Resultados de la búsqueda de "Temperature Sensor"

Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

1. The product quickly sleeps and wakes up quickly to achieve intelligent power saving 2. 2 million pixel high-definition image, intelligent dual-light full-color night vision 3. Support continuous charging of removable solar panel, ultra-low power consumption, ultra-long standby 4. Built-in microphone and speaker, support two-way voice intercom 5. Built-in PIR alarm sensor, providing accurate and instant alarm, mobile phone APP push 6. Support PTZ control, 330 degrees left and right, 90 degrees up and down 6. Support cloud storage and 128GB TF card local storage. 7. APP supports Android/iOS 8. Metal shell, IP66 outdoor protection 9. Removable 8W solar panel, sustainable charge the battery and uninterruptible power supply for camera 10. Product size: 244x170x101mm Specification: General Model QF280 Shape Dome Mount Types Wall bracket Power Depletion 4W Memory TF Card, up to 128GB (not included) System / Hardware Operating System Android, iOS Image Sensor CMOS Effective Pixel 1920(H)×1080(V) Lens 3.6mm, 120 Degree View Angle Pan/Tilt-Horizontal Angle 355 degrees Pan/Tilt-Vertical Angle 120 degrees Media Format Video Compression Format H.265 Night Vision Infrared Distance 30m Physical Environment Operate Temperature -30 to 60 Degree Celsius Working Humidity 0 to 90 percent Dimensions Size 24.4x17.0x10.1cm Weight 1600g Package Include Package Contents 1 x Camera 1 x USB Cable 1 x User Manual 1 x Screws Set 1 x Solar Panel 1 x Position Paper Package Weight One Package Weight 2.60kgs / 5.73lb One Package Size 30cm * 22cm * 19cm / 11.81inch * 8.66inch * 7.48inch Qty per Carton 6 Carton Weight 12.50kgs / 27.56lb Carton Size 60cm * 44cm * 32cm / 23.62inch * 17.32inch * 12.6inch Loading Container 20GP: 315 cartons * 6 pcs = 1890 pcs40HQ: 732 cartons * 6 pcs = 4392 pcs

