Resultados de la búsqueda de "usb antenna"
-
WAVLINK WAVLINK WN675X3-C WiFi 6E Pcie WiFi Network Card Adapter Triple Band AX210 AX5400, WN675X3-C
1.Advanced WiFi 6E Technology:Supports the latest 802.11ax standard with OFDMA, MU-MIMO, 1024QAM, and Target Wake Time (TWT) for high-speed data rates even in dense environments.2.Tri-Band Connectivity:Offers speeds up to 2400Mbps on 2.4GHz, 5GHz, and 6GHz bands, providing optimal performance for gaming, streaming, and VR experiences.3.Enhanced Bluetooth-Compatible 5.3:Features improved wireless data connection with 2x faster transmission speed and 4x increased range for seamless device connectivity.4.Powerful Signal Reception:Dual external 5dBi antennas ensure strong signal reception and transmission, significantly expanding network coverage.5.Low Latency Performance:Advanced OFDMA technology reduces latency by up to seventy-five percent, eliminating buffering and delays for unparalleled speed and responsiveness.Specifications:1.Model: WN675X3-C2.Chipset: Intel AX2103.WiFi Standard: IEEE 802.11a/b/g/n/ac/ax4.Frequency Bands: 2.4GHz, 5GHz, 6GHz5.Maximum Speed: 2.4GHz: 574Mbps, 5GHz: 2400Mbps, 6GHz: 2400Mbps6.Technologies: MU-MIMO, OFDMA, BSS Coloring, 1024QAM, Target Wake Time (TWT)7.Bluetooth-Compatible Version: 5.38.Interface: Compatible with PCIe X1/X4/X8/X169.Security: WPA2/WPA3, WPA2-PSK encryption10.OS Compatibility: Windows 11/10 (64-bit), LinuxSpecification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 22.5cm * 14cm * 2.3cm / 8.86inch * 5.51inch * 0.91inch Qty per Carton 256 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 88cm * 23cm / 35.43inch * 34.65inch * 9.06inch Loading Container 20GP: 146 cartons * 256 pcs = 37376 pcs40HQ: 339 cartons * 256 pcs = 86784 pcs
£27.99
-
1200Mbps 5G / 2.4G Dual Band PCIe Wireless Network Card
1.Upgrade your WiFi card to 1200Mbps Wi-Fi speeds. Make desktop get 867Mbps wireless speed in 5GHz or 300Mbps in 2.4GHz, perfect for 4K video online, online gaming, high-quality music with this pci-express adapter.2.Dual-band Wifi network card has stronger anti-interference ability, more stable Wifi wireless signal, and faster transmission speed. Equipped 2X5dBi detachable dual band external antenna with onboard power amplifier make sure the Wi-Fi receive or transmit in long range. Users will get a super stable and stronger Wi-Fi signal than before.3.Local wired network through the controller provides the AP to share the same signal, loaded into the wireless connection, has a virtual function of the AP wireless card as a wifi access point ,. Another machine, the cordless / mobile phone can connect to the Internet.4.Provides broad compatibility, compatible with any standard PCI Express x1, x2, x8, or x16 slot. Compared to standard PCI network cards, it offers higher bandwidth, reliability, and more. Equipped with low profile and full height stand inside usable on slim and standard size PCs.5.System Requirement: Supports Windows 10 / 8.1 / 8/7. Compliant with IEEE802.11a / b / g / n / ac enables interoperability between multiple Wi-Fi networks. It complies with the security protocol WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP / AES).Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 17cm * 8cm * 2cm / 6.69inch * 3.15inch * 0.79inch Qty per Carton 336 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 55cm * 18cm / 35.43inch * 21.65inch * 7.09inch Loading Container 20GP: 299 cartons * 336 pcs = 100464 pcs40HQ: 694 cartons * 336 pcs = 233184 pcs
£12.99
-
QX36 1080P 3.0MP 3.6mm Lens IP65 Waterproof PTZ 360 Degree Rotating WIFI Camera, Support Day and Night Full Color & Two-way Voice Intercom & Motion Humanoid Detection & Video Playback & 128GB TF Card, AU Plug, QX36
Features: 1. Support 1920x1080P resolution, watch high-definition picture 2. Equipped with dual-filter Ir-cut, automatically switch night vision at night, and can see a distance of 10 meters 3. Support mobile humanoid detection, the screen will capture humanoid objects and follow the object to rotate; if there is an object moving, an alarm will be sent 4. Supports remote real-time viewing of the screen on the mobile phone; you can view the video stored in the memory card for playback and watch; it can perform two-way voice on the mobile phone and the other party 5. Video encoding is H.264/H.265, the playback and viewing video occupies smaller internal storage, and the picture is more high-definition 6. A