Resultados de la búsqueda de "industrial electronics"

1. Material: ABS/PVC/Silicone2. AC voltage: 0V-1000V3. DC voltage: 0V-750V4. Capacitance: 0nF-99.99mF5. Resistance: 0Ω-19.99MΩ6. Frequency: 9.999Hz-999.9kHz7. Count: 199998. Insulation resistance measurement: connect the test leads, select the voltage range on the dial, press TIME to set the time, press TEST to start, and the test is complete when the triangle indicator light goes out.9. Polarization index (PI) Measurement: the polarization index is measured because insulation is sensitive to temperature and humidity. Initial measurements are inaccurate due to interference current. Long-term measurement and calculation of this index are necessary to assess insulation quality and aging.10. Absorption ratio (DAR) Measurement: determines if moisture affects the insulation resistance value of the device by measuring the insulation resistance value after 1 minute and the insulation resistance absorption ratio after 15 seconds.11. Powered by three 3.7V 14500 batteries, removable and rechargeable with a charger. After fully charging, reinstall the batteries in the meter for recycling and extended battery life (batteries not included in shipment).12. If the meter remains inactive for approximately 15 minutes, it will automatically shut down and enter sleep mode, saving power and providing peace of mind.13. Weight: 375g14. Dimensions: 18x9x5.6cmSpecification: Package Weight One Package Weight 0.78kgs / 1.72lb One Package Size 27cm * 13cm * 7cm / 10.63inch * 5.12inch * 2.76inch Qty per Carton 8 Carton Weight 7.30kgs / 16.09lb Carton Size 29cm * 28cm * 30cm / 11.42inch * 11.02inch * 11.81inch Loading Container 20GP: 1094 cartons * 8 pcs = 8752 pcs40HQ: 2541 cartons * 8 pcs = 20328 pcs

Leer Más Menos

Overview1. This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.2. Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.Features1. Easy to use, requires no knowledges of image recognition2. Decodes various common 1D/2D codes such as Barcode, QR code etc.3. Onboard micro USB and UART serial port, allows to connect with computers or embedded devices4. Configurable via scanning configuration code5. Onboard light source, works in the darkSpecifications1. Operating voltage: 5V2. Operating current: 135mA (scanning), 58mA (standby), 2mA (sleep)3. Operating temperature: 0°C~60°C4. Operating humidity: 5%~95% (Non-condensing)5. Communication interface: UART, USB6. Decodes 1D codes: Codebar, Code 11, Code 39/Code 93, UPC/EAN, Code 128/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI Code, Industrial 2 of 5, GS1 Databar(RSS)7. Decodes 2D codes: QR code, Data Matrix, PDF4178. Light source: white9. Scan angels: roll 360°, skew ±65°, pitch ±60°10. Field of view: 28° (horizontal), 21.5° (vertical)11. Dimension: 53.3mm x 21.4mm12. Package contents:- Barcode Scanner Module x1- USB type A plug to micro B plug cable x1- PH2.0 4Pin x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 8cm * 4cm * 2cm / 3.15inch * 1.57inch * 0.79inch Qty per Carton 1400 Carton Weight 134.40kgs / 296.30lb Carton Size 56cm * 40cm * 40cm / 22.05inch * 15.75inch * 15.75inch Loading Container 20GP: 297 cartons * 1400 pcs = 415800 pcs40HQ: 690 cartons * 1400 pcs = 966000 pcs

Leer Más Menos

About The ProductThe Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network. 1. New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278 2. EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server 3. Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico)Specifications1. RF chip: SX1262 2. Frequency range: EU868 (863~870MHz) 3. Modulation: LoRa/(G)FSK 4. Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK) 5. Emit power: More than 14dBm 3.3V 6. Spreadind factor: SF5 ~ SF12 7. Operating voltage: 3.3V 8. Module power consumption: Emitting current: 45mA 14dBm; receiving current: 5.3mA 125KHz 9. Communication bus: SPI 10. Operating temperature: -40 ~ 85 degree C 11. Connector: Castellated edge / solder holes 12. Dimensions: 21.00 x 52.00mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 1000 pcs = 328000 pcs40HQ: 763 cartons * 1000 pcs = 763000 pcs