Leer Más Menos

1. Flexible joint movement and an omnidirectional workspace. The 360-degree rotating base, combined with flexible joint movement, creates a 1-meter-diameter omnidirectional workspace within easy reach, allowing the robotic arm to move freely in all directions2. Simple and easy to use, with cross-platform Web App control， no download or installation required; simply enter the URL to access and control the robot3. Fully open-source, supporting secondary development4. Joint feedback accuracy reaches 0.088 degrees. Joint angle feedback bypasses any reduction gears, utilizing 12-bit high-precision magnetic encoders to directly measure joint angles, ensuring higher precision. The actual position of the current target point can be calculated based on the joint feedback angles5. Dual-drive control algorithm enables the two servos in the shoulder joint to coordinate torque output with high precision, significantly enhancing the overall load-carrying capacity of the robotic arm series6. Utilizes gear transmission and a parallel linkage structure to achieve stable power output and precise parallel opening and closing, effectively reducing gripping wobble. Supports programmable adjustment of the gripper’s opening and closing angles to easily adapt to objects of different sizes and meet diverse gripping needs7. The isolation column is flexible and adjustable, easily adapting to different requirements8. Dynamic external force adaptation control: When this feature is enabled, the maximum torque for each joint can be limited. When the applied external force exceeds the joint torque threshold (the threshold value is configurable), the robotic arm will rotate in response to the external force; when the external force decreases below the torque threshold, the robotic arm will return to its specified position9. One-click automatic recording for convenient motion creation. JSON commands used for robot control can be saved as task files. These task files are stored in the ESP32’s Flash memory and are not lost in the event of a power outage; the robotic arm can execute complex repetitive operations by calling these task files10. Simple coordinate input for precise target acquisition. By entering the target position, the inverse kinematics function calculates the rotation angles required for each joint, enabling the robotic arm to accurately reach the target point11. Smooth, curved motion for more fluid movements. A curved velocity smoothing control algorithm is used to make the robotic arm’s movements smoother and more natural, with no jerk during starts and stops12. Low-latency wireless control for remote collaboration. One robotic arm can wirelessly control other robotic arms using broadcast, multicast, or unicast control modes13. In mimic mode, the robot arm acting as the Leader transmits its joint angles to other robot arms via ESP-NOW. When other robot arms are in ESP-NOW Follower mode, they mimic the Leader in real time, performing the same movements14. Open control interface supporting multiple devices and programming languages15. Utilizes the powerful ESP32 as the main control MCU, supporting multiple wireless communication protocols16. Drag-and-drop interaction provides greater flexibility in control; action commands can be configured for when the mouse button is pressed or releasedSpecifications1. Number of degrees of freedom: 3 + 12. Working space: maximum horizontal diameter 1017 mm (360° omnidirectional), maximum vertical range 778 mm3. Operating voltage: standard 12V 5A power supply; can be powered by a 3S lithium-ion battery pack4. Payload capacity: 0.5 kg, 0.5 m5. Unidirectional repeatability: about ±4 mm (with the same payload)6. Driver rotation speed: 40 rpm (no-load, no torque limit)7. Operating range: BASE-360°, SHOULDER-180°, ELBOW-180°, HAND-180°8. Drive method: TTL bus servo (TTL BUS SERVO), direct-drive joints9. Number of drives: 510. Joint angle sensor: 12-bit 360-degree magnetic encoder11. Driver stall torque: 30 kg·cm at 12 V12. Joint feedback information: driver status, joint angle, rotational speed, joint load, driver voltage, driver current, driver temperature, driver operating mode14. On-board controller: ESP32-WROOM-3215. On-board controller module features: Wi-Fi, Bluetooth, Dual-Core, 240 MHz16. Wireless control methods: 2.4 GHz Wi-Fi, ESP-NOW17. Wired control methods: USB, UART18. Manual control method: web-based control interface19. Robot control method: commands in JSON format via UART/USB/Web communication20. Compatible host devices: for Raspberry Pi, Jetson Orin Nano, PC, and other devices supporting USB connection21. OLED screen size: 0.91 inches22. Other on-board features: two 12V switches, 9-DOF IMU23. Robot arm eeight: RoArm-M2-GA: 930 ± 15 g (excluding the desk-mount clamp)24. Desk-mount clamp weight: 290 ± 10 g25. Maximum desk edge thickness supported by the desk-mount clamp: 72 mm26. Robot arm routine functions: 3D Cartesian coordinate system control (inverse kinematics control), dynamic external force adaptation control, joint angle control, operational feedback, Flash file system operations, step recording and playback, ESP-NOW control, mimic mode, onboard 12V switch control, Wi-Fi-related settings, power-on mode settings, bus servo-related settings, feedback mode settings, and more. Note: This is only a general overview; for specific functions and related commands of the open-source routines, please refer to the WIKISpecification: Package Weight One Package Weight 1.65kgs / 3.65lb One Package Size 60cm * 20cm * 16cm / 23.62inch * 7.87inch * 6.3inch Qty per Carton 1 Carton Weight 2.00kgs / 4.41lb Carton Size 60cm * 20cm * 16cm / 23.62inch * 7.87inch * 6.3inch Loading Container 20GP: 1388 cartons * 1 pcs = 1388 pcs40HQ: 3224 cartons * 1 pcs = 3224 pcs

