Search results for "electronics battery accessories"

1. This case is specifically designed for Raspberry pi 3. 2. Made of ABS material. 3. Has different ports and button position design. 4. It have many ventilation ports in side and covering, good heat dispersion. 5. Special design to install a cooling fan (Not included).Specification: General Model C0665 Material ABS Package Include Package Contents 1 x Protective Case Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 60 Carton Weight 1.98kgs / 4.37lb Carton Size 42cm * 22cm * 32cm / 16.54inch * 8.66inch * 12.6inch Loading Container 20GP: 901 cartons * 60 pcs = 54060 pcs40HQ: 2093 cartons * 60 pcs = 125580 pcs

Read more less

1. Uses: Electrician testing and maintenance, household multi-function test pen multi-purpose set2. 18-in-1 multifunctional combination line, suitable for various multimeters3. Maximum current and voltage: 10A / 1000V4. Bus length 930 mm5. Caliber: 3.5 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 18cm * 12cm * 10cm / 7.09inch * 4.72inch * 3.94inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. Material: ABS+PC2. Voltage: 12-24V3. Output voltage: 30V4. Output current: 6.8mA5. Output interface: USB6. Applicable charging range: mobile phones, tablets, fans, etc.7. Weight: about 286 grams8. Size: about 12.9x11x3.3 cm, the cable length is about 1mFeatures:1. Constant voltage and low current charging mode, the battery voltage is full and automatically shut down, which improves the service life of the battery2. 4 USB charging ports + 3 cigarette lighter sockets3. Smart chip to match different devices4. With power switch, convenient and safe to use5. With voltage display, when the car battery output is less than 12V, the flashlight will alarm6. 6 protection systems, overcharge/overvoltage/short circuit/overtemperature/overcurrent/high power protectionSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12.5cm * 4.5cm * 20.5cm / 4.92inch * 1.77inch * 8.07inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs

Read more less

1. Material: ABS2. DC voltage: 0.8V-1000V3. AC voltage: 0.8V-750V4. AC/DC current: 0mA-10A5. Resistance: 0Ω-60MΩ6. Capacitance: 0.0mF-100.0mF7. Count: 60008. Automatic shutdown: the meter will automatically shut down after 15 minutes of inactivity to save power.9. Comfortable grip with anti-slip textured design for easier measurement; ergonomic design.10. High-definition backlit screen ensures clear visibility in complex environments; flashlight illumination eliminates the fear of not being able to see the measurement location.11. The meter is powered by a built-in 3.7V lithium battery and comes with a TYPE-C charging cable.12. Switch to LIVE mode and use the red probe to measure. When it touches the live wire, a progress bar will appear on the screen, accompanied by a beep; the neutral wire will not react.13. Connect the positive and negative terminals of the temperature wire to the instrument, and touch the other end to the object being measured. The real-time temperature will be displayed, providing clear data and easy operation.14. Switch to the NCV setting. When AC voltage is detected, a beeping alarm will sound; the closer the object, the more rapid the alarm.15. Dimensions: 14.5 x 7 x 1.9 cm16. Weight: 162gSpecification: Package Weight One Package Weight 0.41kgs / 0.90lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 72 Carton Weight 30.30kgs / 66.80lb Carton Size 47cm * 34cm * 32cm / 18.5inch * 13.39inch * 12.6inch Loading Container 20GP: 521 cartons * 72 pcs = 37512 pcs40HQ: 1210 cartons * 72 pcs = 87120 pcs

Read more less

1. Using heavy gold PCB, machine welding process to ensure quality2. Chip built-in 16bit AD converter, 16-bit data output3. Communication method: standard IIC/SPI communication protocol4. Power supply: 3-5v5. Use chip: MPU-92506. Pin spacing: 2.54mm7. Size: 15x25mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 6cm * 3cm * 2cm / 2.36inch * 1.18inch * 0.79inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 23cm * 15cm / 18.5inch * 9.06inch * 5.91inch Loading Container 20GP: 1644 cartons * 500 pcs = 822000 pcs40HQ: 3817 cartons * 500 pcs = 1908500 pcs

Read more less

1. Pixel: 64 x 32=2048 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: V / 2.5A (VH4 connector input)9. Power: within 12W10. Size: 16 x 8cmFeatures:1. 2048 independent RGB led, full color display, adjustable brightness2. 64x32 pixels, 2.5mm pitch, allows displaying text, color images or animations 3. 160x80mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 10cm * 2cm / 7.87inch * 3.94inch * 0.79inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