Leer Más Menos

About The Product1. LINEPAUDIO A967 Passive PreAmp Active Speak Volume Two-Channel Controller is small and compact, applicable to use with active speaker or PostAmp, supports full-balanced or single-ended signal I/O, equipped with a switch for easily switching I/O signal. 2. Infinitely picky about the sound quality, infinitely tolerant on music. Passive PreAmp Volume Controller makes the desktop simple. 3. Small size but great wisdom, LINEPAUDIO A967 is tiny but with a complete set of common interfaces, supports full-balanced audio signal regulation and single-ended audio signal regulation, and switches I/O signal. 4. Suitable for the decoder and speaker without volume regulation, with the balanced I/O, RCA I/O architecture and switch function enabled. Its PreAmp will not cause a loss of signal source. In general, the audio source signals out of the decoder reproduces the original signals. The large dynamic range will not cause a quality loss, but keep the original signal source intact. 5. The preferred choice of active speaker, more and more music fans are not satisfied with the sound quality performance of common multimedia speakers, but rather select professional active monitor speakers. But such speakers generally don't have a volume regulation knob, but have to use with PreAmp. Most active monitor headphones are used for the desktop near-field listening, but a common HiFi PreAmp is large and occupies a large area. Moreover, most are concerned about whether the timbre of PreAmp matches the speaker or not, whether the sound effect is ideal or not. 6. But from now on, LINEPAUDIO A967 Two-Channel Volume Controller perfectly addresses the above two concerns, LINEPAUDIO A967 is small and compact, the internal circuit architecture design will not cause a loss of sound quality, the internal power amplifier of active speaker is enough to drive the speaker, so that you can hear the most genuine timbre and quality of the speaker, free from the need of choosing a suitable PreAmp.Features1. Input/Output impedance: 10Kohms - 50Kohms. 2. Two-channel I/O switch, RCA and Balanced XRL I/O. 3. Input: RCA / Balanced XLR (switch). 4. Output: RCA / Balanced XLR (switch).Specification: General Model A967 Material Metal Size 145*65*43mm Weight 314g Package Weight One Package Weight 0.46kgs / 1.00lb One Package Size 20cm * 18cm * 5.5cm / 7.87inch * 7.09inch * 2.17inch Qty per Carton 20 Carton Weight 9.13kgs / 20.13lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 20 pcs = 11120 pcs40HQ: 1292 cartons * 20 pcs = 25840 pcs

Leer Más Menos

1. Material: ABS+PP+PC+Metal+Electronic Components 2. Operating Current: 5V/1A 3. Power Consumption: 5W 4. Power Socket: Type-C 5. Battery Capacity: 2400mAh 6. Battery Life: 0.8-3.2 hours 7. Charging Time: 4-5 hours 8. Ice-Cooling Pads for Instant Cooling 9. Noise-Absorbing Airflow and Shock-Damping Honeycomb Design 10. 100 Wind Speed Adjustments, 3-Second Rapid Cooling, Easily Foldable and PortableSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 14cm * 7cm * 5cm / 5.51inch * 2.76inch * 1.97inch Qty per Carton 150 Carton Weight 25.00kgs / 55.12lb Carton Size 52cm * 44cm * 37cm / 20.47inch * 17.32inch * 14.57inch Loading Container 20GP: 315 cartons * 150 pcs = 47250 pcs40HQ: 731 cartons * 150 pcs = 109650 pcs