Leer Más Menos

Features:1. 1080P resolution 2 million + 2 million high-definition pixels2. 90 degrees up and down, 355 degrees left and right rotation (360 degrees screen field of view)3. Dual-screen ultra-clear images are output at the same time, with a wider monitoring angle and higher image quality.4. Support gun-ball linkage function, global monitoring of the gun, rapid positioning and tracking of the ball camera, taking into account both panorama and details. By dragging the camera gun to any position on the client screen, the dome camera can automatically adjust through the PTZ to place the area in the center of the screen to quickly view the area of interest.5. Supports two-channel ultra-clear playback, high-definition playback, and supports dual-channel video storage on the video cloud and TF card. TF card supports 128G.6. Support humanoid algorithm, compatible with humanoid detection, intelligent tracking, and motion detection.7. Supports push of alarm information to mobile phone to achieve quick response. Manual APP tracking is also available, so no details are missed.8. Supports voice intercom, two-way noise reduction, and clearer intercom.9. Support remote monitoring, allowing you to monitor anytime and anywhere, and support remote preview for multiple users.10. Support full-color night vision, intelligent night vision, and remote switching of video.11. Two video storage methods 1-Memory card storage (supports 128GB Max), one-time purchase and lifetime free playback. 2-Cloud storage, cloud backup, videos will never be lost.Parameter:1. Main control chip processor: Ankai KM01D2. Image sensor: 1/4.6-inch Progressive Scan CMOS3. Operating system: embedded LINUX operating system4. Video compression standard: H.2655. Monitor image quality: 1920x1080x2/640x360x26. Video quality: 1920x1080x2/640x360x27. Image motion detection: support8. Minimum illumination: 0.1Lux/F1.2 (color); 0.01Lux/F1.2 (black and white)9. Capture function: supported10. Video flip: support11. Audio compression standard: G.711a12. Microphone: Support13. Speaker: Support14. Video file size: 2.5-4.5GB/day (16GB TF card can record for about 5 days)15. Recording methods: manual recording, dynamic detection recording, scheduled recording, alarm recording16. Video storage: TF card\cloud17. Remote playback: supported18. Alarm trigger: video push, speaker alarm, alarm recording19. Wireless network: 802.11b/g/n20. Code stream: dual code stream21. Network protocol: supports TCP/IP, UDP, ONVIF, etc.22. Transmission mode: intelligent P2P, streaming media forwarding23. WiFi networking: Scan the device code to add, WiFi (single frequency or dual frequency), 4G (optional) AP hotspot24. TF card: supports 128GB TF card Max25. WIFI: support26. Power supply: E27 110-240v27. Applicable places: homes, shops, schools, supermarkets, factories and other places; flat laying, wall mounting, hoisting28. Working temperature: -20~55 degrees Celsius29. Working humidity: 10%-90%30. Lens: 4MM+4MM31. Lens angle: 90 degrees32. Rotation angle:Horizontal: 355 degreesVertical: 90 degrees33. Light board: 4 infrared lights + 4 white light lightsSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 19cm * 9cm * 8.5cm / 7.48inch * 3.54inch * 3.35inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 49cm * 40cm * 45cm / 19.29inch * 15.75inch * 17.72inch Loading Container 20GP: 302 cartons * 50 pcs = 15100 pcs40HQ: 701 cartons * 50 pcs = 35050 pcs

Leer Más Menos

1. 2.4 inch TFT LCD screen. 2. 2.4GHz wireless digital technology, no interference, no privacy leak. 3. Built-in 7 pieces IR LED / 850nm night light. 4. Lullaby: Make baby more fast & soft to go to bed. 5. Night vision distance: Min.5m. 6. 300m transmission range in open area. 7. Built-in rechargeable li-battery in receiver. 8. 300M pixels, 1/3 inch color CMOS image sensor, EFL=3.6mm. F=2.8 lens camera. 9. Built-in microphone & speaker, two way audio communication. 10. Baby room temperature detection. 11. Baby monitor shelf with VHB sticker, install the baby monitor on the wall with shelf.Specification: General Model BM-SP820 Material ABS Power Supply 5V Memory Card Style Micro SD Card Frequency 2.4GHz Transmission Distance 300m Monitor Screen Size 2.4 inch LCD Screen Material TFT Resolution 320*240 RGB Camera Sensor 1/3 inch CMOS View Angle 70 degree Pixel 640*480 Night Vision Distance 5m IR LED Type 850nm Package Include Package Contents 1 x baby monitor 1 x Camera 2 x Power Charger (US, EU, UK, AU optional) Package Weight One Package Weight 0.58kgs / 1.27lb One Package Size 22cm * 18cm * 9cm / 8.66inch * 7.09inch * 3.54inch Qty per Carton 16 Carton Weight 9.20kgs / 20.28lb Carton Size 46cm * 36cm * 32cm / 18.11inch * 14.17inch * 12.6inch Loading Container 20GP: 503 cartons * 16 pcs = 8048 pcs40HQ: 1168 cartons * 16 pcs = 18688 pcs

