Resultados de la búsqueda de "continuity tester"

Specification:1. Display: 2.7 inch LCD2. Cable reach: 650 mm (25.6 inches)3. Storage temperature: -20 celsius to +70 celsius (-4 degrees Fahrenheit to 158 degrees Fahrenheit)4. Operating temperature: -20 degrees Celsius to +60 degrees Celsius (-4 degrees Fahrenheit to 140 degrees Fahrenheit)5. Dimensions (LxWxH): 150x90x35mm (5.9x3.54x1.38 inches)6. Weight: 325g (0.72 lbs)Precautions:1. Use the tester as instructed, taking into account the operating conditions and the work to be performed. Using this tester for operation other than intended may result in a hazardous situation2. Before testing, please make sure that the battery terminals are really clean, as grease and dust can cause false test results.3. Wear safety goggles when working near batteries.4. Check that the insulation of the battery clip is normal (not damaged, exposed, or disconnected) to prevent electric shock.5. Test in a well-ventilated area. Explosive and toxic gases may be generated during testing.6. Keep hair, hands, and clothing, as well as tester leads and wires, away from moving blades and belts.7. The tester is not a toy. Keep it out of the reach of children.8. Do not place the tester near the engine or exhaust pipe to avoid being damaged by high temperature when the car engine is running.9. Do not smoke, generate sparks or strike matches near the battery during the test10. Do not remove the battery clip while testing11. Do not place the tester in a highly humid, dusty environment.12. Do not disassemble the tester as damage may result.Specification: General Certificate ROHS, EMC Package Weight One Package Weight 0.46kgs / 1.02lb One Package Size 21cm * 14cm * 6cm / 8.27inch * 5.51inch * 2.36inch Qty per Carton 30 Carton Weight 13.70kgs / 30.20lb Carton Size 45cm * 44cm * 30cm / 17.72inch * 17.32inch * 11.81inch Loading Container 20GP: 448 cartons * 30 pcs = 13440 pcs40HQ: 1042 cartons * 30 pcs = 31260 pcs

Leer Más Menos

1. Easy to check ATX, BTX or ITX power supply 2. Voltage source: 20 / 24 Pin (ATX-connector) 3. Voltage test: +12V, -12V, +5V, -5V, +3.3V, 5V stand by (SB), 12V power Good (PG) 4. Connectors: Floppy, HDD, CDROM, SATA, 4 Pin (P4), 8 Pin (Dual-CPU), 6 Pin (PCI-Express) 5. Plug power supply 24 Pin and P4, P6 or P8 into the corresponding jacks of the power supply tester 6. Turn on the tester, you will hear "DuDu" sound, if there are no flashing numbers then the power supply functions normally 7. If a certain voltage signal is not detected or voltage is out of normal range, the buzzer will make long "DuDu" sound and corresponding voltage or PG value is flashing, then the power supply is failedSpecification: General Material Plastic, Metal Size 12*6.5*1.9cm Weight 75g Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 21.9cm * 10.3cm * 2cm / 8.62inch * 4.06inch * 0.79inch Qty per Carton 90 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 33cm * 32cm / 18.11inch * 12.99inch * 12.6inch Loading Container 20GP: 548 cartons * 90 pcs = 49320 pcs40HQ: 1274 cartons * 90 pcs = 114660 pcs

