Search results for "development board"

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs

Read more less

1. This product is a high-performance, highly integrated microcontroller development board independently designed by Waveshare. Within its compact form factor, it integrates peripherals including a 3.5-inch capacitive HD IPS display, highly integrated power management IC, low-power audio codec, camera interface, 6-axis IMU (3-axis accelerometer + 3-axis gyroscope), RTC, and Micro SD card slot, facilitating development and product integration. 2. Features Raspberry Pi-designed RP2350B microcontroller chip 3. Unique dual-core/dual-architecture: Dual ARM Cortex-M33 cores + dual Hazard3 RISC-V cores, both operating at up to 150MHz, enabling flexible architecture switching 4. Built-in 520KB SRAM and 16MB on-chip Flash 5. Type-C interface eliminates orientation concerns 6. Onboard 3.5-inch capacitive touch HD IPS screen with 320 × 480 resolution and 65K colors for clear image display 7. Integrated ST7796 display driver and FT6336 capacitive touch controller using SPI and I2C interfaces respectively, minimizing pin consumption 8. Camera interface compatible with mainstream modules (e.g., OV2640, OV5640) for image/video capture 9. Onboard 3.7V MX1.25 lithium battery charge/discharge interface 10. USB 1.1 host/device support 11. Low-power sleep/hibernation modes 12. Programmable via drag-and-drop when recognized as USB mass storage 13. 22 multifunctional GPIO pins: 2×SPI, 2×I2C, 2×UART, 7×12-bit ADC, 18×PWM channels 14. Precision on-chip clock/timer modules 15. Built-in temperature sensor for real-time chip monitoring 16. 12 programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 48 Carton Weight 5.90kgs / 13.01lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 48 pcs = 31728 pcs40HQ: 1535 cartons * 48 pcs = 73680 pcs

Read more less

Features1. On-board SWD interface, and it can be programmed with ST-LINK V2.2. On-board test indicator LED, and the beginners can program to control it.3. On-board 100ma 3.3V Regulator.4. All GPIO are led out and the names of the pins are marked。5. Microcontroller: STM32F103C8T6.6. Burning times: 10k cycles7. Operating voltage: 3.3 V.8. IO logic voltage: 3.3V9. Digital I/O Pins: 37.10. Analog Input Pins: 10 (12bits).11. Flash Memory: 64KB.12. RAM: 20KB.13. Programmable Clock Speed: 72 MHz (MAX).Specification 1. Model: DTR-WG01582. Quantity: 1 set3. Color: Blue + Yellow4. Material: PCB + Alloy + Plastic5. Chipset: STM32F103C8T66. Dimensions (5.5 cm x 2.2 cm x 1.2 cm), weight (7.5g)7. Packing List: - 1 x STM32F103C8T6 development board- 2 x 1X20P pin headers (2.54mm pitch)Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 9cm * 3cm * 1cm / 3.54inch * 1.18inch * 0.39inch Qty per Carton 3120 Carton Weight 15.00kgs / 33.07lb Carton Size 54cm * 39cm * 40cm / 21.26inch * 15.35inch * 15.75inch Loading Container 20GP: 316 cartons * 3120 pcs = 985920 pcs40HQ: 734 cartons * 3120 pcs = 2290080 pcs

Read more less

1. Employs the Raspberry Pis officially designed RP2350 microcontroller chip.2. Unique dual-core, dual-architecture design, featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at flexible clock speeds up to 150MHz.3. Uses Infineons CYW43439 wireless chip, supporting Wi-Fi 4 and Bluetooth 5.2.4. Built-in 520KB SRAM and 4MB on-chip Flash.5. Stamp hole design for direct soldering to user-designed baseboards.6. Pico 2 WH uses official solder headers; no stamp hole design, connection to the baseboard is only possible via headers.7. USB 1.1 host and device support.8. Supports low-power sleep and hibernation modes.9. Can be recognized as a mass storage device via USB for drag-and-drop program downloads.10. Up to 26 versatile GPIO pins.11. 2 One SPI, two I2C, two UARTs, three 12-bit ADCs, and 16 controllable PWM channels.12. Twelve programmable I/O (PIO) state machines for custom peripheral support.Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 5cm * 8cm * 3cm / 1.97inch * 3.15inch * 1.18inch Qty per Carton 462 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 37cm * 35cm / 19.69inch * 14.57inch * 13.78inch Loading Container 20GP: 411 cartons * 462 pcs = 189882 pcs40HQ: 956 cartons * 462 pcs = 441672 pcs