1. Input voltage: 6.5-36V (the input voltage is lower than 6.5V, the current accuracy is inaccurate, and the LCD display is abnormal if it is lower than 5.5V)2. Output voltage: 1.2-32V, the default output is 5V step-down type, the output voltage can only be lower than the input voltage, and the voltage difference is more than 2V3. Output current: It can work stably at 3.5A for a long time, and it can reach about 4.5A with fan enhanced heat dissipation (adjustable limit current can reach about 4.2-4.5A)4. Output power: natural heat dissipation 50W (within 3.5A), plus fan to enhance heat dissipation 75W5. Voltage display: resolution 0.05V, range 1.2-32V6. Current display: resolution 0.005A, range 0-4.5A7. Conversion efficiency: about 94%, depending on the voltage difference and current efficiency8. Working current: about 30mA9. Input reverse polarity protection: yes10. Anti-backflow at the output: no (if charging the battery, first power on the module and then connect the battery, and ensure that the battery voltage is lower than the output voltage; if possible, connect an anti-backflow diode in series with the output positive pole)11. Short circuit protection: yes12. Size: about 70.5x48.4x28mm13. Weight: about 65g Features:1. Crystal shell, beautiful design, good touch texture of buttons, and output voltage set by button2. The button can control the output to turn off and on, and can set the power-on default to ON or OFF3. LCD can display input and output voltage, output current and output power4. The input terminal is protected against reverse connection, and the reverse connection will not burn5. High efficiency, high current, low heat generation, constant current value can be adjusted around 0-4.5A, suitable for office power supply, high-power LED constant current drive, lithium battery charging, etc.Function Description:1. There are IN/OUT and ON/OFF buttons on the left side of the module: the IN/OUT button switches the display of input voltage and output voltage, long press to switch the display of output current and output power; the ON/OFF button controls the output ON or OFF, long press Press to set the default output state is ON or OFF at the next power-on2. There are +/- two buttons on the right side of the module: + button press the output voltage to increase 0.05V, long press to continuously increase, and then long press to continuously increase 0.1V, 1V in slow steps; - button press the output voltage Decrease 0.05V, long press to continuously decrease, and then long press to continuously decrease 0.1V, 1V in slow steps3. ADJ-I is the current setting potentiometer. Turn clockwise to increase the set current. When the load current reaches the set current, it enters the constant current state, and the CC constant current indicator (red) lights up. The OUT indicator is the output status indicator, it is on when there is voltage at the output terminal, otherwise it is off; the CHAR indicator is the charging indicator, which is on when charging, and the FULL indicator is the full indicator. If the set constant current value is 2A, charging When the current reaches below 0.2A, turn the light, the FULL indicator is on, and the CHAR indicator is offInstructions:1. Use as an ordinary step-down module with overcurrent protection capability- Press the button to set the output voltage to the desired voltage value- Rotate the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (connect the two test leads directly to the output terminal), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the overcurrent protection value you want to set. (For example, the current value displayed by the multimeter is 2A, then the current can only reach 2A when the module is used, and the red constant current indicator light is on when the current reaches 2A, otherwise the indicator light is off) 2. Use as a battery charger- The module without constant current function cannot be used to charge the battery. Because the voltage difference between the exhausted battery and the charger is very large, the charging current is too large and the battery is damaged, so the battery should be used at the beginning. Constant current charging, when the charging reaches a certain level, it will automatically switch back to constant voltage charging- Determine the float voltage and charging current of the battery to be recharged; (if the lithium battery parameter is 3.7V/2200mAh, then the float voltage is 4.2V, and the charging current can reach 1C, that is, 2200mA)- Under no-load conditions, the output voltage of the button reaches the floating charge voltage; (if charging a 3.7V lithium battery, adjust the output voltage to 4.2V)- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined charging current value- Connect the battery and charge (when setting: no battery is connected to the output terminal)3. Used as a high-power LED constant current driver module- Determine the operating current and operating voltage needed to drive the LED- Under no-load conditions, press the button to set the output voltage to reach the LED working voltage- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined LED operating current- Connect the LED, test the machine (when setting: output no-load, do not connect the LED light) Precautions: 1. It is forbidden to short-circuit the input IN- of the module with the output OUT-, otherwise the constant current function will fail 2. Make sure that the power of the power supply is always greater than the power required by the output load. When the module is seriously hot, please reduce the power usage.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs40HQ: 412 cartons * 404 pcs = 166448 pcs

