Generic or Third Party Components For DJI FPV Series
-
For DJI FPV Goggles V2 5.8G Analog Receiver Module Adapter Board Video Receiver, 5.8G Analog Receiver Module
1. The 5.8G RX PORT 2.0 is designed to be fixed with the FPV goggles headband ring screw, and is completely non-destructively installed on the side of the DJI goggles, so that you can use Fat Shark or various third-party Fat Shark interface 5.8G receiver systems, Conveniently transfer video and audio signals to the high-quality screen of FPV flying glasses for viewing or recording2. Dimensions: 48 x 28 x 12mm3. Weight: 10g (excluding the adapter cable)4. Power input: 2S-4S (DC5.5 x 2.1)5. Internal voltage: 5V 3A (with pad for output)6. Power output: 2S-4S (DC5.5 x 2.1)7. Signal input: Standard Fat Shark receiver port8. Including third-party receivers: Reaxacc Furious, etc.9. Signal output: standard audio/videoappendix: Adapter mounting block and screw x 1Audio and video cable x 1Power cable x 1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 26.50kgs / 58.42lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs
162,00 kr
-
BETAFPV BETAFPV LiteRadio 4 Radio Transmitter Low-altitude Flight Simulator Controller
Features:1. Ergonomic Portability: Lightweight design provides a comfortable grip for extended training sessions, simulator practice and travel.2. 10-Channel Customization: Two additional tactile switches expand the output to 10 channels, providing flexible control options for drones, robots, drone soccer and fixed-wing aircraft.3. 5D Trim Adjustments: Two dedicated trim switches allow pilots to fine-tune joystick offsets during flight for precise control and quick balancing.4. Advanced Gimbal Sensor: The gimbal features an anti-wear coating for smooth and precise stick movement with improved durability.5. Wireless Simulator Support: Bluetooth joystick mode enables wireless connection to FPV simulators on compatible PCs, mobile devices and tablets.6. Fast Charging Battery: Built-in 1S 2000mAh LiPo battery provides up to 8 hours of runtime at 25mW and supports 15W fast charging, reaching a full charge in approximately 40 minutes.7. Low-Latency Radio Control: Equipped with BETAFPV radio transmission technology and ExpressLRS 2.4G for responsive and reliable control.Specifications:1. Item: LiteRadio 4 Radio Transmitter2. Channels: 103. Color: Gray 4. Gimbal: Potentiometer (Standard Version), Hall Sensor (Twilight Limited Edition)5. RF System: ExpressLRS 2.4G6. RF Output Power: 25mW / 50mW / 100mW (Adjustable)7. Simulator Connection: Bluetooth and USB-C Cable8. Supported Simulators: Most Compatible Simulators and DJI Virtual Flight9. Port: USB-C, Data Transfer and Charging10. Charging Power: 5V, Max. 3A11. Battery: Built-in 1S 2000mAh LiPo Battery12. Battery Life: 4-5 Hours at 100mW or Up to 8 Hours at 25mW13. Weight: Approximately 210g14. Dimensions: 172.5 x 118.5 x 72.5mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 10cm * 1.5cm / 5.91inch * 3.94inch * 0.59inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 32cm * 50cm / 20.47inch * 12.6inch * 19.69inch Loading Container 20GP: 320 cartons * 200 pcs = 64000 pcs40HQ: 744 cartons * 200 pcs = 148800 pcs
767,00 kr
-
DJI Second-hand 90W Charger For DJI FPV Remote Control Goggles Battery Charging, Second-hand 90W Charger
