Resultados de la búsqueda de "smart home sensor"

Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

1. Wireless mouse, you can get line-by-line precise documents and ultra-fast scrolling of long web pages; switch modes easily with a flick of the smart wheel. 2. This comfortable mouse is designed for small to medium hands for an optimal fit. 3. This work mouse features a contoured shape, soft thumb area, and rubber side grips that keep your hands snug in place for long-lasting comfort. 4. Connect this wireless computer mouse instantly via bluetooth low energy or Logi Bolt USB eeceiver. 5. Less noise and better concentration: Whether in the office or working from home, the Logitech Signature M650 is a quiet mouse that reduces click noise by 90% with SilentTouch technology. 6. Customizable side buttons: Use Logitech Options+ available on Windows and macOS to customize the side buttons on your computer mouse to use your favorite shortcuts - such as back/forward or copy/paste 7. Works on multiple platforms: experience seamless compatibility with Windows, macOS, Linux, Chrome OS, ipadOS, and Android operating systems with the Logitech Signature M650 Wireless Bluetooth Mouse 8. Specification: Sensor Technology: Logitech Advanced Optical Tracking Nominal: 400 dpi, maximum: up to 2000 Button: number of buttons: 5 (left/right click, back/forward, middle scroll wheel) Battery Type: 1 x AA battery (not included) Wireless range: 10m Optional software: macOS 10.14 or later and Logitech Options+ support on Windows 10, 11 or laterSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 18cm * 8cm * 5cm / 7.09inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 52cm * 42cm * 26cm / 20.47inch * 16.54inch * 10.24inch Loading Container 20GP: 469 cartons * 100 pcs = 46900 pcs40HQ: 1090 cartons * 100 pcs = 109000 pcs

Leer Más Menos

Features 1. Ultra-small body, feel comfortable 2. Bring your own hotspot, remote playback 3. Alarm push, remote monitoring 4. No light night vision, comes with battery 5. HD camera, TF card storage Product Function 1. Smaller micro-monitoring: 39 x 15.9mm in diameter, ultra-small and ultra-thin. Strong magnetic adsorption, smart wear, personal, home, business super security monitoring, law enforcement, driving, cycling records 2. 720PHD HD video quality, H.264 compression format 3. 6 patch infrared lights, night vision, no light, invisible 4. Function: stand-alone recording, local monitoring, remote monitoring, loop coverage, video playback, screen rotation, motion detection alarm, resolution switching 5. Use scenario: Lightweight outdoor sports, administrative law enforcement, life record, driving record, personal security monitoring, elderly child care, hotel monitoring, forensic investigation, etc. Product parameters Brand: CAMSOY Model: C2 Pixel: 2 million (dpi) Type: Wireless Camera Style: miniature camera Image Sensor: CMOS Horizontal resolution: 720 (TVL) Minimum illumination: 0.05 (Lux) Resolution: 1280x720 Lens: 3.6 (mm) Working temperature: -10 to 60 degree Backlight compensation: EV Size: 40 x 15.9mm (inches) Power supply voltage: 5 (V) Electronic shutter: not supported Weight: 19g Alarm function: motion detection alarm Material: ABS Use environment: life scene Surveillance camera lens: OV Lens focal length: F2.6 Accessories 1 x instruction manual 2 x magnetic rotating base 1 x magnetic sheet 1 x USB cable 1 x reset needleSpecification: General Model C2 Allowable Voltage 5V Performance Motion detection, Night Vision, Intelligent detection, Real-time video capture and recording, Alarm detection Remote Operation Supervisory Control Memory up to 64GB (not included) Interface TF card slot, Micro USB View Angle 90 degree System / Hardware Focal Distance F2.6 Image Sensor CMOS Lens 3.6mm Minimum Illumination 0.05LUX Backlight Balance Yes Media Format Video Compression Format H.264 Resolution 1280*720 Video Format MP4 NVR Wireless Port WiFi Physical Environment Environment Outdoor, Indoor Operate Temperature -10 to 60 Degree Celsius Battery Capacity 300mAh Dimensions Size 39x15.9mm Weight 19g Package Include Package Contents 1 x USB Cable 1 x Base 1 x User Manual 1 x Reset Needle Package Weight One Package Weight 0.33kgs / 0.72lb One Package Size 18cm * 12cm * 3cm / 7.09inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 23.80kgs / 52.47lb Carton Size 62cm * 39cm * 35cm / 24.41inch * 15.35inch * 13.78inch Loading Container 20GP: 315 cartons * 100 pcs = 31500 pcs40HQ: 731 cartons * 100 pcs = 73100 pcs

