Productos
-
DJI Protector de hélice de 360 grados original para DJI Mini 4 Pro, protector de hélice para Mini 4 Pro
1. El protector de hélice de 360 grados, liviano, rodea completamente las hélices para evitar lesiones o daños y mejorar la seguridad del vuelo. Es especialmente útil para principiantes que vuelan en interiores o en lugares con numerosos obstáculos. Presupuesto: 1. Peso (un lado): 42 gramos 2. Radio: 97 mm 3. Dimensiones (después de la instalación): 411,6 × 335 × 115 mm (largo × ancho × alto) 4. Compatibilidad: DJI Mini 4 Pro Consejos: 1. Antes de instalar el protector de hélice en el DJI Mini 4 Pro, asegúrese de que el firmware de la aeronave se haya actualizado a la versión v01.00.0100 o posterior. De lo contrario, no se puede garantizar la estabilidad del vuelo. 2. DJI Mini 4 Pro no es compatible con la función de evasión de obstáculos después de instalar el protector de la hélice y no puede desviarse ni frenar de forma activa cuando detecta un obstáculo. Al utilizar funciones inteligentes, la aeronave no tendrá la capacidad de evadir obstáculos. 3. La aeronave pesará más de 250 g después de instalar el protector de la hélice. Siempre verifique cuidadosamente y respete las leyes y regulaciones locales. Si es necesario, obtenga la aprobación y autorización necesarias de las agencias gubernamentales pertinentes antes de volar. 4. No utilice la batería de vuelo inteligente Plus después de instalar el protector de la hélice. De lo contrario, el peso sobrecargará la capacidad del dron y no se podrá garantizar la seguridad del vuelo. Especificación: Peso del paquete Peso de un paquete 0,46 kg/1,01 lb Un tamaño de paquete 36 cm x 32 cm x 9 cm (14,17 pulgadas x 12,6 pulgadas x 3,54 pulgadas) Cantidad por caja 5 Peso de la caja 2,28 kg/5,03 lb Tamaño de la caja 38 cm * 34 cm * 47 cm/14,96 pulgadas * 13,39 pulgadas * 18,5 pulgadas Contenedor de carga 20GP: 439 cajas * 5 uds. = 2195 uds. 40HQ: 1019 cajas * 5 piezas = 5095 piezas
£16.99
-
DJI Cargador de batería y adaptador de corriente original DJI Mavic Air 2/2S de 38 W
1. Con múltiples modos de salida, tiene un puerto de carga de batería, puerto USB-A, que puede cargar la batería y el control remoto al mismo tiempo, y también puede servir como fuente de energía para otros dispositivos externos. 2. Potencia de salida de carga total de hasta 38 W 3. Múltiples puertos de salida y modos de salida 4. Entrada: 100-240 V; 50-60 Hz 5. Salida: 13,2+/-0,1 V o 12,6+/-0,1 V 6. Interfaz USB: 5 V, 2 A 7. Tiempo de carga de la batería: aprox. 1 hora y 35 minutos (varía ligeramente según la temperatura ambiente) 8. Tiempo de carga del control remoto: aprox. 4 horas (varía ligeramente según la temperatura ambiente) 9. Productos compatibles: para Mavic Air 2/2S Especificación: General Compatible con DJI: Aire 2S Peso del paquete Peso de un paquete 0,25 kg/0,56 lb Un tamaño de paquete 15 cm x 8 cm x 5 cm (5,91 pulgadas x 3,15 pulgadas x 1,97 pulgadas) Cantidad por caja 146 Peso de la caja 30,00 kg/66,14 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 146 uds. = 25842 uds. 40HQ: 412 cajas * 146 piezas = 60152 piezas
£28.99
-
DJI Original Accessories Pack Intelligent Battery+Charging Manager for DJI Avata
1. Built-in intelligent battery management system, real-time monitoring and feedback of battery status, full of energy, intelligent guardian2. Charging manager can charge 4 batteries in sequence at the same time3. Battery capacity: 2420 mAh4. Nominal voltage: 14.76V5. Charging limit voltage: 17V6. Battery type: Li-ion7. Energy: 35.71 watt-hours8. Discharge multiplier: 7C typical9. Charging manager recommended charger: DJI 65W portable charger or other chargers supporting USB PD fast charging protocol10. Charge manager input: 5-20V, up to 5A11. Charge manager output: 17V12. Ambient temperature: 5-40 degrees Celsius13. Adapted products: for DJI Avata14. Packing list: battery x 2, charging manager x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 21cm * 10cm * 10cm / 8.27inch * 3.94inch * 3.94inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs
£244.99
-
DJI Cable de conexión para cámara DJI Mic original, cable de conexión para cámara
1. Buen contacto, sin demoras, duradero. 2. Conecte el conector de audio de 3,5 mm al puerto de salida del receptor de micrófono DJI para la transmisión de la señal de audio 3. Nota: no conectar a dispositivos con salida externa de 24/48 V. 4. Productos adaptables: DJI Mic 5. Lista de embalaje: cable de audio x 1 6. Peso: aproximadamente 10 g. Especificación: Peso del paquete Peso de un paquete 0,03 kg/0,07 lb Un tamaño de paquete 8 cm x 6 cm x 2 cm (3,15 pulgadas x 2,36 pulgadas x 0,79 pulgadas) Cantidad por caja 500 Peso de la caja 15,00 kg/33,07 lb Tamaño de la caja 30 cm x 50 cm x 40 cm (11,81 pulgadas x 19,69 pulgadas x 15,75 pulgadas) Contenedor de carga 20GP: 444 cajas * 500 piezas = 222000 piezas 40HQ: 1031 cajas * 500 piezas = 515500 piezas
£8.99
-
DJI Original Cellular Dongle LTE USB Modem For DJI
Cellular Module:1. You can connect your equipment to 4G network for networking, enhanced map transmission, network RTK and many other functions. This module provides you with high-speed and stable networking services and supports most 4G bands worldwide2. This product does not include a SIM card3. When using the enhanced map transmission, please make sure to operate the drone in a place where the remote control or cell phone 4G signal is near full.4. Compatible products: for Mavic 3 Classic/Mavic 3/Mavic 3 Cine/RC Pro/Mavic 3 Module installation kit:1. Use with Cellular module to securely mount on Mini 3 Pro.2. When using with the RC-N1 remote control, make sure the phone connected to the remote control is connected to the 4G network.3. When using with RC, make sure RC is connected to 4G network by connecting to Wi-Fi hotspot of cell phone.4. Applicable products: For Mini 3 ProCountries where the service is available: Chinese Mainland, Austria, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom.Specification: Package Weight One Package Weight 0.52kgs / 1.14lb One Package Size 23cm * 17cm * 6cm / 9.06inch * 6.69inch * 2.36inch Qty per Carton 20 Carton Weight 11.30kgs / 24.91lb Carton Size 48cm * 36cm * 32cm / 18.9inch * 14.17inch * 12.6inch Loading Container 20GP: 482 cartons * 20 pcs = 9640 pcs40HQ: 1119 cartons * 20 pcs = 22380 pcs
£115.99
-
DJI Cargador de escritorio DJI original de 100 W con dos interfaces de salida USB-C, cargador de escritorio de 100 W
1. Con dos puertos de salida USB-C, puede cargar rápidamente la batería y el control remoto al mismo tiempo. También es compatible con los protocolos de carga rápida PPS y PD, y puede cargar rápidamente dispositivos móviles con interfaz USB-C. 2. Voltaje de entrada: 100 V a 240 V (CA), 50 Hz a 60 Hz, 2,5 A 3. Potencia de salida: 100 vatios. Cuando se utilizan simultáneamente, la potencia de salida de uno de los puertos es de 82 vatios (MÁXIMO), y el cargador distribuirá dinámicamente la potencia de salida de ambos puertos según la potencia de carga. 4. 4. Temperatura ambiente de funcionamiento: 5- 40 grados Celsius 5. Tiempo de carga: -Para la batería de vuelo inteligente DJI Mavic 3: aproximadamente 1 hora y 10 minutos -Para el control remoto DJI RC-N1: aproximadamente 2 horas y 40 minutos -Para control remoto DJI RC: aprox. 2 horas -Para el control remoto DJI RC Pro: aprox. 2 horas -Para el control remoto DJI RC Pro Industry Edition: aprox. 1 hora y 30 minutos -Para la batería de vuelo inteligente DJI Avata: aprox. 47 minutos -Para la batería de DJI Goggles 2: aprox. 1 hora y 50 minutos 6. Modelos compatibles: -Para DJI Mavic 3 Classic -Para DJI Mavic 3 -Para DJI Mavic 3 Cine -Para la serie industrial DJI Mavic 3 -Para DJI Avata -Para batería DJI Goggles 2 7. Nota: Cuando se cargan dos puertos de carga al mismo tiempo, el tiempo de carga se prolongará ligeramente, tenga paciencia. El tiempo de carga se mide en un entorno experimental y solo se utiliza como referencia. Especificación: General Compatible con DJI: Avata , Mavic 3 , Gafas 2 Peso del paquete Peso de un paquete 0,42 kg/0,93 lb Un tamaño de paquete 14 cm x 12 cm x 8 cm (5,51 pulgadas x 4,72 pulgadas x 3,15 pulgadas) Cantidad por caja 356 Peso de la caja 149,16 kg/328,85 lb Tamaño de la caja 50 cm * 50 cm * 60 cm / 19,69 pulgadas * 19,69 pulgadas * 23,62 pulgadas Contenedor de carga 20GP: 177 cajas * 356 piezas = 63012 piezas 40HQ: 412 cajas * 356 piezas = 146672 piezas
