Resultados de la búsqueda de "Cable Monitor Stand"

Features1. This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high speed LTE CAT4 global band connection. By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable 4G high speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. 2. Support dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on 3. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position 10. Onboard audio jack and audio decoder, allows audio operation like making phone call 11. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 2. LTE-TDD: B34, B38, B39, B40, B41 3. 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 4. 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz GNSS: 1. Satellite systems: GPS, Beidou, GLONASS, GALILEO, QZSS 2. Receiver type: - 16-channel - C/A Code 3. Sensitivity: - -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) - Cold starts: -148 dBm 4. Time-To-First-Fix (open air): - Cold starts: Less than 35s - Hot starts: Less than 1s SMS and Audio 1. SMS: - Supported types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature: - Support echo cancellation - Support noise reductionPackage List1. M.2 TO 4G/5G HAT x 1 2. SIM7600G-H-M.2 x 1 3. Antenna 2pcs x 1 4. IPEX adapter cable 2pcs x 1 5. 2*20PIN pin header x 1 6. Passive GPS antenna x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 2pcs x 1 11. Screws pack x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 9.80kgs / 21.61lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs

Leer Más Menos

Features1. Home intelligence webcam: fool fun home intelligence monitoring, remote monitoring, easy to achieve APP video call intercom. 2. Plug and play: After the device is connected to the network, there is no need to apply for a domain name. You do not need to set port mapping. You can completely control the device through the APP. The home smart security starts from the mobile phone control. 3.APP Multi-function: set time zone, image flip (up/down/left/right), timing capture, alarm setting (alarm information push oriented APP account, directed mailbox, device beep, FTP), view wifi information, set defense zone, set storage, set recording information and other functions; 4. Network Adaptation: The device will select the most suitable code stream for transmission according to the current network conditions, and support IE browser and computer to watch, bringing a user experience. 5. Support humanoid tracking, currently supports 3 personal frames, when the screen appears several people at the same time, the device automatically tracks according to the maximum human form. 6. Support OSD overlay and OSD hidden features. 7. Device motion detection alarm mailbox push, support 1 mailbox push, multiple mailboxes to receive. 8. Default H.265 encoding, lower bit rate, clearer image quality, less bandwidth, and smoother image 9. Support Onvif standard protocol, compatible with most network hard disk recorders on the market.Parameter1. Sensor: 1/2.9 inch 2.0 Megapixel progressive can CMOS 2. Focal length: 3.6mm 3. Angle of View: 75.7 degrees 4. P/T function: Pan:355 degrees,Tilt:120 degrees 5. White Balance: auto white balance 6. Compression: H.264/H.265 7. Wireless: support WiFi 802.11b/g/n, 2.4G band ; AP mode 8. Max user qty: 4 9. Client: iPhone, iPad, Android, Windows PC 10. Alarm detection: Humanoid detection and automatic tracking, motion detection , sound detection 11. Alarm action: Alarm recording, alarm capture, Email and FTP send pictures, APP push 12. TF card: support max to 64GB TF card 13. Power supply: DC5V 14. Power Consumption: <6W 15. Size: 8x9x10.5cmSpecification: General Model PVR008 Power Supply DC 5V Performance Motion detection, Night Vision Memory TF Card, up to 64GB (not included) Network Wireless WiFi 802.11 b/g/n, 2.4GHz Protocol DDNS, NTP, SMTP, UPNP, TCP, DHCP, PPPOE, IPv4, FTP, RTSP, IP, HTTP, DNS Online Visitor (Max.) 4 System / Hardware Image Sensor CMOS Sensor Size 1/2.9 inch Progressive Scan Pixels 2.0MP Lens 3.6mm Pan/Tilt-Horizontal Angle 355 degrees Pan/Tilt-Vertical Angle 120 degrees Minimum Illumination Color: 0.1Lux/F1.2 White Balance Auto Media Format Frame Rate (FPS) 25fps Night Vision Infrared Distance 10m Configuration 10 infrared LEDs Physical Environment Operate Temperature -10 to 50 Degree Celsius Working Humidity 10 to 85 percent Package Include Package Contents 1 x Camera 1 x USB Cable 1 x Power Adapter (US, UK, EU, AU Optional) 1 x User Manual 2 x Screws 1 x Reset Needle 2 x Plastic Expansion Package Weight One Package Weight 0.63kgs / 1.39lb One Package Size 20cm * 15cm * 13cm / 7.87inch * 5.91inch * 5.12inch Qty per Carton 16 Carton Weight 10.80kgs / 23.81lb Carton Size 54cm * 32cm * 42cm / 21.26inch * 12.6inch * 16.54inch Loading Container 20GP: 367 cartons * 16 pcs = 5872 pcs40HQ: 852 cartons * 16 pcs = 13632 pcs

