Search results for "electronics tester"

1. Display: 1.77-inch TFT (160x128 DPI)2. External power supply: 12 or 24V power supply is provided through the vehicle battery3. It has short circuit protection function. If the load is too large, its internal circuit breaker will tripThis circuit breaker is not only a useful test tool, but also a safety measure to protect the tool from overload damage.4. When the circuit breaker trips, all other functions of the tool are still in normal working state, which means you can still detect the circuit and observe the voltage readings. When the circuit breaker trips, the tool cannot conduct battery current to the probe even if the power switch is pressed. Intentionally tripping the circuit breaker and using the tool for detection can be considered an additional precaution to prevent accidental pressing of the power switch.5. There are four modes for diagnosing electrical systems, which can be entered by pressing the "Mode Button" and switching in turn.6. DC voltage: When using this tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the DC voltage value with an accuracy of 0.1V7. AC voltage: When using the tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the voltage and frequency.8. Resistance Test: When using this tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the resistance value between the tip and the auxiliary ground wire.9. Diode: In this mode, the probe tip contacts the positive electrode of the diode, connects the auxiliary ground wire to the negative electrode of the diode, the screen will display a forward voltage drop, indicating a forward bias. If the position of the probe tip and auxiliary ground wire are exchanged, the screen will not display a voltage, indicating a reverse bias.Voltage and Polarity Test: When the tool is in DC voltage mode, contact the probe tip with the forward circuit, the red LED will light up, the LCD display will display the voltage, the resolution is 0.1V, and a beep will sound10. If the probe tip is contacted with the negative circuit, the green LED will light up, the LCD display will display the voltage, the resolution is also 0.1V, and a beep will sound. If the probe tip is contacted with the open circuit circuit, neither LED will light up.11. Continuity Test: When the tool is in resistive mode, the probe tip is used to connect to the body ground wire or auxiliary ground wire, and conductivity tests can be performed on the wires and components that connect or disconnect the vehicles electrical system.12. When the probe tip is in contact with good grounding, the LCD display will display "0.0Ω" and the green LED will light up, making a beep sound. In other cases, the LCD display will only display the resistance value.13. If the resistance value is greater than 100 kiloohms, the LCD display will display "0L"14. Size: 225x45x35 mmSpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 28cm * 13cm * 6cm / 11.02inch * 5.12inch * 2.36inch Qty per Carton 10 Carton Weight 5.60kgs / 12.35lb Carton Size 30cm * 28cm * 32cm / 11.81inch * 11.02inch * 12.6inch Loading Container 20GP: 992 cartons * 10 pcs = 9920 pcs40HQ: 2303 cartons * 10 pcs = 23030 pcs

Read more less

Feature:1. It can test electric field strength and magnetic field strength to reach the optimal test result. Its widely used to test and learn electromagnetic radiation situation indoor and outdoor. Suitable to measure the electro-magnetic generated machine, measure low frequency appliance and high frequency radiation appliance.2. One instrument with two uses, it can test the electric field and the magnetic field radiation at the same time.2. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically.3. Data locking, one-key lock of the radiation value and easily read the value.4. Measure the Environment Temperature: with 2 temperature units (Celsius and Fahrenheit).5. Radiation assessment, remind you whether the radiation value is safe or not.6. Fashionable design, easy on-hand operation, its easy to carry and make field measurement.Specifications:1. Material: ABS Plastic2. Unit: V/m (Electric Field), micro T / mG(Magnetic Field)3. Accuracy: Electric: 1V/m, Magnetic: 0.01 micro T / 0.1mG4. Range: Electric: 1-1999V/m, Magnetic: 0.01-99.99 micro T / 0.1-999.9mG5. Alarm Threshold: Electric: 40V/m, Magnetic: 0.4 micro T/4mG6. Display: 3-1/2 LCD display7. Test Bandwidth: 5Hz-3500MHz8. Sampling Time: about 0.4 Seconds9. Test Mode: Bimodule Synchronous Test10. Overload Indication: Max value of measurement range on LCD11. Operating Temperature: 0-50 Celsius degree12. Operating Humidity: relative Humidity less than 80%13. Working Voltage: 3.7V14. Power Supply: 3.7V 600mAh lithium battery15. Size: 134 x 61 x 25mm 16. Weight: 131.3gSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 18cm * 12cm * 6cm / 7.09inch * 4.72inch * 2.36inch Qty per Carton 60 Carton Weight 16.50kgs / 36.38lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 60 pcs = 20880 pcs40HQ: 808 cartons * 60 pcs = 48480 pcs