£49.99
-
Mira Sales Original DJI RC Motion 2 For Avata / Goggles 2 / Goggles Integra / FPV Goggles V2, Original DJI RC Motion 2
1. Powerful performance, easy to start, providing convenient and sensitive flight control, quickly master the joy of body control2. Immersive physical control: with the help of physical technology, you can control the flight direction by slightly turning your wrist3. Feature-rich and easy to use: streamlined handle design, comfortable grip4. Integrated throttle trigger, gear switching, one key emergency stop and many other functional buttons, a finger that can be reached, one-handed control5. A few simple steps, you can easily achieve takeoff and landing, acceleration, steering, backward flight, panning and other actions6. Multi-dimensional flexible control: increase the rocker, flight height and direction control more smoothly, more convenient take-off and landing7. Throttle trigger with backward function, in complex scenes after braking the aircraft, no need to turn around, you can return to the original way backward8. Parameter dial can quickly adjust ISO, shutter and other camera parameters, no longer need to lift the hand in the flight glasses to complete the parameter adjustment, one-handed control more comfortable9. Endurance: about 5h10. Packing list: DJI RC Motion 2 x 1, hand strap x 111. Compatible products: DJI Avata, Goggles 2, Goggles Integra, FPV Goggles V212. Weight: about 170gSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 18cm * 12cm * 8cm / 7.09inch * 4.72inch * 3.15inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs
£155.99
-
DJI Módulo de transmisión de imagen mejorada original DJI Air 3, módulo
1. Permite que los dispositivos DJI se conecten a redes 4G para realizar múltiples funciones, como redes, transmisión de imágenes mejorada y red RTK. 2. Realice la instalación integrada del módulo y del avión DJI Air 3. Puede insertar el módulo de transmisión de video mejorado directamente en el cuerpo del DJI Air 3 sin kits de instalación adicionales para acceder de manera eficiente a la red 4G. 3. Admite ASDIV (selección de antena de transmisión), con un mejor rendimiento y un mejor manejo de escenarios de vuelo complejos. Se incluye una eSIM para que pueda usarse sin una tarjeta adicional, y también se admiten tarjetas nano-SIM físicas. 4. El módulo de transmisión de imágenes mejorado puede conectar su equipo DJI a la red 4G, brindarle servicios de red estables y de alta velocidad y lograr una transmisión de imágenes mejorada, red RTK y otras funciones. 5. Sobre la base de la transmisión de imágenes originales, coopera con la red 4G. Si la señal de transmisión de imágenes originales se bloquea o interfiere, el usuario aún puede controlar el dron con la ayuda de la red 4G, lo que reduce la posibilidad de desconexión y mejora de manera efectiva la seguridad del vuelo. 6. Productos aplicables: para DJI Air 3S, DJI Air 3, DJI Mini 4 Pro, DJI Matrice 4T, DJI Matrice 4E, DJI Flip, DJI Airport 2, DJI Matrice 3D, DJI Matrice 3TD, DJI T60, DJI T25P, DJI RC Plus 2. 