Read more less

1. ESP32-C5-Touch-LCD-3.5 is a microcontroller development board designed by Waveshare. Onboard 3.5-inch LCD screen, power management chip, 6-axis sensor, temperature and humidity sensor, Micro SD card slot, etc., providing hardware foundation for display, sensing, voice, and multimedia storage. Relying on these hardware, the product can connect to online AI LLM platforms to achieve intelligent voice interaction and visual interaction.2. Adopts ESP32-C5-WROOM-1U series module, equipped with a RISC-V 32-bit processor, main frequency up to 240 MHz.3. Integrated 384 KB SRAM, 320 KB ROM, 8 MB PSRAM, and 32 MB Flash, meeting the needs for program execution, graphical user interfaces, and data storage.4. Integrated 2.4 GHz and 5 GHz dual-band Wi-Fi, Bluetooth 5 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance.5. Onboard camera interface, supporting BF3901 camera.6. Onboard battery charge management module, with a reserved 3.7V MX1.25 lithium battery interface for external battery power supply.7. Uses Type-C interface, improving user convenience and device compatibility.8. Onboard 3.5-inch capacitive touch HD IPS screen, 320 x 480 resolution, 262K colors, capable of displaying color images clearly.9. Built-in ST7796 driver chip and FT6336 capacitive touch chip, using SPI and I2C interfaces for communication respectively, saving interface pin resources.10. Leads out UART, I2C, and some IO interfaces, integrated full-speed USB serial port.11. Onboard QMI8658 6-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor, and TF card slot, etc.12. Onboard PWR and BOOT customizable side buttons, convenient for custom feature development using buttons.13. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker, easily playing with Xiaozhi AI.14. Supports ESP-IDF / Arduino development environments, rich resources, easy to get started.LCD Screen Specifications:1. Display panel: IPS2. Display size: 3.5 inch3. Display resolution: 320 x 480 pixels4. Display color: 262K5. Display brightness: 450 cd/m26. Contrast ratio: 1100:17. Communication interface: SPI8. Driver IC: ST77969. Touch type: Capacitive sensing10. Touch IC: FT6336Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 45cm * 26cm * 38cm / 17.72inch * 10.24inch * 14.96inch Loading Container 20GP: 599 cartons * 100 pcs = 59900 pcs40HQ: 1392 cartons * 100 pcs = 139200 pcs

Read more less

1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating concerns about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Can be recognized as a mass storage device via USB for drag-and-drop program downloading.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of wiring terminals, allowing for bottom or back wiring options, facilitating integration into various applications such as rail mounting or embedded systems.16. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs40HQ: 1130 cartons * 96 pcs = 108480 pcs

Read more less

1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB of SRAM and 16MB of on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Programs can be downloaded via drag-and-drop by recognizing the device as a mass storage device via USB.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of terminal blocks, allowing for bottom or back wiring, facilitating integration into various applications such as rail mounting or embedded systems.16. Capacitive 5-point touch: Light touch for intuitive operation and multi-point UI interaction; touch functionality can be accessed via I2C signals, supporting 5-point touch.17. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs40HQ: 1130 cartons * 96 pcs = 108480 pcs