Read more less

1. Microphone and headphone splitter turns a 3.5mm combo headphone/microphone port into two distinct ports. 2. Just plug in your Microphone into the audio input port marked with the Microphone symbol, plug your powered speakers into the audio output port marked with the headphone symbol and connect the adapter to the audio port on your devices. 3. Compact design for maximum portability. 4. Lightweight, yet sturdy design that can easily be plugged in when required.Specification: General Compatible with Apple: iPhone 4S, iPod touch 4, iPhone 4, iPad Apple: iPad 2 Connector 3.5mm Cable Length 16cm Product Size 3.2*1.7*1cm Weight 4g Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch Qty per Carton 300 Carton Weight 3.60kgs / 7.94lb Carton Size 32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch Loading Container 20GP: 1721 cartons * 300 pcs = 516300 pcs40HQ: 3996 cartons * 300 pcs = 1198800 pcs

Read more less

1. Frequency range: - FM 64-108MHz - MW 522-1620KHz(9K) 520-1710KHz(10K) 2. Sensitivity: FM <=8uV MW <=20mV/M 3. Signal to Noise Ratio: FM >=30dB MW >=40dB 4. Memory quantity: 58 units(each band: 29 units) 5. Output the maximum power: 6.5MW 6. Power supply: 500MA 3.7V the lithium battery 7. External earphone: 3.5mm/32ohmx2 8. Battery life: 15 hours 9. Size: 84 x 48 x 12mm 10. Standard accessories: usb cable/headset/rope/color box/manualSpecification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 10cm * 7cm * 5cm / 3.94inch * 2.76inch * 1.97inch Qty per Carton 60 Carton Weight 7.20kgs / 15.87lb Carton Size 42cm * 27cm * 26cm / 16.54inch * 10.63inch * 10.24inch Loading Container 20GP: 904 cartons * 60 pcs = 54240 pcs40HQ: 2099 cartons * 60 pcs = 125940 pcs

Read more less

Features1. Payload capacity of 280g/9.9oz 2. Support Native Camera Control 3. Instant Portrait and Landscape Transition 4. All-in-one Intuitive Panel 5. Magic Mode-- built-in creative shooting templates 6. Always In Focus 7. Smart Gesture Control 8. No Bigger than Your Palm 9. Advanced Shooting Modes: Fast Tracking, Slow Motion, Time-lapse, Inception Mode, Sport Gear Mode, Vertigo Mode 10. Ergonomic Design 11. Craftsmanship in Every Detail 12. Expand the PossibilitiesSpecification1. Gimbal Weight: 412g 2. Payload: 280g 3. Gimbal Dimensions(normal): 120x120x265(WxDxH) mm 4. Gimbal Dimensions(folded): 145x50x180mm 5. Mechanical Angles: - Pan : 340 degree - Roll: 300 degree - Tilt: 140 degree 6. Battery: - Standard Voltage: 7.4V - Capacity: 2000mAh - Battery Life: 20 Hours (under balanced status) - Charging Time: 2.5 Hours 7. Supported Phones: Suitable for OnePlus 10 Pro, OnePlus 8 Pro, OnePlus 7T, Honor 30, Honor V20, Honor 20, Honor 20 Youth Edition, Honor 10, Honor 8X, Honor Magic2, iPhone 11, iPhone XS MAX, iPhone 8p, HUAWEI P40 Pro+, HUAWEI P40 Pro 5G, HUAWEI P30 Pro, HUAWEI P30, HUAWEI Mate 30 5G Pro, HUAWEI Mate 20(UD), HUAWEI Mate 9, HUAWEI Nova 7 Pro 5G, HUAWEI Nova 5i Pro, HUAWEI Nova 5 Pro, Xiaomi 10, nubia Z17 Mini,VIVO X50, VIVO X27, Samsung Galaxy Z Flip, Samsung Galaxy S9, Samsung Galaxy S20+, Samsung Galaxy Note10+ 5G (More phones are being tested. For more compatible plans please follow up with the updates). Supported smartphone width of 60~88 mm 8. Bluetooth: V5.1 9. Bluetooth Control Range: 5m 10. App Functions: Built-in Camera Control, App Camera, Camera Control, Zoom control (Button zoom, Automatic zoom), Focus Control, Object Tracking, Time-lapse, Panorama, Smart Gesture Control, Slow Motion, Manual Mode, Quick Look Back, Automatic editing/template shooting 11. Gimbal Functions: Inception Mode, PhoneGo, Vertical Mode (Automatic rotation), Re-center, Follow Functions(All-locked, Tilt follow, Yaw follow, FPV model)Specification: General Compatible with Apple: iPhone 12, iPhone 12 Pro Max, iPhone 12 mini, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone 6 Plus Samsung: Galaxy A72 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S21 5G, Galaxy A02s, Galaxy A12, Galaxy S20 FE 5G, Galaxy Note20 5G, Galaxy Note20 Ultra 5G, Galaxy Note20, Galaxy Note20 Ultra, Galaxy M01, Galaxy S20+ 5G, Galaxy S20 Ultra 5G, Galaxy S20 5G, Galaxy A31, Galaxy M11, Galaxy S20 Ultra, Galaxy S20+, Galaxy S20, Galaxy A90 5G, Galaxy Note10+ 5G, Galaxy A90, Galaxy A60, Galaxy S10 5G, Galaxy A40, Galaxy A10, Galaxy A50, Galaxy M30, Galaxy S10+, Galaxy S10e, Galaxy S10, Galaxy S6 Huawei: P40, P30, P20, P10 Honor: V30, 20 Pro, 20, 10 Model Mini MX Battery 7.4V Capacity 2000mAh Gimbal Weight 416g Load Capacity 280g Package Weight One Package Weight 0.78kgs / 1.71lb One Package Size 25cm * 15cm * 6cm / 9.84inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 15.10kgs / 33.29lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 20 pcs = 10000 pcs40HQ: 1162 cartons * 20 pcs = 23240 pcs

