Resultados de la búsqueda de "usb antenna accessories"

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module provides more flexible power supply options for the development board.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve both networking and power supply.13. Dimensions: 55x68mmRaspberry Pi camera module B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focusPackage contents:ESP32-P4-WIFI6-POE-ETH x 1SH1.0 4PIN connecting cable (approx. 150mm) x 21217 cavity speaker 8Ω 2W x 12.4G antenna x 1RPi camera (B) x 1FFC 15PIN ribbon cable x 1Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs

Leer Más Menos

HAT 4G/3G/GNSS para Raspberry Pi, basado en SIM7600E-H Región aplicable 1. SIM7600A-H se aplica principalmente en América del Norte (EE. UU., CA, MX), SIM7600E-H se aplica principalmente en el sudeste de Asia, Asia occidental, Europa y África, y SIM7600CE-T se aplica principalmente en China. 2. Verifique las bandas compatibles según su proveedor de servicios local y seleccione la adecuada al realizar el pedido. Descripción general 1. El SIM7600A-H 4G HAT es un módulo de comunicación 4G y posicionamiento GNSS, que admite LTE CAT4 hasta 150 Mbps para transferencia de datos de enlace descendente. Tiene un consumo de energía bastante bajo. 2. Puede conectar este módulo 4G a la computadora para navegar por Internet o conectarlo a Raspberry Pi para habilitar funciones como conexión de alta velocidad 4G, comunicación inalámbrica, realizar llamadas telefónicas, enviar SMS, posicionamiento global, etc. Características 1. Conectividad Raspberry Pi, compatible con Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ 2. Admite acceso telefónico, llamadas telefónicas, SMS, MMS, correo, TCP, UDP, DTMF, HTTP, FTP, etc. 3. Admite posicionamiento de estación base GPS, BeiDou, Glonass y LBS 4. Interfaz USB incorporada, para probar comandos AT, obtener datos de posicionamiento GPS, etc. 5. Convertidor USB a UART CP2102 integrado, para depuración en serie 6. Pines de control UART de conexión, para conectar con placas host como Arduino/STM32 7. Ranura para tarjeta SIM, compatible con tarjeta SIM de 1,8 V/3 V 8. Conector de audio integrado y decodificador de audio para realizar llamadas telefónicas. 9. 2 indicadores LED, fácil de monitorear el estado de trabajo. 10. Traductor de voltaje integrado, el voltaje de funcionamiento se puede configurar a 3,3 V o 5 V mediante un puente. 11. Velocidad en baudios: 300 bps ~ 4 Mbps (valor predeterminado: 115 200 bps) 12. Velocidad en baudios de transmisión automática: 9600 bps ~ 115200 bps 13. Control mediante comandos AT (conjunto de comandos 3GPP TS 27.007, 27.005 y V.25TER) 14. Soporte del kit de herramientas de aplicaciones SIM: SAT Clase 3, USAT 15. Viene con recursos de desarrollo y manual (ejemplos para Raspberry Pi/Arduino/STM32) Especificaciones de comunicaciones 1. Banda: - LTE --SIM7600A-H: --- LTE-FDD B2/B4/B12 --SIM7600E-H: --- LTE-FDD B1/B3/B5/B7/B8/B20 --- LTE-TDD B38/B40/B41 --SIM7600CE-T: --- LTE-TDD B38/B39/B40/B41 --- LTE-FDD B1/B3/B8 - WCDMA / TD-SCDMA / CDMA 2000 --SIM7600A-H: --- UMTS/HSPA+ B2/B5 --SIM7600E-H: --- UMTS/HSPA+ B1/B5/B8 --SIM7600CE-T: --- UMTS/HSDPA/HSPA+ B1/B8 --- TD-SCDMA B34/B39 --- CDMA 1X/EVDO BC0 - GSM/GPRS/EDGE 900/1800 MHz 2. Generación: 4G, 3G, 2.5G, 2G 3. Potencia de emisión: 0,25 W, 0,5 W a EGSM900, 0,4 W a DCS1800, 2 W a GSM900, 1 W a DCS1800 4. Velocidad de datos - LTE CAT 4 --Enlace ascendente=<50 Mbps -- Enlace descendente=<150 Mbps - UMTS --Enlace ascendente=<384 Kbps -- Enlace descendente=<384 Kbps - BORDE --Enlace ascendente=<236,8 kbps -- Enlace descendente=<236,8 kbps - GPRS --Enlace ascendente=<85,6 kbps -- Enlace descendente=<85,6 kbps - HSPA+ --Enlace ascendente=<5,76Mbps -- Enlace descendente=<42Mbps Especificaciones GNSS 1. Tipo de receptor - 16 canales - Código C/A 2. Sensibilidad - Seguimiento: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD) - Arranques en frío: -148 dBm 3. Tiempo hasta la primera reparación (al aire libre) - Arranques en frío: <35 s - Arranques en caliente: <1 s 4. Precisión - Posición: <2,5m CEP Especificaciones de SMS y audio 1. Mensajes de texto - Tipos de soporte: MT, MO, CB, Texto, PDU - Almacenamiento: Tarjeta USIM y ME (predeterminado) 2. Función de audio - Admite cancelación de eco. - Admite reducción de ruido Otras especificaciones 1. Fuente de alimentación: 5 V 2. Voltaje de funcionamiento: 5 V/3,3 V (configurado mediante puente) 3. Temperatura de funcionamiento: -30 grados C ~ 80 grados C 4. Temperatura de almacenamiento: -45 grados C ~ 90 grados C 5. Dimensiones: 56,21 mm x 65,15 mm ¿Qué hay a bordo? 1. SIM7600E-H 2. Convertidor USB a UART CP2102 3. Descodificador de audio NAU8810 4. Traductor de voltaje TXS0108EPWR: traduce 3,3 V/5 V a 1,8 V 5. Chip de potencia MP2128DT 6. Chip de potencia MP1482 7. Encabezado GPIO de Raspberry Pi: para conectar con Raspberry Pi 8. Interfaz de control SIM7600: para conectar con placas host como Arduino/STM32 9. Ranura para tarjeta SIM: admite tarjeta SIM de 1,8 V/3 V 10. Ranura para tarjeta TF: permite almacenar archivos/SMS/... 11. Conector para auriculares y micrófono de 3,5 mm 12. Interfaz USB: para probar comandos AT, obtener datos de posicionamiento GPS, etc. 13. Interfaz USB a UART: para depuración en serie o inicio de sesión en Raspberry Pi 14. Conector de antena PRINCIPAL 15. Conector de antena AUX 16. Conector de antena GNSS 17. Interruptor de encendido 18. Indicador de estado de la red 19. Indicador de encendido 20. Puente de selección de voltaje de funcionamiento: - VCCIO - 3,3 V: establece el voltaje de funcionamiento como 3,3 V - VCCIO - 5V: establece el voltaje de funcionamiento como 5 V 21. Puente de selección UART: - A: Acceder a Raspberry Pi a través de USB a UART - B: Controlar el SIM7600 mediante Raspberry Pi - C: Controla el SIM7600 vía USB a UART Contenido del paquete 1. Gorro SIM7600E-H 4G x1 2. Antena LTE x1 3. Antena externa GPS (B) x1 4. Cable USB tipo A a microconector x2 5. Paquete de tornillos RPi (2 piezas) x1 Especificación: Peso del paquete Peso de un paquete 0,25 kg/0,55 lb Un tamaño de paquete 15 cm x 8 cm x 3 cm (5,91 pulgadas x 3,15 pulgadas x 1,18 pulgadas) Cantidad por caja 260 Peso de la caja 68,38 kg/150,75 lb Tamaño de la caja 60 cm x 40 cm x 39 cm (23,62 pulgadas x 15,75 pulgadas x 15,35 pulgadas) Contenedor de carga 20GP: 284 cajas * 260 piezas = 73840 piezas 40HQ: 661 cajas * 260 piezas = 171860 piezas

