Resultados de la búsqueda de "Cover Car Charger"

1. Material: PBT body, PC waterproof dust cover, nickel-plated copper connection terminal. 2. Input rated voltage: 32V 3. Input rated current: 100A 4. Output maximum current: 30A per circuit 5. Indicator function: When the red LED is lit, it means the fuse has been disconnected, you need to replace the fuse in time to continue running. 6. Fuse function: When the circuit malfunctions or is abnormal, the current is continuously increased, and the increased current may damage some important devices or valuable devices in the circuit, and may also burn the circuit or even cause a fire. The fuse protects the electronic device from overcurrent and also protects the electronic device from serious damage caused by internal faults. Therefore, each fuse has a rated specification, and the fuse will blow when the current exceeds the rated specification. If the fuse is correctly placed in the circuit, the fuse will cut off the current abnormally rises to a certain height and a certain temperature, thereby protecting the safe operation of the circuit. 7. Range of use: can be directly connected to the line of vehicle / ships free electrical appliances [such as: Car dome light, car headlights, sight wide light, fog lamp, warning lamp, vehicle refrigerator, car charger, car fan, car TV. 8. Product Advantage: The product adopts PBT anti-flame-resistance, high-low temperature and environmental protection materials, which fully meets [the fuse holder must have good mechanical strength, insulation, heat resistance and flame retardancy, and should not be broken during use. Conditions of deformation, combustion, short circuit, etc. Specification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 18cm * 14cm * 4cm / 7.09inch * 5.51inch * 1.57inch Qty per Carton 40 Carton Weight 8.74kgs / 19.27lb Carton Size 38cm * 36cm * 32cm / 14.96inch * 14.17inch * 12.6inch Loading Container 20GP: 609 cartons * 40 pcs = 24360 pcs40HQ: 1414 cartons * 40 pcs = 56560 pcs

Leer Más Menos

1. 170 degree super wide angle lens. 2. 2304*1296/30fps high definition resolution. 3. Advanced H.264 video compression technology. 4. 2.7 inch high resolution LCD screen, can view while recording. 5. Support HDMI high quality video transmission. 6. G-Sensor to keep the record of sensor data at emergency cannot be cover. 7. Loop recording with seamless, does not leak second. 8. Automatic circulating recording, ita??s able to set the record time for each file. 9. Watching video simultaneous while driving, supporting on-spot play back. 10.Time & date display changed, there is no need to reset when re-starts. 11. A key to lock function 12. Motion detection function 13. Automatically turn on/off function 14. Can charge and transmission through USB. 15. Equipped with special car fixed sucker, easy to fix and use. 16. Maximum memory storage 64GB, or TF with more high capacity storage device(not included the card).Specification: General Model GS90C Display 2.7 inch LCD Display Resolution 2304*1296 30P Maximum Support Card TF Card, 64GB (not included) Video Format MP4 Operating Language English, Russian, Simplified Chinese, Traditional Chinese, French, Dutch, Polish, Czech Battery 190mAh Chip Ambarella A7LA70 Photo Format JPG Decode Format H.264 Power Supply 5V / 1.5A Size 86*52*38mm Weight 73g Camera Camera Pixels 5.0MP Lens Angle 170 Degrees Package Include Package Contents 1 x Car DVR 1 x Car Charger 1 x USB Cable 1 x User Manual 1 x Holder Package Weight One Package Weight 0.43kgs / 0.95lb One Package Size 17.5cm * 13.5cm * 8.5cm / 6.89inch * 5.31inch * 3.35inch Qty per Carton 30 Carton Weight 13.60kgs / 29.98lb Carton Size 51cm * 36cm * 37cm / 20.08inch * 14.17inch * 14.57inch Loading Container 20GP: 392 cartons * 30 pcs = 11760 pcs40HQ: 911 cartons * 30 pcs = 27330 pcs

