Search results for "indoor sensor"
-
4 in 1 Door Magnet Refrigerator Delayed Door Closing Bell Anti-theft Alarm (3V)
Specifications1. Alarm: 108 decibels 2. Delay time upgraded to: 3/15/30/60 seconds, default delay 15 seconds 3. Prompt sound upgraded: drip-drop prompt is slower, not noisy and harsh 4. After canceling the trigger, there will be a beep prompt, silent protection, and prompt after delay 5. The host has two No. 7 batteries, and the battery is not delivered 6. General alarm: When the door or window is opened, the alarm sound will be issued immediately 7. Door closing alarm: If the door has been opened for 15 seconds (15 seconds is the factory default value, 3 seconds/15 seconds/30 seconds/60 seconds according to your choice), the alarm will continue to sound until the door is closed 8. Doorbell mode: a "ding-dong" sound is emitted when the door is opened 9. When the battery is low, the LED flashes once per second and a "BiBi" sound is emitted twice every 30 minutes to remind you to replace the battery 10. Easy to install and easy to set up, fix the magnetic bar within 1cm next to the magnetic sensor, use double-sided tape to keep the two alignment arrows opposite 11. Size: 85x43mm, magnetic bar 45x10mmInstallationBattery Installation: 1. Open the battery door, and loaded two AAA alkaline batteries. 2. When the battery after you install the unit will sound one long, one short a??Bea?|Bea?? Prompt the battery to a successful installation: 1. Please use alkaline batteries in order to get good use of effects, such as the use of other batteries can cause the battery use shorter or alarm sound. Installation: 1. Select windows and doors installation location, with water and a rag clear clean the mounting surface, the double-sided adhesive tape on the bottom and then the unit attached to the clean position. 2. Installed host, and then double-sided paste the magnet solid set in the host next to the door or door frame, pay attention please the magnets arrow at the arrow to the right host.Notes1. The machine is for indoor use, do not install in direct sunlight or rain, do not install in the region of high pollution or high humidity. 2. The magnetic sensor of the machine on the right side of the bodya??s mount the magnet in the right side of the machine and align the two arrows. 3. If the host is installed on the door, install the magnet on the door frame, turn, if the host is installed on the door frame should be a magnet mounted on the door, to ensure that the door is open magnet to leave the host to detect. 4. Ensure close the door the host and the magnet installation distance should not exceed 10mm.UseChange your password (first time or replace the battery, do the following to change the password) 1. Make sure the unit is not alert (flashing LED every three seconds in the garrison state once). 2. Press "1" key more than 2 seconds, the machine will beep 1 short "Be", and the LED flashes prompted to enter the password to change the status. 3. Enter the old four-digit PIN (for the first time, to change the password please enter the factory default password "1234"), the machine prompts two short sound of "Be...Be", then enter the new four-digit PIN , the machine will ring three times "the Be...Be...Be" mention show the password change, please remember the new password. 4. Error in the process of enter a password, the machine will ring long and Du...", please repeat "5.3.1.2~5.3.1.3." 5. Keep the battery when you forget your password split out two minutes after installing the battery the unit will restore the factory default password "1234". 6. After replacing the battery password will be restored to factory settings, change your password, please click on the above-mention operation.SettingEnter the delay time setting: 1. Native in the police state, the door was opened to the alarm there is some delay, this delay is used to input to the user to lift the machine into the password, factory setting is 3 seconds, when you first use based on your actual use of the situation set up this time, 2. Make sure the unit is not alert (security status LED flashes every three seconds). 