Search results for "control module"
-
EL-50448 Tire Pressure Monitor Sensor TPMS Activation Tool OEC-T5, Tire Pressure Monitor Sensor
Features1. For GM vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448. 2. Also works on 2014 GM models 3. The tire pressure sensor on models in & after 2012 can be read, only with some specified diagnostic tools. 4. Powered by 9V battery (not included)NoteBefore tire pressure monitoring system works normally properly, the body control module will record ID information of each position in the tire pressure sensor; and use the following methods to read the tire pressure sensor after replacing a tire or wheel speed sensor. Please refer to the specific methods as follows: Step 1: Enter leaning mode - Set the gearshift lever to "P" - Put the ignition switch to "ON" - Enter the interface of tire pressure display by DIC - DIC shows "Press Set / Ctrl to re-learn" - Press "Set / Ctrl" - The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode Step 2: Read tire pressure sensor information - Start from the front-left wheel, make the J-46079 or diagnostic Tool EL-50448 antenna up against the valve core position & close to the rim of the tire sidewall - El-50448 tire pressure tool starts by the start switch - Successful to read the tire pressure sensor information when the horn bleeps once Step 3: Same method to read other tire pressure information - Follow the instruction above to read tire pressure of the front-right, rear-right, rear-left wheels. - Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.Specification: General Certificate CE Material Plastic Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 10cm * 3.5cm / 5.91inch * 3.94inch * 1.38inch Qty per Carton 180 Carton Weight 13.40kgs / 29.54lb Carton Size 42cm * 38cm * 48cm / 16.54inch * 14.96inch * 18.9inch Loading Container 20GP: 348 cartons * 180 pcs = 62640 pcs40HQ: 808 cartons * 180 pcs = 145440 pcs
41,00 kr
-
TROS TROS TS-6Drive Potent Booster Electronic Throttle Controller for Honda CRV 2007-2011, For Honda CRV 2007-2011
Product Main Features: 1. Shorten the response speed of the electronic throttle 2. Improve the electronic throttles sensitivity 3. Plug and play without external power supply 4. 6 modes/46 degrees adjustable 5. Full accelerating mode / semi accelerating mode / original accelerator mode / economic mode available 6. It can get into the original car mode while reversing for optional 7. Super bright LED digital display screen, blue / red for optional Product Function: 1. FH mode: Applicable to manual transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of manual full acceleration the sense of weak-to-strong acceleration is extremely evident. 2. FA mode: Applicable to automatic transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of automatic full acceleration the sense of weak-to-strong acceleration is extremely evident. 3. HH mode: Applicable to manual transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of manual semi-acceleration the acceleration effect is slightly poorer than the effect of manual full acceleration. 4. HA mode: Applicable to automatic transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of automatic semi-acceleration the acceleration effect is slightly poorer than the effect of automatic full acceleration. 5. NOR mode: This mode is equivalent to original auto control mode which features balance between sports and comfort. 6. EC mode: This mode delays the response of choker and can achieve economical and environmental-friendly effect.Specification: General Compatible with Honda: CR-V Package Weight One Package Weight 0.33kgs / 0.72lb One Package Size 21cm * 15cm * 5cm / 8.27inch * 5.91inch * 1.97inch Qty per Carton 25 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 25 pcs = 15500 pcs40HQ: 1439 cartons * 25 pcs = 35975 pcs
819,00 kr
-
Waveshare Waveshare 34128 4-Ch GMSL Camera Adapter Board, Equipped With MAX9296 Deserializer, For Raspberry Pi 5, EU Plug, UK Plug, US Plug
1. Support simultaneous connection of up to four GMSL cameras2. Support up to 2 x 8M resolution (3840 x 2160) or 4 x 3M resolution (1920 x 1536) video signals3. Adopt the MAX9296 deserializer solution4. Support synchronous signal connection of cameras via GPIO5. Support Raspberry Pi 5 motherboardParameters1. Demultiplexer: MAXIM (ADI) MAX92962. Supports master control: Raspberry Pi 53. Supports serial converter models: MAX9295, MAX96717 and MAX96705, etc.4. Input: GMSL 1/2 (FAKRA Z connector x 4)5. Output: MIPI CSI (22PIN CSI interface x 2)6. Supported: GMSL camera models: ISX031, etc.7. Power input: 12V/1A (5.5 x 2.1mm)8. Operating temperature: -20°C - 65°CPackaging list:- GMSL-Module-Board-4CH-A x 1- 22-pin FPC connector x 2- Power adapter 12V/2A x 1Specification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 10cm * 10cm * 4cm / 3.94inch * 3.94inch * 1.57inch Qty per Carton 108 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 108 pcs = 56160 pcs40HQ: 1209 cartons * 108 pcs = 130572 pcs
3 672,00 kr
-
WAVESHARE Waveshare SIM7600G-H M.2 4G HAT LTE CAT4 High Speed GNSS Global Band Module for Raspberry Pi, SIM7600G-H M.2 4G HAT