Leer Más Menos

Features1. Comes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, supports 5G NSA and SA networking, supports multi-mode multi-band 2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS 3. Operating system support: Windows/Linux/Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series 6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas 10. 2x SIM card slot, dual card single standby, switchable via AT command 11. Onboard audio jack and audio decoder, allows audio operation like making phone call 12. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. Sub-6G (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 2. Sub-6G (NSA): n41, n77, n78, n79 3. LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 4. LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 5. WCDMA: B1, B2, B3, B4, B5, B8 6. GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS Data rate 1. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL) 2. LTE: 1 Gbps (DL) / 200 Mbps (UL) 3. HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) Software functions 1. Operating systems: Windows/Linux/Android 2. Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 3. SMS: Supports MT, MO, CB, Text, PDU 4. Firmware upgrade: Supports firmware upgrade via USB port Applications 1. Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. 2. Application examples: CPE, Smart gateway, Drone, Live streaming, Remote treatment, Intelligent securityPackage List1. M.2 TO 4G/5G HAT x1 2. SIM8202G-M2 x1 3. Antenna 4pcs x1 4. IPEX adapter cable 4pcs x1 5. 2 x 20PIN pin header x1 6. Passive GPS antenna x1 7. Dual plug USB3.0 cable x1 8. USB 3.0 adapter x1 9. USB 2.0 adapter x1 10. SMA protective cap 4pcs x1 11. Screws pack x1Specification: Package Weight One Package Weight 0.34kgs / 0.74lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs

Leer Más Menos

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

1) Úselo para el dispositivo de visualización HDMI de TV, proyector y dispositivo LCD. 2) Este producto es compatible con Windows, Mac OS, iOS, Android para los mejores sistemas operativos. 3) La realización de transmisión Miracast local e internet a televisores y dispositivos de visualización. 4) Admite un teléfono celular, pantalla plana, imagen de PC, música, intercambio de frecuencia de video, excelente frecuencia de video genial para esperar la frecuencia de video en línea, youtube, busque una frecuencia de video de fox. 5) La función especial EZ Cast es el arma secreta que es muy pequeña para sostener y extender, permite que el intercambio no tenga lugar en ningún lado, los juegos de negocios se muestran más convenientes. 6) Admite salida de TV HDMI 1080P y la resolución se puede cambiar. 7) Apoyar la difusión de contenido local en la TV Especificación: 1) Modelo: EZ Cast M2 2) CPU: ARM Cortex A9 de un solo núcleo 3) Arquitectura: La GPU ofrece gráficos 3D con OpenGL ES2.0 y OpenVG 1.1; decodificador de vídeo HD (1080p a 60 fps); HDMI 1.4A. 4) Introducción de funciones: Miracast DLNA Airplay 5) Wi-Fi: IEEE 802.11 b/g/n 6) Aplicaciones estándar: -Música: MP3, WMA, WAV, OGG, AAC, FLAC, 3GP; -Reproductor de vídeo: MPEG2, MPEG4, AVI, WMV, MKV, MOV, RM, RMVB; -Galería: JPG,BMP,PNG. 7) Sistema operativo: Android 4.2 versión castrada 8) Capacidad de decodificación: 1080P 9) Aplicación: Recepción de pantalla WIFI 10) Sistema operativo compatible: Windows / Mac OS / iOS / Android 11) Tamaño: 73,15 mm (largo) x 28,60 mm (ancho) x 12,30 mm (alto) 12) Peso: 19g Especificación: Peso del paquete Peso de un paquete 0,10 kg/0,22 lb Un tamaño de paquete 15,2 cm x 10,2 cm x 3 cm (5,98 pulgadas x 4,02 pulgadas x 1,18 pulgadas) Cantidad por caja 80 Peso de la caja 7,04 kg/15,52 lb Tamaño de la caja 43 cm * 33 cm * 32 cm/16,93 pulgadas * 12,99 pulgadas * 12,6 pulgadas Contenedor de carga 20GP: 587 cajas * 80 uds. = 46960 uds. 40HQ: 1363 cajas * 80 piezas = 109040 piezas