3. More than two seconds. "2"key, the machine will beep 1 short "Be", and the LED flashes, suggesting that the delay to change the satus. 4. Then "1" key once, the machine will ring three times"Be...Be..ãBe" prompt delay is changed to 0 seconds, the doors open alarm immediately, if you press the "2" key to change the delay for 3 seconds, "3" key to change the delay for five seconds, "4" key the delay is changed to 10 seconds. 5. Based on your intended use and operation of proficiency set this delay time. 6. When replacing the battery, please re-set the delay time, Arming and disarming: 1. In standby mode, press ON/OFF button once, the machine will ring three times "of Bi of Bi of Bi" prompts the machine to enter the armed mode 15 seconds after the alert status and the LED will flash once every three seconds. 2. In the deployed state, enter the four personal password and then press the ON/OFF key, the unit will beep "of Bi..." sound prompts the machine had to withdraw from the deployment mode in this mode, the machine does not prompt outside of any function in addition to low power. 3. Alarm is triggered 4. Detected in the deployed status, such as the door changed to open the actionSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 6cm * 5cm / 3.94inch * 2.36inch * 1.97inch Qty per Carton 150 Carton Weight 7.80kgs / 17.20lb Carton Size 41cm * 28cm * 31cm / 16.14inch * 11.02inch * 12.2inch Loading Container 20GP: 749 cartons * 150 pcs = 112350 pcs40HQ: 1739 cartons * 150 pcs = 260850 pcs
55,00 kr
-
Indoor Temperature Humidity Air Quality Detector, 1308B
1. Material: ABS2. Accurate measurement3. Clear reading4. Applicable scene: Indoor5. Stable performance, strong anti-interference ability, low consumption6. Function: Measure CO2/HCHO/TVOC, temperature and humidity7. The ventilation holes accelerate the convection between the air and the machine, which enables effective detection, and also provides good heat dissipation8. Unit weight: 0.185kgSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 17.20kgs / 37.92lb Carton Size 52cm * 42cm * 30cm / 20.47inch * 16.54inch * 11.81inch Loading Container 20GP: 407 cartons * 80 pcs = 32560 pcs40HQ: 944 cartons * 80 pcs = 75520 pcs
503,00 kr
-
SS-168 First Alert Battery-Operated Fire Smoke Alarm Detector
1. Size: 107*35mm 2. The shell is made of ABS fire-proof material and its sensitivity meets UL217 standard. 3. Working Voltage: DC9V 1*6F22 Battery 4. Alarm mode: acousto-optic alarm 5. Suitable for indoor families, dance halls, warehouses, etc. Test methods: 1. Button test method. Press the test button on the smoke sensor directly. After a few seconds, the alarm will be sent out directly. 2. Smoke test. Smoke is sprayed through the hole of the smoke sensor. Smoke should not be too thin. After a while, the light on the smoke sensor will start to flicker, and after a while, an alarm will be issuedSpecification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 10.7cm * 3.5cm * 5cm / 4.21inch * 1.38inch * 1.97inch Qty per Carton 200 Carton Weight 29.00kgs / 63.93lb Carton Size 42cm * 30cm * 30cm / 16.54inch * 11.81inch * 11.81inch Loading Container 20GP: 705 cartons * 200 pcs = 141000 pcs40HQ: 1637 cartons * 200 pcs = 327400 pcs
28,00 kr
-
5-in-1 Indoor Home Portable Air Monitor TVOC Formaldehyde Detector, 5-in-1(White), 5-in-1(Light Gray)
1. Measuring range: 400-50002. Measurement accuracy: 5PPM3. Measurement objects:W17 (carbon monoxide + carbon dioxide + formaldehyde + air quality + chemical pollutants)W17A (carbon monoxide + carbon dioxide + formaldehyde + temperature + humidity)4. Applicable scenes: indoors, in cars, public places, stations, gardens, schools5. Power: 5W6. Application technology: natural air flow detection technology7. Display mode: LED8. Error fluctuation: 0-30%9. Power on warm-up: 120 seconds10. Working voltage: 5V11. Battery capacity: 850mAh12. Charging time: about 3 hours13. Working time: about 180-240 minutes14. Product dimensions: 6.3 x 2.6 x 12 cm15. Product weight: about 235 gramsSpecification: Package Weight One Package Weight 0.23kgs / 0.50lb One Package Size 18cm * 9cm * 4cm / 7.09inch * 3.54inch * 1.57inch Qty per Carton 50 Carton Weight 12.30kgs / 27.12lb Carton Size 46cm * 38cm * 22cm / 18.11inch * 14.96inch * 8.66inch Loading Container 20GP: 693 cartons * 50 pcs = 34650 pcs40HQ: 1609 cartons * 50 pcs = 80450 pcs
