Resultados de la búsqueda de "display module"

1. 100% brand new and high quality. 2. Small and lightweight, easy to carry. 3. Display devices use high bright LED digital tube, stunning display effect. 4. Measure Voltage: DC 1.7-25V. (Lower than 1.7V measurement is not accurate, Higher than 25V will be burned) 5. The voltmeter only two wires: Red line connects positive, Black line connects negative.Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 7cm * 3cm * 2cm / 2.76inch * 1.18inch * 0.79inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 37cm * 32cm * 22cm / 14.57inch * 12.6inch * 8.66inch Loading Container 20GP: 1023 cartons * 500 pcs = 511500 pcs40HQ: 2376 cartons * 500 pcs = 1188000 pcs

Leer Más Menos

1. This carplay dongle can get help from your phone, without taking your hand off the wheel. 2. Support both Android and iOS system. 3. Control audio playback using voice commands. 4. Apple Car Play makes driving smarter (Tap the icons to take calls, check voicemails and text messages, or bring up maps). 5. Listen to your favorite songs using iTunes, Apple Music, or installed apps. 6. Parameters: Power input: 5V 1-2.1A Power output: DC 5V 1-2.1A Power consumption: 0.25W Resolution: 800 x 480, 2014 x 600, 1280 x 480 Applicable conditions: Vehicle terminal: Android 4.0, Mobile terminal: iOS10 or above or Android phoneSpecification: Package Weight One Package Weight 0.23kgs / 0.50lb One Package Size 24cm * 16cm * 4cm / 9.45inch * 6.3inch * 1.57inch Qty per Carton 60 Carton Weight 13.80kgs / 30.42lb Carton Size 52cm * 48cm * 42cm / 20.47inch * 18.9inch * 16.54inch Loading Container 20GP: 254 cartons * 60 pcs = 15240 pcs40HQ: 590 cartons * 60 pcs = 35400 pcs

Leer Más Menos

About the product1. Perfect combination of hot air gun rework station with welding tools, compact body, simple operation, easy to use, small footprint, suitable for all occasions maintenance 2. Sensor closed loop, microcomputer PID control, precise temperature control, convenient and intuitive 3. The hot air gun power, heating quickly, the wind gentle, air volume, ideal for free desoldering job 4. The soldering station heating element uses low-voltage power supply, can effectively protect sensitive devices and staff safetySolder EquipmentOperating Voltage: AC 26V+/-10% 50Hz Output Power: 40W+/-10% Temperature Range: 200 ~ 480 Degree Celsius Temperature stability: +/-2 Degree Celsius (Static state) Setting mode: Buttons to adjust Display: LED Digital Temperature lock mode: Button Tip-to-ground impedance: <2ohm Tip-to-ground voltage: <2mV Tip: BST900M-T-I Heater: Four core ceramic heaterSpecification: General Model BST-898D Material Plastic, Metal Voltage AC 220V+/-10% 50Hz Power 720W+/-10% Working Temperature 0 Degree Celsius ~+40 Degree Celsius Relative humidity＜80％ Storage Temperature -20~80 Degree Celsius Relative humidity<80% Temperature Range 100 ~ 450 Degree Celsius Temperature Stability +/-2 Degree Celsius (Static state) Gas Type Import brushless fan / soft airflow Gas Flow 120L/min (Max) Setting Mode Buttons to adjust Temperature Lock Mode Button Noise Less than 45dB Nozzle Specifications Diameters 5mm & 8mm & 10mm Heating Wire High-power heating wire Package Include Package Contents 1 x User Manual 3 x Nozzles 1 x IC Pulling device 1 x Open helper 1 x Hot Air Gun 1 x Solder Station 1 x Soldering Iron Package Weight One Package Weight 2.77kgs / 6.11lb One Package Size 26cm * 16.5cm * 14.8cm / 10.24inch * 6.5inch * 5.83inch Qty per Carton 4 Carton Weight 12.20kgs / 26.90lb Carton Size 35cm * 28cm * 32cm / 13.78inch * 11.02inch * 12.6inch Loading Container 20GP: 850 cartons * 4 pcs = 3400 pcs40HQ: 1974 cartons * 4 pcs = 7896 pcs