7. Países admitidos: Austria, Bulgaria, Croacia, República Checa, Dinamarca, Estonia, Finlandia, Francia, Alemania, Grecia, Hungría, Irlanda, Italia, Letonia, Liechtenstein, Lituania, Luxemburgo, Malta, Mónaco, Países Bajos, Noruega, Polonia, Portugal, Eslovaquia, Eslovenia, España, Suecia, Suiza, Reino Unido Lista de embalaje -1 x módulo de transmisión de vídeo mejorado -1 x destornillador -1 x clip de alambre Buenos consejos 1. Si eliges usar eSIM, sigue la (Guía de activación de eSIM) para activar la eSIM. Después de la activación, recibirás 3 GB de datos como regalo. Escanea el código QR para seguir la cuenta oficial según las indicaciones de la aplicación y realiza la recarga de datos, el recordatorio de datos y otros servicios. 2. Si decide utilizar una tarjeta SIM, comuníquese con su operador local para comprarla. 3. Cuando utilice la transmisión de vídeo mejorada, asegúrese de operar el dron en un lugar donde la señal 4G del control remoto o del teléfono móvil esté casi al máximo. Dado que la transmisión de imágenes mejoradas se realiza a través de la red 4G, puede haber un cierto retraso y desfase, así que asegúrese de volar con precaución. 4. Según la fecha de activación, el servicio de transmisión de imágenes mejorada debe renovarse después de un año y el precio de suscripción es de 99 yuanes al año. 5. DJI puede cancelar el servicio de transmisión de imágenes mejoradas en cualquier momento de conformidad con las leyes y regulaciones locales. La cancelación del servicio de transmisión de video mejorada no afecta a otras funciones de red del módulo de transmisión de video mejorada. 6. La transmisión de video mejorada solo se puede comprar y usar en China continental por el momento. Para otros países y regiones, preste atención al aviso oficial de DJI. Especificación: General Compatible con DJI: Aire 3S , Mini 4 Pro , Aire 3 Peso del paquete Peso de un paquete 0,04 kg/0,08 lb Un tamaño de paquete 17 cm x 10 cm x 6 cm (6,69 pulgadas x 3,94 pulgadas x 2,36 pulgadas) Cantidad por caja 60 Peso de la caja 1,92 kg/4,23 lb Tamaño de la caja 54 cm x 40 cm x 32 cm (21,26 pulgadas x 15,75 pulgadas x 12,6 pulgadas) Contenedor de carga 20GP: 385 cajas * 60 uds. = 23100 uds. 40HQ: 895 cajas * 60 piezas = 53700 piezas
£115.99
-
DJI Original Expansion Plate for DJI Ronin 4D, Use For SDI / XLR / TC Interfaces, Expansion Plate
1. Mounted on the back of the Ronin 4D, it is used to expand the timecode interface, SDI output interface and XLR audio input interface2. When using with the Ronin 4D transmitter, you need to install the Ronin 4D body expansion board first, and then install the Ronin 4D transmitter3. Easy to install, easy to use4. Packing list: fuselage expansion board x 15. Adaptable products: DJI Ronin 4D-6K, Ronin 4D-8KSpecification: General Compatible with DJI: Ronin 4D Package Weight One Package Weight 0.46kgs / 1.01lb One Package Size 15cm * 12cm * 6cm / 5.91inch * 4.72inch * 2.36inch Qty per Carton 66 Carton Weight 30.00kgs / 66.14lb Carton Size 60cm * 48cm * 24cm / 23.62inch * 18.9inch * 9.45inch Loading Container 20GP: 385 cartons * 66 pcs = 25410 pcs40HQ: 895 cartons * 66 pcs = 59070 pcs
£530.99
-
DJI Original External GPS Module Adapter Cable for DJI RS 3 Pro / RS 2
1. The module cable can connect the Ronin-S external GPS module to RS 2 / RS 3 Pro 2. Improve the stability of the gimbal during rapid acceleration, reduce the impact of acceleration on the sensor, and avoid image distortion 3. Compatible products: For DJI RS 3 Pro, DJI RS 2 4. Reminder: The Ronin-S external GPS module is not included in the module connection cable and needs to be purchased separately! Packing list: Module cable x 1Specification: General Compatible with DJI: RS 3 Pro, RS 2 Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 3cm * 2cm / 5.91inch * 1.18inch * 0.79inch Qty per Carton 500 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs
£32.99
-
DJI Original Fly More Kit Plus For DJI Mini 3 Pro Contains 3850 MAh Batteries/Propeller/Charging Hub, Fly More Kit Plus