Read more less

1. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz2. Support 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth5 (LE), onboard antenna3. Built-in 512KB SRAM and 384KB ROM, stacked 8 MB Flash and 8 MB PSRAM4. Onboard 7-inch capacitive touch screen, 800×480 resolution, 65K color5. Support I2C interface to control capacitive touch, 5-point touch, support interrupt6. Onboard CAN, RS485, I2C interface and Micro SD card holder, etc., integrated full-speed USB serial port7. Support flexible clock, module power supply individual setting and other precise control, to achieve multi-scenario low power mode8. Application areas: HMI human-machine interface, LVGL GUI development9. Product size: 192.96 x 110.76mm10. Weight: 291gSpecification: Package Weight One Package Weight 0.39kgs / 0.85lb One Package Size 26cm * 14cm * 4cm / 10.24inch * 5.51inch * 1.57inch Qty per Carton 24 Carton Weight 9.50kgs / 20.94lb Carton Size 28cm * 30cm * 50cm / 11.02inch * 11.81inch * 19.69inch Loading Container 20GP: 634 cartons * 24 pcs = 15216 pcs40HQ: 1473 cartons * 24 pcs = 35352 pcs

Read more less

This product is a microcontroller development board that supports 2.4GHz Wi-Fi and BLE 5. It features high-capacity Flash and PSRAM, along with an onboard 7-inch LCD screen capable of smoothly running GUI applications such as LVGL. Equipped with a variety of peripheral interfaces, it enables rapid development of HMI (Human-Machine Interface) and other applications based on the ESP32-S3.Powered by a high-performance Xtensa 32-bit LX7 dual-core processor with a clock frequency of up to 240MHz.Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with options for onboard or external antennas.Includes 512KB of internal SRAM and 384KB of ROM, with an additional 16MB of Flash and 8MB of PSRAM integrated via a stacked package.Features an onboard 7-inch LCD screen with 800 ?? 480 resolution and 65K-color display.Includes onboard interfaces such as CAN, RS485, and I2C, as well as a Micro SD card slot and an integrated full-speed USB serial port.Supports flexible clock management and independent power control for various modules, enabling low-power operation across diverse application scenarios.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 20cm * 20cm * 5cm / 7.87inch * 7.87inch * 1.97inch Qty per Carton 12 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 22cm * 32cm / 16.54inch * 8.66inch * 12.6inch Loading Container 20GP: 901 cartons * 12 pcs = 10812 pcs40HQ: 2093 cartons * 12 pcs = 25116 pcs

Read more less

1. Equipped with the high-performance Xtensa 32-bit LX7 dual-core processor of ESP32-S3R8, with a main frequency of up to 240 MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with built-in antenna3. Equipped with 512KB of SRAM and 384KB of ROM, and stacked 8MB PSRAM and externally connected 16MB Flash4. Uses Type-C interface, eliminating the need to worry about the front or back insertion, improving the users convenience and device compatibility5. Equipped with a 1.54-inch LCD screen, 240 x 240 resolution, 262K color, capable of clearly displaying color images6. Equipped with ES7210 audio encoding chip, supporting dual-microphone audio acquisition and echo cancellation function7. Equipped with ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI8. Equipped with QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture to expand applications9. Exposed I2C, UART and other pads, available for external devices and debugging use, flexible configuration of peripheral functions10. Equipped with 3 customizable function buttons, capable of achieving single-click, double-click, long press and other operations11. Equipped with 3.7V MX1.25 lithium battery charging and discharging interface12. Equipped with Micro SD card slot, enabling storage expansion, high-speed data transmission, improving flexibility of use, suitable for data recording and media playback, simplifying circuit designLCD screen parameters1. Display panel: IPS2. Display resolution: 240 x 240 pixels3. Display size: 1.54 inches4. Communication interface: 4-Wire SPI5. Touch type: capacitive sensing6. Display colors: 262K9. Driving IC: ST778910. Touch IC: CST81611. Effective screen size: about 2.772 x 2.772 cmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 126 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 126 pcs = 56700 pcs40HQ: 1045 cartons * 126 pcs = 131670 pcs

Read more less