177,00 kr
-
8 Colors Indoor Lighting Night Lights Motion Sensor LED Toilet Seat Cover Lightbowl Light Lamp, LED1660, LED1660US
1. This item is motion sensor light, you can install it on your toilet seat cover for night use. 2. Compatible with any toilets. 3. Lightbowl only works in the dark, when it sensors movement it will turn on and last for 2 minutes before last movement. So, if you turn your toilet light on, the lightbowl will stay off to save the battery and works when you are in the dark. 4. Easy to install: insert batterries, right size arm to hang lightbowl on the rim of the toilet. 5. The light has 8 colors in total, set the button to the OUT position to cycle colors. Press the button IN to set to the single color when desired color is visible. 6. Please note that your lightbowl will work best if the sensor face the door. 7. How to clean it: wipe off with wet wipe, damp cloth or cleaner. Lightbowl is designed for daily indoor bathroom use only. Do not immerse it in water or place directly under running water. 8. AAA batteries are not included.Specification: General Material Plastic, ABS Lifetime 10000 hours Wattage 5W Light Color Colorful Light Power Source 3 x 1.5V AAA (not included) Voltage (V) 4.5V Product Size 9.5*6*1.7cm Weight 45g Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 16.5cm * 10cm * 4cm / 6.5inch * 3.94inch * 1.57inch Qty per Carton 100 Carton Weight 4.80kgs / 10.58lb Carton Size 40cm * 40cm * 35cm / 15.75inch * 15.75inch * 13.78inch Loading Container 20GP: 476 cartons * 100 pcs = 47600 pcs40HQ: 1105 cartons * 100 pcs = 110500 pcs
14,00 kr
-
PM2.5/PM10 Air Quality Detector Indoor Air Quality Monitor, 6 in 1 Air Quality Detector White, 6 in 1 Air Quality Detector Black
1. Material: ABS2. PM2.5 detection range: 0-999ug/m33. PM10 detection range: 0-999ug/m34. HCHO detection range: 0-9.999mg/m35. TVOC detection range: 0-9.999mg/m36. Carbon monoxide detection range: 0-1000PPM7. Carbon dioxide detection range: 0-5000PPM8. Power supply: 1 lithium battery, 1200mAh (included)9. Applicable temperature: -1~+70 degrees Celsius10. Working voltage: 5V11. Charging interface: TYPE-C12. With a large display screen, the detection data can be seen more clearly, and the results can be obtained easily13. The size of the display is small, you can use it on the desk without taking up too much desk space, and it is also portable and can be used on the wall14. Adopt infrared detection technology, detection technology and electrochemical detection technology to display accurate data15. Four-color alarm: green means good air quality, yellow, orange, red means poor air quality16. Color full-view LCD screen, display real-time test value, battery power and other data in one interface17. Infrared sensor can accurately track air quality, including PM2.5, PM10, HCHO, TVOC, CO and CO218. Suitable for bedroom, living room, kitchen, office, car, school, hotel, camping and other environments19. Comprehensive detection of pollutants and harmful substances in the environment to protect your family from harm20. Equipped with high-quality temperature sensor and humidity sensor, the detection is fast and accurate21. Easy to operate, it can work and detect automatically without calibration after starting up22. Dimensions: Approx. 90x35x70mm23. Net weight: 140 gramsSpecification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 12cm * 12cm * 5cm / 4.72inch * 4.72inch * 1.97inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs
191,00 kr
-
Gas Carbon Monoxide Detector Sensor Unit LCD CO Safety Alarm Tester, CO999