Leer Más Menos

Specifications:1. Model: X200 Max2. Wide voltage input: 200V-240V (American standard: 90V-130V)3. Power: 200W4. Temperature range: 90-450 degrees Celsius5. Compatible Handles: 210/115/2456. Size: 20.5 x 15 x 12.5cmFeatures:1. Hybrid Power Supply Technology reduces high-current impact on transformers or power modules during heating, significantly enhancing reliability while improving power efficiency.2. PWM Frequency Conversion Technology operates at frequencies ranging from 1 to 4.6 kHz, delivering true high-frequency eddy current intelligent soldering stations. Heating efficiency doubles that of traditional PWM control, offering energy savings and environmental benefits.3. Compatible with multiple handles: Supports 210/245/115mm handles, interchangeable based on operational needs4. Digital color display: High-definition LED color screen provides real-time, intuitive parameter monitoring. Power output and temperature progress are displayed instantly for efficient, energy-saving operation5. Touch-sensitive temperature control: Long press to adjust temperature, double-tap to switch temperature settings—convenient, quick, and intuitive6. Package includes:1 x Host1 x Power Cord2 x 210 Handle2 x 210 Heating Core1 x Cable Collector1 x Brass Ball Wires2 x Cleaning SpongesSpecification: Package Weight One Package Weight 1.80kgs / 3.98lb One Package Size 26cm * 26cm * 18cm / 10.24inch * 10.24inch * 7.09inch Qty per Carton 2 Carton Weight 4.60kgs / 10.14lb Carton Size 28cm * 28cm * 38cm / 11.02inch * 11.02inch * 14.96inch Loading Container 20GP: 895 cartons * 2 pcs = 1790 pcs40HQ: 2077 cartons * 2 pcs = 4154 pcs

Leer Más Menos

Features1. 3W high-power 850 infrared LED2. Onboard photoresistor, the ambient light detector3. Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED4. Allows adding night vision function to cameras which feature embedded infrared filter :a) 100 degree field of view, two pieces of LED is required to get wider field of viewb) Supported devices : RPi Camera (E), RPi Camera (F), RPi Camera (H)How to Use1. Connect the Infrared LED Board to the camera PCB by screws2. The screw holes are used for both attachment and power supply3. Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically4. When ambient light is lower than threshold value, the infrared LED is on, vice versaNote :1. Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.2. Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines.Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 5cm * 4cm / 2.36inch * 1.97inch * 1.57inch Qty per Carton 800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 800 pcs = 221600 pcs40HQ: 644 cartons * 800 pcs = 515200 pcs

Leer Más Menos

1. For Apple Watch Series 7 45mm display model with black screen. 2. One to one simulation. 3. Firm and durable. 4. Each item has been checked and in good condition before shipping. 5. Good gifts or surprises in party, also could serve for display purpose.Specification: General Compatible with Apple: Watch Series 7 45mm Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 10cm * 6cm / 3.94inch * 3.94inch * 2.36inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 33cm * 52cm / 16.54inch * 12.99inch * 20.47inch Loading Container 20GP: 370 cartons * 200 pcs = 74000 pcs40HQ: 858 cartons * 200 pcs = 171600 pcs

Leer Más Menos

1. For Apple Watch Series 6 40mm display model with black screen. 2. One to one simulation. 3. Firm and durable. 4. Each item has been checked and in good condition before shipping. 5. Good gifts or surprises in party, also could serve for display purpose.Specification: General Compatible with Apple: Watch Series 6 40mm Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 10cm * 10cm * 6cm / 3.94inch * 3.94inch * 2.36inch Qty per Carton 100 Carton Weight 5.70kgs / 12.57lb Carton Size 52cm * 42cm * 34cm / 20.47inch * 16.54inch * 13.39inch Loading Container 20GP: 359 cartons * 100 pcs = 35900 pcs40HQ: 833 cartons * 100 pcs = 83300 pcs

