Módulo electrónico
-
WAVESHARE WAVESHARE ESP32-P4-Module Core Board, Based On ESP32-P4 And ESP32-C6 Dual-Chip Design, 16MB, 32MB
1. Main controller chip: ESP32-P4NRW32 2. RF chip: ESP32-C6H8 3. PSRAM size: 32MB 4. Flash size: 16MB / 32MB5. RF band: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.3 6. Operating voltage: 3.3V 7. Connector type: Pin header, 1mm pitch8. Size: Approx. 25 x 25 x 3.3mmFeatures:1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip, supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Powerful image and audio processing capabilities; image and audio processing interfaces include a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder5. 32MB PSRAM stacked within the chip package, with 16MB / 32MB NOR Flash integrated outside the package (optional)6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and privilege separationSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 760 Carton Weight 16.20kgs / 35.71lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 760 pcs = 313120 pcs40HQ: 958 cartons * 760 pcs = 728080 pcs
£9.99 - £10.99
-
Waveshare Waveshare ESP32-S3 Development Board With 0.85-Inch LCD 128×128, Dual Mic Array, Wi-Fi/BLE 5, AI Support, ESP32-S3-LCD-0.85
1. The ESP32-S3-LCD-0.85 is a microcontroller development board supporting 2.4GHz Wi-Fi and Bluetooth BLE 5. It features a small square-box molded plastic enclosure, compact and aesthetically pleasing with excellent texture. On-board peripherals include a 0.85-inch IPS color LCD display, Micro SD card slot, 8 RGB colorful lights, and a low-power audio codec chip, facilitating development for multimedia and interactive applications. Leveraging these hardware resources, the product enables functions like image display, audio playback, and lighting effects control. It is suitable for rapid prototyping and can be embedded into end products for personalized expansion and secondary development.2. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor, with a clock frequency up to 240MHz.3. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an on-board antenna.4. Built-in 512KB SRAM, 384KB ROM, 8MB Flash, and 8MB PSRAM.5. Uses a Type-C interface, enhancing user convenience and device compatibility.6. On-board 0.85-inch LCD screen, 128 x 128 resolution, 65K colors.7. On-board 8 ring-shaped RGB colorful lights, programmable for various dynamic lighting effects.8. On-board 3.7V MX1.25 lithium battery charge/discharge interface.9. Exposed I2C, UART, and other solder pads allow for external device connections and debugging, enabling flexible peripheral configuration.10. On-board Micro SD card slot provides expanded storage, fast data transfer, and flexibility for data logging and media playback, simplifying circuit design.11. On-board resources include the ES8311 audio codec chip, dual-MIC microphone module, and others. LCD Screen Parameters:1. Operating voltage 3.3V/5V 2. Display size 15.21 x 15.21 mm 3. Display resolution 128 x 128 pixels 4. Display color: 65K 5. Display panel: IPS 6. Pixel pitch 39.6 x 118.8 um 7. Interface type: 4-wire SPI8. Driver IC: GC9107Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 10.70kgs / 23.59lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs
£14.99
-
WAVESHARE WAVESHARE RP2350 4.3inch Capacitive Touch Display Development Board, Without Case, With Plastic Case
1. The RP2350B microcontroller chip, designed based on the Raspberry Pi architecture2. A unique dual-core, dual-architecture design featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at up to 150MHz, allowing users to switch flexibly between the two architectures3. Features 520KB of SRAM, 16MB of on-board on-chip Flash, and 2MB of PSRAM4. Features a Type-C interface, eliminating the need to worry about orientation when plugging in5. Features a 4.3-inch on-board capacitive touchscreen LCD with 800 × 480 resolution and 65K colors6. Supports I2C interface control for capacitive touch, 5-point touch, and interrupts7. On-board resources include CAN, RS485, I2C interfaces, and isolated digital I/O8. On-board voltage regulator supports a wide input voltage range of 7V to 36V9. Inputs feature bidirectional optocoupler isolation, supporting both passive and active digital inputs; active inputs support both positive and negative voltages10. Outputs feature optocoupler isolation with enhanced drive capability, providing a sink current of up to 450mA (MAX)11. USB 1.1 host and device support12. Supports low-power sleep and hibernation modes13. Can be recognized as a mass storage device via USB for drag-and-drop program downloading14. Precise on-chip clock and timers15. Built-in temperature sensor for real-time chip temperature monitoring16. 