Features1. This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high speed LTE CAT4 global band connection. By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable 4G high speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. 2. Support dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on 3. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position 10. Onboard audio jack and audio decoder, allows audio operation like making phone call 11. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 2. LTE-TDD: B34, B38, B39, B40, B41 3. 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 4. 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz GNSS: 1. Satellite systems: GPS, Beidou, GLONASS, GALILEO, QZSS 2. Receiver type: - 16-channel - C/A Code 3. Sensitivity: - -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) - Cold starts: -148 dBm 4. Time-To-First-Fix (open air): - Cold starts: Less than 35s - Hot starts: Less than 1s SMS and Audio 1. SMS: - Supported types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature: - Support echo cancellation - Support noise reductionPackage List1. M.2 TO 4G/5G HAT x 1 2. SIM7600G-H-M.2 x 1 3. Antenna 2pcs x 1 4. IPEX adapter cable 2pcs x 1 5. 2*20PIN pin header x 1 6. Passive GPS antenna x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 2pcs x 1 11. Screws pack x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 9.80kgs / 21.61lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs
1 215,00 kr
-
WAVESHARE Waveshare Industrial USB to RS485 Converter, 17286
About The ProductOverview 1. This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightningproof, resettable fuse, ESD protection, and TVS diode, etc. It is pretty small in size. 2. The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement. Features 1. USB to RS485 communication 2. Adopt original FT232RL and SP485EEN, fast communicating, stable and reliable, better compatibility 3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic 4. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance 5. 3 LEDs for indicating the power and transceiver status Specifications 1. Product type: Industrial converter 2. Baudrate: 300-921600bps 3. Host port: USB 4. Device port: RS485 5. USB: - Operating voltage: 5V - Connector: USB-A - Protection: 200mA self-recovery fuse, ESD protection - Transmission distance: about 5m 6. RS485: - Connector: screw terminal - Pins: A+, B-, GND - Direction control: hardware automatic control - Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) - Transmission distance: about 1200m (low rate) - Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) 7. LED indicators: - PWR: red power indicator, light up when there is USB connection and voltage is detected - TXD: red TX indicator, light up when the USB port sends data - RXD: red RX indicator, light up when the device ports send data back 8. Operating environment: - Temperature: -15 ~ 70 degree - Humidity: 5%RH ~ 95%RH 9. Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XPPackage List1. USB TO RS485 x 1 2. USB-A male to female cable x 1 3. Screwdriver x 1Specification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 19.00kgs / 41.89lb Carton Size 42cm * 22cm * 22cm / 16.54inch * 8.66inch * 8.66inch Loading Container 20GP: 1311 cartons * 200 pcs = 262200 pcs40HQ: 3045 cartons * 200 pcs = 609000 pcs
164,00 kr
-
i2C i2C T20 Intelligent Motherboard Middle Layered Heating Platform For iPhone X-14 Series, i2C T20 For iPhone X-14 Series
1. T20 AlIntelligent desoldering station, Built-in Al intelligent interactive machine system, automatic recognition of voice dialogue2. The module can be replaced at will with infinite expansion, a segmental hollow-out design, and can increase, reduce, or take out the buckle3. One key separation and fit safety does not burst tin, intelligent temperature control does not hurt the motherboard4. Equipped with 1.28 inch round iPS LCD screen, a built-in cooling fan ten thousand revolution5. Built-in WiFi module, the subsequent single machine can be upgraded6. Support global software remote update7. A heating table that talks and welds, For iPhone X-14 series motherboard can be separated and fitted8. Built-in Al intelligent chip, independently and accurately recognizes voice commands, 0 seconds to read, fast response9. Ambient noise below 30dB, normal voice and speed within 6 meters, quick response10. One key separation and fit, safety does not burst tin, maximum heating, 30 seconds heating, 120 seconds stratification11. Intelligent temperature control, and high-temperature protection, do not hurt the motherboard12. Built-in 5V high-speed hydraulic fan, the turbine has 7 blades to dissipate the heat from strong winds, open the cooling setting, and you can manually set the cooling time13. Segmental hollow-out design, multifunctional 360 rotary press buckle, segmental hollow-out design, can increase, reduce, or take out the buckle, personalized selection according to demand, more flexible and convenient14. Push-pull module self-locking design; module automatically springs up when pressed, power line interface USB computer interfaceSpecification: General Compatible with Apple: iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X Package Weight One Package Weight 1.44kgs / 3.17lb One Package Size 40cm * 30cm * 8cm / 15.75inch * 11.81inch * 3.15inch Qty per Carton 3 Carton Weight 3.96kgs / 8.72lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 3 pcs = 1860 pcs40HQ: 1439 cartons * 3 pcs = 4317 pcs
1 351,00 kr
-