1. Mini 3 Pro Fly More Kit Plus includes two Intelligent Flight Batteries Plus, a Two-Way Charging Hub, data cable, shoulder bag, spare propellers, and screws, providing comprehensive support for your aerial photography experience, at a better price than buying separately.2. With a 47-min max flight time(Measured at a constant speed of 21.6 kph in windless conditions. ), the Mini 3 Pro Intelligent Flight Battery Plus gives you more out of every flight.3. The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source.4. With the 30W USB-C Charger (sold separately), three Mini 3 Pro Intelligent Flight Batteries Plus can be fully charged in just four hours, greatly improving the charging efficiency.5. Propellers specially made for Mini 3 Pro produce less noise and have undergone precise dynamic balancing tests to provide higher aerodynamic efficiency and powerful thrust to the aircraft.6. Specially made for Mini 3 Pro, the shoulder bag provides enough space for one drone and accessories like one remote controller, three batteries, one charging hub, propellers, ND filter set, data cable, and a SD card.7. Compatibility:Mini 3 ProTips:With the Intelligent Flight Battery Plus, the aircraft will weigh more than 249 g. Please check and strictly abide by local laws and regulations before flying.In The Box:Intelligent Flight Battery Plus x 2Two-Way Charging Hub x 1Propellers (pair) x 2Screws x 12Shoulder Bag x 1USB 3.0 Type-C Data Cable x 1Specification: General Compatible with DJI: Mini 3 Pro Package Weight One Package Weight 1.06kgs / 2.33lb One Package Size 25cm * 20cm * 15cm / 9.84inch * 7.87inch * 5.91inch Qty per Carton 32 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 32 pcs = 5664 pcs40HQ: 412 cartons * 32 pcs = 13184 pcs
£238.99
-
DJI Hélice de reducción de ruido original DJI para Mavic 3 / Mavic 3 Classic / Mavic 3 Cine, 1 par, para Mavic 3 / Mavic 3 Classic / Mavic 3 Cine
1. Cada pala ha sido comprobada mediante una prueba de equilibrio dinámico. Tiene un bajo nivel de ruido en vuelo y una alta eficiencia aerodinámica. 2. Menos ruido, mayor alcance. 3. Especificaciones: Hélice X 1 par 4. Adecuado para: DJI Mavic 3 Classic / DJI Mavic 3 / DJI Mavic 3 Cine 5. Diámetro x paso: 23,9 x 13,5 cm 6. Peso: 8,5 gramos por ración. Señal de advertencia: 1. Siga las instrucciones para instalar las cuchillas. 2. Si la cuchilla se daña durante el uso, reemplácela lo antes posible. Especificación: General Compatible con DJI: Mavic 3 Clásico , Mavic 3 Peso del paquete Peso de un paquete 0,04 kg/0,10 lb Un tamaño de paquete 25 cm x 15 cm x 2 cm (9,84 pulgadas x 5,91 pulgadas x 0,79 pulgadas) Cantidad por caja 500 Peso de la caja 22,00 kg/48,50 lb Tamaño de la caja 50 cm * 50 cm * 44 cm / 19,69 pulgadas * 19,69 pulgadas * 17,32 pulgadas Contenedor de carga 20GP: 242 cajas * 500 piezas = 121000 piezas 40HQ: 562 cajas * 500 piezas = 281000 piezas
£16.99
-
Mira Sales Carcasa protectora con marco de silicona original para GoPro HERO5, carcasa (R), carcasa (P), carcasa (L), carcasa (G), carcasa (F), carcasa (RG), carcasa (B)
1. Estuche para marco de cámara original de alta calidad, especialmente diseñado para la cámara deportiva GoPro HERO5. 2. Material de silicona suave, protege su cámara del polvo, la suciedad, el aceite y los resbalones. 3. Varios colores brillantes para elegir, puedes elegir tu color favorito y conservarlo durante mucho tiempo. 4. La cámara, el pedestal y el tornillo que se muestran en la imagen no están incluidos. Especificación: General Compatible con GoPro: HERO6 Negro , HERO5 Negro Tipos Carcasa de montaje en marco Material Silicona Tamaño 7 x 6,5 x 4,5 cm Peso 23 gramos Peso del paquete Peso de un paquete 0,03 kg/0,07 lb Un tamaño de paquete 7 cm * 6,5 cm * 4,5 cm / 2,76 pulgadas * 2,56 pulgadas * 1,77 pulgadas Cantidad por caja 250 Peso de la caja 2,25 kg/4,96 lb Tamaño de la caja 45 cm x 35 cm x 35 cm (17,72 pulgadas x 13,78 pulgadas x 13,78 pulgadas) Contenedor de carga 20GP: 483 cajas * 250 piezas = 120750 piezas 40HQ: 1122 cajas * 250 piezas = 280500 piezas
£2.99 £0.99
-
DJI Control remoto DJI FPV 3 original compatible con DJI Avata 2 DJI Goggles 3, RC 3