12 programmable I/O (PIO) state machines for custom peripheral support17. Size: without case about 11.24 x 7.51 x 1.74 cm; with case about 11.63 x 7.9 x 1.8 cmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 80 Carton Weight 17.00kgs / 37.48lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 80 pcs = 37280 pcs40HQ: 1083 cartons * 80 pcs = 86640 pcs
£35.99 - £42.99
-
Waveshare Waveshare ESP32-S3 AIoT Camera Development Board, With GC0308 Camera, With GC2145 Camera, With OV3660 Camera, With OV5640 Camera
1. This product is an AI development board based on ESP32-S3, integrating camera interface (DVP), SPI/QSPI display interface, and audio capture and playback functions, balancing low cost, high performance, and low power consumption to meet diverse smart terminal development needs. It supports integration with online AI platforms such as Xiaozhi/Doubao/DeepSeek, enabling human-computer interaction functions like voice dialogue and Q&A recognition. It also provides an Edge Impulse object detection example supporting real-time and multi-object recognition, suitable for rapid development of AI voice interaction, edge vision detection, HMI screen applications, and smart camera products. 2. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a maximum main frequency of 240MHz. 3. Built-in 512KB SRAM, 384KB ROM, onboard 8MB PSRAM and 16MB Flash. 4. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication with excellent RF performance. 5. Dual microphone array supporting noise reduction and echo cancellation for high-quality voice interaction. 6. Expansion and interfaces: --SPI/QSPI LCD display interface --24PIN DVP camera interface --USB, I2C, and UART interfaces accessible. 7. Onboard lithium battery charging circuit supports 3.7V lithium battery power supply. 8. Reserved 2 user-defined buttons. 9. The overall solution is highly integrated with rich interfaces, suitable for rapid prototyping and application deployment of AIoT smart terminal products.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 12.60kgs / 27.78lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs40HQ: 1354 cartons * 96 pcs = 129984 pcs
£16.99 - £21.99
-
Waveshare Waveshare ESP32-S3 LoRa Development Board With LR1121 3rd-Gen RF Chip, HF Version, LF Version, HF Kit, LF Kit
1. Equipped with the Xtensa 32-bit LX7 dual-core processor, with a main frequency up to 240MHz, delivering robust performance; supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), meeting diverse wireless connectivity needs 2. Built-in 512KB SRAM, 384KB ROM, stacked 4MB Flash, and 2MB PSRAM, offering abundant resources 3. Adopts stamp hole design for enhanced integration, facilitating independent baseboard design 4. Rich peripheral interfaces including 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, and 2 × ADC 5. Utilizes LR1121, the third-generation low-power LoRa transceiver from Semtech's LR11xx series 6. Supports Sub-GHz (150MHz to 960MHz), S-band (2.0GHz to 2.1GHz), and 2.4GHz ISM frequency bands 7. Connects to cloud platforms via LoRa or LoRaWAN protocols through gateways to build low-power wide-area networks 8. Supports LoRa, (G)FSK, and LR-FHSS modulation, compatible with SX126X/SX127X frequency bands for seamless product upgrades 9. Integrated AES-128 encryption engine for enhanced data security; onboard TCXO crystal ensures frequency stability under high/low-temperature conditions 10. Suitable for IoT applications including industrial telemetry, smart homes, environmental monitoring, and remote data acquisition 11. Includes C language sample programs and user manuals for streamlined development and rapid deployment 12. Operating frequency bands: LF: 410MHz to 510MHz; HF: 850MHz to 930MHzSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs40HQ: 1137 cartons * 96 pcs = 109152 pcs