1. It can charge the FPV intelligent flight battery, remote controller and goggles battery at the same time.2. Multiple output interfaces and output modes.3. 90W output power, fast charging.4. Input: 100 - 240 V, 50/60 Hz, 1.8 A5. output:- Battery interface: 25.2 V +/- 0.1 V; 3.57 A +/- 0.1 A (high current gear); 1 A +/- 0.2 A (low current gear)- USB interface: 5V / 2A (two)6. Rated power: 86WWarm Reminder: The charger does not include an AC power cord.Specification: Package Weight One Package Weight 0.49kgs / 1.07lb One Package Size 18cm * 15cm * 6cm / 7.09inch * 5.91inch * 2.36inch Qty per Carton 40 Carton Weight 17.50kgs / 38.58lb Carton Size 62cm * 32cm * 37cm / 24.41inch * 12.6inch * 14.57inch Loading Container 20GP: 363 cartons * 40 pcs = 14520 pcs40HQ: 843 cartons * 40 pcs = 33720 pcs
175,00 kr
-
Sunnylife Sunnylife AT-BHM476 HD Explosion-proof Film Glasses Protector For DJI Goggles 2, Goggles 2 Film
1. High-definition and high-transparency, restore lossless image quality. Let you freely enjoy the immersive flight experience2. Sweat-proof and dust-proof, explosion-proof and scratch-proof. Effective protection of glasses to prevent repeated wearing and the erosion of lenses by sweat and dust3. Thin and flexible, translucent and easy to fit4. For DJI Goggles 25. Nano electrostatic adsorption, no bubbles and easy to fitShipping list:- 4 x protective films- 2 x cleaning kits- 2 x cleaning cloth- 2 x dust-proof stickers- 1 x storage boxSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 7cm * 2cm / 3.94inch * 2.76inch * 0.79inch Qty per Carton 600 Carton Weight 4.20kgs / 9.26lb Carton Size 60cm * 35cm * 40cm / 23.62inch * 13.78inch * 15.75inch Loading Container 20GP: 317 cartons * 600 pcs = 190200 pcs40HQ: 736 cartons * 600 pcs = 441600 pcs
41,00 kr
-
Sunnylife Sunnylife FV-Q9334 2 PCS Myopia Lens Nearsighted Corrective Aspherical Lens for DJI FPV Goggles V2, 100 Degree, 150 Degree, 200 Degree, 250 Degree, 300 Degree, 350 Degree, 400 Degree, 450 Degree, 500 Degree, 550 Degree, 600 Degree, 700 Degree, 800 Degree
1. Choose corrective lenses according to your myopia2. The aspherical resin lens is thinner and more translucent than the spherical lens, the vision is lifelike, and the visual effect is more comfortable3. Aspherical lens can reduce aberration and distortion, and the field of view is clearer and wider4. Frame card position design: does not affect the adjustment of the interpupillary distance at all, and can be adjusted without hindrance5. The thickness of the frame is only 5mm, so you don’t touch your nose or face6. Material: Plastic frame + resin lens7. Net weight: 4g (one pair)Specification: General Compatible with DJI: FPV Goggles V2 Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 10cm * 6cm * 2.5cm / 3.94inch * 2.36inch * 0.98inch Qty per Carton 200 Carton Weight 16.00kgs / 35.27lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 200 pcs = 146800 pcs40HQ: 1705 cartons * 200 pcs = 341000 pcs
175,00 kr
-
Sunnylife Sunnylife TY-X9304 Suitable For DJI Mavic Air 2S / DJI FPV Flight Glasses V2 / Mavic Mini2 / Osmo Pocket 2 Mobile Phone Tablet Cable, 15cm Type-C to 8 Pin Cable, 15cm Type-C to Micro USB Cable, 15cm Type-C to Type-C Cable, 30cm Type-C to 8 Pin Cable ...
