Productos
-
TTGO TTGO LORA32 V2.1 ESP32 0.96 inch OLED Bluetooth WiFi Wireless Module 915MHz SMA IP5306 Module with Antenna, 915MHz
1. Working voltage: 1.8~13.7V 2. Acceptable current: 10~114mA 3. Emission current: - 120mA at + 20dBm - 90 mA lies at +17dBm - 29mA at +13dBm 4. Working frequency: 915MHz 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm lies at LoRa & 62.5Khz & SF = 12 & 146bps - 136dBm lies at LoRa & 125Khz & SF = 12 & 293bps - 118dBm lies at LoRa & 125Khz & SF = 6 & 9380bps - 123dBm lies at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: -1.2K~1300Kbps at FSK -0.018K~37.5Kbps at LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA SLEEP - 1.5uA IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low voltage detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler 21. SMA antenna IP5306 This product is based on LoRa radio frequency, 868MHz (common in North America), 915MHz (common in Europe) and 433MHz (common in Asia Pacific)Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 7.00kgs / 15.43lb Carton Size 36cm * 26cm * 26cm / 14.17inch * 10.24inch * 10.24inch Loading Container 20GP: 1095 cartons * 100 pcs = 109500 pcs40HQ: 2543 cartons * 100 pcs = 254300 pcs
£20.99
-
TTGO TTGO Meshtastic T-Beam V1.1 ESP32 923MHz OLED WiFi Bluetooth GPS NEO-6M SMA 18650 Battery Holder, 923MHZ OLED
Product demonstration (Note: OLED is not soldered to T-beam) Features: 1. ESP 32 version: Rev1 2. WiFi 3. Bluetooth 4. 4MB pSRAM 5. 4MB flash memory 6. Three-dimensional antenna product description: 1. Working voltage: 1.8~3.7V 2. Acceptable current: 10~14 mA 3. Transmitting current: 120 mA@+20 dBm 4. 90 mA@+17 dBm 5. 29 mA@+13 dBm 6. Working frequency: 433/470 MHz (433 HMz version) SX1278 /868m/915 m (868 MHz version) SX1276 7. Transmitting power: +20 dBm 8. Receiving sensitivity: -139 dBm@Lora&62.5Khz&SF=12&146 bps -136 dBm@Lora&125 Khz&SF=12&293 bps -118 dBm@Lora&125 Khz&SF=6&9380 bps -123 dBm@FSK&5 Khz&1.2Kbps 9. Frequency error: +/-15 kHz 10. FIFO space: 64 bytes 11. Data rate: 1.2k~300 Kbps@FSK 0.018K~37.5Kbps@Lora 12. Modulation method: FSK, GFSK, MSK, GMSK, Lora TM, OOK 13. Interface form: SPI 14. Sleep current: 0.2uA 15. 1.5uA@Idle 16. Working temperature: -40 degrees Celsius-+85 degrees Celsius 17. Digital RSSI function 18. Automatic frequency correction 19. Automatic gain control 20. Low pressure detection 21. Fast wake-up and frequency hopping 22. Highly configurable packet handler Global Positioning System: 1. GPS module neo-6m, 3V-5V power supply universal 2. The predetermined module with ceramic antenna, super signal 3. Save configuration parameter data EEPROM 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 power: 1. TP 5400 2. 1A battery management 3. LED indicator: there are 4 LEDs to display the battery status in real time 4. USB 5. CP 2104-GMR 6. Pre-Flash firmware OLED description: 1. Size: 0.96 inches 2. High resolution: 128x64 3. Color: white 4. Viewing angle: >160 degrees 5.Driver IC: SSD 1306 6. Working temperature: -30~80 degrees Celsius 7. Module size (generous): 27.0mm x 27.0mm x 4.1mm 8. Support a variety of control chips: fully compatible with Arduino, 51 series, MSP 430 series, STM 32/2, CSR chips, etc. (a lot of examples are available for reference) 9. Wide voltage support: directly support 3.3V~5V DC power supply without any modification 10. Ultra-low power consumption: 0.04W in normal operation 11. IO port occupies the smallest display: IIC communication, as long as two IO ports Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs
£42.99
-
TTGO TTGO Mini32 V2.0.13 ESP32 WiFi Bluetooth Module Development Board Electronic Module
1. Model Number: MINI 32 V2.0 2. Main chip: ESP 32 3. Flash Memory Chip: 25Q32 4. Charging IC Chip: TP4054 5. USB to Serial Port Chip: CH340C 6. Package Includes: 1 x TTGO MINI 32 V2.0 ESP32 WiFi Bluetooth Module 2 x Long Female Pins 2 x Normal Pins 4 x Short Female PinsSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs
£6.99
-