Leer Más Menos

1. Operation mode: TA803A: manual range; TA803B/TA803C: manual/automatic range2. DC voltage: TA803A/TA803B: 0.1mV-1000V; TA803C: 0.01mV-1000V3. AC voltage: 0.01mV-750V4. Current: 0.01uA-10A5. Capacitance: TA803A: 1nF-20000uF; TA803B: 1nF-6000uF; TA803C: 1nF-2000uF6. Resistance: TA803A: 0.1 ohm-20 megohm; TA803B: 0.1 ohm-60 megohm; TA803C: 0.01 ohm-20 megohm7. Frequency: TA803A: 40Hz-1000Hz; TA803B: 10Hz-100kHz; TA803C: 10Hz-20MHz8. Display: TA803A: 1999 (31/2) bits; TA803B: 5999 (3 5/6) bits; TA803C: 19999 (4 1/2) bits9. Sampling frequency: about 3 times / second10. Power supply: 9V battery (not included)11. Automatic shutdown: about 15min12. General features: intelligent anti-burn-in, low voltage display, rms value, backlight display, on/off alarm, value lock13. Functions:- TA803A: analog bar display, average value measurement, diode measurement, triode measurement, NCV function- TA803B: diode measurement, maximum / small value measurement, temperature measurement, duty cycle / relative value- TA803C: analog bar display, diode measurement, temperature measurement, duty cycle/relative value14. Size: about 18.4 x 8.8 x 4.6cm15. Weight: about 320gFeatures:1. Soft rubber protective case + meter pen clip design, leather case can be drop-proof, dustproof, shockproof, meter pen can be stored for protection, to avoid accidental injury2. Back thickened bracket design, more convenient placement3. Flashlight lighting function, in the dark environment can also be easily measured4. Large screen backlight display, easy to read in the dark environment5. NCV voltage sensing function, according to the detected voltage strength, display and different frequency of the beeping alarm sound (only TA803A has)Packing list:- Host x 1- Meter pen x 2- Thermocouple x 2- Fuse x 2- Instruction manual x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 21cm * 14cm * 7cm / 8.27inch * 5.51inch * 2.76inch Qty per Carton 30 Carton Weight 16.50kgs / 36.38lb Carton Size 44cm * 34cm * 43cm / 17.32inch * 13.39inch * 16.93inch Loading Container 20GP: 414 cartons * 30 pcs = 12420 pcs40HQ: 962 cartons * 30 pcs = 28860 pcs

Leer Más Menos

1. K-890 es un instrumento digital de alta precisión de 3 5/6 con funciones de rendimiento estable, alimentado por batería, alta confiabilidad y alta precisión. 2. El instrumento tiene una pantalla de gran tamaño de 21 mm para mantener una lectura clara y retener el valor pico. 3. También se puede utilizar para medir algunos parámetros como voltaje CC, voltaje CA, corriente CC, corriente CA, resistencias, condensadores, diodos, temperatura, encendido y apagado, prueba de inducción de campo eléctrico y frecuencia. 4. Toda la máquina toma la conversión A/D integral doble como núcleo, este es un instrumento de capacidad superior y una herramienta ideal para el hogar para laboratorios, fábricas y entusiastas de la radio. 5. Pantalla digital con rango de 6000 bits 6. 15 segundos de tiempo de luz de fondo 7. Apagado automático 8. Nota: batería (no incluida) Especificación: Peso del paquete Peso de un paquete 0,27 kg/0,60 lb Un tamaño de paquete 21 cm x 15 cm x 5 cm (8,27 pulgadas x 5,91 pulgadas x 1,97 pulgadas) Cantidad por caja 24 Peso de la caja 7,00 kg/15,43 lb Tamaño de la caja 44 cm x 32 cm x 32 cm (17,32 pulgadas x 12,6 pulgadas x 12,6 pulgadas) Contenedor de carga 20GP: 591 cajas * 24 piezas = 14184 piezas 40HQ: 1373 cajas * 24 piezas = 32952 piezas

