Search results for "industrial components"

1. Modbus RTU Analog Output 8CH is an industrial standard analog output module, supports 8-ch simultaneous output. Adopts Modbus RTU protocol with built-in protection circuits such as power isolation, magnetical isolation, resettable fuse, and TVS.2. Supports setting device address (1 to 255) to cascade multiple devices via RS485 bus.3. On-board voltage regulator chip supports wide voltage supply from 7 to 36V.4. On-board integrated power isolation provides stable isolation voltage; the isolated end requires no additional power supply.5. On-board integrated magnetic coupling isolation enables signal isolation, with high reliability and strong anti-interference capability.6. On-board self-recovery fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltage and transient spike voltage in the circuit, protecting against overcurrent, overvoltage, lightning, and static electricity.7. 12-bit DA conversion with high-precision resistors ensures more accurate output data.8. Built-in watchdog ensures stable output without crashing.9. Rail-mounted enclosure design supports stackable combination, enabling easy installation and safer use.10. External 3 LED indicators for convenient viewing of MCU status and signal transmission/reception status. Parameters:1. Communication Interface: RS4852. Communication Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560003. Default Communication Format: 9600, N, 8, 14. Modbus Protocol: Standard Modbus RTU Protocol 5. Supply Voltage: DC 7 to 36V6. Output Mode: 8-channel current output / 8-channel voltage output 7. Resolution: 12-bit, 1 microampere / 12-bit, 1 millivolt 8. Range: 0~20mA / 0~10V9. Output Accuracy: +/-0.03mA / +/-0.01VSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 16cm * 10cm * 6cm / 6.3inch * 3.94inch * 2.36inch Qty per Carton 48 Carton Weight 6.90kgs / 15.21lb Carton Size 32cm * 42cm * 38cm / 12.6inch * 16.54inch * 14.96inch Loading Container 20GP: 522 cartons * 48 pcs = 25056 pcs40HQ: 1212 cartons * 48 pcs = 58176 pcs

Read more less

1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.14. Rail-mounted ABS protective casing for easy installation and safer use.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading18. 34 multi-functional GPIO pins19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels20. 12 programmable I/O (PIO) state machines for custom peripheral supportProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power supply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Read more less

1. This product is an industrial standard isolated RS485 to PWM pulse output module. Four channels of frequency and duty cycle are independently adjustable. It adopts Modbus RTU protocol and includes built-in protection circuits such as power isolation, magnetic coupling isolation, self-recovery fuse, and TVS.2. The output uses high-speed optocoupler isolation, and the output high-level voltage can be selected via internal jumpers.3. Four channels of PWM pulse output with frequency and duty cycle independently adjustable.4. Supports setting device address (1 to 255) to cascade multiple devices via the RS485 bus.5. On-board voltage regulator chip supports wide voltage supply from 7V to 36V.6. On-board integrated power isolation provides stable isolation voltage; the isolated end requires no additional power supply.7. On-board integrated magnetic coupling isolation enables signal isolation, with high reliability and strong anti-interference capability.8. On-board self-recovery fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltage and transient spike voltage in the circuit, protecting against overcurrent, overvoltage, lightning, and static electricity.9. Built-in watchdog ensures stable output without crashing.10. Rail-mounted enclosure design, compact size, easy installation.11. External 3 LED indicators for convenient viewing of power status and signal transmission/reception status. Parameters:1. Communication Interface: RS485 2. Communication Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 256000 3. Default Communication Format: 9600, N, 8, 1 4. Modbus Protocol: Standard Modbus RTU Protocol 5. Supply Voltage: DC 7V to 36V 6. Output Voltage: Default 3.3V, can be set to 5V via internal jumper 7. Output Current: Signal type, less than 30mA 8. Pulse Frequency: 1Hz to 200KHz 9. Frequency Resolution: 0.01Hz 10. Frequency Accuracy: 0.5 percent (equivalent to 5 per mille)11. Duty Cycle: 0 to 100 percent 12. Duty Cycle Resolution: 0.01 percent 13. Duty Cycle Accuracy: 0.5 percent (1Hz to 50KHz), 1 percent (50KHz to 200KHz)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 1cm * 6cm / 4.72inch * 0.39inch * 2.36inch Qty per Carton 72 Carton Weight 8.30kgs / 18.30lb Carton Size 38cm * 32cm * 50cm / 14.96inch * 12.6inch * 19.69inch Loading Container 20GP: 438 cartons * 72 pcs = 31536 pcs40HQ: 1018 cartons * 72 pcs = 73296 pcs