TTGO TTGO OV2640 Fisheye Single Lens Camera Module for T-Camera Plus ESP32-DOWDQ6 8MB SPRAM, Fisheye Single Lens
1. Product series: camera module 2. Model: OV2640 3. Purpose: video recorder 4. Power: 3.3W 5. Adapt to T-Camera Plus ESP32-DOWDQ6 8MB SPRAMSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 4.00kgs / 8.82lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs
£6.99
-
TTGO TTGO OV2640 Standard Extended Single Lens Camera Module for T-Camera Plus ESP32-DOWDQ6 8MB SPRAM, Standard Extended Single Lens
1. Product series: camera module 2. Model: OV2640 3. Purpose: video recorder 4. Power: 3.3W 5. Adapt to T-Camera Plus ESP32-DOWDQ6 8MB SPRAMSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 4.00kgs / 8.82lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs
£7.99
-
TTGO TTGO T-Beam ESP32 Bluetooth WiFi Module 868MHz GPS NEO-M8N LORA 32 Module with Antenna & 18650 Battery Holder, 868MHz
1. New version of ESP32: REV1 2. Wi-Fi/Bluetooth/4MB flash memory/4MB PSRAM/3D antenna/LORA Product description 1. Working voltage: 1.8~3.7v 2. Acceptable current: 10~14mA 3. Emission current: -120mA at +20dBm -90 mA at +17dBm -29mA at +13dBm 4. Working frequency: 868MHz version SX1276 5. Transmitting power: + 20dBm 6. Receiving sensitivity: - 139dBm at LoRa and 62.5Khz & SF = 12 and 146bps - 136dBm at LoRa and 125Khz&SF = 12 & 293bps - 118dBm at LoRa & 125Khz & SF = 6& 9380bps - 123dBm at FSK & 5Khz & 1.2Kbps 7. Frequency error: +/- 15KHz 8. FIFO space: 64Byte 9. Data rate: - 1.2K~300Kbps at FSK - 0.018K~37.5Kbps in LoRa 10. Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 11. Interface form: SPI 12. Sleep current: - 0.2uA in SLEEP - 1.5uA in IDLE 13. Working temperature: -40 degrees Celsius-+ 85 degrees Celsius 14. Digital RSSI function 15. Automatic frequency correction 16. Automatic gain control 17. RF wake-up function 18. Low pressure detection and temperature sensor 19. Fast wake-up and frequency hopping 20. Highly configurable packet handler Global Positioning System 1. GPS module NEO-M8N, 3V-5V power supply universal 2. Designated module with ceramic antenna, super strong signal 3. Save configuration parameter data EEPROM Down 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 Power 1. TP5400 2. 2A battery management 3. LED indicator: There are 4 LEDs to display the battery status in real time. 4. Power button: Click once to start. Tap twice quickly to close. 5. USB 6. CP2104-GMR 7. Pre-flash firmware: SoftRF V4.0 Packing list: 1. TTGO T-Beam ESP32 2. 433MHz antenna 3. Pin x 1 4. Screw Washer x 3 Note: OLED is not included in the invoiceSpecification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 22cm * 18cm * 5cm / 8.66inch * 7.09inch * 1.97inch Qty per Carton 100 Carton Weight 7.00kgs / 15.43lb Carton Size 45cm * 37cm * 52cm / 17.72inch * 14.57inch * 20.47inch Loading Container 20GP: 308 cartons * 100 pcs = 30800 pcs40HQ: 715 cartons * 100 pcs = 71500 pcs
£44.99
-
TTGO TTGO T-PCIE ESP32-WROVER-B AXP192 Chip WiFi Bluetooth Nano Card SIM Series Module 16MB Hardware Composable Development Board, 16MB
Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. T-PCIE 16MB x 1 2. Charging cable x 1 3. Needle Pin x 2Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 13.00kgs / 28.66lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 300 pcs = 169800 pcs40HQ: 1314 cartons * 300 pcs = 394200 pcs
£13.99
-
TTGO TTGO T-PCIE ESP32-WROVER-B AXP192 Chip WiFi Bluetooth Nano Card SIM Series Module 4MB Hardware Composable Development Board, 4MB
Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. T-PCIE 4MB x 1 2. Charging cable x 1 3. Needle Pin x 2Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 13.00kgs / 28.66lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 300 pcs = 169800 pcs40HQ: 1314 cartons * 300 pcs = 394200 pcs
£13.99
-
TTGO TTGO T-PCIE ESP32-WROVER-B AXP192 Chip WiFi Bluetooth Nano Card SIM Series Module Hardware Composable Development Board, PCIE-SIM7070G Module, PCIE-SIM7070G Module