Leer Más Menos

After you repair the Wheel Steering Motor, our product can be directly tested on the workbench to see if it works properly without the need to reinstall it in the car for repeated testing. Function: 1. Simulate Torque Sensor to Activate CAN; 2. Can Flash Firmware, Update Software; 3. Also can test the Torque Sensor; 4. When you connect to the diagnostic scanner, you can read the data about Torque Sensor. Operation: Switch: Select the model you want to test. ("FOCUS" "Linc""V40") "<" ">": Drive or Rotate the Wheel Steering Motor. Power supply:12V 10A, we do not send with this cable. Screen:Show work voltage or current of the tester. Support to connect to other diagnostic scanner to check the real-time data for Wheel Steering Motor. Support model: For FORD C-MAX II 2010 - For FORD FOCUS III 2011 - 2017 For FORD TRANSIT CONNECT Wagon/Man 2013 - For FORD USA EXPLORER 2011 - For FORD USA FLEXoff-road closed 2012- For FORD USA TAURUS 2012 - For LINCOLN MKC 2014 - For LINCOLN MKS 2012 - For VOLVO V40 2011 - 2018 Note: Only suit for Iron Shell Steering Wheel Motor. Note: 1. The flashing firmware must be done using original manufacturer software. 2. Online flashing firmware using decoders is not supported. 3. Additionally, during the steering testing process, it is advisable to avoid extending to the maximum limit to reduce the risk of losing EPS computer board data. Package List: 1. Tester x 1 2. Adapter Cable x 1 3. 12V Power Adapter x 1Specification: Package Weight One Package Weight 3.11kgs / 6.85lb One Package Size 46cm * 25cm * 35cm / 18.11inch * 9.84inch * 13.78inch Qty per Carton 2 Carton Weight 7.20kgs / 15.87lb Carton Size 52cm * 47cm * 35cm / 20.47inch * 18.5inch * 13.78inch Loading Container 20GP: 311 cartons * 2 pcs = 622 pcs40HQ: 723 cartons * 2 pcs = 1446 pcs

Leer Más Menos

FeaturesThe automotive electrical system activator is suitable for 6-40V power circuit diagnosis. It has a compact design and powerful functions. It has reverse connection and overload protection functions. The tool probe can be used to test the conductivity of the circuit and detect voltage, positive and negative pole detection, activation components and other functions. It can quickly detect short circuits, broken wires or poor contact of vehicle electrical system components, helping users to understand the vehicle faster and more accurately. It is an efficient and advanced testing tool that can greatly improve the users work efficiency. Main functions: Voltage detection, resistance detection, diode detection, positive and negative pole detection, component activation, continuity test, grounding test, tracking and locating short circuits Product selling points: 1. The product can choose 2 No. 7 batteries, without double-headed clips for power supply (batteries are not included). 2. Silicone button pot pieces (make the product operation more handy). 3. 4 meters of detection line. 4. The probe input voltage is up to 107V. (Customizable up to 150V) 5. Intelligent recognition of voltage/resistance (1 ohm-100K ohm data).Specifications1. Diagnostic Method: Wired 2. Screen type: LCD 3. Wire length: 4 meters 4. Working voltage: 5V-40V 5. Power Supply Mode: Mode 1: 2pcs AAA Batteries(goods shipped without batteries,so you should buy the batteries by yourself) Mode 2: 12V or 24V power supply 6. Working currency: 40mA 7. Activation current: 0-8ASpecification: Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 26cm * 10cm * 6cm / 10.24inch * 3.94inch * 2.36inch Qty per Carton 20 Carton Weight 7.50kgs / 16.53lb Carton Size 42cm * 32cm * 28cm / 16.54inch * 12.6inch * 11.02inch Loading Container 20GP: 708 cartons * 20 pcs = 14160 pcs40HQ: 1645 cartons * 20 pcs = 32900 pcs

Leer Más Menos

1. Material: ABS/stainless steel2. Count: 40003. NCV sensitivity: when the probe tip is close to the object being tested, a green backlight flashes when the induced electric field is weak, and a red backlight flashes when the induced electric field is strong.4. Circuit break location: select NCV mode and follow the circuit. A strong alarm signal indicates a good circuit, while a weak signal indicates a break.5. Suitable for various automotive circuit tests; AUTO automatically identifies AC voltage, resistance, and continuity tests.6. P-Phase sequence detection: switch to Phase mode and follow the steps below to touch the A, B, and C points of the three-phase power supply to detect the phase sequence.7. LCD backlit display: the screen values ??are clearly visible in dark environments.8. Live mode: when the probe tip touches the circuit, the live wire displays "H" with a beep, and the neutral wire displays "Live" with no beep.9. High-resilience spring cord, made of stretchable and tensile-resistant material, will not deform even after repeated stretching, fully elastic and shrinks back to its original shape without becoming tangled, featuring tensile strength, durability, and cold resistance.10. A3016: equipped with a Type-C charging cable, red light during charging, green light when fully charged, built-in 500mA high-capacity rechargeable lithium battery.11. A3015: uses two AAA batteries (not included).12. After 15 minutes of inactivity after powering on, the product will automatically enter sleep mode and shut down, extending battery life and saving energy.13. Dimensions: 17.7x2.8x2.6cmSpecification: Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 20cm * 9cm * 5cm / 7.87inch * 3.54inch * 1.97inch Qty per Carton 48 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 48 pcs = 25056 pcs40HQ: 1212 cartons * 48 pcs = 58176 pcs