Leer Más Menos

1. For 2021 and 2022 Tesla Model 3/Y2. 1 Type-C port, 2 USB 3.0 ports, can charge multiple devices at the same time3. Embedded installation does not affect the opening and closing of the cover, and the installation fit is 99%4. Dual USB-A data transmission, allowing two gamers to play at the same time (Note: 2021, versions after November 6 do not support data transmission)5. Push-pull design: Push and pull to open when in use, and close when not in use, preventing vehicle short circuit and preventing dust from falling, causing electronic devices not to be plugged in6. LED lighting, make your search easierparameter:1. Rated voltage: 3.7V DC2. Charging power: 27W Max3. Interface: USB x 2+Type-C x 14. Material: ABS+PC5. Output power:-USB-A x 2: data transmission/1.5A current (MAX)-Type-c: does not support data transmission/27W(MAX)6. Product size: 192.5 x 32 x 22mm7. Product gross weight: 108GSpecification: General Compatible with Tesla: Model Y, Model 3 Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 15cm * 9cm * 4cm / 5.91inch * 3.54inch * 1.57inch Qty per Carton 100 Carton Weight 12.00kgs / 26.46lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 100 pcs = 52200 pcs40HQ: 1212 cartons * 100 pcs = 121200 pcs

Leer Más Menos

About The Product1. This Radar detector features a laser eye detector for a 360 degree laser detection and easy to install. 2. This Radar can Detect any stable or mobile Radia Speed Monitor 250-2500m ahead. 3. Extreme Range Super heterodyne technology, with super-fast sweep circuitry, provides extra detection range and the best possible advance warning to even the fastest radar guns. 4. Detects Ku Band radar gun currently being used in Europe.Detects the latest pop mode radar gun (super-fast instant on mode) 5. Relative speed sensing auto mute system that virtually eliminates false alerts.Provides complete immunity to VG-2 radar detector-detectors. 6. Relative speed sensing auto shutdown feature will render your detector undetectable by currently available radar detector-detectors. 7. Electronically remembers radar detector setting for an indefinite period of time even with the power remove.Notices1. Please install the detector properly following the user manual. A rule must be complied with is in whatever way the detector installed, it must not impair the motorist view or increase the risk of an accident. 2. Depending on your car, the power supply of the cigarette lighter socket would be continuous or can be switched on/off by your ignition switch. So before you leaving the car, confirm the status of the detector. Do not leave the detector alone to be longtime running, this may lead to complete consumption of car battery or shorten the life of the detector. 3. Before leaving your car, always remember to conceal your detector in a safe place. To avoid the possibility of break? In theft or distortion of shape due to the heat of longtime exposure in the sun(sometime the temperature in car would be a hundred Celsius or above in Summer) 4 Do not disconnect the detector from PC in the whole process of updating. Or this may result in the instability of system. 5. Use standard 12V DC power supply to the detector. Nothing should cover or overlie the detector while in use.Specifications1. Material: ABS 2. Laser beam: 90-433KMHz 3. VG-2: 11.150GHz-410MHz 4. Wireless duplex transmission frequency: 2.4GHz-410MHz 5. Language:Russian + English 6. Voltage: DC 12V 7. Current: 150 - 300MA 8. Power: 60 watts 9. Product size: 97x60x31mm 10. Package Include: - V7 Radar detector x 1 - Car Charger x 1 - Non Slip Mat x 1 - User Manual x 1Bands1. X-BAND: 10.525GHz100MHz, detectable distance: 1500-2500m 2. K-BAND: 24.150GHz175MHz, detectable distance: 1200-2500m 3. Trfor iPod K-BAND: 24.150GHz175MHz, detectable distance: 250-1200m 4. KU-BAND: 13.450GHz125MHz, detectable distance: 450-1500m 5. KA-BAND: 34.700GHz1300MHz, detectable distance: 800-1500m 6. Trfor iPod KA-BAND: 33.400GHz1300MHz, detectable distance: 200-600mSpecification: Package Weight One Package Weight 0.16kgs / 0.34lb One Package Size 12cm * 7.5cm * 6.5cm / 4.72inch * 2.95inch * 2.56inch Qty per Carton 40 Carton Weight 17.80kgs / 39.24lb Carton Size 50cm * 41cm * 36cm / 19.69inch * 16.14inch * 14.17inch Loading Container 20GP: 361 cartons * 40 pcs = 14440 pcs40HQ: 838 cartons * 40 pcs = 33520 pcs