About The ProductHardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. PCIE-SIM7070G module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2SIM7070GSIM7070G suitable global: 1. NB-IOT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 2. CAT-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 3. GSM/GPRS/EDGE: 850/900/1800/1900MHz 4. GNSS: C/A CODE - GPS L1:1575.42+/-1.023MHz - GLONASS L1: 1598.0625~1605.375MHz - BDS B1: 1559.052~1591.788MHz - GALILEO L1:1575.42+/-1.023MHzSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 36cm * 22cm * 22cm / 14.17inch * 8.66inch * 8.66inch Loading Container 20GP: 1530 cartons * 300 pcs = 459000 pcs40HQ: 3552 cartons * 300 pcs = 1065600 pcs
£13.99
-
TTGO TTGO T-PCIE ESP32-WROVER-B AXP192 Chip WiFi Bluetooth Nano Card SIM Series Module Hardware Composable Development Board, SIM7600E-PCIE, SIM7600E-PCIE
Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS SIM7600E suitable for EMEA/Kor/Thailand: 1. LTE-TDD: B38/B40/B41 2. LTE-FDD: B1/B3/B5/B7/B8/B20 3. UMTS/HSPA+: B1/B5/B8 4. GSM/GPRS/EDGE:B3/B8 Packing list 1. SIM7600E-PCIE module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 36cm * 22cm * 22cm / 14.17inch * 8.66inch * 8.66inch Loading Container 20GP: 1530 cartons * 300 pcs = 459000 pcs40HQ: 3552 cartons * 300 pcs = 1065600 pcs
£48.99
-
TTGO Placa de desarrollo de módulo de carga solar TTGO T-SIM7000G ESP32 WiFi Bluetooth 18560 con soporte para batería, T-SIM7000G
Descripción del producto Especificaciones del hardware: 1. Chip principal: ESP32 2. Módulo: ESP32-WROVER-B,SIM7000G 3. Interfaz: USB, tarjeta SD, interfaz de entrada solar 4. Memoria Flash: 4 Mb Flash / 8 Mb PSRAM 5. Botón: Reinicio, interruptor de encendido 6. USB a TTL: CP2104 7. Reloj del coche: 40 MHz 8. Tamaño de la tarjeta SIM: Tarjeta nano SIM 9. Antena SIM 10. Antena GPS 11. Rango de temperatura de funcionamiento: -40-85 grados 12. Tamaño del producto: 111 mm x 37 mm x 20 mm 13. Peso del producto: 50 g Especificaciones de potencia: 1. Voltaje de funcionamiento: entrada de 5 V 2. Rango de voltaje de entrada solar: 4,4-6 V 3. Corriente de trabajo: aproximadamente 200 mA 4. Corriente de carga: 780 mA 5. Modelo de batería: 18650 6. Modelo de soporte de batería: soporte de batería 18650 7. Conector JST: 2 pines, 2 mm 8. USB: TIPO C 3.0 Wifi: 1. Normas: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC 2. Protocolo: 802.11 b/g/n (802.11n, velocidad de hasta 150 Mbps) Admite polimerización A-MPDU y A-MSDU Intervalo de protección de 0,4 s 3. Frecuencia: rango 2,4 GHz ~ 2,5 GHz (2400 M ~ 2483,5 M) 4. Potencia de transmisión: 22dBm 5. Distancia de comunicación: 300 m Bluetooth: 1. Cumple con el protocolo Bluetooth: v4.2BR/EDR y el estándar BLE 2. Radiofrecuencia: con receptor NZIF de sensibilidad de -97dBm, emisor AFH de clase 1, clase 2 y clase 3 3. Frecuencia de audio: frecuencia de audio CVSD y SBC Especificación del software: 1. Modo Wi-Fi: Estación/SoftAP/SoftAP+Estación/P2P 2. Mecanismo de seguridad: WPA/WPA2/WPA2-Enterprise/WPS 3. Tipo de cifrado: AES/RSA/ECC/SHA 4. Actualización de firmware: ¿Descarga UART/OTA? ¿A través de la red/host para descargar y escribir firmware? 5. Desarrollo de software: Soporte para el desarrollo de servidores en la nube/SDK para el desarrollo de firmware de usuario 6. Protocolo de red: IPV4, IPV6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. Configuración de usuario: conjunto de instrucciones AT +, servidor en la nube, aplicación Android/iOS 8. Sistema operativo: FreeRTOS Función de actualización de versión: 1. Los polos positivo y negativo de las baterías están conectados a la protección incorrecta, protección contra sobrecarga y sobredescarga. 2. Control de potencia del GPS, reduce el consumo de energía, el más bajo alcanza los 300 uA cuando está inactivo 3. Reemplazo del IC de carga ordinario por un IC de carga solar Especificación: Peso del paquete Peso de un paquete 0,08 kg/0,17 lb Un tamaño de paquete 11 cm x 11 cm x 3 cm (4,33 pulgadas x 4,33 pulgadas x 1,18 pulgadas) Cantidad por caja 100 Peso de la caja 7,50 kg/16,53 lb Tamaño de la caja 57 cm x 32 cm x 24 cm (22,44 pulgadas x 12,6 pulgadas x 9,45 pulgadas) Contenedor de carga 20GP: 609 cajas * 100 piezas = 60900 piezas 40HQ: 1414 cajas * 100 piezas = 141400 piezas