1. Diseñado para la transmisión de video del DJI O4 con un diseño de antena integrada, es más liviano que su predecesor y cuenta con un tiempo de funcionamiento más prolongado. Las palancas de control se extienden 2 mm, lo que permite un control con uno o dos dedos. 2. Además de los modos Normal y Deportivo, el control remoto DJI FPV 3 ofrece el modo Manual, más adecuado para que los jugadores avanzados practiquen y dominen habilidades más sofisticadas. Consejos 1. Para lograr una sensación personalizada con el joystick, se recomienda utilizar el destornillador incluido para realizar los ajustes. Para obtener más detalles, consulte el manual o los videos tutoriales. 2. El control remoto DJI FPV 3 es compatible con una variedad de simuladores, incluidos Liftoff, Uncrashed, DCL y The Drone Racing League. Especificación: 1. Peso: Aprox. 240 g 2. Dimensiones: 165 × 119 × 62 mm (largo × ancho × alto) 3. Tiempo de funcionamiento: Aprox. 10 horas 4. Tiempo de carga: Aprox. 2 horas Compatibilidad: DJI Avata 2 Gafas DJI 3 En la caja: Control remoto DJI FPV 3 × 1 Control remoto DJI FPV 3 palancas de control (par) × 1 Destornillador en forma de L × 1 Especificación: General Compatible con DJI: Avata 2 DJI: Gafas 3 Peso del paquete Peso de un paquete 1,00 kg/2,20 lb Un tamaño de paquete 23 cm x 17 cm x 11 cm (9,06 pulgadas x 6,69 pulgadas x 4,33 pulgadas) Cantidad por caja 12 Peso de la caja 6,70 kg/14,77 lb Tamaño de la caja 48 cm x 36 cm x 35 cm (18,9 pulgadas x 14,17 pulgadas x 13,78 pulgadas) Contenedor de carga 20GP: 440 cajas * 12 uds. = 5280 uds. 40HQ: 1023 cajas * 12 piezas = 12276 piezas
£141.99
-
DJI Original Hot Shoe Adapter Plate for DJI Mic
1. Mounts the receiver to the camera hot/cold shoe port2. When not in use, it can be stored in the charging case3. Adaptable product: for DJI Mic4. Packing list: adapter board x 15. Weight: about 2gSpecification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 500 Carton Weight 24.50kgs / 54.01lb Carton Size 30cm * 50cm * 56cm / 11.81inch * 19.69inch * 22.05inch Loading Container 20GP: 317 cartons * 500 pcs = 158500 pcs40HQ: 736 cartons * 500 pcs = 368000 pcs
£7.99
-
DJI Original Intelligent Flight Battery 1435 mAh For DJI Neo, Battery 1435 mAh
1. The battery provides 18-minute flight time allowing the drone to perform at least 20 palm takeoff and landing excursions in succession.(Measured in a controlled test environment. Results may vary depending on the environment, actual use, and firmware version.)2. Its lightweight design does not compromise battery life. Carry a few extra batteries to ensure you never miss a moment.3. Capacity: 1435 mAh4. Weight: about 45 grams5. Nominal voltage: 7.3 V6. Charging limit voltage: 8.6 V7. Battery type: Li-ion8. Energy: 10.5 Wh9. Charging environment temperature: 5- 40 degrees Celsius10. Compatibility: NeoSpecification: General Compatible with DJI: Neo Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 6.10kgs / 13.45lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 20 pcs = 12400 pcs40HQ: 1439 cartons * 20 pcs = 28780 pcs
£41.99
-
DJI Original Intelligent Flight Battery 2453 mAh For DJI Mini 3 Pro / Mini 3, 2453 mAh
1. Be prepared and fly freely with peace of mind with 34 mins of max flight time with Mini 3 Pro; 38 mins of max flight time with Mini 3. 2. Tips:Measured at a constant speed of 21.6 kph in windless conditions. Specifications: 1. Capacity: 2453 mAh 2. Weight: Approx. 80.5 g 3. Voltage: 7.38 V 4. Charging Voltage Limit: 8.5 V 5. Battery Type: Li-ion 6. Energy: 18.1 Wh 7. Max Charging Power: 37 W 8. Charging Time: 64 mins (with 30W USB-C Charger and the battery mounted to the aircraft) 9. Charging Temperature: 5-40 degrees Celsius (41-104 degrees Fahrenheit) 10. Recommended Charger: 30W USB-C Charger or other USB Power Delivery chargers. 11. Compatibility: -Mini 3 Pro -Mini 3Specification: General Compatible with DJI: Mini 3, Mini 3 Pro Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 6cm * 12cm * 6cm / 2.36inch * 4.72inch * 2.36inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 194 pcs = 34338 pcs40HQ: 412 cartons * 194 pcs = 79928 pcs