Read more less

1. Based on the RP2350 main control chip, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. 12 programmable I/O (PIO) state machines for custom peripheral support.4. Built-in 520KB SRAM and 16MB on-chip Flash, using a Type-C interface for easy connection.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage, requiring no additional power supply at the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.14. DIN rail mountable ABS protective casing for easy installation and enhanced safety.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Can be recognized as a mass storage device via USB for drag-and-drop program downloading. 18. Provides 34 multi-functional GPIO pins19. Pins include 1 HSTX, 2 I2C, 2 UART, 8 12-bit ADC, and 24 controllable PWM channelsProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power dupply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Read more less

1. The outer shell is made of aluminum alloy, which is harder, lighter in weight, and has a smooth surface that is less prone to wear2. The coils are made of pure copper and Baosteel silicon steel sheets, which operate at a lower temperature and with lower current, thereby enhancing the stability of the fan3. The thickened fan blades are formed in one piece, which is less likely to deform or break, and the multi-blade design provides a larger contact area and greater air volume4. It can be applied in scenarios such as power supply equipment, servers, power supplies, cabinets, security equipment, and household appliances5. The oil-filled bearings use lubricating oil in the sleeve to reduce friction loss, resulting in low noise and low costParameters:1. Rotational speed: 2600 r/min2. Motor power: 23W3. Current:- 110V: 0.22A- 220V: 0.14A- 380V: 0.06A4. Bearing type: oil-filled5. Fan blade count: 5 blades6. Material: aluminum, PBT7. Size: about 12 x 12 x 3.8 cm8. Weight: about 530gSpecification: Package Weight One Package Weight 0.61kgs / 1.35lb One Package Size 15cm * 15cm * 6cm / 5.91inch * 5.91inch * 2.36inch Qty per Carton 36 Carton Weight 24.00kgs / 52.91lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 36 pcs = 16776 pcs40HQ: 1083 cartons * 36 pcs = 38988 pcs

Read more less

1. Compatible with USB 2.0, providing complete isolation of 12 Mbps data rate, isolation of 2500V voltage, no need for external power supply, no need for driver programs2. ADUM3160 isolation voltage: 2500V3. Power module isolation voltage: 1500V4. Supports USB full-speed 12 Mbps, does not support pure high-speed devices5. Supports USB control transmission, batch transmission, interrupt transmission, synchronous/periodic transmission6. Power supply: taken from the USB port of the computer host7. Driver-free, more convenient to use8. Operating environment: -40°C to 85°C9. Suitable for working environments with strong electricity and strong interference, noise-sensitive fields, USB debugging devices, various industrial control USB devices, other common USB peripherals, such as mice, keyboards, USB sound cards, USB hubs, USB cameras, etcNotes:1. This product has an onboard output power supply from Golden Solar B0505S with a power of 1W. When the working current of your USB device exceeds 180mA, you can use a USB dual-ended cable in addition for power supply2. This product supports full-speed devices, but does not support pure high-speed devices (USB 2.0). Most USB devices are backward compatible and can be usedSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 215 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 215 pcs = 94170 pcs40HQ: 1018 cartons * 215 pcs = 218870 pcs

Read more less

1. Shaft: 8 x 10mm 2. Length: 26mm 3. Diameter: 20mm 4. Material: aluminiumSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb Qty per Carton 500 Carton Weight 9.00kgs / 19.84lb Carton Size 30cm * 20cm * 11cm / 11.81inch * 7.87inch * 4.33inch Loading Container 20GP: 4040 cartons * 500 pcs = 2020000 pcs40HQ: 9379 cartons * 500 pcs = 4689500 pcs

Read more less

1. Shaft usage: 6.35mm x 6.35mm 2. Length: 25mm 3. Diameter: 20mm 4. Material: AluminumSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb Qty per Carton 500 Carton Weight 10.00kgs / 22.05lb Carton Size 30cm * 20cm * 11cm / 11.81inch * 7.87inch * 4.33inch Loading Container 20GP: 4040 cartons * 500 pcs = 2020000 pcs40HQ: 9379 cartons * 500 pcs = 4689500 pcs

Read more less

1. Shaft usage: 8mm x 8mm 2. Length: 25mm 3. Diameter: 20mm 4. Material: AluminumSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb Qty per Carton 500 Carton Weight 10.00kgs / 22.05lb Carton Size 30cm * 20cm * 11cm / 11.81inch * 7.87inch * 4.33inch Loading Container 20GP: 4040 cartons * 500 pcs = 2020000 pcs40HQ: 9379 cartons * 500 pcs = 4689500 pcs

Read more less

1. Shaft usage: 6mmx6mm 2. Length: 25mm 3. Diameter:20mm 4. Material: aluminumSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb Qty per Carton 400 Carton Weight 8.00kgs / 17.64lb Carton Size 30cm * 20cm * 11cm / 11.81inch * 7.87inch * 4.33inch Loading Container 20GP: 4040 cartons * 400 pcs = 1616000 pcs40HQ: 9379 cartons * 400 pcs = 3751600 pcs

Read more less