Resultados de la búsqueda de "nursery electronics"

Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

1. Double folding adjustment design, height and angle can be adjusted arbitrarily. 2. Both mobile phones and tablets are available, compatible with devices within 12 inches. 3. It is small and does not take up space, thin and light, and easy to carry. 4. The base is designed with non-slip silicone cushion, which is stable and does not scratch the table. 5. Reserved charging port design, more convenient to use. 6. Double-sided screws form strong resistance to prevent falling. 7. The height of the arc edge of the groove is low, and the subtitles are not blocked. 8. Material: Aluminum Alloy + Silicone 9. Dimensions: 158 x 70 x 13mm 10. Weight: 145gSpecification: General Compatible with Apple: iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone SE 2020, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5, iPad Apple: iPad 10.2 (2021), iPad mini 6, iPad Pro 11 (2021), iPad 10.2 (2020), iPad Air 2020 10.9, iPad Pro 11 inch (2020), iPad 10.2 (2019), iPad mini (2019) / mini 5, iPad Air （2019）, iPad Pro 10.5 (2019), iPad Pro 11 inch （2018）, iPad 9.7 (2018), iPad Pro 10.5 inch (2017), iPad 9.7 inch (2017), iPad Pro 9.7 inch, iPad mini 4, iPad mini 3, iPad Air 2, iPad Air, iPad mini with Retina display, iPad mini 2, iPad 4, iPad mini, New iPad (iPad 3) Samsung: Galaxy M32, Galaxy M62, Galaxy A72 5G, Galaxy S21 Ultra 5G, Galaxy A02s, Galaxy A12, Galaxy S20 FE 5G, Galaxy M21s, Galaxy M31s, Galaxy Note20, Galaxy A21s, Galaxy S20 Ultra 5G, Galaxy A31, Galaxy S20+, Galaxy M40s, Galaxy A20e, Galaxy A40, Galaxy A30, Galaxy S6 Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 18cm * 8cm * 2cm / 7.09inch * 3.15inch * 0.79inch Qty per Carton 100 Carton Weight 12.00kgs / 26.46lb Carton Size 36cm * 36cm * 20cm / 14.17inch * 14.17inch * 7.87inch Loading Container 20GP: 1028 cartons * 100 pcs = 102800 pcs40HQ: 2388 cartons * 100 pcs = 238800 pcs

Leer Más Menos

Funciones y características 1. Mini interruptor inalámbrico inteligente original de Xiaomi, asistente de vida doméstico diario funcional y creativo. 2. Tamaño de bolsillo pequeño, muy fácil de instalar y usar: primero, abra la aplicación Xiaomi Smart Home, haga clic en el "+" en la esquina superior derecha de su teléfono y agregue el mini interruptor inalámbrico inteligente Xiaomi, y presione el orificio de reinicio del mini interruptor inalámbrico de acuerdo con el mensaje de voz. 3. Después de establecer vínculos entre el interruptor inalámbrico y el portal multifunción, con solo hacer clic en el interruptor, la lámpara inteligente o luz nocturna se enciende y suena. Por lo tanto, por la mañana, es una ayuda para despertar a sus hijos mientras está preparando el desayuno en la cocina. Y a la medianoche, es un compañero considerado para ayudarlo a encontrar el camino al baño. 4. Combinando el enchufe inteligente Xiaomi y la configuración de la escena de enlace, tienes el acceso para cortar todos los equipos eléctricos con solo un clic en el interruptor cuando sales o te preparas para dormir. 5. La carcasa está hecha de material anti-UV de alta calidad, apariencia moderna y duradera. Consejos útiles Este artículo forma un conjunto completo con la puerta de enlace multifuncional inteligente original de Xiaomi. Especificación: Peso del paquete Peso de un paquete 0,05 kg/0,12 lb Un tamaño de paquete 10 cm x 8 cm x 3 cm (3,94 pulgadas x 3,15 pulgadas x 1,18 pulgadas) Cantidad por caja 200 Peso de la caja 9,50 kg/20,94 lb Tamaño de la caja 47 cm x 42 cm x 32 cm (18,5 pulgadas x 16,54 pulgadas x 12,6 pulgadas) Contenedor de carga 20GP: 422 cajas * 200 piezas = 84400 piezas 40HQ: 980 cajas * 200 piezas = 196000 piezas