1. Loud 85db alarm 2. Permanent carbon monoxide sensor 3. The red LED will flash while in alarm mode 4. Standby: Green Led flashes once every 30 seconds 5. Low-bat Indicator: Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD 6. 3 digits LCD display 7. Power supply: 3 x AA batteries (not included) 8.Sensitivity & time: 50ppm, alarms within 60~90 minutes; 100ppm, alarms within 10~40 minutes; 3000ppm, alarms within 3 minutes 9. Standby current: Less than 50uA 10. Alarm current: Less than 50mASpecification: General Material ABS Power Supply DC 4.5V Alarming Current <50mA Standby Current <50uA Size Diameter: 10cm Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 13cm * 13cm * 7cm / 5.12inch * 5.12inch * 2.76inch Qty per Carton 50 Carton Weight 7.90kgs / 17.42lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 50 pcs = 31000 pcs40HQ: 1439 cartons * 50 pcs = 71950 pcs
41,00 kr
-
TV-637H5/IP POE Indoor Surveillance IP Camera, 5.0MP CMOS Sensor, Support Motion Detection, P2P/ONVIF, 36 LED 20m IR Night Vision, TV-637H5/IP POE
1. Built-in POE power supply module, no external power supply. But you need a POE switch or POE NVR. 2. Advanced H.265/H.264 video compression, Super low rate, high definition quality of image 3. Professional anti-lightning, conform to GB/T17626.5 and IEC61000-4-5. 4. Support ONVIF; access third party. 5. Support various mobile monitoring(iPhone, Android) 6. Provide web, CMS, center platform management software MYEYE, provide SDK development 7. Support cloud technology, easy to achieve network penetration, fro in-line and alarm information pushed. 8. DC 12V/1A POE 13W. 9. Support WEB, OSD, live video transmission, motion detect and IO alarm, front-end storage/playback/download, and center reminder and image linkage, support JPEG capture, united remote client monitoring software, MYEYE, perfect SDK.Specification: General Model TV-637H5/IP POE Shape Bullet Mount Types Wall bracket Power Supply DC 12V 1.0A Performance Motion detection, Night Vision, Alarm Function System / Hardware Sensor 5.0M 1/2.5 PS5510 CMOS sensor Image Sensor CMOS Pixels 5.0MP Lens 3.6mm Minimum Illumination Color: 0.1Lux/F1.2 Media Format Video Compression Format H.264 Night Vision Infrared Distance 20m Configuration 36 infrared LEDs Physical Environment Environment Outdoor, Indoor Package Weight One Package Weight 0.52kgs / 1.15lb One Package Size 19.5cm * 10.5cm * 10.5cm / 7.68inch * 4.13inch * 4.13inch Qty per Carton 8 Carton Weight 5.00kgs / 11.02lb Carton Size 43cm * 23cm * 41cm / 16.93inch * 9.06inch * 16.14inch Loading Container 20GP: 657 cartons * 8 pcs = 5256 pcs40HQ: 1526 cartons * 8 pcs = 12208 pcs
462,00 kr
-
YF-0155 Good Safe Wireless Electro Guard Watch Remote Detective System Kit for Home Office, 1 x Receiver + 1 x Detector, YF-0155
1. Adopt advanced infrared detect technology. 2. Infrared sensor detects motion and sends a signal to the receiver. 3. Wireless installation, just place the sensor at the entrance. 4. Easy to install and no electrical wires to install. 5. Unique appearance design, evoking an aesthetic feeling. 6. Detector requires 9 volt heavy duty battery(not included). 7. Receiver requires 2xAA batteries(not included). 8. Perfect for home, office, hotels, jewelry store etc..Specification: General Certificate CE, FCC Model YF-0156 Material Plastic, ABS Power Supply DC 9V, 2 x AA Batteries Size Receiver: 9.2*6.7*3.8cm, Detector: 9*6.3*4.7cm Weight 127g (1 x Receiver + 1 x Detector) Package Include Package Contents 1 x User Manual 1 x Wireless Infrared Detector 1 x Receiver 1 x Fixed Parts Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 12.3cm * 9.8cm * 7cm / 4.84inch * 3.86inch * 2.76inch Qty per Carton 100 Carton Weight 17.80kgs / 39.24lb Carton Size 52cm * 36cm * 50cm / 20.47inch * 14.17inch * 19.69inch Loading Container 20GP: 284 cartons * 100 pcs = 28400 pcs40HQ: 661 cartons * 100 pcs = 66100 pcs
109,00 kr
-
NEO NAS-PD02W Wireless WiFi PIR Detector Motion Sensor, with Magnet Bracket & Support Android / IOS systems & Ultra-bright Red LED