Leer Más Menos

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module, making the development boards power supply more flexible.12. Only one network cable is needed to connect to a PoE device, enabling both networking and power supply for the ESP32-P4-WIFI6-POE-ETH.13. Dimensions: 55x68mm14. Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs

Leer Más Menos

1. The frequency meter capable of measuring the parameters of the frequency of the continuous carrier signal walkie-talkies, with signal strength indicator. 2. This portable frequency counter is designed for counting continuous wave signal comes from two-way radio. 3. There are easy ranges for you to choose. The ranges cover most of the frequency of the two way radios you want to measure. 4. 4 buttons for all function control, its four-button control is easy to use and its small size allows you to carry it anywhere you like. 5. Work by TCXO (crystal) Osc.2~2.5ppm. 6. Use for VHF/UHF walkie-talkies. 7. Auto power off 1-9 minutes. 8. Frequency response time: 0.2-0.5s (CTCSS/CDCSS>0.5-1s). 9. 240*320 pixel color LCD. 10. Digital select digi0.000 or 0.0000. 11. Frequency range: 27MHz-3000MHz (Note: 27-100MHz, it can not be guaranteed and the corresponding normal emission appliance)Specification: General Model SF401 Plus Material PC ABS Voltage 3.7V Battery Types Lithium-ion Battery Size 10.3*7*2.8cm Weight 102g Package Include Package Contents 1 x Detachable Antenna 1 x User Manual 1 x USB Cable 1 x Frequency Counter 1 x Power Adapter Package Weight One Package Weight 0.27kgs / 0.59lb One Package Size 19cm * 13cm * 5cm / 7.48inch * 5.12inch * 1.97inch Qty per Carton 20 Carton Weight 5.80kgs / 12.79lb Carton Size 40cm * 28cm * 27cm / 15.75inch * 11.02inch * 10.63inch Loading Container 20GP: 881 cartons * 20 pcs = 17620 pcs40HQ: 2047 cartons * 20 pcs = 40940 pcs