Leer Más Menos

Características 1. Convertidor de cintas de vídeo a DVD 2. Juega videojuegos en la pantalla de tu computadora portátil a través de este adaptador de video USB 3. Vídeo y audio grabados siempre sincronizados 4. Admite múltiples entradas de video de S-Video y video RCA compuesto 5. Convierte tu PC en una estación de trabajo de grabación y edición de vídeo con todas las funciones 6. Configuración súper sencilla en minutos 7. Captura de imágenes fijas para álbum de fotos 8. Además de mirar videos en su computadora portátil o de escritorio, también puede grabar videos de movimiento completo o tomar una instantánea o una imagen fija desde diferentes dispositivos, como una videocámara DV, un reproductor de DVD/VCR, un receptor satelital, monitorear videos con sus sistemas de vigilancia de seguridad existentes o jugar videojuegos en su computadora para disfrutar de diversos entretenimientos de video. 9. Excelente selector/conmutador de vídeo: cambio fluido de fuente de vídeo entre PC, entrada de vídeo compuesto o entrada de S-Video al instante 10. Admite sistemas de vídeo de todo el mundo, incluidos NTSC, PAL y SECAM 11. Botón de captura de instantáneas para guardar imágenes fijas como archivo BMP o JPEG 12. Ventana de video redimensionable hasta visualización en pantalla completa 13. Compatible con WDM: cumple con el estándar WDM y funciona con todo el software de video compatible con este estándar. 14. Interfaz de videovigilancia: cualquier cámara de vigilancia CCTV o videocámara de seguridad se puede conectar a este dispositivo para que pueda convertir su computadora en un sistema/monitor de videovigilancia. Presupuesto 1. LED verde para indicador de encendido 2. Entrada de resolución de video en pantalla completa 3. Con conexión USB 2.0: la resolución de salida será una resolución de video DVD de pantalla completa de hasta 720x480 a 30 fps para NTSC y 720 x 576 a 25 fps para PAL 4. Con conexión USB 1.1: la resolución de vídeo alcanza hasta 320x240 a 30 fps para NTSC y 320x288 a 25 fps de vídeo para PAL 5. Entrada de vídeo: 1 entrada de S-video y entrada de vídeo compuesto tipo RCA 6. Sistema de vídeo compatible: NTSC, PAL y SECAM 7. Admite todos los formatos de captura/grabación de vídeo, incluidos DV, MPEG-1, MPEG-2, MPEG-4 con códec DivX, SVCD/VCD, DVD, AVI, WMV 8. Ajuste de alta tasa de bits MPEG hasta 10000K bps 9. Admite ajustes de color, incluidos brillo, contraste, saturación, tono y nitidez. 10. Funciona con alimentación por USB. No necesita adaptador de corriente. 11. Consumo de energía: 5 V CC, 250 mA (máx.) a través del puerto USB Compatible con: Win7/8 No necesita controlador. Solo copie y pegue el software del CD en su computadora. Ahora puede usarlo sin instalar ningún otro controlador. 12. El paquete incluye: - Adaptador de vídeo USB 2.0 con audio x 1 - Cable USB x1 - 1 CD con software Especificación: Peso del paquete Peso de un paquete 0,10 kg/0,22 lb Un tamaño de paquete 15 cm x 10 cm x 3 cm (5,91 pulgadas x 3,94 pulgadas x 1,18 pulgadas) Cantidad por caja 208 Peso de la caja 19,76 kg/43,56 lb Tamaño de la caja 60 cm x 40 cm x 39 cm (23,62 pulgadas x 15,75 pulgadas x 15,35 pulgadas) Contenedor de carga 20GP: 284 cajas * 208 uds. = 59072 uds. 40HQ: 661 cajas * 208 piezas = 137488 piezas