1. Length: 15/30 cm2. Weight: 15 cm long about 6 grams, 30 cm long about 8 grams3. Specifications: TYPE-C to 8Pin/TYPE-C to Android/TYPE-C to TYPE-C4. Application: suitable for DJI Mavic Air 2S remote control / FPV flight glasses V2 / Mavic Mini 2 remote control / Mavic Air 2 remote control / Pocket 2 / Osmo Pocket gimbal camera5. Features:The data cable can be stored in the remote control, easy to use, stable connection, fast transmission, clear picture quality6. Note: When using the data cable to connect the phone/tablet and the pocket camera, the original data adapter needs to be removed, otherwise the screen cannot be displayed on the phone7. Note: Only the data cable, without other items in the pictureSpecification: General Compatible with DJI: Mini 2 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 200 Carton Weight 2.80kgs / 6.17lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs40HQ: 2180 cartons * 200 pcs = 436000 pcs
27,00 kr
-
Sunnylife Sunnylife TY-Q9354 For DJI Avata / Mavic 3 / Mini 3 Pro Installation AirTag Locator Bracket
1. Firmly installed, for AirTag can be firmly clamped into the bracket without worrying about falling off2. Strong nano adhesive, super viscous, durable and effective3. Quick installation, can be pasted anywhere4. Wide compatibility and convenient installation5. Tear it off without leaving adhesive, and do not worry about leaving offset prints, which will not damage the UAV surface at all6. Applicable model: for DJI FPV / Avata / Mavic 3 / Mini 3 Pro / Mini 2 / Mavic Air 2 / Mavic Pro / 精灵4 Pro / Mavic Mini / 飞米FIMI X8SE 2020 / Air 2S / Mavic 2, etc7. Material: plastic8. Net weight: 2g9. Gross weight: 4g10. Note: The product only includes the support, not other items of UAVSpecification: General Compatible with DJI: Avata, Mini 3 Pro, Mavic 3, Air 2S, Mini 2, Mavic Air 2, Mavic Mini, FPV, Mavic 2 Pro, Mavic Pro, Phantom 4 Pro Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs
27,00 kr
-
For DJI FPV Goggles V1 V2 Receiver Module 3.0 & 3.0 Plus Mount Holder Protector Case Cover, Receiver Module Mount Holder
1. For DJI FPV Goggles V1 V22. The metal quick-release shell for flight glasses receiver play module3. Can adapt to receiver module 3.0 and 3.0 PLUS with switch4. CNC fine processing, anodizing treatment, quick disassembly and assembly.5. Material: aluminum6. Dimensions: 58 x 36 x 25mm7. Weight: 36 gramsReminder: This product does not contain the red fat shark receiver case, it is for display purposes onlySpecification: General Compatible with DJI: FPV Goggles V2 Package Weight One Package Weight 0.05kgs / 0.10lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs
175,00 kr
-
RCSTQ RCSTQ Thick Anti-lost Anti-fall Neck Strap Holder Lanyard for DJI FPV Remote Control, Thick
1. It adopts nylon and mesh cloth material, which is not easy to draw, and feels good 2. It can be stored when not in use, easy to carry 3. Length adjustment buckle, adjustable length, 61.5-81cm can change as you like 4. Metal hanging buckle, strong, stable and safe 5. Lightweight and portable, easy to carry 6. Weight: 65.2gSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 24cm * 17cm * 2cm / 9.45inch * 6.69inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 200 pcs = 48600 pcs40HQ: 566 cartons * 200 pcs = 113200 pcs
68,00 kr
-
RCSTQ RCSTQ 2 PCS 350 Degree Myopia Glasses Lens Vision Correction Aspherical Lens for DJI FPV Goggles V2, 350 Degree
1. Allow users to wear the FPV Goggles V2 without myopia glasses and eliminates any discomfort. 2. Comfortable even for those who ordinarily wear myopia glasses. 3. Choose the corrective lenses according to your degree of myopia. 4. Aspherical resin lens: Thinner and more translucent than spherical lens, the vision is lifelike, and the visual effect is more comfortable. 5. High-quality professional lenses: Aspheric lenses can reduce aberrations and distortions, and have a clearer and wider field of view. 6. Frame card design: It does not affect the adjustment of the interpupillary distance at all, and the left and right sides can be adjusted without hindrance. 7. The thickness of the frame is only 5mm, so you do not contact your nose and face, and also not block some light.Specification: General Compatible with DJI: FPV Goggles V2 Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 200 Carton Weight 7.80kgs / 17.20lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs
202,00 kr
-
RCSTQ RCSTQ 2 PCS 200 Degree Myopia Glasses Lens Vision Correction Aspherical Lens for DJI FPV Goggles V2, 200 Degree
1. Allow users to wear the FPV Goggles V2 without myopia glasses and eliminates any discomfort. 2. Comfortable even for those who ordinarily wear myopia glasses. 3. Choose the corrective lenses according to your degree of myopia. 4. Aspherical resin lens: Thinner and more translucent than spherical lens, the vision is lifelike, and the visual effect is more comfortable. 5. High-quality professional lenses: Aspheric lenses can reduce aberrations and distortions, and have a clearer and wider field of view. 6. Frame card design: It does not affect the adjustment of the interpupillary distance at all, and the left and right sides can be adjusted without hindrance. 7. The thickness of the frame is only 5mm, so you do not contact your nose and face, and also not block some light.Specification: General Compatible with DJI: FPV Goggles V2 Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs
202,00 kr
-
RUIGPRO RUIGPRO for DJI FPV Portable Single Shoulder Storage Box Case Travel Carrying Bag, For DJI FPV
1. Precisely integrated inner support, shock-absorbing and compressive hard shell design, can accommodate a full set of accessories 2. The middle separator can protect the drone and accessories, and can store small accessories at the same time 3. Can be hand-held, single-shoulder or cross-body, with anti-slip design on the shoulder 4. The upper cover mesh bag can store small accessories as well as tablets, mobile phones, easy to carry out 5. Shock absorption and waterproof performance, effectively protect your equipment from normal scratches, dirt, tears and wearSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.54kgs / 1.20lb One Package Size 36cm * 28cm * 12cm / 14.17inch * 11.02inch * 4.72inch Qty per Carton 10 Carton Weight 6.50kgs / 14.33lb Carton Size 62cm * 55cm * 38cm / 24.41inch * 21.65inch * 14.96inch Loading Container 20GP: 205 cartons * 10 pcs = 2050 pcs40HQ: 477 cartons * 10 pcs = 4770 pcs
215,00 kr
-
FPV-TDDCH-CQT Battery Charging Clip Bracket Holder for DJI FPV Goggles V2, Battery Bracket
1. The bracket is designed for DJI FPV Goggles V2 battery, fix the battery well and is installed on the headband of goggles. 2. This clip of Battery can be fixed on the headband of goggles V2, good way to charge your goggles and increase your playing time if you have another charging cable and battery as backup. 3. This bracket is ultra portable, easy to install and uninstall, will give you better flying experience. 4. Made of plastic material, durable to use 5. Small size, light weight, easy to carrySpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 6cm * 2.5cm / 3.94inch * 2.36inch * 0.98inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 52cm * 32cm * 42cm / 20.47inch * 12.6inch * 16.54inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs
54,00 kr
-
Safety Hand Strap Hanging Wrist Strap Lanyard For DJI FPV Remote Control
Features: 1. Widened neck design, comfortable and labor-saving; 2. Enlarged and bold hanging buckle, strong and durable; 3. It has strong practicability. 4. Prevent the remote control from falling, safe and stable. 5. Portable and durable, easy to disassemble. parameter: 1. Color: black 2. Length: 53-70cm, adjustable 3. Neck width: 5.2cm 4. Product weight: about 70 gramsSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 35cm * 6cm * 3cm / 13.78inch * 2.36inch * 1.18inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 62cm * 42cm * 36cm / 24.41inch * 16.54inch * 14.17inch Loading Container 20GP: 284 cartons * 100 pcs = 28400 pcs40HQ: 660 cartons * 100 pcs = 66000 pcs
54,00 kr
-
For DJI FPV Combo Backpack Storage Box Shockproof Wear-resistant Splash-proof Nylon Cloth Bag Handbag, Splash-proof Bag