£15.99 - £16.99
-
Type-C Power And Signal Splitter CNC Aluminum Alloy Case With Indicator, Waveshare 33502
1. A dedicated module for separating the power and data signals on the USB-C interface, which can effectively prevent the computer from reverse power supply and improve the stability of device power supply2. Suitable for various application scenarios such as PiKVM, Raspberry Pi, industrial control, and high-power USB peripherals3. It can provide stable power to the device through an external 5V power supply while maintaining USB communication with the computer or host4. Made of aluminum alloy, it is sturdy and durable5. Interface type: USB Type-C female port x 36. Input power: 5V DC7. Signal channel: USB 2.08. Indicator light: power status indicator9. Shell material: CNC aluminum alloy10. Size: about 3.3 x 2.8 x 1.15 cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch Qty per Carton 890 Carton Weight 28.00kgs / 61.73lb Carton Size 47cm * 38cm * 35cm / 18.5inch * 14.96inch * 13.78inch Loading Container 20GP: 426 cartons * 890 pcs = 379140 pcs40HQ: 990 cartons * 890 pcs = 881100 pcs
£6.99
-
Waveshare ESP32-S3 4.2 Inch RLCD Full Reflective Display Development Board Supports Wi-Fi & BLE Dual-Mode Communication Without Battery, 33507
1. Features a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed up to 240MHz2. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE) with built-in antennas3. Includes 512KB SRAM and 384KB ROM, while stack-integrated with 16MB Flash and 8MB PSRAM4. Features a 4.2-inch full-reflective display with 300 x 400 resolution, offering reflective imaging and eliminating the need for backlighting5. Equipped with a dual-microphone array enabling audio algorithms like noise reduction and echo cancellation, ideal for precise voice recognition and near-field/far-field voice wake-up applications6. Onboard PCF85063 RTC real-time clock and SHTC3 temperature/humidity sensor for precise RTC time management and environmental monitoring7. Integrated 18650 lithium battery holder and RTC backup battery holder (requires rechargeable RTC battery), supporting dual-mode operation: main power supply and independent RTC backup8. Onboard Micro SD card slot for external storage of images or files9. Two customizable side buttons (KEY and BOOT) for developing user-defined functions10. Reserved 2 x 8-row female header (2.54mm pitch) for external expansionSpecifications1. Display panel: fully reflective screen2. Display size: 4.2 inches3. Display resolution: 300 x 4004. Gray scale levels: 25. Communication interface: SPI6. Display method: fully reflective7. Driver IC: ST73058. Display colors: black, white9. Size: about 9.25 x 6.91 cmPackaging list:- ESP32-S3-RLCD-4.2-EN host x 1- Acrylic stand x 2- 8-ohm 2W MX1.25 2PIN speaker (forward) 80mm x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 14cm * 11cm * 4cm / 5.51inch * 4.33inch * 1.57inch Qty per Carton 60 Carton Weight 12.00kgs / 26.46lb Carton Size 44cm * 37cm * 35cm / 17.32inch * 14.57inch * 13.78inch Loading Container 20GP: 468 cartons * 60 pcs = 28080 pcs40HQ: 1086 cartons * 60 pcs = 65160 pcs
£24.99
-
Waveshare 2-Ch GMSL Camera Adapter Board Equipped With MAX9296A Deserializer High-Speed And Low-Latency Serial Transmission, Waveshare 33623
1. Deserializer: MAXIM (ADI) MAX9296A2. Supported hosts: Raspberry Pi 5, Jetson Orin NX/Nano development kits3. Supported serializer models: MAX9295, MAX96717, MAX96705, etc.4. GMSL input: 2 x GMSL2 (GMSL1 compatible) cameras5. Input interface: 2 x MATE_AX FAKRA Z connectors6. Output interface: 22-pin CSI interface7. Supported GMSL camera models: ISX031, etc.8. Power supply: 5V inputPackage contents:- MAX9296-GMSL-DESER-MODULE x 1- 22-pin FFC cable (about 100mm) x 2- PH2.0 3-pin connector cable x 1- Screw kit x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 14cm * 12cm * 4cm / 5.51inch * 4.72inch * 1.57inch Qty per Carton 72 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 72 pcs = 33624 pcs40HQ: 1086 cartons * 72 pcs = 78192 pcs