Leer Más Menos

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

Features1. The product can be quickly woken up and enter the standby state to achieve intelligent power saving2. 3 million pixel high-definition image, intelligent dual-light full-color night vision3. Built-in 5200mAh battery, removable solar panel for continuous charging, ultra-low power consumption, ultra-long standby time4. Built-in microphone and speaker, support two-way voice intercom5. Built-in PIR alarm sensor, provide accurate and real-time alarm, push the mobile phone APP6. Support PTZ control, 330 degrees left and right, 90 degrees up and down7. Support cloud storage and 128G TF card local storage8. APP: Support Android/IOS, name UBox9. IP66 outdoor protectionParameter:1. Pixel: 2048x1536 3MP2. Alarm mode:Detection mode: PIR human body induction + AI humanoid detectionDetection distance: 20mDetection angle: 120 degreesAlarm method: double induction confirmation push alarm information to mobile phone3. PTZ:Gimbal angle: horizontal 355 degrees / vertical 120 degrees Rotation speed: horizontal 55 degrees/second / vertical 40 degrees/second4. Night Vision Mode:Infrared light: Infrared LED distance 30mWhite light: White LED distance 30m5. Voice:Built-in speaker: 3WBuilt-in microphone: monitoring range 20m6. Lens:Focal length: 3.6mmAngle: 120 degrees7. Storage:Cloud storage: cloud storage (alarm recording)Local storage: TF card (maximum 128G)8. Power supply:Power supply mode: solar + 18650 batterySolar cell power: 3.5WBattery capacity: support 2 18650 batteries (2x2600mAh)Maximum working power: 3WStandby power: 0.003W9. Working environment: indoor/outdoor10. Operating temperature: -30 degrees - +60 degrees11. Working humidity: 0%~90%RHProduct List:- Solar panel x 1- WIFI camera x 1- Screw Pack x 1- USB charging cable x 1- Manual x 1- Positioning paper x 1Specification: General Power Depletion 3W Performance Motion detection, Night Vision, Alarm detection Memory up to 128GB (not included) Function PTZ, Motion Detect, Cloud storage System / Hardware Mobile Access Android, iPhone OS Pixels 3.0MP Lens 3.6mm Image Flip Function Horizontal Flip, Vertical Flip Pan/Tilt-Horizontal Angle 355 degrees Pan/Tilt-Vertical Angle 120 degrees Media Format Video Compression Format H.265 Resolution 2048*1536 Sub Stream 2048 x 1536 Night Vision Infrared Distance 30m NVR Wireless Port WiFi Operation temperature -30 to 60 Degree Celsius Operation humidity Less than 90 percent Physical Environment Environment Outdoor Operate Temperature -30 to 60 Degree Celsius Working Humidity 0 to 90 percent Battery Work Time 24 hours Package Weight One Package Weight 0.88kgs / 1.93lb One Package Size 18cm * 17cm * 14cm / 7.09inch * 6.69inch * 5.51inch Qty per Carton 12 Carton Weight 11.50kgs / 25.35lb Carton Size 36cm * 36cm * 40cm / 14.17inch * 14.17inch * 15.75inch Loading Container 20GP: 514 cartons * 12 pcs = 6168 pcs40HQ: 1194 cartons * 12 pcs = 14328 pcs

Leer Más Menos

Características 1. Concentrador USB-C multipuertos 5 en 1: el concentrador USB C inteligente combina todas las funciones que necesitas. Amplía un puerto tipo C a un puerto HDMI 4K x 1, puerto USB 3.0 x 1, puerto USB 2.0 x 2, puerto de carga de suministro de energía USB-C PD x 1. Puede resolver el problema de un solo puerto USB C de su computadora portátil. Todos los puertos del concentrador pueden funcionar simultáneamente. 2. Adaptador USB-C a HDMI 4K 30Hz: duplica o extiende la pantalla de tu teléfono/computadora portátil/tableta con el puerto HDMI del concentrador USB-C y transmite directamente video 4K UHD 30Hz a HDTV, monitor o proyector o compatible con versiones anteriores de 1080P 120Hz y 2K 120Hz. Disfruta de películas con tu familia en pantallas grandes o haz una presentación vívida en una reunión. 3. Entrega de energía de 60 W: el adaptador multipuerto USB C admite carga PD de hasta 60 W para MacBook (la potencia de entrada específica está relacionada con su cargador). Y proporciona energía adicional para discos duros, unidades de DVD y accesorios que se conectan al puerto USB. No se preocupe más por que su dispositivo se quede sin energía. Transferencia de datos de 4,5 Gbps: este adaptador USB C ofrece 1 puerto USB 3.0 adicional y 2 puertos USB 2.0 para conectar múltiples dispositivos periféricos USB como unidad flash, disco duro, teclado, mouse, impresora, reproductor de MP3 y más, lo que puede evitar el problema de enchufar y desenchufar sus dispositivos repetidamente. 5. Compacto y portátil: fabricado con aleación de aluminio de primera calidad. Ligero y de tamaño de bolsillo, es cómodo de llevar en el bolso de la computadora portátil cuando viaja o en un viaje de negocios. Presupuesto 1. Modelo del producto: ORICO-PW11-5P 2. Material: aleación de aluminio + ABS 3. Proceso de superficie: oxidación anódica 4. Dimensiones: 95 x 44,5 x 17 mm 5. Longitud del cable: 0,2 m 6. Interfaz de entrada: USB-C 7. Interfaz de salida: USB-A 3.0 (5 Gbps) x 1, USB-A 2.0 (480 Mbps) x 2, USB-C (PD60W) x 1, HDMI (4K 30 Hz) x 1 8. Sistema compatible: Windows/Linux/Mac OS/Android Especificación: Peso del paquete Peso de un paquete 0,10 kg/0,22 lb Un tamaño de paquete 19 cm x 8 cm x 2 cm (7,48 pulgadas x 3,15 pulgadas x 0,79 pulgadas) Cantidad por caja 180 Peso de la caja 17,50 kg/38,58 lb Tamaño de la caja 52 cm x 44 cm x 25 cm (20,47 pulgadas x 17,32 pulgadas x 9,84 pulgadas) Contenedor de carga 20GP: 466 cajas * 180 uds. = 83880 uds. 40HQ: 1082 cajas * 180 piezas = 194760 piezas

