltage detection pen, AC voltage measurement range is 12-1000V, 50/60HZ, easy to detect. 2. With high and low sensitivity switches, the sensitivity can be adjusted for flexible measurement. 3. It adopts humanized pen holder design, novel appearance, stable performance, safe and portable. 4. Non-contact measurement, when close to AC voltage within the specified voltage range, it will emit LED lights and beep. 5. Low power consumption, specially used for home circuit detection, suitable for electricians. 6. With flashlight, automatic shutdown function (about 3 minutes), it can continue to work in dark environments.Specification1. AC Voltage: 12V -1000V 2. Frequency: 50Hz/60Hz 3. Alarm Mode: Sound/Light/LCD Screen 4. Display: LCD Display Screen 5. Flashlight: Yes 6. High and Low Sensitivity Switch: Yes 7. AC Voltage Detect: Yes 8. Low Voltage Indicator: Yes 9. Auto Power-Off: Automatically shut down when there is no induction or operation for 3 minutes. 10. Battery type: 2 x 1.5V AAA Battery (not included) 11. Size: 167.45 x 26.30 x 21mm 12. Weight: 47.4g 13. Operating environment: 0-40 degree C, relative humidity: Less than or equal 95%. 14. Storage environment: -10-50 degree CSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 22cm * 10cm * 4cm / 8.66inch * 3.94inch * 1.57inch Qty per Carton 120 Carton Weight 8.50kgs / 18.74lb Carton Size 55cm * 47cm * 24cm / 21.65inch * 18.5inch * 9.45inch Loading Container 20GP: 429 cartons * 120 pcs = 51480 pcs40HQ: 997 cartons * 120 pcs = 119640 pcs

Leer Más Menos

1. Color: Blue2. Weight: 115g3. Dimensions: 85.5X49.6X20.3 mm4. Current: 0-100A resolution 0.01A continuous current 50A5. Voltage: 0-60V resolution 0.01V6. Capacity accumulation function: 0-65AH7. Power accumulation function: 0-6554WH8. At the same time, it has a voltage peak detection function, which can display the maximum detected voltage9. The two sides of the power meter are connected, and T plugs can be processedSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs

Leer Más Menos

1. The circuit, structure and technique of traditional earth resistance tester have been improved and the new design is both fine-looking and practical. 2. This one has more complete functions, higher accuracy, more convenient and reliable for operation and more suitable for outdoor use with dust and wet proof structure. 3. It can test earth resistance of various earth systems including power systems, electric equipments, lightning conductors as well as resistance value of low resistance conductor and AC voltage test. 4. Ground resistance measurements from 0.01???? to 2000???? with 0.01???? resolution. 5. Data hold, low battery warning. 6. Resistance: 0/20/200/2000 Ohm +/-(2%+3) 7. Voltage: 0-30V +/-(3%+5) 8. Resolution: 0.01 Ohm 7. Matched battery model: 1.5V(R6AA) battery x 6 12V(23A) battery x 1 Battery is not included in the accessorySpecification: General Certificate EMC, LVD Package Weight One Package Weight 1.94kgs / 4.27lb One Package Size 28cm * 22cm * 22cm / 11.02inch * 8.66inch * 8.66inch Qty per Carton 6 Carton Weight 12.21kgs / 26.92lb Carton Size 48cm * 42cm * 42cm / 18.9inch * 16.54inch * 16.54inch Loading Container 20GP: 314 cartons * 6 pcs = 1884 pcs40HQ: 731 cartons * 6 pcs = 4386 pcs

Leer Más Menos

1. Visualización de gráficos en pantalla a todo color 2. Decodificación infrarroja, calibración automática. 3. Modo de alimentación: batería de litio recargable 4. Operación con una tecla, detección y apagado automáticos, también puede presionar la tecla multifunción para apagar el detector. 5. Puede medir triodo, diodo, resistencia, capacitancia, inductancia, tiristor, tubo de efecto de campo, tubo regulador de voltaje, diodo doble, diodo emisor de luz, etc. 6. Una vez finalizada la detección, apunte el control remoto infrarrojo hacia la luz "IR" y presione el botón del control remoto. Si el detector decodifica correctamente, se mostrarán el código de datos y la forma de onda infrarroja. 7. Coloque el pin del componente en el área correspondiente y luego gire la manija pequeña, el detector realizará la prueba automáticamente y el resultado se mostrará claramente en la pantalla TFT retroiluminada. 8. Pantalla: Pantalla TFT de 3,5 pulgadas 9. Batería: 0,1-4,5 V 10. Resistencia: 0,01-50 Mohms 11. Capacitancia: 25pF-100mF 12. Inductancia: 0,01 mH-20 H 13. Rango del diodo: Menos de 4,5 V 14. Rango de triac: IGT menor a 6 mA 15. Área de detección del diodo Zener: 0,01-30 V 16. Tamaño: 8,8 x 8 x 2,8 cm 17. Peso: 111,5 g Especificación: Peso del paquete Peso de un paquete 0,13 kg/0,28 lb Un tamaño de paquete 15 cm x 12 cm x 3 cm (5,91 pulgadas x 4,72 pulgadas x 1,18 pulgadas) Cantidad por caja 80 Peso de la caja 10,00 kg/22,05 lb Tamaño de la caja 50 cm * 32 cm * 32 cm / 19,69 pulgadas * 12,6 pulgadas * 12,6 pulgadas Contenedor de carga 20GP: 520 cajas * 80 uds. = 41600 uds. 40HQ: 1209 cajas * 80 piezas = 96720 piezas