Leer Más Menos

Feature:1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.3. Working voltage: 100V-240V / 12V4. Power: 20WHow to use the PDR tools:1. Clean the dent and keep it dry2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear5. Vlean the surface with cleaning tools set6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level7. If the dent and convex surface are still existent, repeat the steps above, until you are satisfied with itPackage list:Arc Crowbar x 1M10 screw x 1M10 nut x 1M10 Handle Nut x 1Puller adapter x 1M8 Multi-directional stander x 1Purple tabs x 24Yellow glue sticks x 10White glue sticks x 10Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5mHammer x 1Knock down pen x 1Pen heads x 9Towel x 1Shovels x 2Alcohol bottle（alcohol not include) x 1English manual x 1Specification: Package Weight One Package Weight 2.05kgs / 4.53lb One Package Size 58cm * 12cm * 8cm / 22.83inch * 4.72inch * 3.15inch Qty per Carton 12 Carton Weight 26.10kgs / 57.54lb Carton Size 62cm * 38cm * 32cm / 24.41inch * 14.96inch * 12.6inch Loading Container 20GP: 353 cartons * 12 pcs = 4236 pcs40HQ: 821 cartons * 12 pcs = 9852 pcs

Leer Más Menos

1. Material: PBT body, PC waterproof dust cover, nickel-plated copper connection terminal. 2. Input rated voltage: 32V 3. Input rated current: 100A 4. Output maximum current: 30A per circuit 5. Indicator function: When the red LED is lit, it means the fuse has been disconnected, you need to replace the fuse in time to continue running. 6. Fuse function: When the circuit malfunctions or is abnormal, the current is continuously increased, and the increased current may damage some important devices or valuable devices in the circuit, and may also burn the circuit or even cause a fire. The fuse protects the electronic device from overcurrent and also protects the electronic device from serious damage caused by internal faults. Therefore, each fuse has a rated specification, and the fuse will blow when the current exceeds the rated specification. If the fuse is correctly placed in the circuit, the fuse will cut off the current abnormally rises to a certain height and a certain temperature, thereby protecting the safe operation of the circuit. 7. Range of use: can be directly connected to the line of vehicle / ships free electrical appliances [such as: Car dome light, car headlights, sight wide light, fog lamp, warning lamp, vehicle refrigerator, car charger, car fan, car TV. 8. Product Advantage: The product adopts PBT anti-flame-resistance, high-low temperature and environmental protection materials, which fully meets [the fuse holder must have good mechanical strength, insulation, heat resistance and flame retardancy, and should not be broken during use. Conditions of deformation, combustion, short circuit, etc. Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 18cm * 14cm * 4cm / 7.09inch * 5.51inch * 1.57inch Qty per Carton 40 Carton Weight 5.50kgs / 12.13lb Carton Size 38cm * 36cm * 32cm / 14.96inch * 14.17inch * 12.6inch Loading Container 20GP: 609 cartons * 40 pcs = 24360 pcs40HQ: 1414 cartons * 40 pcs = 56560 pcs