£88.99
-
For VisionFive2 Lite Aluminum Alloy Cooling Case With Fan & Camera Mount, Waveshare 33490
1. Aluminum alloy construction for durability and strength2. Equipped with heat dissipation fins and fans, providing excellent heat dissipation performance3. Features camera mount compatible with IMX219 camera module4. Simple installation recommended under professional guidance or at service center5. Size: about 9.05 x 6.2 x 3.135 cmPackage contents:- VisionFive2 Lite case (top and bottom covers) x 1- 3007 5V cooling fan x 1- Heat sinks x 3- Screw set x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 54 Carton Weight 8.00kgs / 17.64lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 54 pcs = 26892 pcs40HQ: 1157 cartons * 54 pcs = 62478 pcs
£10.99
-
WAVESHARE Industrial USB To TTL Converter, Original FT232RNL, Multi Protection & Systems Support, 17939
1. Utilizing the original FT232RNL chip, it offers better stability and compatibility, enabling seamless industrial-grade high-performance communication between computers and TTL devices2. Three data indicator lights, allowing easy observation of the working status, facilitating programming and debugging for you3. Host interface: USB4. Communication rate: 300bps - 3Mbps5. Device interface: UART6. USB interface: Interface type: USB-A type interface; Interface protection: self-recovery fuse, ESD static protection7. UART interface: Interface form: terminal block; Interface form: 8PIN anti-blocking interface; Interface protection: IO protection diode circuit8. Indicator lights: PWR: power indicator light, turns on when connected to USB and detects voltage; TXD: transmit indicator light, turns on when data is sent from the USB port; RXD: receive indicator light, turns on when data is sent back from the device interface9. Note: this product does not come with a USB cable. This module is a USB-to-TTL level converter. Do not directly connect to RS232 level to avoid damaging the moduleSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 305 Carton Weight 26.00kgs / 57.32lb Carton Size 42cm * 37cm * 35cm / 16.54inch * 14.57inch * 13.78inch Loading Container 20GP: 490 cartons * 305 pcs = 149450 pcs40HQ: 1138 cartons * 305 pcs = 347090 pcs
£6.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6-POE-ETH Development Board Supports Power Over Ethernet (PoE), Package D
1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, providing stable connection and efficient transmission.11. Integrated PoE module makes the development board's power supply more flexible.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve networking and power supply.13. Uses an IPS full-laminated tempered glass panel with a 178-degree wide viewing angle, supports ten-point touch, and provides a clear picture and excellent visual experience.14. Dimensions: 55x68mmRaspberry Pi camera type B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focus1. Screen model: 10.1-DSI-TOUCH-A2. Resolution: 800 x 1280 (H x V)3. Communication interface: MIPI-DSI (2-lane)4. Brightness: 400cd/m25. Touch chip: GT92716. Dimensions: 147.0 × 239.0 (mm)7. Display size: 135.36 × 216.58 (mm)8. Pixel size: 0.1692 (H) × 0.1692 (V) (mm)9. Contrast ratio: 800:1Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- 10.1-inch display x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- RPi camera (B) x 1- FFC cable - 15-pin ribbon cable x 1- MIPI-DSI cable 12cm x 1- MX 1.25 2-pin to 2.54 3-pin connector cable x 1- FFC cable 22-pin 200mm (reverse direction) x 2- MX1.25 2-pin to MX1.25 4-pin cable approximately 150mm x 1- MX1.25 2-pin to SH1.0 2-pin connector cable approximately 80mm x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable approximately 1 meter x 1- Copper standoffs pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 23cm * 16cm * 7cm / 9.06inch * 6.3inch * 2.76inch Qty per Carton 16 Carton Weight 9.10kgs / 20.06lb Carton Size 48cm * 34cm * 30cm / 18.9inch * 13.39inch * 11.81inch Loading Container 20GP: 544 cartons * 16 pcs = 8704 pcs40HQ: 1264 cartons * 16 pcs = 20224 pcs
£83.99
-
WAVESHARE WAVESHARE 5G / 4G / 3G Module, Includes RM520N-GL Module, Supports 5G NSA And SA Networking, GNSS Positioning, 32256