Leer Más Menos

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Leer Más Menos

1. The Model 109 touch-screen LCD thermostat utilizes single-chip microcomputer control technology, offering extremely high reliability and strong anti-interference capabilities. It is suitable for water heating systems and high-power electric heating systems. The thermostat automatically switches the controlled device on or off based on the users preset temperature value. Examples include valve actuators, heating cables, underfloor heating, and electric heaters. It helps you achieve an energy-efficient and comfortable living environment!2. Manual and automatic control modes are available for different users.3. Multiple time period combinations: 5+2/6+1/74. Up to 6 time periods and corresponding set temperatures can be programmed per day.5. Flame-retardant material for safety and reliability.6. Built-in button battery ensures the clock continues to run normally after a power outage, without affecting the time period settings.7. Keyboard lock function prevents accidental operation by children.8. Remote control via smartphone APP (WiFi version) - The WiFi version digital thermostat can be remotely controlled via a smartphone APP. In addition, it is compatible with voice control platforms such as Amazon Alexa and Google Assistant, allowing users to conveniently adjust the temperature using voice commands.Technical Parameters:1. Dimensions: 86 x 86 x 37 (mm)2. Input Voltage: AC 220V, 50/60HZ3. Maximum Contact Current/Maximum Load Power: 16A 3600W4. Setting Step: 0.5 degrees Celsius/step5. Display Resolution: 0.1 degrees Celsius6. Built-in Sensor: NTC thermistor-- Measurement Range: 0-40 degrees Celsius-- Setting Range: 5-35 degrees Celsius7. External Sensor: NTC thermistor-- Measurement Range: 0-95 degrees Celsius-- Setting Range: 0-90 degrees Celsius8. When the thermostats operating environment temperature or the temperature detected by the thermostat is below 0 degrees Celsius, the display shows 0 degrees Celsius.Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 12cm * 10cm * 8cm / 4.72inch * 3.94inch * 3.15inch Qty per Carton 100 Carton Weight 22.00kgs / 48.50lb Carton Size 48cm * 31cm * 43cm / 18.9inch * 12.2inch * 16.93inch Loading Container 20GP: 416 cartons * 100 pcs = 41600 pcs40HQ: 967 cartons * 100 pcs = 96700 pcs

Leer Más Menos

1. Batería: Ninguna 2. Tipo de producto: Aspiradora robot 3. Control remoto: ninguno 4. Características: automático, carga automática. 5. Voltaje de entrada (V): 5 V 6. Tamaño del producto: 18X18X7 cm 7. Tamaño del embalaje: 19 x 19 x 8,5 cm. 8. Peso del producto: 420 gramos 9. Nombre del producto: Aspiradora Lazy Helper de limpieza (recargable) 10. Peso neto del producto: 413 gramos (incluida la caja de color), 306,4 gramos (máquina individual) 11. Tamaño del producto: 18 cm 12. Material del producto: ABS 13. Lista de productos: 1 host, 1 cable de carga USB 14. Tamaño de la caja exterior: 39 x 36 x 59 cm. 15. Cantidad de embalaje: 24 piezas en una caja. 16. Peso bruto/caja: 11 kg 17. Peso neto/caja: 10 kg 18. Características del producto: Universal para viajes, limpieza de suelos (no necesita papel aspirador) 19. Función del producto: robot de barrido automático; dispositivo de detección automática, giro automático al encontrar obstáculos Especificación: Peso del paquete Peso de un paquete 0,52 kg/1,15 lb Un tamaño de paquete 20 cm x 20 cm x 9 cm (7,87 pulgadas x 7,87 pulgadas x 3,54 pulgadas) Cantidad por caja 35 Peso de la caja 15,00 kg/33,07 lb Tamaño de la caja 30 cm * 50 cm * 50 cm / 11,81 pulgadas * 19,69 pulgadas * 19,69 pulgadas Contenedor de carga 20GP: 355 cajas * 35 piezas = 12425 piezas 40HQ: 825 cajas * 35 piezas = 28875 piezas

Leer Más Menos