Read more less

1. Detects three types of radiofrequency radiation (RF): WIFI/PHONE (WIFI radiation), MICROWAVE (microwave radiation), MIXED (mixed electromagnetic radiation)2. Detects three types of non-ionizing radiation: Electric Field (EF), Magnetic Field (MF), Radio Frequency (RF)3. USB rechargeable with built-in high-capacity lithium battery for extended runtime4. Three-color backlight and bar graph alerts provide additional visual assessment of radiation intensity alongside numerical readings5. Auto-shutdown after 15 minutes of inactivity6. Versatile applications: suitable for TVs, computers, home appliances, substations, mobile phones, base stations, etcSpecifications1. Measurement accuracy: ±5%2. Measurement bandwidth: 40Hz-10GHz3. Auto-off: default 15 minutes, can be disabled4. Operating temperature/humidity: temperature: -10 to +60°C; humidity: less than 80% RH5. Battery capacity: 320mAh6. Charging: 5V 500mA7. Charging port: Type-C8. Size: about 14.4 x 6.7 x 2.7cm9. Weight: about 140gSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 18cm * 10cm * 6cm / 7.09inch * 3.94inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 40 pcs = 20880 pcs40HQ: 1212 cartons * 40 pcs = 48480 pcs

Read more less

1. It is mainly used for testing the DC parameters of manifold semiconductors such as diode, transistor, controlled silicon and field effect transistor.It also can be used to test the with stand voltage of capacitor, protection voltage of varistor and isolation of electrica. 2. Measuring forward voltage, reverse voltage, forward saturation voltage drop, amplification factor, reverse leakage current of various crystal diode, audion, silicon controlled rectifier(SCR), field effect transistor(FET). 3. Measuring rated working voltage of chemical capacitor, terylene capacitor, capacitor, Leaded multilayer ceramic capacitor, high voltage lacker. 4. Measuring protection voltage of varistor. 5. Data hold, low battery warning.Specification: Package Weight One Package Weight 0.74kgs / 1.63lb One Package Size 26cm * 15cm * 7cm / 10.24inch * 5.91inch * 2.76inch Qty per Carton 30 Carton Weight 25.65kgs / 56.55lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 30 pcs = 10440 pcs40HQ: 808 cartons * 30 pcs = 24240 pcs

Read more less

1. Uses: Electrician testing and maintenance, household multi-function test pen multi-purpose set2. 18-in-1 multifunctional combination line, suitable for various multimeters3. Maximum current and voltage: 10A / 1000V4. Bus length 930 mm5. Caliber: 3.5 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 18cm * 12cm * 10cm / 7.09inch * 4.72inch * 3.94inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. Determine at a glance whether the circuit is positive, negative without having to reconnect the clips from one battery post to the other.2. Use the built-in auxiliary ground lead to test for continuity.3. Press the power switch to drive a positive or negative battery current to the probe tip to test the functionality of electrical components without using jumper cables.4. Immediately test for incorrect ground contact without a voltage drop test. The tool is also short-circuit protected; your internal circuit breaker will trip if overloaded.5. Trace and locate the short without losing the fuse. The tools 20-foot cable allows you to test along the entire length of the vehicle without the constant search for a suitable vehicle ground point.6. Perform various types of services including power injection, metering, grounding tests, polarity checks, continuity tests and component activation.7. Easy-to-read multimeter allows you to easily read voltage, current and resistance8. Integrated flashlight lets you work in the darkSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 23cm * 15cm * 10cm / 9.06inch * 5.91inch * 3.94inch Qty per Carton 60 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs40HQ: 412 cartons * 60 pcs = 24720 pcs