Leer Más Menos

1. Loud 85db alarm 2. Permanent carbon monoxide sensor 3. The red LED will flash while in alarm mode 4. Standby: Green Led flashes once every 30 seconds 5. Low-bat Indicator: Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD 6. 3 digits LCD display 7. Power supply: 3 x AA batteries (not included) 8.Sensitivity & time: 50ppm, alarms within 60~90 minutes; 100ppm, alarms within 10~40 minutes; 3000ppm, alarms within 3 minutes 9. Standby current: Less than 50uA 10. Alarm current: Less than 50mASpecification: General Material ABS Power Supply DC 4.5V Alarming Current <50mA Standby Current <50uA Size Diameter: 10cm Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 13cm * 13cm * 7cm / 5.12inch * 5.12inch * 2.76inch Qty per Carton 50 Carton Weight 7.90kgs / 17.42lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 50 pcs = 31000 pcs40HQ: 1439 cartons * 50 pcs = 71950 pcs

Leer Más Menos

1. Size: 20x10x3.5cm2. Weight: 780g3. Voltage: DC 12V4. Screen display: 2.8 inches color LCD screen5. Combo: OBD2 Engine Scan, OBD1 Engine Scan, O2 Sensor Test, EVAP System Monitor, Battery Voltage Test, Troubleshooter Code Prompt, MIL Off, Live Data Streaming, Boot Test, Charge Test, Voltage Waveform, Oil Reset6. Application: 12V OBD2 & 1 car, light truck, sedan, SUV7. Main functions: read and clear fault codes, read real-time sensor data, display data stream, find fault codes, prompt fault codes8. Supported languages: English, French, German, Spanish, Russian, Italian, Polish9. Free benefits: support PC free upgrade system and print data10. Supported protocols: ISO 9141 / KWP2000 / SAE J1850 / CAN / J1850 VPW / J1850 PWMFeatures:1. KW890 OBD2 car diagnostic scanner is suitable for all OBD II compliant 1996 and newer 12V gasoline and diesel.2. This product can recognize the reason of your CHECK ENGINE and can repair it automatically. It also helps you easily pass annual emissions tests and smog inspections.3. This product covers the complete OBDII/EOBD diagnostic function of the engine system. The O2 sensor test, EVAP system test and board monitoring test give you full control over the operating status of your vehicle, while the graphical and numerical live data stream displays will help you pinpoint erroneous sensor readings.4. KW890 is also a digital battery tester for 12V lead-acid car, SUV, light truck batteries.5. The KW890 battery tester can test all automobile starting lead-acid batteries, including ordinary lead-acid batteries, AGM flat batteries, AGM spiral batteries, gel batteries, lithium batteries, etc., using the most advanced conductivity testing technology in the world, easy, fast and accurate Accurately measure the actual cold cranking current capability of the vehicles starting battery, the state of battery health itself, and common faults of the vehicles starting system and charging system, which can help maintenance personnel quickly and accurately find the problem, so as to achieve rapid vehicle repair.6. Special Function - Oil Reset: This function allows you to reset the engine oil life system, and calculates the optimal oil life replacement interval based on the vehicles driving conditions and climate.7. The engine oil reset function can be performed under the following conditions:- If the service light is on, you must service the car. After the maintenance is completed, it is necessary to reset the driving mileage or driving time, so that the maintenance light goes out, and the system starts a new maintenance cycle.- After an oil change or an appliance that monitors oil life, you will need to reset the service light.Specification: General Certificate ROHS, FCC Package Weight One Package Weight 0.91kgs / 2.00lb One Package Size 25.5cm * 18.5cm * 7cm / 10.04inch * 7.28inch * 2.76inch Qty per Carton 25 Carton Weight 24.00kgs / 52.91lb Carton Size 56cm * 37cm * 46cm / 22.05inch * 14.57inch * 18.11inch Loading Container 20GP: 279 cartons * 25 pcs = 6975 pcs40HQ: 649 cartons * 25 pcs = 16225 pcs