1. 5G standard: 3GPP Release 162. Chipset solution: Qualcomm Snapdragon X623. LTE: 1.6Gbps (DL) / 200Mbps (UL)4. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)5. Size: about 10 x 7.9cmFeatures:1. Based on Qualcomm platform, supports 5G NSA and SA networking, with multi-mode and multi-band capabilities2. Integrated dual-frequency positioning across multiple satellite constellations: GPS, GLONASS, BeiDou, Galileo, and QZSS3. Onboard USB 3.1 interface, backward compatible with USB 2.0, enabling high-speed 5G connectivity when connected to Jetson Orin motherboards, computers, or Raspberry Pi4. Onboard M.2 B KEY standard interface with pin configuration switch5. Onboard 4x SMA-to-IPEX antenna conversion ports for simplified antenna installation6. Reserved UART solder pad interface for data transmission with select modules7. Onboard 1 Nano SIM card slot and 1 eSIM slot packaged as QFN-8 (5 x 6), supporting dual-SIM single-standby with AT command switching8. Onboard power switch, reset button, and LED indicator for module power control and status monitoring9. Onboard high-efficiency power circuit capable of delivering up to 3A currentPackage list:- Expansion board x 1- Module x 1- 5G antennas x 4- SMA dust caps x 5- 13cm IPEX1 to IPEX4 cables x 2- 5cm IPEX1 to IPEX4 cables x 2- Screw set x 1- GPS antenna x 1- Dual-ended USB cable x 1- Heat sink x 1- USB 3.0 adapter x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 18cm * 12cm * 4cm / 7.09inch * 4.72inch * 1.57inch Qty per Carton 60 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 60 pcs = 24720 pcs40HQ: 958 cartons * 60 pcs = 57480 pcs
£246.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6-POE-ETH Development Board Supports Power Over Ethernet (PoE), Package C
1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module provides more flexible power supply options for the development board.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve both networking and power supply.13. Dimensions: 55x68mmRaspberry Pi camera module B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focusPackage contents:ESP32-P4-WIFI6-POE-ETH x 1SH1.0 4PIN connecting cable (approx. 150mm) x 21217 cavity speaker 8Ω 2W x 12.4G antenna x 1RPi camera (B) x 1FFC 15PIN ribbon cable x 1Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs
£35.99
-
WAVESHARE WAVESHARE ESP32-P4-WIFI6-POE-ETH Development Board Supports Power Over Ethernet (PoE), Basic Package
1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module, making the development board's power supply more flexible.12. Only one network cable is needed to connect to a PoE device, enabling both networking and power supply for the ESP32-P4-WIFI6-POE-ETH.13. Dimensions: 55x68mm14. Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs
£24.99
-
Waveshare Waveshare SIM7600G-H-M.2 4G Module for Jetson Orin Supports 4G / 3G / 2G Communication And GNSS Positioning, Global Coverage, 32257
1. Supports functions including dial-up internet access, voice calls, SMS, TCP, UDP, MQTT, HTTP(S) and FTP(S) 2. Supports GPS, Beidou, GLONASS, GALILEO, QZSS and LBS base station positioning 3. On-board USB 3.1 interface, backward compatible with USB 2.0, which can be connected to Jetson Orin motherboard, computer or Raspberry Pi for high-speed 4G internet access 4. On-board M.2 B KEY standard interface and pin setting switch, compatible with optional SIM8260X-M2/SIM8262X-M2 / RM5XX / SIM7600 series modules 5. On-board 4-channel SMA to IPEX antenna conversion interfaces, enabling more convenient antenna installation 6. Reserved UART pad interface, which facilitates data transmission and other functions with certain modules via this interface 7. On-board audio interface and audio decoding chip, applicable for voice operations like making calls with SIMXXX series modules 8. On-board power switch, reset button and LED indicator, making it easy to control the module's on/off status and check its operating condition 9. On-board high-efficiency power circuit, capable of outputting up to 3A current Specifications: 1. Chip Solution: Qualcomm MDM9607 2. Module Dimensions: 42 x 31.4 x 3.8mm 3. Operating Frequency Bands: --LTE-FDD: B1,B2,B3,B4,B5,B7, B8,B12,B13,B18,B19, B20,B25,B26,B28, B66 --LTE-TDD: B34,B38,B39,B40, B41 --WCDMA: B1,B2,B4,B5,B6,B8, B19 4. Data Transmission Rate: LTE 150Mbps (DL, Downlink) / 50Mbps (UL, Uplink)Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 48 Carton Weight 13.10kgs / 28.88lb Carton Size 30cm * 42cm * 38cm / 11.81inch * 16.54inch * 14.96inch Loading Container 20GP: 556 cartons * 48 pcs = 26688 pcs40HQ: 1292 cartons * 48 pcs = 62016 pcs
