Productos

1. Body material: 304 stainless steel2. Bit specification: Compatible with 4mm inner hexagon and 800 bit3. Manual torque: 20kgf.cm4. Electronic torque: 1.6kgf.cm5. Idling speed: 470rpm6. Battery capacity: 800mAh7. Working voltage: 3-5V8. Working time: about 6 hours (without load)9. Charging mode: Type-C/USB-C 5V input10. Charging time: about 50 minutes11. Dimensions (excluding bits): about 19mm in diameter, about 146mm in length12. Host weight: about 120gFeatures:1. Intelligent somatosensory recognition and orientation mode: ES15 can be set to different working modes of intelligent somatosensory recognition and directional mode (forward rotation, reverse rotation); somatosensory recognition is suitable for quick maintenance, and directional mode is used for heavy disassembly tasks2. Impact function: The impact function can ensure that each screw goes deep into place3. Battery management: Intelligent battery management system manages battery power reasonably and prolongs battery life4. Adjustable sensitivity: You can adjust the somatosensory recognition sensitivity and speed according to your usage habits5. Anti-seize function: It is specially designed for hexagon socket screws to prevent the bit from being stuck, allowing you to operate freely6. Universal multi-standard bits: compatible with 4mm hexagon socket and 800 bits, adapting to more usage scenarios7. Upgrade the power module: use a hollow cup motor, cooperate with a planetary gear and a two-way overrunning clutch to provide sufficient power8. Front lighting: front shadowless lighting, illuminate the working position, more comfortable to use9. Two ways: you can use the electric mode, and you can also tighten/loosen the screws manually10. SET button: quick menu setting and combined unlocking11. Firmware upgrade function: Run e-Designs self-developed DFU software, self-upgrade and optimize experiencePackage includes:Electric host x 1Steel bits x 24Manual x 1Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 18cm * 9cm * 5cm / 7.09inch * 3.54inch * 1.97inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs

Leer Más Menos

1. Reduced height, not easy to dump more stable, more flexible desoldering operations2. Adopt fan blowing + air conduction heat dissipation, better results3. Control terminal and heating body can be separated, direct plug and replace, flexible and convenient4. Color-changing light, the light color changes with the temperature of the heater, so you can see at a glance whether it is warm or cold5. Can set the heating temperature and time in sections, simulating the function of reflow oven, intelligent temperature control, accurate heating6. Clear interface, rich display, key front, convenient operation7. Dual-mode power supply input, DC, PD are good to use8. When detecting the equipment tilt angle is too large, the controller will immediately stop heating, to ensure safety9. Embedded e-Design firmware, optimized software DFU, better experienceParameters:1. Material: A5: aluminum alloy; B5: copper body plated with nano-ceramic coating2. Screen: color LCD (160 x 80 resolution)3. Heating area: 50 x 50mm4. Temperature range: 100-350 degrees celsius5. Temperature stability: +/- 3 percent6. Power supply interface: USB Type-C; DC55257. Input voltage: DC 19-24V; PD 20V (two power supply ports can not be used at the same time)8. Power: DC5525 150W; PD 100W9. Size: console: 71.5 x 55.5 x 22.5mm; heater: 50 x 50 x 29mm10. Weight:- A5: console: 78g; heater: 60g- B5: console: 78g; heater: 87gSpecification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 11cm * 11cm * 8cm / 4.33inch * 4.33inch * 3.15inch Qty per Carton 20 Carton Weight 8.00kgs / 17.64lb Carton Size 44cm * 31cm * 22cm / 17.32inch * 12.2inch * 8.66inch Loading Container 20GP: 888 cartons * 20 pcs = 17760 pcs40HQ: 2062 cartons * 20 pcs = 41240 pcs

Leer Más Menos

1. Interface: Type-C/USB-C2. Supply mode: DC+PD3. Working voltage and power range: DC 9-24V (up to 9-65W), PD 9V-28V (up to 9-90W)4. Temperature control range: 50-400 degrees Celsius5. Display: 128×32 pixels OLED6. Length: the control end is about 98 mm, and the soldering iron tip is about 105 mm7. Weight: about 33g (control terminal + soldering iron tip)Features:1. DC and PD dual power input, rapid tin, a variety of power supply to meet a variety of use scenarios2. Fast heating speed, one key to raise the temperature, Boost powerful mode, large energy to help welding3. Dynamic soldering iron head detection, real-time detection of the circuit, to prevent direct burnout control side4. Easy to use and portable, compact size, 168mm long compact pen shape, easy to disassemble, does not occupy space5. Stainless steel ball screw, stable soldering iron head, free from tedious screwing6. Function: auto-sleep, auto-rest, auto-frequency; auto-off screen, timely monitoring of the status of the soldering head, to avoid short-circuit protection control handle, so that the welding project more time-savingPackage includes:Soldering iron tip x1User manual x1Type-C/USB-C silicone cable (data transmission and power supply) x1Soldering iron console x1Non-slip sleeve x1Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 15cm * 8cm * 4cm / 5.91inch * 3.15inch * 1.57inch Qty per Carton 224 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 224 pcs = 39648 pcs40HQ: 412 cartons * 224 pcs = 92288 pcs

Leer Más Menos