Leer Más Menos

1. The oscilloscope has a real-time sampling rate of 1GSa/s and an analog bandwidth of 100MHz x 22. Complete trigger function (single/normal/automatic), both periodic analog signal and non-periodic digital signal can be used freely3. Built-in DDS function signal generator and the industrys original chopping output (@2.5vpp), all signal frequency steps are 1Hz, support 14 kinds of standard function signals and a customizable chopping signal, the chopping output device intercepts part or all signals4. The complex signal measured by the oscilloscope is used as the output signal of the signal generator, which can store up to 1000 custom cut-off signals5. The built-in high-voltage protection module can withstand continuous voltage up to 400V, so there is no need to worry about the oscilloscope burning accident caused by the probe not moving to the 10x position7. Large time base scrolling method, which can monitor slow level changes8. Equipped with an efficient one-key automatic display of measurement waveforms, without cumbersome adjustments9. 7-inch 800x480 resolution high-definition LCD display10. Cursor measurement function, when manually reading the amplitude and frequency parameters, there is no need to read the background scale unit and quantity, no need to convert, and directly obtain the peak-to-peak value and frequency. Very convenient screen capture and waveform storage function10. Built-in 1GB storage space, can store 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform with one key11. Powerful waveform image manager, supports thumbnail browsing, viewing, viewing details, page turning, deletion, and waveform zooming in, zooming out, moving, etc., which is convenient for secondary analysis12. The fuselage is equipped with a USB interface, which can be connected to a computer to realize the sharing of screenshots and pictures of itself, which is convenient for secondary analysis13. Graphical display function, which can compare and judge the amplitude, frequency and phase of two groups of signals14. The FFT viewing function can estimate the harmonic components of the signal15. Built-in DDS signal generator, supports 12 kinds of function signals16. For high intelligent decoding algorithm, the encoder has unlimited life, intelligent anti-burn function, 1X can withstand 400V withstand voltage17. With 100MHz x 2 analog bandwidth and @1GSa/s sampling rate (1X = 5MHz, 10X = 100MHz)18. High measurement voltage range: 1X can measure 0~40V, 10X can measure 0~400V19. Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period20. Cursor measurement function: convenient for manual measurement of period, frequency and voltage =21. Perfect trigger function (single, normal, automatic), freeze waveform display at any time (pause function)22. With screen brightness adjustment function and background grid brightness adjustment function, easy to carry23. Material: ABS24. Analog log bandwidth: 100MHz x 225. Number of channels: 2 channels26. Real-time sampling rate: 1GSa/s27. Vertical sensitivity: 50 mV/div ~ 500 V/div28. Horizontal time base range: 50S/div～10nS/div29. Test voltage: 40 V (1X probe), 400 V (10X probe)30. Storage depth: 240Kbit31. Input resistance: 1 milliohm32. ADC precision: 8bits33. Coupling method: AC/DC34. Trigger mode: single, normal, automatic35. Trigger edge: rising edge/falling edge36. External trigger voltage: 0~40 V37. Expansion port: USB image exportPacking list:FNIRSI-1014D Oscilloscope host x 1Matched 100MHz probes (1X and 10X) x 2Clip x 1EU power adapter x 1USB cable x 1English user manual x 1P4100 probe (optional) x 1Specification: Package Weight One Package Weight 1.70kgs / 3.76lb One Package Size 37cm * 20cm * 13cm / 14.57inch * 7.87inch * 5.12inch Qty per Carton 2 Carton Weight 4.50kgs / 9.92lb Carton Size 39cm * 22cm * 28cm / 15.35inch * 8.66inch * 11.02inch Loading Container 20GP: 1110 cartons * 2 pcs = 2220 pcs40HQ: 2576 cartons * 2 pcs = 5152 pcs