£65.99
-
DJI Original Intelligent Flight Battery 2590 mAh For DJI Mini 4 Pro / Mini 3 Pro, DJI Mini 4 Pro
1. Provides a max flight time of 34 minutes, allowing you to fly and create freely with peace of mind.2. Weight: about 77.9 grams3. Capacity: 2590 mAh4. Nominal voltage: 7.32 volts5. Max Charging Voltage: 8.6 V6. Battery type: Li-ion7. Energy: 18.96 watt hours8. Charging time:-70 minutes (with the DJI 30W USB-C Charger and the battery mounted to the aircraft)-58 minutes (with the DJI 30W USB-C Charger and the battery inserted into the Two-Way Charging Hub)9. Charging Temperature: 5-40 degrees Celsius (41-104 degrees Fahrenheit)10. Recommended Chargers: DJI 30W USB-C Charger or other USB Power Delivery chargers11. Compatibility:DJI Mini 4 ProSpecification: General Compatible with DJI: Mini 4 Pro, Mini 3 Pro Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 108 Carton Weight 11.90kgs / 26.23lb Carton Size 38cm * 34cm * 47cm / 14.96inch * 13.39inch * 18.5inch Loading Container 20GP: 439 cartons * 108 pcs = 47412 pcs40HQ: 1019 cartons * 108 pcs = 110052 pcs
£65.99
-
DJI Original Intelligent Flight Battery 3750 MAh For DJI Mavic Air 2 / 2S, DJI Mavic Air 2 / 2S Battery
1. The Mavic Air 2 Intelligent Flight Battery provides a maximum flight time of 31 minutes for Air 2S (34 minutes for Mavic Air 2).2. With a built-in Intelligent Battery Management System, battery status is monitored and reported in real time, allowing you to focus less on power levels and more on flying.3. It also features overcharging and overdischarging protection as well as low-temperature protection.Specifications:1. Battery Type: Three-cell polymer lithium-ion battery2. Rated Capacity: 3500 mAh, 40.42 Wh (typical value)3. Rated Voltage: 11.55 V4. Charging Voltage Limit: 13.2 V5. Discharge Temperature: -10-60 Celsius (14 - 140 Fahrenheit)6. Charge Temperature: 5- 40 Celsius (23-113 Fahrenheit)7. Compatibility:-Air 2S-Mavic Air 2Specification: General Compatible with DJI: Air 2S, Mavic Air 2 Package Weight One Package Weight 0.26kgs / 0.56lb One Package Size 15cm * 12cm * 10cm / 5.91inch * 4.72inch * 3.94inch Qty per Carton 102 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 102 pcs = 18054 pcs40HQ: 412 cartons * 102 pcs = 42024 pcs
£103.99
-
DJI Original Launcher Windproof Cover for DJI Mic
1. With anti-wind noise reduction, dust and spit prevention function2. Installed in the DJI Mic transmitter, can effectively reduce wind noise3. Wear it outdoors or in windy environments to minimize the effects of wind noise during recording4. Adaptable product: DJI Mic5. Packing list: windproof fur cover x 16. Weight: about 1.1gSpecification: Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 6cm * 4cm * 4cm / 2.36inch * 1.57inch * 1.57inch Qty per Carton 500 Carton Weight 4.50kgs / 9.92lb Carton Size 47cm * 31cm * 31cm / 18.5inch * 12.2inch * 12.2inch Loading Container 20GP: 590 cartons * 500 pcs = 295000 pcs40HQ: 1370 cartons * 500 pcs = 685000 pcs
£3.99
-
DJI Original Multifunctional Focus Motor + Mounting Kit For DJI RS 3 Pro
1. The torque is increased by 3 times, and the noise is reduced by 50%. 2. The mounting components adopt a quick release structure, making the focus more efficient and reliable 3.MAX torque: 1.0 N m (8V) 4.MAX speed: 180 rpm (8V) 5. Quiescent current: 50mA (5V) 6. Stall current: 2.8A (8V) 7. Working voltage: 6-17.6V 8. Noise: 45 decibels 9. Number of gear teeth: 30 10. Modulus: 0.8 11. Working environment temperature: minus 20-45 degrees Celsius 12. Mounting conduit: 12 mm 13. Dimensions: 8 x 5 x 3.6 cm 14. Weight: 108 grams 15. Compatible products: For DJI RS 3 Pro, RS3, RS2, RSC 2 Packing list: 1. Follow focus motor (2022) x 1 2. Installation component set x 1 3. Follow focus rack x 1 4. Camera control cable (USB-C, 30cm) x 1 5. M4 screws (10 mm) x 4 6. Wrench (3 mm) x 1 7. Lens fixing strap x 1Specification: General Compatible with DJI: RS 3 Pro, RS 3, RSC 2, RS 2 Package Weight One Package Weight 0.26kgs / 0.57lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 146 Carton Weight 46.28kgs / 102.03lb Carton Size 60cm * 60cm * 64.3cm / 23.62inch * 23.62inch * 25.31inch Loading Container 20GP: 115 cartons * 146 pcs = 16790 pcs40HQ: 267 cartons * 146 pcs = 38982 pcs