Leer Más Menos

Color: Brown; Material: Flannel, Cotton Velvet; Size: 180cm x 130cm x 1cm1. SOFT AND COZY: This electric blanket combines 200 g/m2 flannel with double-layered cotton velvet for a warm, ultra-soft feel.Ideal for cold days, it wraps you up completely, providing comfort whether you're on the sofa or in bed.2. DETACHABLE CONTROLLER & SAFE USE: This heated blanket features a removable controller for easy temperature adjustment and washing.Its overheat protection system ensures safe and worry-free use.3. ADJUSTABLE TEMPERATURE & TIMER: This electric blanket offers 9 heat levels (ranging from 24°C to 42°C) and a timer adjustable from 1 to 9 hours.The LED display makes it easy to customize settings and achieve the perfect temperature at any time.4. MACHINE WASHABLE & EASY CARE: Thanks to the detachable controller design, the blanket is machine washable.It stays clean, soft, and hygienic even with frequent use, ensuring you always enjoy maximum comfort.5. OVERALL DIMENSIONS: Measuring 180x130 cm, this electric blanket covers a large area of ??the body and adds a cozy touch to any corner of your home.Its brown finish complements any décor style.Are you feeling cold at home but don't want to skyrocket your energy bills? This washable electric blanket is the perfect solution.Its blend of flannel and cotton velvet is soft and cozy, while its generous 180x130 cm size offers full-body coverage.Ideal for relaxing on the sofa or sleeping warmly, all wrapped in an elegant brown design.Specification: Package Weight One Package Size 180cm * 130cm * 1cm / 70.87inch * 51.18inch * 0.39inch Qty per Carton 1 Carton Weight 2100.00kgs / 4629.66lb Carton Size 38cm * 14cm * 34cm / 14.96inch * 5.51inch * 13.39inch Loading Container 20GP: 1474 cartons * 1 pcs = 1474 pcs40HQ: 3422 cartons * 1 pcs = 3422 pcs

Leer Más Menos

1. Lens size: 5.5mm2. Camera light source: 6 adjustable LEDS3. Working temperature: 32-113 degrees Fahrenheit (0-45 degrees)4. Battery: 2600mA lithium battery5. Working time: 4h6. Power input: DC 5V 500 mAh / 1A7. Waterproof: IP68 (only for lens)8. Front camera focal length: 5cm-500cm9. Focal length of side camera: 3cm-500cm10. Front camera resolution: 1960*108011. Side camera resolution: 1960*108012.Sensor pixels: 2 million pixels13. Viewing angle: 70 degrees14. Support system: ios, AndroidSpecification: Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 22cm * 13cm * 7cm / 8.66inch * 5.12inch * 2.76inch Qty per Carton 23 Carton Weight 16.43kgs / 36.22lb Carton Size 44cm * 39cm * 35cm / 17.32inch * 15.35inch * 13.78inch Loading Container 20GP: 444 cartons * 23 pcs = 10212 pcs40HQ: 1030 cartons * 23 pcs = 23690 pcs

Leer Más Menos

1. Dimension: 266.93x193.35x5.99mm 2. Weight: 579g 3. Display: 12.1 inch LCD screen, 3000x2120 resolution, up to 144Hz refresh rate 4. CPU: MediaTek Dimensity 9400+ Octa Core (1 x Cortex-X925 3.73Ghz + 3 x Cortex-X4 + 4 x Cortex-A720) 5. GPU: Immortalis G925 MC12 6. Memory: 8GB LPDDR5X RAM + 128GB UFS3.1 ROM 7. OS: ColorOS 16.0 8. Front camera: 8MP camera, support face unlock 9. Rear camera: 8MP main camera, supports 720p / 1080p / 4K 30fps video recording, Support anti-shake and time-lapse photography 10. Battery capacity: 10420mAh, Support 67W fast charging 11. Speaker: HiFi 6 speakers 12. USB interface: USB Type-C 3.2 Gen1 5Gbps 13. WI-FI: Support Wi-Fi 7(802.11be), Wi-Fi 6(802.11ax), Wi-Fi 5(802.11ac), 802.11a/b/g/n 14. Bluetooth: V6.0, SBC, AAC, aptX, aptX HD, LDAC, LHDC5.0 15. Sensors: Ambient light sensor, color temperature sensor, acceleration sensor, gyroscope, Hall sensor 16. Languages: Chinese and English 17. Package Contents: 1 x Tablet PC 1 x Power adapter 1 x USB Type-C cable 1 x User manualSpecification: Package Weight One Package Weight 1.56kgs / 3.44lb One Package Size 35cm * 26cm * 6cm / 13.78inch * 10.24inch * 2.36inch Qty per Carton 10 Carton Weight 16.00kgs / 35.27lb Carton Size 54cm * 36cm * 32cm / 21.26inch * 14.17inch * 12.6inch Loading Container 20GP: 428 cartons * 10 pcs = 4280 pcs40HQ: 995 cartons * 10 pcs = 9950 pcs

