waveshare

OverviewArduino is a massive ecosystem, if there is a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this.What is...

Features1. Function of this aluminum heat sink is to cool down the board and make it operate safely 2. The aluminum heat sink can reduce the risk of hardware failure because of overheating 3. Essential for high-performance computing: Keeps module temperatures low to avoid...

Overview1. This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.2. Through the onboard USB and UART interface, it can be directly plugged into a...

BME280 Environmental Sensor, Temperature, Humidity, Barometric PressureOverview1. A tiny sensor breakout with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.2. Due to its ultra small form factor, low power...

Capacitive Fingerprint Reader, onboard processor STM32F105, commercial fingerprinting algorithm, semiconductor sensorOverview1. The Capacitive Fingerprint Reader is a standard fingerprinting module designed for secondary development, allows fast and stable fingerprint verification.2. Based on a high-speed digital processor STM32F105R8, combined with high-security commercial fingerprinting algorithm, and...

OverviewThis is an edge connector expansion board designed for micro:bit, breakout the I/O pins to 2.54mm pitch pinheaders for easy use.SpecificationsDimension: 82.05mm x 36.10mmThrough holes diameter: 2mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 2cm /...

About The ProductThe Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers...

Overview1. Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.2. Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, 3. etc.3. All the I/O ports are accessible on...

Overview1. Core407V is a small STM32 development board that features an STM32F407VET6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F family.2. As a minimal ready-to-run system, the Core407V integrates USB communication interface, JTAG/SWD programming/debugging interface, clock...

1. Good condition,with high quality ,great performance2. Cooling fan run smoothly, long life keep CPU safe without overheating3. Compatible with Raspberry Pi CM4 robotic projects and development boardsSpecification:1. Rated Power: 1W (5V, 0.2+/-0.02A); 1.62W (for 12V, 0.135+/-0.02A)2. Rated Speed: 5000+/-10%RPM( for 5V); 8000+/-10%RPM (...

1. Module Support: NVIDIA Jetson TX2 NX Module 2. Power supply: DC 5V input 3. Structure: Embedded fan, aluminum alloy shell 4. Electrical parameters: 0.65W (5V/0.13A) 5. Cable length: 37+/-3mm 6. Fan: PWM speed control, 5500+/-10%RPMSpecification: Package Weight One Package Weight 0.09kgs / 0.20lb...

Temperature-Humidity Sensor, DHT11 OnboardOverviewThis is a calibrated digital temperature and humidity module with onboard sensor DHT11. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications1. Temperature- Resolution : 1 degree C- Accuracy : +/-2 degree C- Measuring range...

Overview1. This is a calibrated digital temperature and humidity module with onboard sensor DHT22 (AM2302), which features higher accuracy and wider measuring range than DHT11.2. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications1. Temperature- Resolution : 0.1degree...

1. Fuente de alimentación: 9-24 V 2. Interfaz de comunicación: puerto RS485 x 1, puerto Ethernet x 1 3. Velocidad en baudios: 300-115200 bps 4. Bits de datos: 5-9 bits 5. Configuración: host, navegador web, biblioteca de funciones de gestión de dispositivos 6. Método...

Specifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Network: - Ethernet: Dual Gigabit Ethernet RJ45 - M.2 B KEY, for connecting 5G / 4G module - Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB 3.2 Gen1...

1. CM4 Socket: Suitable for all variants of Compute Module 4 2. Networking: - Dual Gigabit Ethernet RJ45 - M.2 B KEY, for connecting 5G / 4G module - Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB: USB 3.2 Gen1...

Overview1. Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm in diameter, even like the cigarette smoke2. Low power consumption, analog voltage output, the output level is linear with dust density3. Embedded voltage boost circuit to support wide range of power supplySpecifications1. Sensitivity :...

1. ESP32-S3-DEV-KIT-N8R8 is a microcontroller development board with a small size and a variety of digital interfaces.2. In terms of software, you can choose ESP-IDF, Arduino, MicroPython and other development environments for development, so that you can get started easily and quickly, and apply...

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.2. 240MHz Xtensa 32-bit LX7 dual-core processor3. Easy to integrate, 32-bit LX7, 2MB PSRAM, wireless network, dual-core processor4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, running frequency 240mhz5. Integrated 512KB SRAM, 384KB ROM, 2MB...

1. Pixel: 96 x 48=4608 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: 5V / 2.5A (VH4 connector input)9. Power: within 20W10. Size: 24 x 12cmFeatures:1. 4608 independent RGB led,...