server that can support the storage of videos in the cloud to avoid loss of local storage 7. Support 128GB TF card, the speed needs Class10 (TF card is not included) 8. Able to realize the mirror image flip up and down 9. Support one-key reset 10. Support multiple mobile phones to watch at the same time, support to watch on a computer, and be able to share the camera with family and friends around you, and watch together Product specifications: 1. Material: ABS 2. APP: carecam 3. Operating system: IOS/Android 4. Prompt language: English 5. APP language: follow the phone 6. Processor: CM8630 7. Waterproof rating: IP65 8. Built-in lens: 3.6mm 9. Lighting configuration: 4 infrared lights, 4 white lights 10. Focusing method: manual 11. Aperture: fixed 3.6mm 12. Viewing angle: 360 degrees 13. Moving head range: 350 degrees left and right, 90 degrees up and down 14. System interface: USB interface, TF interface 15. Power supply: DC 12V/2A, 24W 16. Working temperature: 0-40 degrees Celsius 17. Recording method: manual recording, alarm recording 18. Video frame rate: 1-30 frames 19. Recording time: 5 minutes by default 20. Wireless network: WIFI (IEE802.11b/g/n) 21. Network frequency range: 2.4GHZ-2.4835GHZ 22. P2P WIFI connection: support 23. AP hotspot connection: support 24. Wired network: not supported 25. 4G/5G network: not supported 26. Network protocol: HTTP, FTP, TCP/IP, UDP, SMTP, DHCP, PPPOE, DDNS, UPNP 27. Firmware upgrade: remote upgrade via network Packing list: Camera x 1 Power plug x 1 Manual x 1 Bracket x 1 Screw pack x 1 Antenna x 1Specification: General Model QX36 Performance Motion detection, Night Vision, Image Flip,, Two-way voice intercom, Alarm Function Memory up to 128GB (not included) Function PTZ Power Plug US Plug Network Network Interface RJ45 10/100MB Ethernet interface Wireless WiFi 802.11 b/g/n Protocol DDNS, UDP, SMTP, UPNP, DHCP, PPPOE, FTP, HTTP, TCP/IP, ONVIF System / Hardware Operating System IOS/Android Pixels 3.0MP Lens 3.6mm Pan/Tilt-Horizontal Angle 350 degree Pan/Tilt-Vertical Angle 90 degree Minimum Illumination Color: 0.1Lux/F1.2 Media Format Video Compression Format H.264, H.265 Audio Compression Format G.726, G.711 Resolution 2304*1296 Night Vision Infrared Distance 10m Configuration 4 infrared LEDs Physical Environment Environment Outdoor Ingress Protection IP65 Operate Temperature 0 to 40 Degree Celsius Dimensions Size 11x11x18cm Weight 490g Package Include Package Contents 1 x Camera 1 x Power Adapter (US, UK, EU, AU Optional) 1 x User Manual 1 x Screws Set 1 x Holder Package Weight One Package Weight 0.78kgs / 1.72lb One Package Size 21cm * 21cm * 12cm / 8.27inch * 8.27inch * 4.72inch Qty per Carton 16 Carton Weight 13.30kgs / 29.32lb Carton Size 44cm * 44cm * 50cm / 17.32inch * 17.32inch * 19.69inch Loading Container 20GP: 275 cartons * 16 pcs = 4400 pcs40HQ: 639 cartons * 16 pcs = 10224 pcs
£25.99
-
Receptor Bluetooth 5.1 M9 Pro, lanzador de radio FM, adaptador de audio NFC 4 en 1, M9 Pro
1. Versión de Bluetooth: Bluetooth V5.1 2. Protocolo compatible: A2DP/AVRCP/HSP/OPP/GATT/SM 3. Banda operativa: 2,402 GHz - 2,480 GHz 4. Nivel de potencia: Clase 2 (Clase II) 5. Sensibilidad: -85dBm 6. Relación señal/ruido: 90 dB y superior 7. Tipo de interfaz: - Entrada: 3,5 mm AUX + RCA + FM + USB + interfaz TF + 6,5 MIC - Salida: 3,5 mm AUX+RCA 8. Parámetros de radio: FM 87,5-108 MHz 9. Formatos compatibles: MP3/WAV/WMA/APE/FLAC/G729/M4A/ALAC/AMR/DTS/MIDI/G726/MTY 10. Tamaño de la pantalla: aproximadamente 36 x 8 mm 11. Capacidad de la batería: 3,7 V/1200 mAh 12. Corriente de carga: aprox. 1 A 13. Tiempo de carga: aproximadamente 1,5 h. 14. Tiempo de vida: aproximadamente 8 horas. 15. Distancia de Bluetooth: dentro de 30 m (en un lugar abierto) 16. Interfaz de carga: Tipo-C/USB-C 5V/1A 17. Dispositivos compatibles: teléfonos móviles con sistema Android, IOS y PAD, altavoces activos, amplificadores y altavoces o auriculares Bluetooth compatibles con el protocolo A2DP/conectados para su uso. 18. Lista de embalaje: adaptador x1, control remoto (incluye una pila de botón) x1, antena de radio FM x1, cable de audio de 3,5 mm x1, cable RCA Lotus x1, cable de carga x1, manual x1 19. Tamaño: aproximadamente 9,8 x 6,7 x 2,35 cm 20. Peso: aproximadamente 143 g Características: 1. Utilizando el diseño de chip Bluetooth 5.1, mayor compatibilidad y estabilidad. 