£47.99
-
TTGO TTGO T-SIM7600E-H ESP32 WiFi Bluetooth 18560 Battery Holder Solar Charge Module Development Board, T-SIM7600E-H
Product Description Hardware Specifications: 1. Main chip: ESP32 2. Module: ESP32-WROVER-B,SIM7600E-H 3. Interface:USB,SD Card,Solar Input interface 4. Flash Memory: 4M Flash / 8M PSRAM 5. Button: Reset,Power switch 6. USB to TTL: CP2104 7. Car Clock: 40MHz 8. SIM Card Size: Nano SIM Card 9. SIM Antenna 10. GPS Antenna 11. Operating Temperature Range: -40-85 degrees 12. Product Size: 111mm x 37mm x 20mm 13. Product Weight: 50g Power Specifications: 1. Working Voltage: 5V input 2. Solar input voltage range???4.4-6V 3. Working Curent: About 200mA 4. Charging Current: 780mA 5. Battery Model: 18650 6. Battery Holder Model: 18650 battery holder 7. JST Connector: 2pin 2mm 8. USB: TYPE-C 3.0 Wi-Fi: 1. Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n(802.11n???speed up to150Mbps)A-MPDU and A-MSDU polymerization???support 0.4??S Protection interval 3. Frequency: range 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth: 1. Protocol meet Bluetooth : v4.2BR/EDR and BLE standard 2. Radio Frequency : with -97dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH 3. Audio Frequency : CVSD&SBC audio frequency Software Specification: 1. Wi-Fi Mode : Station/SoftAP/SoftAP+Station/P2P 2. Security Mechanism : WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type : AES/RSA/ECC/SHA 4. Firmware Upgrade :UART download/OTA???Through network/host to download and write firmware??? 5. Software Development : Support cloud server development /SDK for user firmware development 6. Networking Protocol : IPV4, IPV6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User Configuration : AT + Instruction set, cloud server, Android/iOS APP 8. OS : FreeRTOS Version update function: 1. The batterys positive and negative poles are connected to the wrong protection, overcharge and over discharge protection 2. GPS power control, reduce power consumption, the lowest reaches 300uA when sleeping 3. Replacement of ordinary charging IC with solar charging ICSpecification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 8.20kgs / 18.08lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs
£79.99
-
TTGO TTGO T8 V1.7 WiFi Bluetooth Module ESP32 WROVER 4MB FLASH 8MB PSRAM Module, 4MB FLASH
1. Espressif official ESP32-WROVER module 2. New ESP32 version: REV1 3. Wireless Internet 4. Bluetooth 5. 4MB flash memory 6. 8MB PSRAM 7. Lithium battery interface, 500mA maximum charging current 8. Support TF memory card 9. With 3D wiresSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch Qty per Carton 400 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 400 pcs = 375600 pcs40HQ: 2180 cartons * 400 pcs = 872000 pcs
£9.99
-
Waveshare Waveshare 25334 For Jetson Orin Aluminum Alloy Case With Camera Holder
1. For Jetson Orin Nano and Jetson Orin NX kits2. Reserve air outlets on three sides and a dedicated built-in fan hole on the top to provide excellent heat dissipation.3. Precise opening design, exquisite manufacturing technology, and beautiful fit4. Onboard power indicator light5. Camera bracket design, mounting holes for monocular or binocular cameras, maximum 180-degree rolling angle6. Equipped with flat ribbon cable for use with 40PIN connector7. Silicone non-slip feet, more stable placement and reduced bottom contact area8. DIN rail mounting holes are reserved to facilitate installation in specific scenarios.9. Product size: 122 x 95 x 91mm10. Weight: 378kgpacking list:-Aluminum body shell (upper and lower + side panels) x 1-Camera stand bottom mount x 1-Camera stand top mount x 1-Antenna x 2-IPEX4 to SMA cable x 2-Button with 4PIN cable x 1-Cable 2x20PIN 55mm x 1-Screwdriver x 1-Screw pack and accessories x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 18cm * 12cm * 6cm / 7.09inch * 4.72inch * 2.36inch Qty per Carton 20 Carton Weight 10.70kgs / 23.59lb Carton Size 38cm * 26cm * 32cm / 14.96inch * 10.24inch * 12.6inch Loading Container 20GP: 843 cartons * 20 pcs = 16860 pcs40HQ: 1958 cartons * 20 pcs = 39160 pcs