Leer Más Menos

1. Weather forecast broadcast radio, support AM, FM, WB signal, can receive news and other channels2. 0.3W solar panel, manual power generation, multiple charging methods: solar energy, manual charging, USB port charging three charging methods3. LED torch lighting, radio for emergency needs can bring brightness to people in a dark environment4. FM radio function, strong radio signal, automatic radio reception, high sensitivity, and self-adaptive application, more radio stations, clear sound5. FM/AM/US Weather Band (optional) multi-band receiver6. Design 360-degree rod antenna, high sensitivity in each band7. 40mm 8 ohm 1 watt speaker, the volume is loud and clear8. There are corresponding indicator lights when tuning and charging, giving users a clear reminder9. Electronic tuning search platform, easy to operate, long switch life10. 3 LED lamp beads, in a dark environment, can bring bright11. With emergency alarm function, it can bring alarm sound to people in emergency12. It has the function of power pack, which is convenient for users to charge low-power phones outdoors13. ABS plastic material and spray rubber oil, with the characteristics of anti-dirty and wear-resistant14. Waterproof level: IPX315. Battery specification: 1200mAh16. Power supply mode: USB charging / built-in lithium battery / solar energy / hand power generation17. External charging output current: 1000mA18. Channel selection method: manual19. Working voltage: 2.7V-4.2V20. Signal to noise ratio: FM: 32dB, AM: 20dB21. Band type: multi-band22. Radio tuning method: Pointer type23. Receiving frequency range: FM: 87-108MHZ, AM: 520-1710KHZ, NOAA: 162.450-162.550 MHZ24. Encoding chip type: DSP25. Static current: 60 Vian26. Rated current: 400mA27. Rated power: 0.5W28. Receiving sensitivity: FM: 8dB, AM: 86dB29. Impedance: 32 ohms30. Material: ABS31. Audio channel: Dual channel32. Screen size: 31x3mm33. Dimensions: 128 x 60 x 45mm34. Weight: 238gSpecification: General Certificate CE Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 16cm * 8cm * 6cm / 6.3inch * 3.15inch * 2.36inch Qty per Carton 60 Carton Weight 18.00kgs / 39.68lb Carton Size 48cm * 32cm * 30cm / 18.9inch * 12.6inch * 11.81inch Loading Container 20GP: 578 cartons * 60 pcs = 34680 pcs40HQ: 1343 cartons * 60 pcs = 80580 pcs

Leer Más Menos

1. Highest real-time sampling rate: 1Msps2. Accuracy: 12Bit3. Sampling buffer depth: 1024 bytes4. Analog band width: 0-200KHz5. Vertical sensitivity: 5mV / Div – 20V / Div (progressive in 1-2-5 way)6. Adjustable vertical displacement with instructions7. Input impedance: 1MΩ8. Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)9. Coupling methods include: DC / AC / GND10. Horizontal time base range: 10μs / Div – 50s / Div (progressive in 1-2-5)11. Trigger mode: With automatic, regular and single shot, easy to capture instantaneous waveform12. Trigger on rising or falling edge13. Trigger level position is adjustable, with indication14. Observe waveform before trigger (negative delay)15. Freeze waveform display at any time (HOLD function)16. Signal source: Comes with 1KHz /3.3V square wave test17. The parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, and effective value.18. Save / recall waveform, the waveform does not disappear after shutdown19. Packing list:20. 15001K (SMD components are soldered)Specification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 20cm * 13cm * 5cm / 7.87inch * 5.12inch * 1.97inch Qty per Carton 40 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 27cm * 42cm / 20.47inch * 10.63inch * 16.54inch Loading Container 20GP: 452 cartons * 40 pcs = 18080 pcs40HQ: 1049 cartons * 40 pcs = 41960 pcs

Leer Más Menos

Features1. Adopt PL2303GS new version device 2. Support windows XP/7/8/10/11/... 3. 3x VCCIO power mode via jumper setting: - VCCIO - 5V: 5V output - VCCIO - 3.3V: 3.3V output 4. Open the jumper: powered from target board (1.8V/2.5V/3.3V/5V) 5. 3x LED indicators: TXD, RXD, PWRPackage List1. PL2303 USB UART Board (type A) V2 x1 2. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 500 pcs = 283000 pcs40HQ: 1314 cartons * 500 pcs = 657000 pcs