Leer Más Menos

Característica: 1. Puede probar la intensidad del campo eléctrico y la intensidad del campo magnético para alcanzar el resultado de prueba óptimo. Se utiliza ampliamente para probar y conocer la situación de la radiación electromagnética en interiores y exteriores. Adecuado para medir la máquina generada electromagnéticamente, medir electrodomésticos de baja frecuencia y electrodomésticos de radiación de alta frecuencia. 2. Un instrumento con dos usos, puede probar el campo eléctrico y la radiación del campo magnético al mismo tiempo. 2. Alarma de luz y sonido: cuando el resultado de la prueba excede el valor seguro, el instrumento emitirá una alarma automáticamente. 3. Bloqueo de datos, bloqueo con una tecla del valor de radiación y fácil lectura del valor. 4. Medir la temperatura ambiente: con 2 unidades de temperatura (Celsius y Fahrenheit). 5. Evaluación de la radiación, le recuerda si el valor de la radiación es seguro o no. 6. Diseño de moda, fácil operación manual, es fácil de transportar y realizar mediciones de campo. Presupuesto: 1. Material: plástico ABS 2. Unidad: V/m (campo eléctrico), micro T/mG (campo magnético) 3. Precisión: eléctrica: 1 V/m, magnética: 0,01 micro T/0,1 mG 4. Rango: Eléctrico: 1-1999 V/m, Magnético: 0,01-99,99 micro T / 0,1-999,9 mG 5. Umbral de alarma: Eléctrico: 40 V/m, Magnético: 0,4 micro T/4 mG 6. Pantalla: Pantalla LCD de 3-1/2" 7. Ancho de banda de prueba: 5 Hz-3500 MHz 8. Tiempo de muestreo: aproximadamente 0,4 segundos 9. Modo de prueba: Prueba síncrona bimódulo 10. Indicación de sobrecarga: Valor máximo del rango de medición en la pantalla LCD 11. Temperatura de funcionamiento: 0-50 grados Celsius 12. Humedad de funcionamiento: humedad relativa inferior al 80 % 13. Voltaje de funcionamiento: 3,7 V 14. Fuente de alimentación: batería de litio de 3,7 V 600 mAh 15. Tamaño: 134 x 61 x 25 mm 16. Peso: 131,3 g Especificación: Peso del paquete Peso de un paquete 0,22 kg/0,49 lb Un tamaño de paquete 18 cm x 12 cm x 6 cm (7,09 pulgadas x 4,72 pulgadas x 2,36 pulgadas) Cantidad por caja 60 Peso de la caja 16,50 kg/36,38 lb Tamaño de la caja 48 cm x 42 cm x 38 cm (18,9 pulgadas x 16,54 pulgadas x 14,96 pulgadas) Contenedor de carga 20GP: 348 cartones * 60 uds. = 20880 uds. 40HQ: 808 cajas * 60 piezas = 48480 piezas

Leer Más Menos

1. Pantalla: Pantalla IPS HD de 7 pulgadas 2. Píxeles: 20 millones de píxeles 3. Aumento: 0-2000x 4. Rango de enfoque: 0-60 mm 5. Resolución de imagen 4032*3024P 6. Resolución de vídeo 1920*1080P 7. Fuente de luz: 10 LED brillantes y 1 LED superbrillante 8. Formato de imagen: JPG 9. Formato de vídeo: MOV 10. Fuente de alimentación: 2600 mAh 11. Tiempo de trabajo: más de 2 horas. 12. Tiempo de carga: 3,5 horas o más 13. Sistemas compatibles: Windows XP, Vista, Win7/8/10, Mac 10.5 y superiores 14. Idioma: chino simplificado, chino tradicional, japonés, inglés, coreano, francés, italiano, alemán, español y ruso. 15. Modo de suministro de energía: corriente continua USB y fuente de alimentación de batería 18650 16. Con almohadillas antideslizantes para los pies, la observación es más estable. 17. Lente de detección de metales 500X: adecuada para mantenimiento e inspección de placas de circuitos, inspección de impresión, identificación de jade y piedras preciosas, etc. 18. Detector de metales 2000X: adecuado para observación microbiana, observación de secciones y observación de enfermedades de plantas e insectos. 19. Tamaño: aproximadamente 26x21x16 cm 20. Peso: alrededor de 1350 gramos. Lista de embalaje: 1. Microscopio 2. Lente de baja potencia 3. Lente de alta potencia 4. Instrucciones 5. Diapositiva x2 6. Cable de datos x2 7. Paño de limpieza 8. Caja de embalaje Especificación: Peso del paquete Peso de un paquete 1,67 kg/3,68 lb Un tamaño de paquete 27,5 cm x 22 cm x 16 cm (10,83 pulgadas x 8,66 pulgadas x 6,3 pulgadas) Cantidad por caja 3 Peso de la caja 5,00 kg/11,02 lb Tamaño de la caja 46 cm x 35 cm x 24 cm (18,11 pulgadas x 13,78 pulgadas x 9,45 pulgadas) Contenedor de carga 20GP: 690 cajas * 3 piezas = 2070 piezas 40HQ: 1602 cajas * 3 piezas = 4806 piezas