£11.99
-
Waveshare WAVESHARE Barcode QR Code Scanning Module Type E Metal Casing DPM Code Reading Onboard USB UART Dual Interfaces, 32387
1. Resolution: 1080 × 12802. Scanning angle: pitch 55 degrees; Tilt 70 degrees; Rotation 360 degrees3. Scanning modes: inductive scanning, continuous scanning, Button scanning (default)4. Communication interface: USB keyboard mode (default), USB virtual serial port, UART serial port5. Light source: white light illumination, Green light aiming (both visible light)6. Voltage: 5V7. Working current: 270mA8. Standby current: 140mA9. Equipped with dual TTL and USB hardware interfaces, configurable for three output modes: USB virtual serial port, USB keyboard mode, and TTL serial port.10. Supports three modes: manual button trigger reading, automatic continuous scanning reading, and automatic inductive scanning reading.11. Supports a variety of barcode types, compatible with various industrial carriers such as metal engraved codes and PCB board engraved codes, easily scanning industrial-specific barcodes such as DotCode and DM.Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 9.80kgs / 21.61lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs
£71.99
-
Waveshare Waveshare Modbus RTU 8-Channel RS485 Relay Module With Digital Input Multi Isolation Protection Circuits, 7~36V Power Supply
1. This product is an industrial-grade 8-channel relay module controlled by RS485 interface, featuring 8-channel switch input, adopting Modbus RTU protocol, and equipped with built-in power isolation, magnetic coupling isolation, and TVS protection circuits. It is designed with an ABS housing. This product is easy to operate and features fast communication speed, stability, reliability, and safety. It is suitable for various industrial control devices or applications with high communication requirements.2. It supports setting the device address (1 to 255) to cascade multiple devices through the RS485 bus.3. It has flashing on and off functions, allowing parameters to be set in the instructions to operate the relay to turn on for a certain period and then automatically turn off.4. It has an integrated power isolation circuit on the board, providing stable isolated voltage, and the isolation end does not require additional power supply.5. It has an integrated magnetic coupling isolation circuit on the board, capable of signal isolation, with high reliability, strong anti-interference, and low power consumption.6. It has a self-resetting fuse and TVS (transient voltage suppressor) on the board, effectively suppressing surge voltage and transient peak voltage in the circuit, preventing overcurrent and overvoltage, and protecting against lightning and static electricity.7. It has an integrated optocoupler isolation circuit on the board to prevent interference from the relays high-voltage circuit.8. It uses a dedicated relay driver chip with built-in freewheeling diode protection, providing stronger and more stable driving capability.9. The switch input has bidirectional optocoupler isolation, supporting both passive and active switch input, with an internal anti-bounce algorithm. The relay supports switch input linkage mode or flip mode control.10. It has an anti-reverse connection circuit on the board to prevent damage to the circuit from reversed positive and negative connections.11. It uses high-quality relays, allowing a load of up to 10A 250V AC or 10A 30V DC.12. It has a rail-mounted ABS protective housing, making installation and use convenient, and is safer with the housing.13. It has an external LED indicator