Read more less

1. Ground resistance Re (Rg when testing soil resistivity p)2. Range: 2 ohms/20 ohms/200 ohms/2000 ohms3. Test range: 0.03~2.000 ohms/0.03~20.00 ohms/0.03~200.0 ohms/0.03~2000 ohms4. Voltage to ground (AC voltage): 600V Test range 0~600Vac5. Photovoltaic voltage (DC voltage): 1500V Test range: 0~1500Vac6. Test method: voltage drop method (applicable to the current and voltage test of the probe)7. Display: segment LCD display, display backlight8. Battery voltage warning: Battery logo display9. Continuous test times: In the 2 ohm range, test once every 30 seconds with a 1 ohm load, and can be repeated more than 400 times10. Input exceeds display: Display "OL"11. Automatic shutdown function: If there is no operation for 5 minutes after the key operation, the system will enter the automatic shutdown state12. Overload protection: AC280V/10 seconds between E-S ports13. Withstand voltage: AC3540V (50/60Hz)/5 seconds between the electrical circuit and the outer box14. Insulation resistance: 50 milliohms or more between the electrical circuit and the outer box/DC 1000V15. Power supply: 6 AA batteries (not included)16. When testing the ground resistance and soil resistivity, the series interference voltage will be automatically tested synchronously, and a prompt will be given if there is an abnormal test result17. High-definition display, clear reading, easy measurement18. Multiple gear selection, can be adjusted according to different needs19. Applicable to measurement in power, post and telecommunications, railway, petroleum, chemical, communication, mining and other departments20. Dimensions: 173x125x68mmPacking list:- DY4100A instrument x 1- Cloth bag x 1- Instruction manual x 1- Certificate x 1- Test line x 1 (red 15m/yellow 10m/green 5m)- Multimeter pen x 1- Ground rod x 2Specification: Package Weight One Package Weight 2.20kgs / 4.86lb One Package Size 26cm * 23cm * 14cm / 10.24inch * 9.06inch * 5.51inch Qty per Carton 2 Carton Weight 5.50kgs / 12.13lb Carton Size 28cm * 25cm * 30cm / 11.02inch * 9.84inch * 11.81inch Loading Container 20GP: 1269 cartons * 2 pcs = 2538 pcs40HQ: 2947 cartons * 2 pcs = 5894 pcs

Read more less

1. Easy to check ATX, BTX or ITX power supply 2. Voltage source: 20 / 24 Pin (ATX-connector) 3. Voltage test: +12V, -12V, +5V, -5V, +3.3V, 5V stand by (SB), 12V power Good (PG) 4. Connectors: Floppy, HDD, CDROM, SATA, 4 Pin (P4), 8 Pin (Dual-CPU), 6 Pin (PCI-Express) 5. Plug power supply 24 Pin and P4, P6 or P8 into the corresponding jacks of the power supply tester 6. Turn on the tester, you will hear "DuDu" sound, if there are no flashing numbers then the power supply functions normally 7. If a certain voltage signal is not detected or voltage is out of normal range, the buzzer will make long "DuDu" sound and corresponding voltage or PG value is flashing, then the power supply is failedSpecification: General Material Plastic, Metal Size 12*6.5*1.9cm Weight 75g Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 21.9cm * 10.3cm * 2cm / 8.62inch * 4.06inch * 0.79inch Qty per Carton 90 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 33cm * 32cm / 18.11inch * 12.99inch * 12.6inch Loading Container 20GP: 548 cartons * 90 pcs = 49320 pcs40HQ: 1274 cartons * 90 pcs = 114660 pcs

Read more less

1. Radio frequency detection: Wireless, Bluetooth, radio equipment, 5G signals and radio frequency2. Three types of alarm prompts: sound, light and display. The large screen is clearer and more understandable3. Built-in high-precision electromagnetic radiation sensor. The micro-control chip processor can quickly and accurately measure the electromagnetic radiation value4. Wear-resistant felt, protecting the machine5. Anti-slip design, not easy to fall off6. Comfortable touch, soft rubber buttons Parameters:1. Sensitivity: EF (Electric Field): 1V/m; MF (Magnetic Field): 0.1mG or 0.01u; TRF (Radio Frequency): 0.01mW/square meter2. Measurement range: EF: 1 - 1999V/m; MF: 0.1 - 999.9mG or 0.01 - 99.99uT; RF: 0.01 - 19.99mW/square meter3. Measurement accuracy: ±5%4. Measurement bandwidth: 50Hz - 3500MHz5. Automatic shutdown: default 15 minutes, can be disabled6. Operating temperature and humidity: -10 - +60℃; humidity: Less than 80%RH7. Power supply method: 1 battery of 9V (not included)8. Size: about 14.7 x 6.85 x 2.8cm9. Weight: about 132gSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 17cm * 9cm * 5cm / 6.69inch * 3.54inch * 1.97inch Qty per Carton 60 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 36cm * 32cm / 18.5inch * 14.17inch * 12.6inch Loading Container 20GP: 492 cartons * 60 pcs = 29520 pcs40HQ: 1143 cartons * 60 pcs = 68580 pcs