Leer Más Menos

1. DC voltage measurement range: 0V~620V (DC mode), 0.5V~620V (automatic mode) 0.001V, +/-(0.8%+3)2. AC voltage measurement range: 0V~620V (AC mode), 1.0V~620V (automatic mode), 0.001V, +/-(1.2%+5)3. Resistance: 1Ω-10.00Mohm, 0.1ohm, +/-(1.2%+3)4. Capacitance: 0.5uF-1000uF (+/-(3.5%+8), 1000u-6000uF, +/-(4.5%+10), 0.1μF,5. Frequency: 10HZ~1000Hz, 1Hz, +/-(2.0%+10)6. Diode: measuring diode within 1.0V7. Maximum display value: 99998. Automatic shutdown: 5 minutes9. Battery: Li-ion battery 800mAhSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 18cm * 10cm * 5cm / 7.09inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 26.00kgs / 57.32lb Carton Size 52cm * 42cm * 37cm / 20.47inch * 16.54inch * 14.57inch Loading Container 20GP: 330 cartons * 80 pcs = 26400 pcs40HQ: 766 cartons * 80 pcs = 61280 pcs

Leer Más Menos

1. Material: ABS material + hand-feel paint spray2. Test method: automatic identification3. Power supply current: 5V/2A4. Test type: 12V/24V relay5. Power supply method: 3 No. 5 batteries (not included)/Type-C power supply6. Intelligent shutdown, power saving, protection and extension of battery life7. Note: 1 minute without operation, LED light goes out, the device automatically shuts down and enters sleep, no power consumption8. Supports 10 types of relay tests with 5 different pins, whether the relay is normally open or normally closed, it can be tested9. Automatically identify 12V/24V, no need to select, just insert and test, easily detect relay faults10. Can be powered by three No. 5 batteries, no need to use battery clamps to connect to the vehicle battery, test at any time (not included)11. During the test, sound and light synchronous prompts (two-color LED indicator light green, red + buzzer)12. Dimensions: 152x75x38mmSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 17cm * 9cm * 6cm / 6.69inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 10.60kgs / 23.37lb Carton Size 41cm * 31cm * 31cm / 16.14inch * 12.2inch * 12.2inch Loading Container 20GP: 676 cartons * 50 pcs = 33800 pcs40HQ: 1571 cartons * 50 pcs = 78550 pcs

Leer Más Menos

1. Safety level: CAT.III 600V2. Measurement function: capacitance, resistance, AC voltage, DC voltage3. Other functions: automatic range, on-off buzzer test, diode test, data retention, automatic shutdown4. DC voltage range: 4V/40V/400V/600V5. AC voltage range: 4V/40V/400V/600V6. Capacitance range: 4nF/40nF/400nF/4uF/40uF/400uF/4mF7. Maximum display: 4000 counts8. Battery type: 2 x AAA batteries (not included)9. Size: 16.5x9.3x5.0cm10. Net weight: 239gSpecification: General Certificate CE, FCC, EMC Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 16.5cm * 9.5cm * 5cm / 6.5inch * 3.74inch * 1.97inch Qty per Carton 50 Carton Weight 15.20kgs / 33.51lb Carton Size 40cm * 35cm * 27cm / 15.75inch * 13.78inch * 10.63inch Loading Container 20GP: 705 cartons * 50 pcs = 35250 pcs40HQ: 1637 cartons * 50 pcs = 81850 pcs

Leer Más Menos