Search results for "boat mount"

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.36kgs / 5.21lb One Package Size 52cm * 26cm * 15cm / 20.47inch * 10.24inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 54cm * 28cm * 32cm / 21.26inch * 11.02inch * 12.6inch Loading Container 20GP: 551 cartons * 2 pcs = 1102 pcs40HQ: 1279 cartons * 2 pcs = 2558 pcs

Read more less

1. Function: ON-OFF. 2. Pin: 4. 3. Suitable for all 12/24V car battery installation, such as automobiles, motorcycles, buses, boats, recreational vehicles, boats, trailers, etc. 4. Ultra-high-end luxury switch with led indicator light. 5. Made of environmentally friendly flame retardant materials. 6. 12-24V universal car voltage, convenient to control the conversion of car lovers all equipment. 7. Protection against output short circuits, overload protection, protection against polarity reversal, multiple protection, safety for its use.Specification: General Material Plastic Size 49*37*21mm Weight 25g Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 8cm * 5cm * 5cm / 3.15inch * 1.97inch * 1.97inch Qty per Carton 100 Carton Weight 4.18kgs / 9.22lb Carton Size 26cm * 27cm * 27cm / 10.24inch * 10.63inch * 10.63inch Loading Container 20GP: 1406 cartons * 100 pcs = 140600 pcs40HQ: 3266 cartons * 100 pcs = 326600 pcs

Read more less

Feature1. Low power consumption, super energy-saving and environmentally friendly 2. Equipped with a cigarette lighter plug, no more extra batteries required 3. Small sized and lightweight, portable and easy to carry 4. Refresh the strange odor in your car 5. Ideal for cars, trucks, buses, off-road equipment, boats and other recreational vehicles 6. Material: High-quality ABS 7. The double headed oscillating fan with 2 adjustable speeds and 360 degrees rotation allows the air to be circulated throughout your whole car so no one will be left out 8. It can be mounted on your dash or wherever you wantSpecification1. Voltage: DC 24V 2. Power: 10W 3. Attached cable length: Approx. 2m 4. Noise: Less than 50dB, low noiseSpecification: General Material ABS Product Size 26.5*10.5*9CM Product Weight 536G Package Weight One Package Weight 0.91kgs / 2.00lb One Package Size 30cm * 15cm * 14cm / 11.81inch * 5.91inch * 5.51inch Qty per Carton 12 Carton Weight 9.80kgs / 21.61lb Carton Size 58cm * 47cm * 32cm / 22.83inch * 18.5inch * 12.6inch Loading Container 20GP: 305 cartons * 12 pcs = 3660 pcs40HQ: 709 cartons * 12 pcs = 8508 pcs

Read more less

1. Material: ABS2. Scope of application: suitable for 4.6-9.9 inch cell phones, tablet computer3. 180 degree manual bending arc connecting arm, free to adjust the arc4. 360 degrees free to adjust the rotation angle, easy to watch, smooth and solid5. 4 corners protective cover, non-slip sponge pad, anti-scratch equipment, anti-falling6. High-strength compression spring, strong tension contraction clamp arm, shaking / bumps are not loose7. Charging ports reserved at both ends of the bracket, convenient for charging at any time, safe traveling, driving with peace of mind8. Bottom nano adhesive suction cup, strong adsorption, suction cups dirty lost viscous, washable for repeated use9. Applicable size: about 11.75-25.2cm width rangeSpecification: Package Weight One Package Weight 0.27kgs / 0.59lb One Package Size 19cm * 10cm * 9cm / 7.48inch * 3.94inch * 3.54inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 41cm * 46cm / 20.47inch * 16.14inch * 18.11inch Loading Container 20GP: 271 cartons * 50 pcs = 13550 pcs40HQ: 631 cartons * 50 pcs = 31550 pcs

Read more less

1. Extended main wiring harness with 10?pin socket replacement for Yamaha outboard 10?pin 703 remote control box2. The wiring part adopts buckle design to match the original interface, which is convenient for installation and plug and play.3. The wiring harness can be extended by 5m/16ft to achieve a farther control function.4. Professional manufacturing, superb craftsmanship and high accuracy help to provide the best performance.5. Material: ABS + metal6. Length: 5.2m/16ft7. OE: 668-8258A-20-0Specification: Package Weight One Package Weight 1.66kgs / 3.66lb One Package Size 33cm * 33cm * 5cm / 12.99inch * 12.99inch * 1.97inch Qty per Carton 12 Carton Weight 17.20kgs / 37.92lb Carton Size 52cm * 39cm * 36cm / 20.47inch * 15.35inch * 14.17inch Loading Container 20GP: 365 cartons * 12 pcs = 4380 pcs40HQ: 847 cartons * 12 pcs = 10164 pcs