Leer Más Menos

1. Monitoring voltage: 4-28V2. Monitoring current: 0-7A3. Monitoring power: 0-120W4. D+/D- voltage: 0-3.3V5. Dimensions: 42x13x82mm6. Compatible with all interfaces, with 5P high-current USB-A, 24P all 7. Pin TYPE-C input and output interfaces, charging detection8. 2.0-inch LCD high-definition display, the measurement data is clearly visible9. 0.00001 low resolution, real-time detection of subtle changes in voltage, power and power during charging10. Support automatic protocol detection, PD2.0, PD3.0, PPS, QC2.0, QC3.0, QC4, FCP, SCP, AFC, PE, DASH VOOC, SuperVOOC, etc.11. Simple display interface, independent function menu, humanized operation12. Four functional curve display, cable detection13. 10 groups of energy records, battery capacity can be calculated by formula14. Driver-free installation, efficient and convenient data synchronization, Bluetooth APP overvoltage and overcurrent alarmSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 318 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 318 pcs = 56286 pcs40HQ: 412 cartons * 318 pcs = 131016 pcs

Leer Más Menos

1. Working voltage range: 5.0V-36V2. Balance port 1 string input voltage range: 0.8V-15V3. Balance port 2-8 series input voltage range: 0.8V-4.8V4. Support battery string number: 1-8S5. Voltage measurement accuracy: 0.005V @4.2V6. Cell balance accuracy: 0.005V7. Support USB charging: QC 2.0/3.0 BC1.2, 12/2A (MAX)8. Support smart battery: set charging and anti-power parameters, query battery information and usage9. Supported battery types:- LiHv (1-8S)/LiPo (1-8S)/LiFe (1-8S)- Lilon (1-8S)/NiMH/Cd (1-10S)10. Display type: 2.4 inches 320x240 260,000 colors IPS LCD11. Visible 260,000 color display under strong sunlight12. The exquisite and powerful BG-8S intelligent battery tester fully supports BattGO technology13. With BattGO technology, you can fully understand the detailed parameters of the battery just by connecting to XT60i14. Easy to read battery voltage, battery cycle, working parameters and set up quickly15. Automatically balance the battery voltage, advanced automatic balance algorithm, to ensure the balance of each cell, automatically enter the low power consumption mode after completion16. Powerful portable charging function, connect to your battery, BG-8S can be a power bank for your mobile devices17. Support Qualcomm QC 2.0/3.0, compatible with BC1.2 and for Apple devices18. Receiver signal test and protocol analysis, BG-8S uses a standard 3-pin plug to detect BEC output voltage19. BG-8S also supports multiple protocol analysis, including PWM, PPM&S.BUS, etc. Future firmware upgrades will support more protocol analysis20. Support XT60/XT60i, XH2.54 1-8s balanced leads, XH2.54 3-pin, JST ETC measuring voltage21. Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery and BEC output measurement22. Support USB upgrade, multi-language selection23. BG-8S has a Micro USB port, which can be easily connected to a PC for firmware upgrades24. The XT60i is designed for BattGo25. BG-8S adopts the XT60i connector jointly developed by ISDT and Amass, supports BattGO technology, and is highly compatible with the original XT60 plug26. Dimensions: 80x55x19mm27. Weight: 59 gramsSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 11cm * 10cm * 5cm / 4.33inch * 3.94inch * 1.97inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

Leer Más Menos

1. Stable measurement results can be obtained under a noisy environment by introducing the FFT (Fast Fourier Transform) technology. 2. LCD display, backlight function to view the test results in dimly areas 3. Rk Function is available to cancel the residual resistance on the Test Leads. 4. Function: battery check / auxiliary earth resistance measurement / auto-power-off 5. Warning for Auxiliary Earth Resistance Measurements. Warnings are displayed on the LCD when auxiliary earth resistances are too high and may result in inaccurate measurements. 6. The instrument is automatically powered off when 5 min passes without any Key operation. 7. Data storage: save 1000 test data 8. Specification: IEC 61010-1 (CAT.III 300V, CAT.IV 150V, Pollution degree 2) IEC 61010-031(Requirements for hand-held Probes) IEC 61557-1, 5 (Earth Resistance Tester) IEC 61326-1 EMC Standard Test range (temperature and humidity: 23+/-5 degree Celsius and 45~75% RH)Specification: Package Weight One Package Weight 2.99kgs / 6.59lb One Package Size 31cm * 27cm * 20cm / 12.2inch * 10.63inch * 7.87inch Qty per Carton 2 Carton Weight 6.96kgs / 15.34lb Carton Size 33cm * 29cm * 42cm / 12.99inch * 11.42inch * 16.54inch Loading Container 20GP: 663 cartons * 2 pcs = 1326 pcs40HQ: 1540 cartons * 2 pcs = 3080 pcs

Leer Más Menos