Leer Más Menos

1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs

Leer Más Menos

1. Admite una variedad de sistemas, plug and play, no requiere controlador 2. Idiomas admitidos: EE. UU., Bélgica, Brasil, Chequia, Dinamarca, Finlandia, Francia, Alemania, Austria, Hungría, Grecia, Italia, Países Bajos, Noruega, Portugal, Rusia, España, Suecia, Suiza, Turquía, Reino Unido, Japón 3. Memoria: 1 MB 4. Fuente de luz: láser visible de 650 nm 5. Corriente de escaneo: 50 mA 6. Velocidad de escaneo: 120 veces/segundo 7. Potencia de trabajo: 250mw 8. Voltaje de funcionamiento: 5 V CC. 9. Potencia en espera: 100 mW 10. Material del mango: ABS+TPU 11. Sensor de imagen: 640x480, CMOS, 30FPS 12. Corriente en espera: 30 mA 13. Modo de aviso: zumbador, indicador LED 14. Método de transmisión: transmisión por cable 15. Entorno de uso: -20 a 60 grados Celsius 16. Temperatura de almacenamiento: -30 a 90 grados Celsius 17. Dimensiones: 165x67x97mm 18. Peso: aproximadamente 200 g. Especificación: Peso del paquete Peso de un paquete 0,20 kg/0,45 lb Un tamaño de paquete 19,7 cm * 10,7 cm * 8,2 cm/7,76 pulgadas * 4,21 pulgadas * 3,23 pulgadas Cantidad por caja 50 Peso de la caja 11,00 kg/24,25 lb Tamaño de la caja 55 cm x 42 cm x 40 cm (21,65 pulgadas x 16,54 pulgadas x 15,75 pulgadas) Contenedor de carga 20GP: 288 cajas * 50 uds. = 14400 uds. 40HQ: 669 cajas * 50 piezas = 33450 piezas

Leer Más Menos

Description:1. Built-in 500MAH polymer lithium battery2. Remote control battery: button battery CR2016 3V / three (subject to the actual remote control model)3. The main battery is continuously charged and discharged up to 500 times (normal temperature)4. Host size: 93x45x19 mm5. Remote control size: 70x32x20 mm6. Alarm sound, test distance 10 cm up to 100 decibelsSpecification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15.5cm * 10cm * 5cm / 6.1inch * 3.94inch * 1.97inch Qty per Carton 186 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 186 pcs = 32922 pcs40HQ: 412 cartons * 186 pcs = 76632 pcs

Leer Más Menos

1. Shell material: metal2. Applicable models: for Jeep Wrangler 2007-20183. Image sensor: 1/3 CMOS 7070 4. Effective pixels: 976 x 4975. Resolution: 5006. Horizontal wide angle: 130-140 degrees7. Diagonal wide angle: 160 degrees8. Low illumination: 0.05Lux9. Waterproof rating: IP6710. Power supply voltage: DC 12V11. Power extension cable length: 6m12. Video output: CVBS13. Operating temperature: -20-70 degrees celsiusSpecification: General Compatible with Jeep: Wrangler Package Weight One Package Weight 1.00kgs / 2.21lb One Package Size 29cm * 19cm * 9cm / 11.42inch * 7.48inch * 3.54inch Qty per Carton 6 Carton Weight 7.00kgs / 15.43lb Carton Size 40cm * 31cm * 29cm / 15.75inch * 12.2inch * 11.42inch Loading Container 20GP: 741 cartons * 6 pcs = 4446 pcs40HQ: 1721 cartons * 6 pcs = 10326 pcs

Leer Más Menos