1.Measure the light sensitivity 2.Battery: CR123A x 1 Standby time:2 years 3.Sensitivity distance:7m Sensitive angle: 110 degree 4.Wireless Type:2.4GHz Wifi distance:45m 5.Operating Humidity: 20% 85% 6.Free app:Tuyasmart or Smart Life. 7.Support systems: Android and IOS.Specification: Package Weight One Package Weight 0.60kgs / 1.32lb One Package Size 4.5cm * 4.5cm * 4.8cm / 1.77inch * 1.77inch * 1.89inch Qty per Carton 10 Carton Weight 6.50kgs / 14.33lb Carton Size 30cm * 22cm * 22cm / 11.81inch * 8.66inch * 8.66inch Loading Container 20GP: 1836 cartons * 10 pcs = 18360 pcs40HQ: 4263 cartons * 10 pcs = 42630 pcs
191,00 kr
-
100m Alarm Dual Beam Photoelectric Infrared Detector ABT-100, ABT-100
Features1. Intelligent power transmission: Independent development of the chip can automatically sense ambient changes (According to the environmental conditions to automatically adjust to the radio transmit power, greatly extending the life of the launching tube, while also lowering power.) 2. Cable, bus compatible, holographic spot real-time reporting. 3. Full-function diagnostics, environmental adaptive, fault lock. 4. Digital Fuzzy Artificial Intelligence Identification: Using artificial intelligence fuzzy judgments, false positives to a minimum. 5. Patent coaxial dual focal length precision optical aspheric focusing lens. 6. Dedicated DSP chip, patented multi-dimensional fault-tolerant, real detection alarm technology. 7. Optical lens up and down while structural adjustments, to adjust faster and more accurate. 8. Professional CPU chips, strong anti-interferenceSpecifications1. Outdoor Distance: 100m 2. Indoor Distance: 300m 3. Beams: 2 4. Optical Source: Infrared digital pulse mode 5. Response Speed: 50-700ms 6. Alarm Output: NC&NO contact rating AV/DC 30V/0.5A 7. Alarm Output-bus: MA bus across wave carrier model 8. Input Voltage: DC 9-24V, AC 11-18V 9. Current: 65mA 10. OperationTemperature/Humidity: -25 degree C-60 degree C, 5%-95% 11. Crust Material: PC resin tin metal 12. Level Adjustment Axis: 180 degree +/- 90 degree 13. Vertical Adjustment Axis: +/- 10 degree 14. Tamper Output: NC contact rating AV/DC 24V/0.5mA 15. Housing Material: PolycarbonateSpecification: Package Weight One Package Weight 0.92kgs / 2.03lb One Package Size 25cm * 18cm * 9cm / 9.84inch * 7.09inch * 3.54inch Qty per Carton 20 Carton Weight 18.50kgs / 40.79lb Carton Size 52cm * 47cm * 37cm / 20.47inch * 18.5inch * 14.57inch Loading Container 20GP: 294 cartons * 20 pcs = 5880 pcs40HQ: 684 cartons * 20 pcs = 13680 pcs
136,00 kr
-
TUYA APP Control Wireless PIR Motion Sensor Alarm WiFi Motion Detector, Tuya WiFi
1. Remote control: Control through the "Tuya Smart"/"Smart Life" APP on the mobile phone, no hub required. When it detects any movement, the wifi motion sensor will activate 80dB sound, at the same time it will send you an alert via the app.2. Four Arming Modes: The wireless motion detector has 4 modes (sound and light/silent/no light/secret mode); according to your daily needs, choose your favorite arming mode.3. Motion detectors provide a higher level of security for your property. And because of its intelligent design, it can prevent false positives or negative negatives for pets under 25KG.4. Through the built-in bracket, the infrared alarm can be rotated 360 degrees to adjust the detection angle.5. It can be placed at will or fixed with screws, and supports various installation methods such as flat laying and wall fixing.6. Timing disarm and arm: With timing function, you can set the time according to your needs, DIY your home security system.7. The motion sensor alarm is powered by 2 AAA batteries (not included) or a USB cable (included). Note: If the alarm is triggered frequently at your installation location, the battery will drain quickly, so we recommend using a 5V USB adapter to power it.Parameter:1. Working voltage: 5V2. Standby current: 20mA3. USB voltage: DC5V4. Alarm current: 60mA5. Choice of angle: left and right 360 degrees, up and down 120 degrees6. WiFi: IEEE 802.11b 2.4GHz7. Alarm sound: greater than 80dB8. Working temperature -10 ~ +50 degrees Celsius9. Detection distance: 9-12m10. Detection angle: 90 degrees11. Transmission frequency: 433 MHZSpecification: General Certificate CE Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 6cm / 5.91inch * 3.94inch * 2.36inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs
150,00 kr