£70.99
-
WAVESHARE WAVESHARE ESP32-S3 Development Board Equipped With 3.49 Inch IPS Capacitive Touchscreen, Model A With Battery, Model A Without Battery, Model B With Battery, Model B Without Battery
LCD screen parameters:1. Display panel: LCD2. Display size: 3.49 inches3. Display resolution: 172 x 6404. Display colors: 16.7M5. Display brightness: 350 cd/m26. Contrast ratio: 1200:17. Display Interface: QSPI8. Driver chip: AXS15231B9. Touch interface: I2C10. Touch type: capacitive sensing11. Size: model A about 9.269 x 3.48 x 3.18cm, model B about 9.269 x 3.48 x 2.28cmFeatures:1. Powered by ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, clocked up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Incorporates 512KB SRAM and 384KB ROM, with 8MB PSRAM stacked and external 16MB Flash4. Onboard 3.49-inch capacitive touch HD IPS display, 172 × 640 resolution, 16.7M colors, clearly displays color images5. Equipped with dual microphone array, enabling audio algorithms like noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications6. Integrated AXS15231B display driver IC communicating via QSPI and I2C interfaces7. Onboard QMI8658 six-axis IMU (3-axis accelerometer, 3-axis gyroscope) for detecting device orientation and step counting8. On-board PCF85063 RTC chip for convenient implementation of real-time clock functionality9. Two customizable side buttons (PWR, BOOT) for developing user-defined functions10. On-board 3.7V MX1.25 lithium battery charge/discharge interface or 18650 battery holder11. Onboard Micro SD card slot for flexible storage expansion and rapid data transfer, suitable for data logging and media playback, simplifying circuit design12. Reserved 22-pin 2.54mm pitch through-hole pads for connecting external modules or functional expansion, enhancing development flexibilitySpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 28.00kgs / 61.73lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs40HQ: 958 cartons * 90 pcs = 86220 pcs
£30.99 - £32.99
-
WAVESHARE WAVESHARE High-Precision High-Torque 360-Degree Magnetic Encoder Serial Bus Servo Motor, 22414
1. Stall torque: 30kg.cm @ 12V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 6V ~ 12.6V6. Gear type: high-precision metal gears7. No-load speed: 0.222 sec / 60 degrees (45 RPM) @ 12V 0.192 sec /8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, Load, Speed, and12. Input voltage13. No-load current: 180mA14. Stall current: 2.7A15. Kt constant: 11kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build quadruped, hexapod, robotic arm, and other robot projects requiring multiple servos (this product provides the open-source structural model of the robot dog shown in the figure below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoder angle sensor. Compared to potentiometers, the angle is increased to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servo's lifespan.20. Acceleration start/stop function: speed and acceleration values ??can be set for smoother motion.21. The shell uses a higher-strength engineering plastic shell and a dual-axis low-profile shell structure design, optimizing the distance between the planes where the dual-axis servo discs are located, making the overall structure more compact and the product appearance more aesthetically pleasing.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs
£19.99
-
WAVESHARE WAVESHARE High-Precision High-Torque 360-Degree Magnetic Encoder Serial Bus Servo Motor, 33014