Leer Más Menos

1. The oscilloscope has a real-time sampling rate of 1GSa/s and an analog bandwidth of 100MHz x 22. Complete trigger function (single/normal/automatic), both periodic analog signal and non-periodic digital signal can be used freely3. Built-in DDS function signal generator and the industrys original chopping output (@2.5vpp), all signal frequency steps are 1Hz, support 14 kinds of standard function signals and a customizable chopping signal, the chopping output device intercepts part or all signals4. The complex signal measured by the oscilloscope is used as the output signal of the signal generator, which can store up to 1000 custom cut-off signals5. The built-in high-voltage protection module can withstand continuous voltage up to 400V, so there is no need to worry about the oscilloscope burning accident caused by the probe not moving to the 10x position7. Large time base scrolling method, which can monitor slow level changes8. Equipped with an efficient one-key automatic display of measurement waveforms, without cumbersome adjustments9. 7-inch 800x480 resolution high-definition LCD display10. Cursor measurement function, when manually reading the amplitude and frequency parameters, there is no need to read the background scale unit and quantity, no need to convert, and directly obtain the peak-to-peak value and frequency. Very convenient screen capture and waveform storage function10. Built-in 1GB storage space, can store 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform with one key11. Powerful waveform image manager, supports thumbnail browsing, viewing, viewing details, page turning, deletion, and waveform zooming in, zooming out, moving, etc., which is convenient for secondary analysis12. The fuselage is equipped with a USB interface, which can be connected to a computer to realize the sharing of screenshots and pictures of itself, which is convenient for secondary analysis13. Graphical display function, which can compare and judge the amplitude, frequency and phase of two groups of signals14. The FFT viewing function can estimate the harmonic components of the signal15. Built-in DDS signal generator, supports 12 kinds of function signals16. For high intelligent decoding algorithm, the encoder has unlimited life, intelligent anti-burn function, 1X can withstand 400V withstand voltage17. With 100MHz x 2 analog bandwidth and @1GSa/s sampling rate (1X = 5MHz, 10X = 100MHz)18. High measurement voltage range: 1X can measure 0~40V, 10X can measure 0~400V19. Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period20. Cursor measurement function: convenient for manual measurement of period, frequency and voltage =21. Perfect trigger function (single, normal, automatic), freeze waveform display at any time (pause function)22. With screen brightness adjustment function and background grid brightness adjustment function, easy to carry23. Material: ABS24. Analog log bandwidth: 100MHz x 225. Number of channels: 2 channels26. Real-time sampling rate: 1GSa/s27. Vertical sensitivity: 50 mV/div ~ 500 V/div28. Horizontal time base range: 50S/div～10nS/div29. Test voltage: 40 V (1X probe), 400 V (10X probe)30. Storage depth: 240Kbit31. Input resistance: 1 milliohm32. ADC precision: 8bits33. Coupling method: AC/DC34. Trigger mode: single, normal, automatic35. Trigger edge: rising edge/falling edge36. External trigger voltage: 0~40 V37. Expansion port: USB image exportPacking list:FNIRSI-1014D Oscilloscope host x 1Matched 100MHz probes (1X and 10X) x 2Clip x 1US power adapter x 1USB cable x 1English user manual x 1P4100 probe (optional) x 1Specification: Package Weight One Package Weight 2.61kgs / 5.76lb One Package Size 37cm * 20cm * 13cm / 14.57inch * 7.87inch * 5.12inch Qty per Carton 2 Carton Weight 4.30kgs / 9.48lb Carton Size 39cm * 22cm * 28cm / 15.35inch * 8.66inch * 11.02inch Loading Container 20GP: 1110 cartons * 2 pcs = 2220 pcs40HQ: 2576 cartons * 2 pcs = 5152 pcs