£128.99
-
DJI Juego de filtros ND originales para DJI Mini 4 Pro (ND16/64/256), DJI Mini 4 Pro original
1. Proporciona conjuntos de filtros reductores de luz ND16/64/256 para hacer frente a entornos de fotografía con mucha luz durante el día. 2. Puede satisfacer las necesidades de supresión de alta luz y fotografía de larga exposición, como la fotografía de lapso de tiempo de larga exposición. 3. Productos adaptables: Para DJI Mini 4 Pro. 4. Lista de embalaje: lente reductora de luz ND16 x 1, lente reductora de luz ND64 x 1, lente reductora de luz ND256 x 1 5. Peso: aproximadamente 0,75 gramos (individual) Especificación: General Compatible con DJI: Mini 4 Pro Peso del paquete Peso de un paquete 0,05 kg/0,11 lb Un tamaño de paquete 9 cm x 6 cm x 3 cm (3,54 pulgadas x 2,36 pulgadas x 1,18 pulgadas) Cantidad por caja 320 Peso de la caja 10,70 kg/23,59 lb Tamaño de la caja 50 cm x 38 cm x 32 cm (19,69 pulgadas x 14,96 pulgadas x 12,6 pulgadas) Contenedor de carga 20GP: 438 cajas * 320 piezas = 140160 piezas 40HQ: 1018 cajas * 320 piezas = 325760 piezas
£48.99
-
DJI Abrazadera magnética para teléfono DJI OM 3 original para teléfonos móviles de 67 a 84 mm de ancho, abrazadera para teléfono 3
1. Fuerte succión y fuerte conexión. Conexión magnética entre el teléfono móvil y el cardán, instalación fácil y rápida. 2. Las garras del clip están cuidadosamente diseñadas, lo que puede evitar eficazmente bloquear las teclas del teléfono móvil y también puede adaptarse bien a teléfonos móviles grandes. 3. Diseño delgado y liviano, se adapta perfectamente al teléfono. 4. Productos compatibles: para Osmo Mobile 6 / Osmo Mobile SE / DJI OM 5 / DJI OM 4 SE/ DJI OM 4 Parámetro: 1. Peso: 31 gramos 2. Ancho de teléfono móvil compatible: 67 mm a 84 mm 3. Compatible con grosores de teléfonos móviles: 6,9 mm a 10 mm. 4. Capacidad de carga: 170 g a 290 g Recordatorio: contiene imanes, para evitar el efecto de magnetización, manténgalo alejado de tarjetas magnéticas, tarjetas IC, marcapasos, discos duros, chips RAM y otros dispositivos susceptibles. Especificación: General Compatible con DJI: Osmo Móvil 6 , OM 5 , OM 4 SE , OM 4 Peso del paquete Peso de un paquete 0,05 kg/0,11 lb Un tamaño de paquete 14 cm x 12 cm x 5 cm (5,51 pulgadas x 4,72 pulgadas x 1,97 pulgadas) Cantidad por caja 500 Peso de la caja 27,00 kg/59,52 lb Tamaño de la caja 50 cm * 50 cm * 54 cm / 19,69 pulgadas * 19,69 pulgadas * 21,26 pulgadas Contenedor de carga 20GP: 197 cajas * 500 piezas = 98500 piezas 40HQ: 458 cajas * 500 piezas = 229000 piezas
£21.99
-
DJI Original Parallel Charging Hub For DJI Flip Can Store And Charge 2 Batteries
1. It can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge 2 Intelligent Flight Batteries simultaneously in just 70 minutes. With at least one battery stored, it can serve as a power bank to charge devices.2. Tips: Parallel charging requires the DJI 65W Portable Charger or a charger with at least 65W output, 4.3A current at 15V, and PD protocol support, along with a charging cable rated for at least 5A and also supporting PD protocol. Otherwise, batteries will be charged individually.3. Input: 5V to 15V, up to 4.3A4. Output (charging): 5V to 15V, up to 3A5. Charging method: charge 2 batteries simultaneously (with charger of 65 W or more)6. Compatibility: DJI FlipSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 75 Carton Weight 10.10kgs / 22.27lb Carton Size 38cm * 42cm * 32cm / 14.96inch * 16.54inch * 12.6inch Loading Container 20GP: 522 cartons * 75 pcs = 39150 pcs40HQ: 1212 cartons * 75 pcs = 90900 pcs
£41.99
Has visto 696 de 1115 productos