Leer Más Menos

NB-IoT HAT for Raspberry Pi, Based on SIM7020E, B1/B3/B5/B8/B20/B28 BandsApplicable Region1. SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.2. Please check the supported bands according to your local service provider when placing order.OverviewThis is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.Features1. Raspberry Pi connectivity, compatible with any revision2. Support communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.3. Onboard USB interface, for power supply OR debugging4. Breakout UART control pins, to connect with host boards like Arduino/STM325. Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper6. SIM card slot, supports NB-IoT specific card7. 2x LED indicators, easy to monitor the working status8. Baudrate: 300bps~921600bps (115200bps by default)9. Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)10. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32/Python)Communications Specifications1. Band- FDD-LTE B1/B3/B5/B8/B20/B28 2. Data rate- Uplink=<62.5Kbps- Downlink=<26.15Kbps3. SMS- Text mode and PDU mode (depends on the NB card)General Specifications1. Power supply: 5V2. Logic level: 5V/3.3V (3.3V by default)3. Overall current (idle mode): ~18mA4. Single module current (VBAT=3.3V):- Idle mode: 5.6mA- Sleep mode: 0.4mA- PSM mode: 5uA- eDRX mode: 70uA (eDRX=655.36s)5. Dimension: 30.5mm x 65.0mmPackage Contents1. SIM7020E NB-IoT HAT x12. Antenna x13. USB type A plug to micro plug cable x14. RPi screws pack (2pcs) x1Note: The Raspberry Pi is NOT included.Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs

Leer Más Menos

FeaturesThis is a precise centimeter level Raspberry Pi GNSS HAT based on ZED-F9P. It provides features like multi-band RTK with fast convergence times, high update rate, moving base RTK mode support, concurrent reception of 4 GNSS systems, augment positioning systems support, accurate & fast positioning with minor drifting, and outstanding ability for anti-spoofing & anti-jamming. By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Multi-band RTK with fast convergence times, centimeter level accuracy, high update rate 3. Support Moving base RTK mode, enabling terminal precise navigation and centimeter level accuracy 4. Support concurrent receiving 4 GNSS constellations (GPS, BeiDou, Galileo and GLONASS), and still retains low power consumption 5. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location 6. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity 7. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing 8. Support U-Center, an easy way to config the module 9. Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 10. 4x LEDs for indicating the module operating status 11. Come with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specification1. ZED-F9P: Concurrent receiving, GPS 2. Frequency band: U-blox F9 platform, GPS L1C/A L2C, SBAS, QZSS, GLONASS L1OF L2OF, BeiDou B1I B2I, Galileo E1B/C E5b 3. Navigation update rate: - PVT: 20Hz - RTK: 25Hz - RAW: 25Hz 4. RTK convergence time: Less than 30s 5. Time-To-First-Fix: - Cold starts: 29s - Hot starts: 2s - Aided starts: 2s 6. Positioning accuracy: - PVT: 1.5m CEP - RTK (horizontal and vertical): 0.01m+1ppm CEP 7. Sensitivity: - Tracking and navigatingV-167 dBm - Re-acquisitionV-160 dBm - Cold starts: -148 dBm - Hot starts: -157 dBm 8. Velocity accuracy: 0.05 m/s 9. Heading accuracy 0.3 degree 10. PPS accuracy: - RMS: 30ns - 99%: 60ns - Jamming: +/-11ns 11. PPS frequency: 0.25Hz ~ 10MHz (configurable) 12. Operational limits: Acceleration (MAX): 4g 13. Altitude (MAX): 50000m 14. Velocity (MAX): 500m/s 15. Communication interface: USB, UART (4800~921600bps, 9600bps by default), I2C (MAX 400KHz), SPI (5MHz) 16. Protocol: NMEA 0183 Version 4.10, UBX, RTCM 3.3 17. Power supply: 5V 18. Overall current: Less than 120mA at 5V (continue mode) 19. Module current: 130mA at 3V (tracking status) 20. Operating temperature: -40 degree C ~ 85 degree C 21. Dimensions: 65mm x 30.5mmPackage List1. ZED-F9P GPS-RTK HAT x 1 2. Multi-band antenna x 1 3. USB-A to Micro-B cable x 1 4. Screws pack x 1 5. 2x20PIN female header x 1Specification: Package Weight One Package Weight 0.36kgs / 0.78lb One Package Size 20cm * 16cm * 5cm / 7.87inch * 6.3inch * 1.97inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 80 pcs = 40000 pcs40HQ: 1162 cartons * 80 pcs = 92960 pcs