Leer Más Menos

1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Castellated module allows soldering direct to carrier boards 6. USB 1.1 with device and host support 7. Low-power sleep and dormant modes 8. Drag-and-drop programming using mass storage over USB 9. 29 x multi-function GPIO pins (20 x via edge pinout, others via solder points) 10. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels 11. Accurate clock and timer on-chip 12. Temperature sensor 13. Accelerated floating-point libraries on-chip 14. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs

Leer Más Menos

1. Image sensor:for SONY CMOS 1/2.3 4K sensor2. Video output: 4K/2K/1080P Full HD (for HDMI output); 1080P (USB output)3. Sensor size: 1/2.3 inch4. Pixel size: 1.55 × 1.55μm5. Photo resolution: 7440 × 55806. Photo format: JPEG7. Lens type: standard C/CS interface8. Frame rate: 3840×2160, 30FPS(4K); 1080P 120FPS; 720P 240FPS9. Video output interface: for HDMI/USB10. Storage: TF memory card, upper limit 128G11. PC support: support Windows XP/7/8/10 system, PC software with measurement function (gift)12. Image zoom: 7 times zoom in and zoom out digital zoom13. Image measurement: support software measurement14. Language settings: Chinese, English, Japanese, French, German, Russian, Italian, Korean, Turkish15. Shell size: 63×62×58mmSpecification: Package Weight One Package Weight 0.60kgs / 1.32lb One Package Size 16cm * 12cm * 10cm / 6.3inch * 4.72inch * 3.94inch Qty per Carton 36 Carton Weight 21.46kgs / 47.30lb Carton Size 53cm * 39cm * 33cm / 20.87inch * 15.35inch * 12.99inch Loading Container 20GP: 390 cartons * 36 pcs = 14040 pcs40HQ: 907 cartons * 36 pcs = 32652 pcs

Leer Más Menos

Specifications1. Product: MG90S Servo2. Torque: 2.0kg/cm(4.8V), 2.8kg/cm(6V)3. Speed: 0.11s/60°(4.8V), 0.09s/60°(6V)4. Rotate angle: 180°5. Operating voltage: 4.8 ~ 6V6. Gear: metal7. Dead band: 5us8. Weight: 12.2g9. Dimension: 22.8mm × 12.2mm × 28.5mmSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 7cm * 4cm * 6cm / 2.76inch * 1.57inch * 2.36inch Qty per Carton 480 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 36cm / 22.05inch * 15.75inch * 14.17inch Loading Container 20GP: 330 cartons * 480 pcs = 158400 pcs40HQ: 767 cartons * 480 pcs = 368160 pcs

Leer Más Menos

This is 433Mhz RF transmitter with receiver kit for Arduino ARM MCU wirelessApplication environmentRemote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.SpecificationReceiver module: 1. Product Model: XD-RF-5V2. Operating voltage: DC5V3. Quiescent Current: 4MA4. Receiving frequency: 433.92MHZ5. Receiver sensitivity: -105DB6. Size: 30x14x7mmTransmitter:Technical parameters1. Product Model: XD-FST4. Launch distance: 20-200 meters (different voltage, different results)3. Operating voltage: 3.5-12V4. Dimensions: 19 * 19mm8. Operating mode: AM6. Transfer rate: 4KB / S7. Transmitting power: 10mW8. Transmitting frequency: 433M9. Pinout from left to right: (DATA; VCC; GND)Package included1. 1 x Receiver module2. 1 x TransmitterSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 4cm * 1cm / 1.97inch * 1.57inch * 0.39inch Qty per Carton 4800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4800 pcs = 1329600 pcs40HQ: 644 cartons * 4800 pcs = 3091200 pcs

Leer Más Menos