Leer Más Menos

1. Driver chip: SSD13062. Interface: 3-wire SPI, 4-wire SPI, I2C3. Resolution: 128*644. Display size: 0.96 inch5. Colors: 1/4 yellow section, 3/4 blue section6. Visible angle: >160 degree7. Operating temperature: -30~70 degree C8. Storage temperature: -30~80 degree C9. Operating voltage: 3.3V / 5VSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Leer Más Menos

1. Material: ABS+Silicone2. DC voltage: 10mV~1000V3. AC voltage (VFC): 10mV~750V4. DC current (mA): 0.01mA~600mA5. DC current (10A): 0.001A~10A6. AC current (mA): 0.03mA~600mA7. AC current (10A): 0.030A~10A8. Resistance: 0.1Ω~60ΜΩ9. Capacitance: 0.01nF~60mF10. Temperature: -40°C~1000℃11. Frequency: 10Hz-6MHz12. Duty cycle: 0.1%~99.9%13. Battery model: 1000mAh 3.7V lithium battery14. VA color reverse display screen, you can see the value clearly in dark environment15. The back support frame allows you to stand and work, making the measurement faster16. Built-in double fuse, multi-directional anti-burn protection, automatic identification to avoid misoperation to achieve anti-burn protection, and safer current measurement17. Press the N/L key to switch to NCV mode. When AC voltage is detected, a buzzer alarm sounds. The closer the distance, the more urgent the alarm18. In Live mode, the neutral and live wires are judged. The live wire indicator light is on and accompanied by a buzzer, and the neutral wire indicator light is off without a buzzer19. The charging indicator light is red, and the full indicator light is green. It is equipped with a Type-c charging cable20. Long press to turn on the flashlight, you can see the measured object clearly in a dark environment, and illuminate the front for you without fear of electric shock risks21. The meter automatically shuts down after about 15 minutes without any operation22. Weight: 188g23. Size: 13.8x7x2.8cm24. Packing list: multimeter; test lead wire; storage bag; temperature wire; charging cable; instruction manual; packaging boxSpecification: Package Weight One Package Weight 0.39kgs / 0.86lb One Package Size 21cm * 13cm * 6cm / 8.27inch * 5.12inch * 2.36inch Qty per Carton 60 Carton Weight 24.00kgs / 52.91lb Carton Size 49cm * 42cm * 37cm / 19.29inch * 16.54inch * 14.57inch Loading Container 20GP: 350 cartons * 60 pcs = 21000 pcs40HQ: 812 cartons * 60 pcs = 48720 pcs

Leer Más Menos

1. Professional musical instrument tuner.2. Widely used, suitable for tuning guitar, bass, violin and ukulele.3. The buzzer vibration picks up accurately.4. Super anti-interference, sensitive and stable.5. Smart power saving.6. The shell is made of PC material.7. Portable digital clip type, easy to clip on any stringed instrument.8. Its clip part can be easily rotated 360 degrees to locate the correct viewing angle of the LCD screen.9. Tuning mode:- C mode (twelve equal law)- G mode (guitar mode)- B mode: bass mode- V mode: violin mode- U mode: Ukulele modeSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs

Leer Más Menos

1. Material: Environmentally friendly ABS material2. Control method: voice3. Working voltage: 5V/1A4. Interface: USB5. Power source: USB connection power6. Wireless distance: 10m7. Offline voice control, no need to download APP, networking and other operations, plug and play8. Memory algorithm with surround design infrared remote control, intelligent control, easy to use9. The USB interface is connected to the power supply, which is easy to use10. Small size, easy to carry11. Dimensions: 7.6 x 3.1 x 1.8 cmSpecification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 10cm * 4.5cm * 5cm / 3.94inch * 1.77inch * 1.97inch Qty per Carton 50 Carton Weight 30.00kgs / 66.14lb Carton Size 36cm * 16cm * 18cm / 14.17inch * 6.3inch * 7.09inch Loading Container 20GP: 2572 cartons * 50 pcs = 128600 pcs40HQ: 5970 cartons * 50 pcs = 298500 pcs

Leer Más Menos

1. Capable of charging 2 batteries simultaneously. 2. Each of the two battery slots monitors and charges independently. 3. Optimized charging design for IMR batteries. 4. Integrated LCD panel clearly displays charging parameters and progress. 5. Two conveniently located side buttons allow easy selection of specific battery types and charging parameters. 6. Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt). 7. Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection). 8. Compatible with LiFePO4 batteries. 9. Compatible with small capacity batteries. 10. Automatically stops charging when complete. 11. Features over-charge prevention to protect batteries. 12. Features temperature monitoring to prevent overheating. 13. Made from durable ABS (fire retardant / flame resistant). 14. Features reverse polarity protection. 15. Designed for optimal heat dissipation. 16. Compatible with Li-ion / IMR / LiFePO4: 10440, 14500, 16340 (RCR123), 17500, 17670, 18350, 18490, 18650, 22650, 26650, Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries (Note: All batteries are not included). 17. Input voltage: - AC 100-240V 50/60 Hz 0.25A (MAX) - DC 12V 1A 18. Output voltage: 4.2V +/- 1% / 3.7V +/- 1% / 1.48V +/- 1% 19. Output current: 500mA x 2 20. Certified by RoHS, CE, FCC, CEC.Specification: General Product Material ABS Product Size 14.4x7.5x3.6cm Product Weight 162g Charger Parameters Model D2 Input Voltage AC 100-240V 50/60Hz Charger Plug US Plug Package Weight One Package Weight 0.32kgs / 0.70lb One Package Size 17cm * 13.5cm * 5cm / 6.69inch * 5.31inch * 1.97inch Qty per Carton 40 Carton Weight 13.20kgs / 29.10lb Carton Size 52cm * 29cm * 36cm / 20.47inch * 11.42inch * 14.17inch Loading Container 20GP: 491 cartons * 40 pcs = 19640 pcs40HQ: 1140 cartons * 40 pcs = 45600 pcs

Leer Más Menos

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

1. It can measure and display 6 parameters such as AC voltage, AC current, active power, power factor, frequency and electric energy at the same time\2. The instrument display part adopts color high-definition LCD screen3. Auto-save function: When the power is off, the meter will automatically save the current energy value, and the meter will read the value after the next power-on, and continue to accumulate4. Measurement speed: about 2 times/second5. Dimensions: 79x43x48mmMeasuring range:1. AC voltage: AC80.0-300.0V, or AC200.0-450.0V2. AC current: AC0－99.99A, the current display resolution is 0.01A, when it exceeds 100A, it displays 100.0A3. Power frequency: 45.0Hz-65.0Hz4. Power factor: 0.00-1.00PF5. Active power: The measurement range is 0-45000W (the display resolution between 0-9999.9W is 0.1W, the rest is 1W)6. Electric energy: The measuring range is 0-99999kwhHow to use and connect1. Connect according to the wiring diagram in the attached picture, connect the secondary end of the current transformer with the instrument (green lead) to the blue terminal of the instrument, and pass the wire of the measurement loop through the middle round hole of the current transformer2. Connect the voltage measurement lead to the green terminal of the meter; then connect the measurement voltage; start reading the measurement results3. After the power is turned on, the meter displays the measured value4. Press and hold the reset button on the front panel of the instrument for 5 secondsSpecification: Package Weight One Package Weight 0.12kgs / 0.25lb One Package Size 10cm * 6.5cm * 6.5cm / 3.94inch * 2.56inch * 2.56inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch Loading Container 20GP: 644 cartons * 98 pcs = 63112 pcs40HQ: 1495 cartons * 98 pcs = 146510 pcs

Leer Más Menos