Read more less

Item Type:Stickers Material Type:Vinyl Sticker:Car Sticker 1. Clean the surface where the decal will be installed2. Slowly removed the paper backing making sure that your decal remains stuck to the clear transfer tape. If part of your decal lifts up with the backing, press the paper backing back down against it until it stays stuck to the transfer tape.3. Once your decal is peeled away from the backing, line up & position your decal against the surface to which it will be applied.4. Use a credit card, squegee, or something similar to smooth down your decal, making sure that it is completely stuck to the surface.5. Carefully & Slowly, remove the transfer tape from your decal, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press it back down to the surface and repeat the process.Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 4.95kgs / 10.92lb One Package Size 43cm * 22cm * 24cm / 16.93inch * 8.66inch * 9.45inch Qty per Carton 4 Carton Weight 13.40kgs / 29.54lb Carton Size 46cm * 46cm * 50cm / 18.11inch * 18.11inch * 19.69inch Loading Container 20GP: 252 cartons * 4 pcs = 1008 pcs40HQ: 585 cartons * 4 pcs = 2340 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 5dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.58kgs / 3.48lb One Package Size 31cm * 23cm * 11cm / 12.2inch * 9.06inch * 4.33inch Qty per Carton 4 Carton Weight 7.40kgs / 16.31lb Carton Size 48cm * 33cm * 24cm / 18.9inch * 12.99inch * 9.45inch Loading Container 20GP: 701 cartons * 4 pcs = 2804 pcs40HQ: 1628 cartons * 4 pcs = 6512 pcs

Read more less

1. Aluminum alloy tripod stand, light and compact, sturdy and durable.2. Removable quick release plate for quick connection to camera or camcorder.3. Has a pan-tilt swivel head with bubble level.4. Come with a carrying bag for easy portability, suitable for office, home, leisure activities and travel.5. Standard 1/4 inch screw interface compatible with most digital cameras, fishing lights, etc.6. Versatile applications, suitable for office, home, leisure activities and travel.7. Suitable for most digital cameras, DVs, camcorders and other small cameras, suitable for DSLR cameras or other large cameras.Specification:1. Material: Aluminum Alloy & ABS Plastic2. Head: Three-dimensional head3. Moving Head angle: 360 degrees4. Tripod fold height: 71.5cm5. Tripod height: 208cm6. Leg diameter: About 30mm7. Weight: 2.4kgSpecification: Package Weight One Package Weight 3.21kgs / 7.08lb One Package Size 75cm * 16cm * 12cm / 29.53inch * 6.3inch * 4.72inch Qty per Carton 4 Carton Weight 13.80kgs / 30.42lb Carton Size 75cm * 25cm * 33cm / 29.53inch * 9.84inch * 12.99inch Loading Container 20GP: 430 cartons * 4 pcs = 1720 pcs40HQ: 1000 cartons * 4 pcs = 4000 pcs

Read more less

Features1. Equipped with 5pcs P9 chips, the total output power is 80W/set, the luminous flux is 8000LM/set, the brightness is 5 times that of ordinary work lights, driving in the dark night, the brightness is higher, the irradiation distance is farther, making your driving more comfortable and safe.2. Equipped with a yellow + black lampshade kit, plus the yellow lampshade, the main light can be switched to 3000K yellow light at will, and the black cover can protect the mirror surface, which is suitable for different weather conditions.3. The thick die-cast aluminum shell can withstand harsh environments and has strength and durability. The LED work light can be used for 50,000 hours.4. The lamp body is made of extra-thick 6063 die-cast aviation aluminum, the thermal conductivity and heat dissipation capacity are greatly improved, the high transparency and high hardness panel, the light penetration is stronger. It has the effects of dustproof, shockproof, rust-proof and cold-proof.5. Using the included adjustable mounting accessories, the LED spotlight can be adjusted to about 360 degrees. This makes it easy to change the direction of the beam. After installation, the bulb can slide up and down.6. DC 9-30V working voltage is suitable for various vehicles, such as off-road vehicles, compatible with almost all jeeps, cars, trucks, motorcycles, SUVs, ATVs, boats, etc.7. Many indoor and outdoor uses: garden lighting, backyard lighting, reversing lights, off-road lighting, architectural lighting, etc.Parameters1. Power: 80W/set2. Voltage: 9V-30V DC3. Lumen: 8000LM4. Waterproof level: IP685. Color temperature: 6000K6. Housing color: black7. Housing material: aluminum alloy8. Lens: PMMA organic glass9. Light type: spotlight10. Working temperature: -40~ +120 degrees Celsius11. Working life: 50,000 hours12. Size: 5 inchesSpecification: Package Weight One Package Weight 2.46kgs / 5.43lb One Package Size 33cm * 23cm * 13cm / 12.99inch * 9.06inch * 5.12inch Qty per Carton 4 Carton Weight 11.34kgs / 25.00lb Carton Size 48cm * 35cm * 30cm / 18.9inch * 13.78inch * 11.81inch Loading Container 20GP: 529 cartons * 4 pcs = 2116 pcs40HQ: 1228 cartons * 4 pcs = 4912 pcs