light for easily checking the MCU status and signal transmission and reception status. Parameters:1. Power Supply Voltage: 7 - 36V2. Communication Interface: RS4853. Communication Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560004. Default Communication Format: 9600, N, 8, 15. Relay Channels: 8 channels6. Contact Type: One normally open, one normally closed7. Contact Load: Less than or equal to 10A 250V AC or less than or equal to 10A 30V DC8. Digital Input: 8DI, 5 - 36V, passive input/active input (NPN type or PNP type), built-in bidirectional optocoupler9. Modbus Protocol: Standard Modbus RTU protocol10. RS485 Address Setting: 1 - 25511. Indicator Lights:--STA: MCU indicator light, flashes when MCU is working normally--TXD: Transmission indicator light, lights up when data is being sent--RXD: Reception indicator light, lights up when data is being receivedSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 5.60kgs / 12.35lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs40HQ: 1212 cartons * 30 pcs = 36360 pcs
£34.99
-
Waveshare Waveshare RGBWC Colorful COB LED Strip, WS2812B Control Chips, IP65 Protection, Programmable LED Strip, 1m, 5m
1. Flexible and bendable, with low-voltage safe touch, using double-sided electroplated plates, highly durable, and can be freely folded into various shapes. 24V low-voltage design, low heat generation, safe and energy-saving2. RGBWC five-color light source, combining colorful lighting effects with pure white light, meeting the needs of lighting and atmosphere3. Uniform and soft light, providing comfortable vision. COB technology, without screen flickering, offers an extremely bright viewing experience4. It has a wide range of application scenarios and can be used to create immersive e-sports desktops, intelligent living room lighting effects, display cases and computer cases ambient lights. Allow the space to dynamically change its lighting and shadows in real time according to the scene5. High-viscosity double-sided adhesive, resistant to high temperatures, not prone to falling off, lightweight and aesthetically pleasing, easy to install6. IP65 protection level. The surface of the light beads is covered with flexible waterproof gel layer, which can prevent low-pressure jet waterParameters1. LED type: COB2. Voltage: 24V3. Circuit board: FPC with width of 15mm4. Working power: 26W/meter5. Specification: 1428 lights/meter6. Terminal wires: red wire (positive pole of 24V), white/black wire (negative pole of 24V), green wire (DATA signal line)7. IC model: WS2812B8. Color: RGBWC9. Beam angle: 120°10. Gray level: 256 gradations adjustable (for each color)11. Protection level: IP65Specification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 12cm * 12cm * 4cm / 4.72inch * 4.72inch * 1.57inch Qty per Carton 96 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 96 pcs = 39552 pcs40HQ: 958 cartons * 96 pcs = 91968 pcs
£12.99 - £57.99
-
Pedal USB inalámbrico con Bluetooth
1. Interruptor de pie inalámbrico Bluetooth + USB, modo USB + modo Bluetooth: dos formas de conexión, use un cable USB o Bluetooth para conectar su PC o teléfono móvil. Permite operar con manos libres en iPad, tabletas Android y computadoras con su pie para trabajar, jugar, presionar para hablar, etc. 2. Simular atajos de teclado: Se trata de teclados con funciones personalizadas de dos teclas o unas pocas teclas, en los que se puede personalizar una tecla, una combinación de teclas, teclas de acceso rápido o teclas de acceso directo. (por ejemplo, "Ctrl + Alt + P" o "Alt + A") 3. Aplicación: máquinas de coser, máquinas de coser eléctricas, máquinas dispensadoras, máquinas herramientas, equipos médicos, instrumentos, computadoras de oficina, etc. 4. Fácil y conveniente: no solo se puede utilizar en su PC a través de un cable USB o Bluetooth inalámbrico, también se puede utilizar para iPad, iPhone, tableta, teléfono inteligente con Bluetooth inalámbrico. Software de configuración del pedal (descargar). 