Leer Más Menos

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Leer Más Menos

1. Uses: suitable for all automobiles, wind power, solar power, pollution-free power generation, etc.2. Features: suitable for continuous use of laptop computers in the car, with automatic protection during overload, overvoltage, over temperature, and short circuit, strong and durable, beautiful and lightweight, convenient and practical3. Circuit topology: push-pull4. Output voltage waveform: correction wave5. Input voltage range: 9.5V-15.5V6. Output voltage: 220V7. Output power: 500W8. Peak power: 6000W9. Product size: 203x110x56mm10. Product weight: 650gSpecification: Package Weight One Package Weight 0.68kgs / 1.50lb One Package Size 22cm * 14.5cm * 10cm / 8.66inch * 5.71inch * 3.94inch Qty per Carton 30 Carton Weight 22.00kgs / 48.50lb Carton Size 53cm * 46cm * 46cm / 20.87inch * 18.11inch * 18.11inch Loading Container 20GP: 237 cartons * 30 pcs = 7110 pcs40HQ: 551 cartons * 30 pcs = 16530 pcs

Leer Más Menos

1. Material: iron + plastic2. Speed ??range: 0-199KM/H3. Speed ??display: 12000 rpm (MAX)4. Power supply voltage: 12V DC power supply5. Applicable models: Universal for motorcycles6. One button to switch between ODO and TRIP, KM/H and MPH7. The LCD display can be easily viewed from all angles under lighting conditions or in the dark8. Net weight: 152.7g9. Dimensions: 141x46x36mmSpecification: Package Weight One Package Weight 0.25kgs / 0.54lb One Package Size 16cm * 10cm * 7cm / 6.3inch * 3.94inch * 2.76inch Qty per Carton 36 Carton Weight 9.90kgs / 21.83lb Carton Size 50cm * 32cm * 30cm / 19.69inch * 12.6inch * 11.81inch Loading Container 20GP: 555 cartons * 36 pcs = 19980 pcs40HQ: 1289 cartons * 36 pcs = 46404 pcs

Leer Más Menos

1. Easy to install. 2. Decorate car appearances, make your car particular and unique. 3. Durable and light weight. 4. Suitable for Mitsubishi Lancer EVO 2008-2015. 5. Material: carbon fiber Specification: General Compatible with Mitsubishi: Lancer Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 42cm * 20cm * 2cm / 16.54inch * 7.87inch * 0.79inch Qty per Carton 60 Carton Weight 3.90kgs / 8.60lb Carton Size 52cm * 48cm * 42cm / 20.47inch * 18.9inch * 16.54inch Loading Container 20GP: 254 cartons * 60 pcs = 15240 pcs40HQ: 590 cartons * 60 pcs = 35400 pcs

Leer Más Menos

1. This dummy tablet PC model is designed for iPad 10th Gen 10.9 2022. This fake model is exactly the same in the appearance, size and weight of the real tablet PC, and pattern on the screen, but it canot work. 2. Party Pranks: Great for pranks and parties! Trick your friends and family into thinking you destroyed, damaged, or lost their tablet PC. It is so realistic looking they will not be able to tell the difference. 3. Pretend Play for Kids: Occupy your children by providing them a toy tablet PC so that they do not damage your real one. 4. In-Store Displays and Photo Shoots: Display a model tablet PC instead of real devices to your customers to avoid theft or damage. Use safely in video and photography production shoots, stunts, or media events. 5. Material: Premium ABS plastic screen to avoid glass injure, identical weight as original tablet PC, keys could be pressed but card slot could not be pulled out. 6. Compatible with Accessories and Cases: Works with standard tablet PC cases, data cables, and other accessories just like a real tablet PC. Accessorize your toy tablet PC like you would a real one.Specification: General Compatible with Apple: iPad (2022) Package Weight One Package Weight 0.48kgs / 1.06lb One Package Size 26cm * 20cm * 1.5cm / 10.24inch * 7.87inch * 0.59inch Qty per Carton 40 Carton Weight 18.60kgs / 41.01lb Carton Size 42cm * 27cm * 32cm / 16.54inch * 10.63inch * 12.6inch Loading Container 20GP: 734 cartons * 40 pcs = 29360 pcs40HQ: 1705 cartons * 40 pcs = 68200 pcs

Leer Más Menos