1. Ideal for travel or home storage, built in carry handle and comfortable shoulder strap to keep your drone secure 2. Large capacity, very useful and convenient to use.Durable wear resistant and strong enough.Precut foam secures everything in place, protects against scratches, jostles and drops. 3. Adjustable shoulder strap and a side handle to conveniently carry case by two ways. Adjustable padded shoulder strap design can relieve pressure on your shoulders. 4. Each part has a separate interior space.With strong high density foam to keep your quadcopter secure.Will not crush your drone , protected your stabilization well. 5. Multi-functional, can be used as a normal storage shoulder bag on the go Specifications: 1. Material: EVA+Nylon 2. Color: Black 5. Compatible With: For DJI FPV Combo 4. Size: 290 x 170 x 390 mm 5. Weight: 996gSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.71kgs / 1.57lb One Package Size 40cm * 30cm * 18cm / 15.75inch * 11.81inch * 7.09inch Qty per Carton 4 Carton Weight 2.40kgs / 5.28lb Carton Size 42cm * 62cm * 38cm / 16.54inch * 24.41inch * 14.96inch Loading Container 20GP: 269 cartons * 4 pcs = 1076 pcs40HQ: 625 cartons * 4 pcs = 2500 pcs
202,00 kr
-
For DJI FPV Drone ESC Cooling Rack Repair Parts, ESC Cooling Rack
1. Made of aluminum alloy material, durable and long service life.2. Simple design, light and compact, easy to carry and use, convenient and practical.3. Repair the ESC cooling rack, you can directly replace the old or damaged parts.4. Fine workmanship, good performance stability and high reliability.5. Suitable for DJI FPV aircraft.6. Repair parts are used for accidental damage and replacement, making maintenance more at ease.Specification: General Compatible with DJI: FPV Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 8.50kgs / 18.74lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs
81,00 kr
-
for DJI FPV Gimbal Camera Component Module, for DJI FPV Camera
1. Material: ABS2. For DJI FPV3. Made of high quality material, reliable and durable4. Maintenance parts, used for accidental damage replacement, making maintenance more worry-free5. Long service life and easy installation6. Use the gimbal camera with the drone to record video at up to 4K/60fps, RockSteady EIS and 4x slow motion7. Net weight: 32.3 grams8. Product size: 5.2x4.5x3 cmSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 12cm * 8cm * 4cm / 4.72inch * 3.15inch * 1.57inch Qty per Carton 500 Carton Weight 18.50kgs / 40.79lb Carton Size 50cm * 50cm * 37cm / 19.69inch * 19.69inch * 14.57inch Loading Container 20GP: 288 cartons * 500 pcs = 144000 pcs40HQ: 669 cartons * 500 pcs = 334500 pcs
847,00 kr
-
For DJI FPV Vision Bracket Assembly Without Glass Drone Repair Parts, Vision Bracket
1. Compatible models: suitable for DJI FPV drones2. Replace damaged or unusable ones with new ones3. Easy-to-install replacement parts4. Every item has been inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department6. Note: The drone lens is not included in the shipmentSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs40HQ: 412 cartons * 468 pcs = 192816 pcs
578,00 kr
-
For DJI FPV Drone ESC Board Replacement Spare Parts, ESC Board
1. Fits and works perfectly2. Healthy and environmentally friendly materials, long service life3. Suitable for DJI FPV drone4. Every item has been checked and in good condition before shipping5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair departmentSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs
417,00 kr
-
JSR JSR KS 4 in 1 ND4+ND8+ND16+ND32 Lens Filter for DJI FPV, Aluminum Alloy Frame, 4 in 1 ND
1. Protect your expensive lens from dust and scratch while not lowing your photo quality. 2. Significantly reduce lens flare and ghosting while making the filter anti-scratch, reduce reflection, increase surface durability, water resistant, oil & dust resistant. 3. ND filters washed out photos & video due to bright sunlight for better contrast & rich color. 4. Portable and durable, easy to install. 5. Lightweight, high transmittance and low reflectivity. 6. Note: Only include 4 x ND lens filters.Specification: General Compatible with DJI: FPV Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 9.80kgs / 21.61lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs40HQ: 1162 cartons * 200 pcs = 232400 pcs
310,00 kr
-
Waterproof Backpack Shoulders Turtle Hard Case Storage Box Outdoor Travel Bag for DJI FPV, For DJI FPV (Metallic Grey)