Leer Más Menos

Feature:1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.3. Working voltage: 100V-240V / 12V4. Power: 20WHow to use the PDR tools:1. Clean the dent and keep it dry2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear5. Vlean the surface with cleaning tools set6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level7. If the dent and convex surface are still existent, repeat the steps above, until you are satisfied with itPackage list:Arc Crowbar x 1M10 screw x 1M10 nut x 1M10 Handle Nut x 1Puller adapter x 1 M8 Multi-directional stander x 1Rubber Hammer x 1Knock down pen with 9pcs pen heads x 1Purple tabs x 24Blue tabs x 18Red tabs x 10Hook rods x 3Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5mYellow glue sticks x 10White glue sticks x 10Towel x 1Shovels x 2Alcohol bottle（alcohol not include) x 1Tool bag x 1English manual x 1Specification: Package Weight One Package Weight 2.57kgs / 5.67lb One Package Size 58cm * 13cm * 10cm / 22.83inch * 5.12inch * 3.94inch Qty per Carton 4 Carton Weight 11.78kgs / 25.97lb Carton Size 62cm * 28cm * 24cm / 24.41inch * 11.02inch * 9.45inch Loading Container 20GP: 640 cartons * 4 pcs = 2560 pcs40HQ: 1485 cartons * 4 pcs = 5940 pcs

Leer Más Menos

Feature:1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.3. Working voltage: 100V-240V / 12V4. Power: 20WHow to use the PDR tools:1. Clean the dent and keep it dry2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear5. Vlean the surface with cleaning tools set6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level7. If the dent and convex surface are still existent, repeat the steps above，until you are satisfied with itPackage list:Arc Crowbar x 1M10 screw x 1M10 nut x 1M10 Handle Nut x 1Puller adapter x 1 M8 Multi-directional stander x 1Slide hammer x 1Rubber Hammer x 1Gold puller x 1Knock down pen with 9pcs pen heads x 1Purple tabs x 24Blue tabs x 18Red tabs x 10Hook rods x 3Dent checking board x 1Stander x 15m USB cable x 1Stainless steel slot x 2 Linear glue tabs x 4Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5mYellow glue sticks x 10White glue sticks x 10Towel x 1Shovels x 2Alcohol bottle（alcohol not include) x 1Tool bag x 1English manual x 1Specification: Package Weight One Package Weight 5.13kgs / 11.31lb One Package Size 58cm * 23cm * 16cm / 22.83inch * 9.06inch * 6.3inch Qty per Carton 4 Carton Weight 22.00kgs / 48.50lb Carton Size 62cm * 48cm * 34cm / 24.41inch * 18.9inch * 13.39inch Loading Container 20GP: 263 cartons * 4 pcs = 1052 pcs40HQ: 611 cartons * 4 pcs = 2444 pcs

Leer Más Menos

Feature:1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.3. Working voltage: 100V-240V / 12V4. Power: 20WHow to use the PDR tools:1. Clean the dent and keep it dry2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear5. Vlean the surface with cleaning tools set6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level7. If the dent and convex surface are still existent, repeat the steps above, until you are satisfied with itPackage list:Arc Crowbar x 1M10 screw x 3M10 nut x 3M10 Handle Nut x 3Puller adapter x 3M8 Multi-directional stander x 1Stainless steel slot x 2Blue linear tab x 4Green linear tab x 4Purple tabs x 24Blue tabs x 18Red tabs x 10Yellow glue sticks x 10White glue sticks x 10Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5mHammer x 1Knock down pen x 1Pen heads x 9Nylon pen x 5Towel x 1Shovels x 2Alcohol bottle（alcohol not include) x 1English manual x 1Specification: Package Weight One Package Weight 2.84kgs / 6.26lb One Package Size 58cm * 13cm * 10cm / 22.83inch * 5.12inch * 3.94inch Qty per Carton 4 Carton Weight 12.84kgs / 28.31lb Carton Size 62cm * 28cm * 24cm / 24.41inch * 11.02inch * 9.45inch Loading Container 20GP: 640 cartons * 4 pcs = 2560 pcs40HQ: 1485 cartons * 4 pcs = 5940 pcs