Leer Más Menos

About The Product1. LINEPAUDIO B877 personal listener. Designed for players who want to listen to their voices via headphones or earphones, such as their vocal and musical instruments, mainly for drummers, who need to mix click tracks with listener signals. Church choir singing and others needs to listen to the sound of their music. All 3 stereo channels personal monitor desk headphone mixer, 2. Three input channels are outputted by 1/4 and 1/8 (6.5 and 3.5 mm) of headphone holes through various level controllers, and the microphone channel and device output are connected to ground switches. Easy to eliminate the current ground buzzing noise. This product is an ideal choice for live band and church musicians as well as studio musicians and singers. It has the ability to customize the main music and the voice and instrument input of musicians. Make the product become an effective and multifunctional listening device. 3. Line input: 1/4 TRS stereo Jack for connecting line level signal sources, such as mixer listening / auxiliary output, cassette player output, CD player output, and etc. 4. Ground connecting: Plug jumper to disconnect the chassis grounding input of microphone pin 1 and the microphone passes through. 5. The microphone: XLR Jack is in parallel with the microphone input Jack (hardwired) for delivery to the mixer or other microphone-level input device. 6. Microphone input: XLR balanced Jack for connecting capacitors or moving-coil microphones. 7. Device input: 1/4 TRS stereo Jack for connecting device or line level signals, such as guitar processors, keyboards, musical instruments, keyboards, or previous outputs of musical instruments. 8. Mono / stereo jumper: Select whether the input Jack is mono or stereo. 9. Left / right output: Transformer balanced XLR output from device input. 10. hGrounding route: A plug jumper used to disconnect the chassis from the output Jack of the 1/4 RS device. 11. Mono / stereo jumper (located below the line input): select whether the line input Jack is mono or stereo. 12. Note: The interface of the XLR Jack under MONO mode can be used for "Phantom Power" which is required to connect the mixer. 13. Headset output: 1/4 stereo Jack and 1/8 stereo Jack for connecting stereo headphones or headphones. 14. Line level: Adjust the level signal from the line input to the headphone mixing. 15. Microphone level: Adjust the level signal from microphone input to headphone mixing. 16. Inst. level: Adjust the level signal from inst. input to headphone mixing. 17. The line input is connected to a 1/4 "stereo or mono plug." If the plug is 6.35mm stereo, select the mono / stereo jumper set by stereo. The plug is a single-ended mono channel. Select mono / stereo jumper settings. 18. Microphone input is connected to a dynamic microphone or capacitive microphone via a standard XLR cable. If you are using a capacitive microphone, you need to charge it with power from the mixer connected to the microphone Jack. This Jack transmits the phantom power from the mixer to the microphone. Connect the microphone through the Jack to the mixer as needed. 19. Instrument input is connected to the guitar preamplifier output, keyboard or any stereo or monophonic instrument signal. Select stereo or mono.Features1. Max input level: -20 dB XLR, +40dB line, +15dB instrument. 2. Input impedance: 50K ohms 3. Output frequency response: 10-30kHz +/-3dB 4. Output impedance HDPHN: 10ohms 5. Output impedance: 2 ea; 100ohms balanced 6. Gain: 20 dB 1/4 inch, 50dB XLR 7. HDPHN frequency response: 20Hz-20kHz 8. S/N ratio: 90dB 9. Power: DC 9-16V 10. 1/4 TRS stereo / mono listening input. 11. The XLR microphone enters w/ pass-through. 12. 1/4 TRS stereo instrument input, 6.35mm / 3.5mm stereo / mono output.Specification: General Model B877 Product Size 130*85*35mm Available Plugs US Plug Weight 447g Package Include Package Contents 1 x Power Adapter 1 x Listening Mixer Package Weight One Package Weight 0.66kgs / 1.46lb One Package Size 22cm * 20cm * 6cm / 8.66inch * 7.87inch * 2.36inch Qty per Carton 20 Carton Weight 14.20kgs / 31.31lb Carton Size 44cm * 38cm * 35cm / 17.32inch * 14.96inch * 13.78inch Loading Container 20GP: 455 cartons * 20 pcs = 9100 pcs40HQ: 1057 cartons * 20 pcs = 21140 pcs

Leer Más Menos