1. Made Of High-density PC. Double EVA sponge and hardshell secures everything in place, protects against scratches, jostles and drops. 2. The PC hard shell is used in the front, and the water-repellent nylon cloth is used in the back. If you encounter heavy rain in the wild, you do not worry about the drone get wet.great perfectly to protection your UAV does not suffer any damage . 3. Shock absorption and compression resistance, effectively protect your equipment from normal scratches, dirt, tears and wear 4. Large capacity: Can additional store 2pcs of battery (1pc on drone body) + RC drone + remote controller + Goggles V2 + charger + Cables + Propellers 5. Ideal for travel or home storage, built in carry handle and comfortable shoulder strap to keep your drone secure Multiple storage compartments and an attractive design. Keep your drone and accessories organized, safe from scratches and dust. Water resistant protects from short-term exposure to water and extreme weather phenomena. 6. Size: 46x14x34cm 7. Weight: 1.65kgSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 2.10kgs / 4.63lb One Package Size 48cm * 37cm * 18cm / 18.9inch * 14.57inch * 7.09inch Qty per Carton 4 Carton Weight 9.00kgs / 19.84lb Carton Size 75cm * 48cm * 37cm / 29.53inch * 18.9inch * 14.57inch Loading Container 20GP: 200 cartons * 4 pcs = 800 pcs40HQ: 464 cartons * 4 pcs = 1856 pcs
363,00 kr
-
STARTRC STARTRC 1109143 50cm Portable Drone Universal Foldable Square Parking Apron Landing Pad for DJI FPV / mini 2 / Air 2, 50cm
1. Foldable design, convenient storage, easy to carry out2. PU leather fabric, waterproof and antifouling3. The four eyelet buttons can be freely combined and fixed when flying outdoors to increase the fun of flying4. Basically common to all types of drones5. Material: PU leather + glass fiber6. Packing list: apron*1, storage bag*1Specification: General Compatible with DJI: Air 2S, Mini 2, Mavic Air 2, FPV Package Weight One Package Weight 0.61kgs / 1.34lb One Package Size 27cm * 19cm * 3cm / 10.63inch * 7.48inch * 1.18inch Qty per Carton 20 Carton Weight 12.40kgs / 27.34lb Carton Size 27cm * 38cm * 30cm / 10.63inch * 14.96inch * 11.81inch Loading Container 20GP: 866 cartons * 20 pcs = 17320 pcs40HQ: 2011 cartons * 20 pcs = 40220 pcs
162,00 kr
-
JUNESTAR Drone Filters For DJI FPV COMBO ,Model:, MCUV, CPL, ND4, ND8, ND16, ND32, ND64, ND8PL, ND16PL, ND32PL, ND64PL, Night, Star, CPL+ND8+ND16, ND4+ND8+ND16+ND32, ND8/16/32/64PL, UV+CPL+ND4/8/16/32, UV+CPL+ND8/16/32/64+STAR+Night
1. Using SCHOTT optical glass, precision grinding, high-definition imaging2. Double-sided super waterproof coating, anti-fouling and scratch-resistant, effective protection3. UV protection lens: used for shooting in the seaside, mountains, snowfields and open spaces, etc., it can reduce the blue tone caused by ultraviolet rays, and can also eliminate the interference of ultraviolet rays on the CCD4. CPL: mainly used to eliminate harmful non-metallic reflected light, increase color density, improve the clarity and expressiveness of the picture5. ND filter: prevent overexposure in strong light environment and resist scattered light6. NDPL: Combines the advantages of ND light reduction and PL polarizer, eliminates reflections, enhances contrast, and makes the picture more three-dimensional7. Anti-light pollution filter (Night): Effectively reduce light pollution and make the picture show true color8. Star: There will be a starburst effect when shooting where the light is brighter9. Material: frame lightweight aluminum + optical glassSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 7cm * 8cm * 2cm / 2.76inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 33cm * 36cm / 16.54inch * 12.99inch * 14.17inch Loading Container 20GP: 534 cartons * 400 pcs = 213600 pcs40HQ: 1240 cartons * 400 pcs = 496000 pcs
81,00 kr - 753,00 kr
-
STARTRC RCSTQ Two-color Retractable Thumb Rocker Joystick for DJI FPV Combo Drone Remote Control, For DJI FPV Two-color
1. Aluminum alloy material, sturdy and durable 2. Process: Anodizing and coloring process to use 3. Ergonomic design, knurled anti-slip, comfortable 4. Stored in the remote control like the original joystick 5. Design for DJI FPV, quick disassembly and easy installation 6. Size: 2.4x0.9x0.9cm 7. Weight: 4.7gSpecification: General Compatible with DJI: FPV Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 6cm * 3cm / 2.36inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 32cm * 35cm * 25cm / 12.6inch * 13.78inch * 9.84inch Loading Container 20GP: 952 cartons * 200 pcs = 190400 pcs40HQ: 2210 cartons * 200 pcs = 442000 pcs
81,00 kr
You have seen 24 out of 33 products