Leer Más Menos

Function1. Remove the headphones and the power button/microphone jack to the front panel, convenient to connect the headset and the power button 2. Move the keys to the bottom of the LCD screen for a larger touch area and a more comfortable keystroke experience 3. Upgrade the built-in speakers to double the sound 4. PCB to reserve a variety of upgrades required pad, out of the box, can be used as a DIY upgrade learning template 5. Change the QRP CW frequency quickly 6. Support CW side volume adjustment 7. Support CW side tones 8. This is a shortwave QRP SSB/CW transceiver. Ultra-small size for portable outdoor use, (no battery) 1602n LCD screen, built-in speakers, support to connect computers using FT8, JS8, FT4 and other mode software control digital, support CW automatic decoding Features: 1. 8 tracks covering 80M/60m/40m/30M/20m/17M/15m/10m 2. PCB layout design in line with high frequency circuit design principles to ensure excellent performance 3. Both built-in Battery and external 13.8v power supply, can achieve 8-stop 3-5w power, and reserve the necessary sot-223 and To-220 pack pad for upgrading 4. High launch efficiency 7. KDS high precision tcxo brand, frequency accuracy above 1ppm, frequency stability above 0.5ppm 8. Ultra-small size: 88x39x124mm (without bulge) 9. Rich interfaces (cat, ptt out, mic/key, k-head mic) 10. All LPF components use 100v c0g/np0 capacitors 11. Using op-amp chips are lower than those of lm4562 noise 12. A built-in speaker with a cavity 13. BNC antenna interfaceExplanation1. Support full mode: usb, lsb, cw, am, fm (ssb mode reception effect is good, but the transfer effect is poor. AM and FM mode is free, the effect is not good) 2. Filter DSP filter: 4000, 2500,1700,500,200,100,50 Hz passband 3. Function DSP function: automatic gain control (AGC), noise reduction (NR) , XMIT Voice Trigger (Vox), RX attenuator (Att), TX Noise Gate, TX unit control, volume control, DBM/S instrument 4. Sidebar/carrier suppression SSSSB emission: superior to -45dbc, IMD3(dual tone) -33dbc, receiver: superior to -50dbc 5. Support for multi-band support, in the 80m frequency range of continuous adjustable 10m (from 20khz. 99mhz, loss performance) 6. Open source firmware, built using Arduino IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines based on 7. The software vovovox code can be used for fast complete control (qsk and semi-qsk operations) or RX/auxiliary switch TX to be used in digital mode (no cat or PTT interface is required) 8. The PTT/PA output is externally controlled by the all-digital tx-delay stage and the software-based SSB stage transmitter: the phase of sill SI5351 is controlled (by a small frequency change i2c at 800 kbits/s) and the PA amplitude is controlled (by a pwm pa key shaping circuit) 9. Software-based all-digital SDR receiver level (optional): sampling of I/Q (complex) signals from a digital mixer with an orthogonal sampling detector, and mathematically perform a 90-degree phase shift (David Hilbert transform) in the software by adding an Atten sideband 10. Three independent switchable analog pushers (0db, -13 db, -20 db, -33 db, -53 db, -60 db, -73 db) from the front receiver 11. Receiver background noise mds: -135 DBM at 28 mhz (200 hz bw) 12. Receiver receiver front-end selectivity: +/-2 khz scrolling at steep 45 db/decade tuning frequency 13. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db 14. CW decoder, direct/iambic-a/B keying 15. VVFO A/B + RIT and split, and the corresponding relays pass through i2c 16. The CAT supports cat with a filter switch (using the kenwood TS-480 protocol) Package includes: 1. 1 x transceiver 2. 1 x the microphone 3. 1 x charger 4. 4 x machine floor MatsSpecification: Package Weight One Package Weight 0.53kgs / 1.16lb One Package Size 17cm * 12cm * 8cm / 6.69inch * 4.72inch * 3.15inch Qty per Carton 56 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 56 pcs = 9912 pcs40HQ: 412 cartons * 56 pcs = 23072 pcs

Leer Más Menos

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 554g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 200g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x 30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x 4 16. 4 PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.08kgs / 2.37lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs

Leer Más Menos

FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs

Leer Más Menos