Leer Más Menos

Feature:1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.3. Working voltage: 100V-240V / 12V4. Power: 20WHow to use the PDR tools:1. Clean the dent and keep it dry2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear5. Vlean the surface with cleaning tools set6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level7. If the dent and convex surface are still existent, repeat the steps above，until you are satisfied with itPackage list:Arc Crowbar x 1M10 screw x 1M10 nut x 1M10 Handle Nut x 1Puller adapter x 1 M8 Multi-directional stander x 1Slide hammer x 1Rubber Hammer x 1Gold puller x 1Knock down pen with 9pcs pen heads x 1Purple tabs x 24Blue tabs x 18Red tabs x 10Hook rods x 3Stainless steel slot x 2 Linear glue tabs x 4Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5mYellow glue sticks x 10White glue sticks x 10Towel x 1Shovels x 2Alcohol bottle（alcohol not include) x 1Tool bag x 1English manual x 1Specification: Package Weight One Package Weight 4.28kgs / 9.43lb One Package Size 58cm * 23cm * 15cm / 22.83inch * 9.06inch * 5.91inch Qty per Carton 4 Carton Weight 18.60kgs / 41.01lb Carton Size 62cm * 48cm * 32cm / 24.41inch * 18.9inch * 12.6inch Loading Container 20GP: 280 cartons * 4 pcs = 1120 pcs40HQ: 650 cartons * 4 pcs = 2600 pcs

Leer Más Menos

Feature: 1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual. 2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money. 3. Working voltage: 100V-240V / 12V 4. Power: 20W How to use the PDR tools: 1. Clean the dent and keep it dry 2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes 3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes 4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear 5. Vlean the surface with cleaning tools set 6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level 7. If the dent and convex surface are still existent, repeat the steps above?ˉ????until you are satisfied with it Package list: Arc Crowbar x 1 M10 screw x 1 M10 nut x 1 M10 Handle Nut x 1 Puller adapter x 1 M8 Multi-directional stander x 1 Slide hammer x 1 Rubber Hammer x 1 Gold puller x 1 Knock down pen with 9pcs pen heads x 1 Glue tabs x 24 Stainless steel slot x 2 Linear glue tabs x 4 Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5m Yellow glue sticks x 10 White glue sticks x 10 Towel x 1 Shovels x 2 Alcohol bottle?ˉ????alcohol not include) x 1 Tool bag x 1 English manual x 1Specification: Package Weight One Package Weight 2.89kgs / 6.38lb One Package Size 58cm * 13cm * 10cm / 22.83inch * 5.12inch * 3.94inch Qty per Carton 6 Carton Weight 18.84kgs / 41.53lb Carton Size 62cm * 32cm * 24cm / 24.41inch * 12.6inch * 9.45inch Loading Container 20GP: 560 cartons * 6 pcs = 3360 pcs40HQ: 1300 cartons * 6 pcs = 7800 pcs

Leer Más Menos

Feature:1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.3. Working voltage: 100V-240V / 12V4. Power: 20WHow to use the PDR tools:1. Clean the dent and keep it dry2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear5. Vlean the surface with cleaning tools set6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level7. If the dent and convex surface are still existent, repeat the steps above, until you are satisfied with itPackage list:Arc Crowbar x 1M10 screw x 1M10 nut x 1M10 Handle Nut x 1Puller adapter x 1M8 Multi-directional stander x 1Stainless steel slot x 2Blue linear tab x 4Purple tabs x 24Yellow glue sticks x 10Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5mTowel x 1Shovels x 2Alcohol bottle（alcohol not include) x 1English manual x 1Specification: Package Weight One Package Weight 2.17kgs / 4.78lb One Package Size 58cm * 13cm * 10cm / 22.83inch * 5.12inch * 3.94inch Qty per Carton 4 Carton Weight 10.16kgs / 22.40lb Carton Size 62cm * 28cm * 24cm / 24.41inch * 11.02inch * 9.45inch Loading Container 20GP: 640 cartons * 4 pcs = 2560 pcs40HQ: 1485 cartons * 4 pcs = 5940 pcs

Leer Más Menos