2. Recepción Bluetooth (RX), transmisión Bluetooth (TX) dos en uno 3. Equipado con pantalla digital LED de alta definición, estado de funcionamiento y modo Bluetooth claramente visibles. 4. Chip de decodificación DSP incorporado, efecto de graves intensos, el dispositivo admite el ajuste del botón de agudos/graves. 5. Con función NFC, el teléfono celular detecta un toque que está conectado. 6. Luz indicadora controlable, suave y no cegadora, el brillo de la luz sigue el volumen del brillo/oscurecimiento correspondiente. 7. Admite reproducción y lanzamiento de disco U/tarjeta TF, compatible con formatos MP3/WMA/SBC/WAV/DTS/A52/FLAC/AAC/AIF/AMR/APE 8. Radio FM incorporada, una tecla para buscar y almacenar automáticamente la estación, la frecuencia se puede ajustar de 87,5 ~ 108 9. Admite control remoto externo en modo privado rojo de 5 a 8 m, modo/señal/volumen/subir y bajar canción/mezcla/micrófono y otras operaciones 10. Micrófono de alta definición incorporado de 6,5 mm, compatible con acceso al micrófono para cantar, diseño antisilbido incorporado 11. Conexión sencilla, sin necesidad de conducir ni descargar la aplicación. Especificación: Peso del paquete Peso de un paquete 0,20 kg/0,45 lb Un tamaño de paquete 15 cm x 12 cm x 4 cm (5,91 pulgadas x 4,72 pulgadas x 1,57 pulgadas) Cantidad por caja 146 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 146 uds. = 25842 uds. 40HQ: 412 cajas * 146 piezas = 60152 piezas
£15.99
-
Usdr Usdx + V2 Plus 8 Band SDR Full Mode HF SSB QRP High Frequency Transceiver, Spec: EU Plug, EU Plug, US Plug
Function1. Remove the headphones and the power button/microphone jack to the front panel, convenient to connect the headset and the power button 2. Move the keys to the bottom of the LCD screen for a larger touch area and a more comfortable keystroke experience 3. Upgrade the built-in speakers to double the sound 4. PCB to reserve a variety of upgrades required pad, out of the box, can be used as a DIY upgrade learning template 5. Change the QRP CW frequency quickly 6. Support CW side volume adjustment 7. Support CW side tones 8. This is a shortwave QRP SSB/CW transceiver. Ultra-small size for portable outdoor use, (no battery) 1602n LCD screen, built-in speakers, support to connect computers using FT8, JS8, FT4 and other mode software control digital, support CW automatic decoding Features: 1. 8 tracks covering 80M/60m/40m/30M/20m/17M/15m/10m 2. PCB layout design in line with high frequency circuit design principles to ensure excellent performance 3. Both built-in Battery and external 13.8v power supply, can achieve 8-stop 3-5w power, and reserve the necessary sot-223 and To-220 pack pad for upgrading 4. High launch efficiency 7. KDS high precision tcxo brand, frequency accuracy above 1ppm, frequency stability above 0.5ppm 8. Ultra-small size: 88x39x124mm (without bulge) 9. Rich interfaces (cat, ptt out, mic/key, k-head mic) 10. All LPF components use 100v c0g/np0 capacitors 11. Using op-amp chips are lower than those of lm4562 noise 12. A built-in speaker with a cavity 13. BNC antenna interfaceExplanation1. Support full mode: usb, lsb, cw, am, fm (ssb mode reception effect is good, but the transfer effect is poor. AM and FM mode is free, the effect is not good) 2. Filter DSP filter: 4000, 2500,1700,500,200,100,50 Hz passband 3. Function DSP function: automatic gain control (AGC), noise reduction (NR) , XMIT Voice Trigger (Vox), RX attenuator (Att), TX Noise Gate, TX unit control, volume control, DBM/S instrument 4. Sidebar/carrier suppression SSSSB emission: superior to -45dbc, IMD3(dual tone) -33dbc, receiver: superior to -50dbc 5. Support for multi-band support, in the 80m frequency range of continuous adjustable 10m (from 20khz. 99mhz, loss performance) 6. Open source firmware, built using Arduino IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines based on 7. The software vovovox code can be used for fast complete control (qsk and semi-qsk operations) or RX/auxiliary switch TX to be used in digital mode (no cat or PTT interface is required) 8. The PTT/PA output is externally controlled by the all-digital tx-delay stage and the software-based SSB stage transmitter: the phase of sill SI5351 is controlled (by a small frequency change i2c at 800 kbits/s) and the PA amplitude is controlled (by a pwm pa key shaping circuit) 9. Software-based all-digital SDR receiver level (optional): sampling of I/Q (complex) signals from a digital mixer with an orthogonal sampling detector, and mathematically perform a 90-degree phase shift (David Hilbert transform) in the software by adding an Atten sideband 10. Three independent switchable analog pushers (0db, -13 db, -20 db, -33 db, -53 db, -60 db, -73 db) from the front receiver 11. Receiver background noise mds: -135 DBM at 28 mhz (200 hz bw) 12. Receiver receiver front-end selectivity: +/-2 khz scrolling at steep 45 db/decade tuning frequency 13. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db 14. CW decoder, direct/iambic-a/B keying 15. VVFO A/B + RIT and split, and the corresponding relays pass through i2c 16. The CAT supports cat with a filter switch (using the kenwood TS-480 protocol) Package includes: 1. 1 x transceiver 2. 1 x the microphone 3. 1 x charger 4. 4 x machine floor MatsSpecification: Package Weight One Package Weight 0.53kgs / 1.16lb One Package Size 17cm * 12cm * 8cm / 6.69inch * 4.72inch * 3.15inch Qty per Carton 56 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 56 pcs = 9912 pcs40HQ: 412 cartons * 56 pcs = 23072 pcs
£82.99
-
WAVESHARE Waveshare WAVEGO 12-DOF Bionic Dog-Like Robot, Extension Pack, Extension Pack
FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 554g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 200g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x 30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x 4 16. 4 PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.08kgs / 2.37lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 17.00kgs / 37.48lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs
£194.99
-
WAVESHARE Waveshare WAVEGO 12-DOF Bionic Dog-Like Robot, Basic Version, Basic Version
FeaturesThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating. 1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque 2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating task for the host controller and improving the gait solving efficiency 3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight 4. Additional Raspberry Pi can beattached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.SpecificationsGeneral: 1. Product name: WAVEGO high-DOF bionic quadruped robot 2. Stand up: length 218mm, width 116mm, height 152mm 3. Lie down: length 228mm, width 116mm, height 127mm 4. Overall weight: 465g (with batteries) 5. DOF: 12 overall, 3 per single leg Operating system: Demo code: FreeRTOS + Raspberry Pi OS Motion performance: 1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait , jump, self-balancing 2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function 3. Load: 300g Servo info.: 1. Dimensions: 23.2 x12.1 x25.25 mm 2. Weight: 13.0 +/- 1g 3. Operating voltage: 6V 4. Idle speed: 0.1sec/60 degree (100RPM) 5. Stalling torque: 2.3kg.cm (31.99oz.in) 6. Rated load: 0.7kg.cm 7. Rated current: 350mA 8. Control method: Pulse width modification 9. Control system type: Digital comparator Visual function: 1. FreeRTOS demo: Web-based real time video streaming 2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV Processor and memory: 1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz 2. SRAM: 520KB+8MB 3. Flash: 448KB+4MB Others: 1. WiFi standard: 802.11b/g/n 2. Bluetooth standard: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE) 3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.) 4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion) Power supply: 1. Battery type: 18650 Li-ion batteries (NOT included) 2. Supply voltage: 7-8.4V 3. Recharge voltage: 8.4V 4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating 5. Output voltage: provides 5V output for other host controllerPackage List1. WAVEGO body case x 1 2. WAVEGO basic parts x 1 3. Semi-transparent acrylic panel x 1 4. Double-sided sticker x 1 5. WAVEGO base board x 1 6. 2MP camera x 1 7. 2.4G antenna x 1 8. 0.91 inch OLED display x 1 9. Micro thrust bearing x 14 10. Micro ball flange bearing x30 11. USB cable (~1m) x 1 12. Plus screwdriver x 1 13. Cross wrench sleeve x 1 14. IPEX 1 to SMA cable (~17cm) x 1 15. Jumper wire (~20cm) x4 16. 4PIN PH2.0 cable x 1 17. Servo pack x 1 18. 8.4V 2A battery charger x 1 19. Screws and standoffs x 1Specification: Package Weight One Package Weight 1.06kgs / 2.34lb One Package Size 26cm * 22cm * 10cm / 10.24inch * 8.66inch * 3.94inch Qty per Carton 20 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 53cm * 45cm / 20.47inch * 20.87inch * 17.72inch Loading Container 20GP: 215 cartons * 20 pcs = 4300 pcs40HQ: 499 cartons * 20 pcs = 9980 pcs
£178.99