Read more less

1. One machine with dual use, can test electric and magnetic field radiation at the same time 2. Sound and light alarm, when the detection result exceeds the safe value, the instrument will automatically alarm 3. Data lock, one-key lock of radiation value 4. LCD graphic display radiation value trend 5. Radiation assessment, remind you whether the radiation value is safe 6. Stylish design, easy to operate, it is easy to move or perform on-site measurement 7. Can test electric field radiation and magnetic field emission to achieve good test results 8. Used to test and study indoor and outdoor electromagnetic radiation 9. Built-in electromagnetic radiation sensor, after processing by the control microchip, the radiation value can be displayed on the LCD digital display. You can deal with electromagnetic radiation reasonably or take effective preventive measures based on the test results 10. Test bandwidth: 5Hza??3500MHz 11. Sampling time: about 0.4 seconds 12. Working temperature: 0-50 degrees Celsius 13. Operating humidity: relative humidity is less than 80% 14. Working voltage: 9V 15. Power supply: 6F22 9V battery 16. Size: 63.6x31x125.8mm 17. Weight: 146gSpecification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 18cm * 13cm * 6cm / 7.09inch * 5.12inch * 2.36inch Qty per Carton 60 Carton Weight 17.04kgs / 37.57lb Carton Size 57cm * 40cm * 45cm / 22.44inch * 15.75inch * 17.72inch Loading Container 20GP: 259 cartons * 60 pcs = 15540 pcs40HQ: 603 cartons * 60 pcs = 36180 pcs

Read more less

1. Power supply: 9V battery (not included)2. Compatible with a variety of circuits between 6-42V DC, including cars, trucks, tractors, boats, RVs, etc., with a wide operating voltage range for a variety of applications3. Equipped with an adjustable 7-inch flexible probe, providing flexibility to reach difficult areas4. The receivers probe is constructed of rolled steel and can be bent as needed to access wires in crowded or challenging spaces5. Depending on the characteristics of the circuit and the sensitivity setting, the probe will detect signals from wires in different locations6. Place the receivers probe tip (black cap) vertically (90 degrees) above or below the wire being traced7. Easy to use, simply place the transmitter in series with the circuit or wire being tested (ie: in place of a blown fuse, through a connector, in series with an open wire, light bulb socket, etc.) and use the tracer flexible probe to scan the circuit/wire to find the fault point8. Allows you to identify intermittent circuit problems by bending the wire or connector and listening for changes in the receivers tone9. Open wire detector instantly detects and alerts you to open circuits, easily locates shorts, broken wires, disconnects, current leakage and traces wires, sends and receives LEDs to indicate open or short circuit conditions10. Powered by 2 9V batteries, easily locates breaker points, open connections, broken wires, current leakage with tone changes, and even traces wires/cables without damaging insulationSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 28cm * 16cm * 6cm / 11.02inch * 6.3inch * 2.36inch Qty per Carton 10 Carton Weight 4.10kgs / 9.04lb Carton Size 30cm * 34cm * 32cm / 11.81inch * 13.39inch * 12.6inch Loading Container 20GP: 816 cartons * 10 pcs = 8160 pcs40HQ: 1896 cartons * 10 pcs = 18960 pcs

Read more less

1. Display: 2.4-inch TFT colour screen, LED backlighting2. Supply voltage: built-in 1500mAh rechargeable lithium battery3. Charging specification: USB Type-C, +5V4. Product volume: 79x103x31mm5. Real-time sampling rate: 10MSa / s6. Analogue bandwidth: 500Khz7. Input impedance: 1 milliohm8. Coupling method: AC/DC9. Test voltage range: 400V10. Vertical sensitivity: 10mV-10V11. Horizontal time base range: 1us-10s12. Trigger mode automatic: normal single13. Trigger type: rising edge/falling edge14. Compact body, simple modelling, easy to use, to meet the measurement routine15. Automatic identification and measurement of various transistors, including NPN and PNP transistors, N-channel and P-channel FETs, junction FETs, diodes, dual-diode thyristors, etc., as well as resistors, inductors, capacitors and other passive components16. Built-in 1500mAh high-capacity lithium battery, power supply continuous operation without isolation transformer, safer to use17. 2.4-inch anti-see-through high-resolution display, allowing you to read clearly even in bright sunlight18. One-piece folding, placed in a stable support, does not take up space19. Size: 79x103x31mmStandard:- DSO-TC3 Tester x 1-Type-C charging cable x 1-Common probe x 1-Test Hook x 3Upgrade:-DSO-TC3 Tester x 1-Adaptor x 1-P6100 High Voltage Probe x 1-Type-C charging cable x 1-Normal Probe x 1-Test Hook x 1Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 13cm * 18cm * 6cm / 5.12inch * 7.09inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 64cm * 32cm * 31cm / 25.2inch * 12.6inch * 12.2inch Loading Container 20GP: 420 cartons * 50 pcs = 21000 pcs40HQ: 975 cartons * 50 pcs = 48750 pcs

Read more less