1. Stall torque: 19.5 kg.cm @ 7.4V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 4V ~ 7.4V6. Gear type: high-precision metal gears7. No-load speed: 0.192 sec / 60 degrees (52 RPM) @ 7.4V8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, load, speed, and12. Input voltage13. No-load current: 150mA14. Stall current: 2.5A15. Kt constant: 7.8 kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build robotic projects requiring multiple servos, such as quadruped robots, hexapod robots, and robotic arms (this product provides the open-source structural model of the robot dog shown in the image below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoding angle sensor. Compared to potentiometers, the angle range is extended to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servos lifespan.20. Acceleration start/stop function: allows setting speed and acceleration values ??for smoother motion.21. The casing uses a higher-strength engineering plastic shell and a dual-axis low-profile structure design, optimizing the spacing between the planes where the dual-axis servo horns are located, resulting in a more compact overall structure and a more aesthetically pleasing appearance.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs
£17.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Microcontroller Development Board Features 1.46-Inch Round Touchscreen Display, 32868
1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs
£21.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Microcontroller Development Board Features 1.46-Inch Round Touchscreen Display, 32867
1. Features a 1.46-inch capacitive high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), Micro SD card slot, and other peripherals for easy development and integration into products.2. Uses the Raspberry Pi-designed RP2350B microcontroller chip.3. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.4. Built-in 520KB of SRAM and 16MB of on-chip Flash.5. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.6. On-board 1.46-inch LCD screen with a resolution of 412 x 412 and 65K colors.7. Supports I2C interface control for capacitive touch, 5-point touch, and interrupt support.8. On-board 3.7V MX1.25 lithium battery charging and discharging interface.9. USB 1.1 host and device support.10. Supports low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. 14 multi-functional GPIO pins.13. 2 I2C interfaces, 2 UART interfaces, 7 12-bit ADCs, and 12 controllable PWM channels.14. Accurate on-chip clock and timers, built-in temperature sensor for real-time monitoring of chip temperature.15. 12 programmable I/O (PIO) state machines for custom peripheral support.16. Gentle touch for intuitive operation and flexible multi-point UI interaction; touch functionality is provided via I2C signals, supporting 5-point touch.17. On-board audio codec chip supports high-quality audio processing, providing clear and high-quality audio input and output.18. Multiple interfaces are provided for easy expansion and development, offering greater flexibility.19. Interfaces: UART, I2C, USBSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs
£23.99
-
WAVESHARE WAVESHARE CAN FD / ETH Bidirectional Protocol Converter Compatible With CAN 2.0A/2.0B, 32598
1. The CAN FD TO ETH is a DIN rail-mounted CAN FD to Ethernet device, featuring high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and Ethernet devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design for stable operation and supports a wide voltage range of 9V to 36V. The arbitration domain baud rate is 5Kbps to 1Mbps, and the data domain baud rate is 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 76.1 (mm)6. Installation method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicators: POWER, WORK, NET, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps;11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in 2 CAN bus 120-ohm termination resistors. The resistors are connected via DIP switches. Setting any one DIP switch to ON connects one 120-ohm resistor; setting both DIP switches to ON connects two 120-ohm resistors in parallel.13. Network port specifications: RJ45, 10/100Mbps, auto-negotiation for crossover/straight-through cables14. Network protocols: TCP server, TCP client, UDP server, and UDP client15. Modbus gateway: CAN FD to ModbusTCP (Master/Slave)16. Transmit messages: supports configuring up to 64 transmit messages17. Receive messages: supports configuring up to... 64 received messages18. Conversion modes: transparent conversion, Transparent conversion with ID, Standard conversion, Modbus conversion, and Custom frame header and footer conversion19. CAN ID: supports standard frames and extended frames20. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)21. Packet frame number and time: supports custom packet frame number and custom packet time22. Conversion direction: supports bidirectional conversion, Ethernet to CAN only, and CAN to Ethernet only23. Firmware upgrade: supports firmware upgrade via PC software24. Parameter configuration: AT commands, PC software configuration25. Other functions: supports heartbeat packets, registration packets, normal, loopback, and listen-only operating modes26. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV27. Electrical fast transient/burst: power supply circuit 2KV, Ethernet and CAN port circuits 1KV28. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV, CAN circuit common mode 2KV, Ethernet circuit 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs40HQ: 1083 cartons * 54 pcs = 58482 pcs
£33.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Development Board 480 X 480 Resolution, With Touch Screen
1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB of SRAM and 16MB of on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Programs can be downloaded via drag-and-drop by recognizing the device as a mass storage device via USB.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of terminal blocks, allowing for bottom or back wiring, facilitating integration into various applications such as rail mounting or embedded systems.16. Capacitive 5-point touch: Light touch for intuitive operation and multi-point UI interaction; touch functionality can be accessed via I2C signals, supporting 5-point touch.17. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs40HQ: 1130 cartons * 96 pcs = 108480 pcs
£30.99
-
WAVESHARE WAVESHARE RP2350 High-Performance Development Board 480 X 480 Resolution, Without Touch Screen
1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating concerns about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of wiring terminals, allowing for bottom or back wiring options, facilitating integration into various applications such as rail mounting or embedded systems.16. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs40HQ: 1130 cartons * 96 pcs = 108480 pcs
£24.99
-
WAVESHARE WAVESHARE Raspberry Pi Original Pi5 PCIe to M.2 Interface Expansion Board Compact Version
1. This product features a compact layout design, allowing space for the built-in cooling fan of the Raspberry Pi 5 official case when connecting a 2230 size M-key M.2 peripheral to the Raspberry Pi 5.2. Supports NVMe protocol M.2 interface hard drives, offering high-speed reading and writing for high work efficiency.3. PCI-E ×1 Gen2 or Gen3 mode.4. Only supports Raspberry Pi 5B and 2230 size M.2 hard drives.5. Onboard work indicator lights: PWR is always on when powered, ACT flashes during reading and writing, providing a clear indication of the working status.6. HAT+ design with onboard EEPROM chip.7. Extends the single-channel PCIe 2.0 interface of the Raspberry Pi 5 (speed approximately 500MB/s).8. Supports M.2 M-key devices, only supporting 2230 size M.2 hard drives.9. Provides 3A current to the connected M.2 hard drive.10. Complies with Raspberry Pi HAT+ specifications and can be automatically detected via firmware.11. Compact layout design allows installation between the Raspberry Pi USB ports and the built-in cooling fan and case cover, improving compatibility with the Raspberry Pi 5 official case.12. Onboard LED indicators for power and ACT status.13. Designed specifically for stacking with the built-in cooling fan of the Raspberry Pi 5 official case.14. Dimensions: 65x56.5mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 192 Carton Weight 14.60kgs / 32.19lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 192 pcs = 88512 pcs40HQ: 1071 cartons * 192 pcs = 205632 pcs
£21.99
Has visto 48 de 251 productos