5. Diseño ergonómico: Su diseño ergonómico maximiza la facilidad de uso: basta con tocar suavemente el pedal correspondiente. Es resistente, tiene un buen peso y está bien fabricado. Especificación: Peso del paquete Peso de un paquete 0,85 kg/1,87 lb Un tamaño de paquete 33 cm * 17,5 cm * 5 cm/12,99 pulgadas * 6,89 pulgadas * 1,97 pulgadas Cantidad por caja 22 Peso de la caja 18,00 kg/39,68 lb Tamaño de la caja 69 cm x 43 cm x 30 cm (27,17 pulgadas x 16,93 pulgadas x 11,81 pulgadas) Contenedor de carga 20GP: 299 cajas * 22 uds. = 6578 uds. 40HQ: 695 cajas * 22 piezas = 15290 piezas
£26.99
-
XINYI XY-S100L Sini Audio Channel 2.1 Bluetooth Power Board Module, XY-S100L
1. Audio channel: 2.1 channel2. Bluetooth version: 5.03. Audio input: Bluetooth+AUX+U disk+USB sound card4. Audio output: Left and right channel + subwoofer + 3.5mm interface stereo output5. Volume adjustment: Encoder knob adjustment, smooth feel6. Frequency range: 20Hz-30KHz7. Signal to noise ratio: 92dB8. Output power: 50W x 2 (left and right channels) + 100W (subwoofer)9. Left and right channel speakers: 10-100W /4-8 ohm10. Subwoofer: 20-200W /4-8 ohm11. Protection mechanism: Static electricity, overcurrent, overheating and short circuit protection12. Adapter power supply: Above DC 5-26V/10A13. Function: Support Sinilink APP control14. Size: About 9.5 x 8.8 x 2.5cm15. Weight: About 156gPacking list:1. Upper cover x 12. Bare board x 13. Lower cover x 14. Knob cap x 65. M2x4+3 copper pillar x 46. M2x3 screw x 87. M2x18 copper pillar x 48. Heat sink x 19. Thermally conductive silicone paste x 1Specification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 100 pcs = 31300 pcs40HQ: 727 cartons * 100 pcs = 72700 pcs
£8.99
-
XY-C100L Stereo Stepless Tuning Bluetooth Digital Power Amplifier Board, XY-C100L
1. Using the rotary encoder used in high-end speakers, stepless tuning, smooth hand feel, one-key start and stop2. High-quality all-copper DC plug, long life3. 3.5mm audio output, connected to active power box4. Free large area heat sink5. Number of channels: left and right dual channel (stereo)6. Protection mechanism: power reverse connection protection, short circuit protection, self-recovery overheat protection7. Purpose: Bluetooth speaker amplifier motherboard8. Bluetooth version: 5.09. Adapter speaker: 20-300W 4 ohm 8 ohm10. Transmission distance: 15 meters (without blocking)11. Supply voltage: DC 5-26V12. Dimensions: 53x18x58mm13. Weight: about 70gSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 336 Carton Weight 30.00kgs / 66.14lb Carton Size 55cm * 55cm * 27cm / 21.65inch * 21.65inch * 10.63inch Loading Container 20GP: 326 cartons * 336 pcs = 109536 pcs40HQ: 757 cartons * 336 pcs = 254352 pcs
£5.99
-
XY-C15H 20W Dual Channel HIFI Bluetooth 5.0 Stereo Digital Audio Power Amplifier Board with Shell, with Shell
1. Power supply: DC9-24V/2A and above 2. Bluetooth Version: 5.0 3. Audio input: Bluetooth + AUX input 4. Transmission distance: 15 meters (unobstructed) 5. Volume adjustment: high-end encoder knob adjustment, smooth feel 6. Adapter speaker: 10W-100W /4 ohm-16 ohm 7. Output power: 20Wx2 8. Protection mechanism: electrostatic protection, overheating protection, overcurrent protection, short circuit protection 9. Unique function: support Sinilink-APP control 10. Product size: 67 x 47 x 18mm 11. Material: PCB circuit boardSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 180 Carton Weight 10.50kgs / 23.15lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 180 pcs = 84960 pcs40HQ: 1096 cartons * 180 pcs = 197280 pcs
£3.99
-
XY-T50L 12V Bluetooth 5.0 Audio Digital Class D Receiver Module With Amplifier, XY-T50L