Read more less

1. Adopts aluminum alloy material with smooth surface for solidity, wear resistant and strong antioxidant, suitable for daily use. 2. Multiple 1/4in and 3/8in screw holes can be used with different devices, and equipped with cold shoe for flash and microphones, easy and quickly to install. 3. The camera cage does not obscure the opening of the battery bin, nor the opening of the flip screen, and with humanized design of a non slip pad and protect the bottom of the camera. 4. The multi screw holes of the camera full cage can achieve the fast switching among tripod shooting, handheld shooting, pan tilt shooting, using a variety of ways. 5. The camera full body cage has a lightweight design, will not cause additional burden and reduce the unneccessary fatigue.Specification: General Compatible with Canon: EOS R50 V Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 17cm * 12cm * 7cm / 6.69inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 10.50kgs / 23.15lb Carton Size 62cm * 35cm * 37cm / 24.41inch * 13.78inch * 14.57inch Loading Container 20GP: 332 cartons * 50 pcs = 16600 pcs40HQ: 771 cartons * 50 pcs = 38550 pcs

Read more less

1. The LED light is equipped with 8 high-intensity ZES-3570LED chips. The color temperature of the bright light is 6000K white light and 3000K amber light, which makes your driving more comfortable.2. Die-cast aluminum housing can withstand harsh environments for strength and durability. Upgraded bifocal lens The special bifocal shape design can help refract and focus light, and significantly improve the focusing effect. LED spotlights can be used for 50,000 hours and are IP67 rated against water, dust, shock and corrosion for harsh environments.3. In order to obtain better heat dissipation effect, LED light bar adopts aviation aluminum alloy as the shell, which can achieve the best heat dissipation effect and the best heat sealability. It extends the life of the light bar by over 50,000 hours.4. Using the included adjustable mounting accessories, the LED spotlight can be adjusted to approximately 90 degrees. This makes it easy to change the direction of the beam. Once installed, the bulb can slide.5. The LED spotlight strip is compatible with almost all motorcycles, jeeps, 4x4s, trucks, tractors, trailers, golf carts, pickups, cars, motorcycles, SUVs, ATVs and boats. In addition, there are many indoor and outdoor uses: garden lighting, backyard lighting, reversing lights, off-road lighting, reversing lights, architectural lighting, etc.6. Parameters:Lamp beads: 8 ZES-3570 LED chipsLight type: spotlightColor temperature: 6000K/3000KBrightness: 2000LMPower: 20WMaterial: aviation aluminum alloyLife: more than 50000HVoltage: wide voltage 9-30VWorking temperature: low temperature -40 ~ high temperature 85 degrees CelsiusHeat dissipation principle: aviation aluminum alloy fence type heat dissipation; aluminum parts heat dissipationWaterproof grade: IP67Specification: Package Weight One Package Weight 0.43kgs / 0.96lb One Package Size 10cm * 10cm * 9cm / 3.94inch * 3.94inch * 3.54inch Qty per Carton 50 Carton Weight 23.00kgs / 50.71lb Carton Size 52cm * 46cm * 22cm / 20.47inch * 18.11inch * 8.66inch Loading Container 20GP: 506 cartons * 50 pcs = 25300 pcs40HQ: 1176 cartons * 50 pcs = 58800 pcs

Read more less