1. Adaptable power supply: DC5-26V/5A or more2. Bluetooth version: 5.03. Audio input: Bluetooth + AUX + U disk + USB sound card4. Volume adjustment: 360 degree infinitely adjustable encoder5. Audio output: Passive speaker + 3.5mm audio interface6. Output power: 50Wx27. Output filtering: filter-free8. Protection mechanism: static electricity, overcurrent, short circuit, overheating, etc.9. Heat dissipation method: heat sink + shell10. Applicable speakers: 4-8 Ohm 10-200W11. Large area heat sink with special heat-conducting silicone paste close to the shell of the auxiliary copper heat dissipation, heat dissipation area increased exponentially, to ensure the product full power high-performance operation12. Size: 84x65x25mm13. Weight: about 85gSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 11cm * 9cm * 5cm / 4.33inch * 3.54inch * 1.97inch Qty per Carton 296 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 296 pcs = 52392 pcs40HQ: 412 cartons * 296 pcs = 121952 pcs
£7.99
-
ZK-1002L Mini High Power Bluetooth Amplifier Board with Knob Adjust Volume Switch, ZK-1002L
1. Bluetooth 5.0, high transmission efficiency and long transmission distance2. Large volume black gold heat sink to ensure efficient heat dissipation3. Potentiometer to adjust the volume, with switch, easy to control the volume, very suitable for DIY speakers, if it is a metal box, you need to lead out the Bluetooth antenna4. The copper DC connector is used, which can withstand large current and does not generate heat.5. 4 green gold capacitors to ensure power storage capacity, continuous and stable power supply is the premise of good sound quality6. Comes with a DC head with cable, which can be compatible with the input power interface of this product, even if you do not have a DC head adapter or battery, you can also connect easily7. The grid terminal is convenient for wiring, and the adjacent wires are not easy to be short-circuited8. Protection mechanism: self-recovery short circuit protection, self-recovery overheat protection9. Adapter speaker: 50-300W 4 to 8 ohms10. Transmission distance: 15 meters (without blocking)11. Power supply voltage: DC 5-24V power supply12. Rated power: 100w13. Number of channels: left and right dual channel (stereo)14. Precautions for use: The power switch on the board is a standby switch. After the switch is turned off, the machine is in a low-power standby state. To completely turn off the power or not use it for a long time, you can unplug the DC plug on the machine.15. Dimensions: 69 x 53 x 22mm16. Weight: about 124gSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 182 Carton Weight 30.00kgs / 66.14lb Carton Size 56cm * 45cm * 22cm / 22.05inch * 17.72inch * 8.66inch Loading Container 20GP: 481 cartons * 182 pcs = 87542 pcs40HQ: 1116 cartons * 182 pcs = 203112 pcs
£6.99
-
ZK-1002M Mini Stereo Bluetooth Audio Receiver D Class Digital Power Plate Module, ZK-1002M
1. Audio source input: Bluetooth + AUX + U disk + computer USB (plug and play)2. Adapter power supply: DC5-24V (high voltage is recommended for high power)3. Output power: 100Wx24. Adapted speakers: 20-200W, 4-8 ohms5. Number of channels: Left and right dual channels (stereo)6. Bluetooth version: 5.07. Transmission distance: More than 15 meters, no obstruction8. Bluetooth name: Wuzhi Audio9. Protection mechanism: overheating, overcurrent, short circuit protection10. Power supply voltage:- 12V: 8 ohms/20W+20W, 4 ohms/40W+40W- 15V: 8 ohms/35W+35W, 4 ohms/60W+60W- 19V: 8 ohms/55W+55W, 4 ohms/80W+80W- 24V: 8 ohms/70W+70W, 4 ohms/100W+100W11. Size: About 6x6x2.9 cm12. Weight: About 66g13. Reminder: There will be enough output power only when the audio input is enough and the power supply/current is enough. the higher the power supply voltage, the higher the relative power, and speakers with different impedances will have different output powers. in the case of sufficient voltage and current, the larger the horn ohms, the smaller the relative sound powerSpecification: Package Weight One Package Weight 0.12kgs / 0.25lb One Package Size 15cm * 12cm * 3.5cm / 5.91inch * 4.72inch * 1.38inch Qty per Carton 100 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 100 pcs = 44400 pcs40HQ: 1031 cartons * 100 pcs = 103100 pcs
£6.99
Has visto 120 de 125 productos