Read more less

MIRA SALES | HOME & OFFICE POWERPower More. Charge Smarter. Stay Ready. A multifunctional 5+4 port charging socket combining everyday mains power with fast USB charging in one practical desktop solution. 2500WRated power 20WPD output 9 PORTS5+4 configuration 2mPower cable ⚡ One Hub for Everyday Power Keep compatible appliances, chargers and devices organised around one compact charging station. High-quality copper construction is specified for conductivity, while the thicker cable is designed for lower resistance. 🔒 Designed with Safety in Mind A built-in child safety door helps prevent accidental contact with the socket openings. Use within the stated electrical ratings and local requirements. 📱 USB Fast Charging USB outputs include PD up to 20W, QC up to 18W and USB-A output up to 12W, subject to compatible devices and charging protocols. 🔄 Auto Rotation 📸 More Product Photos 🔧 Key Specifications Input: 100–250V, 10A, 50/60Hz Rated: 2500W, 10A max, 250V PD: 5V/3A, 9V/2.22A, 12V/1.67A, 20W QC: 5V/3A, 9V/2A, 12V/1.5A, 18W USB-A: 5V/2.4A, 12W max Power cord: 200cm Product size: 27.7 × 8.1 × 3.4cm 📦 Package Details Package weight: 0.70kg / 1.55lb Package size: 34 × 12 × 5cm Carton quantity: 42 Carton weight: 30kg / 66.14lb ⭐ MIRA SALES TIPFor best charging performance, match the connected device with a compatible USB charging protocol and stay within the socket's rated load. ✅ A Smarter Everyday Charging Station One practical power hub for home, office and travel setups.

Read more less

1. Pogo Pin Contactless Wireless Charging: Simply place your phone into the dock, and it automatically positions itself for convenient charging via the Pogo Pin.2. 10W Dual-Output Charging: While charging your phone via the Pogo Pin, you can connect the spare USB-A port to a USB data cable to charge other devices, such as phones, tablets, and iPads.3. 2-in-1 Charging Stand: The vertical design not only serves as a phone stand, but also offers additional conveniences beyond charging, such as easy access and placement, and easy access to incoming notifications via facial unlock. Its compact size makes it easy to carry.4. Suitable for Ulefone Armor Pad 4 Ultra: The charging dock is sturdy and stable, with a weighted base and non-slip rubber pads. Compatible with Ulefone Armor Pad 4 Ultra, it stands firmly.5. Input Port: Type-C6. Output Port: Pogo Pin / USB-ASpecification: General Compatible with Ulefone: Armor Pad 4 Ultra Thermal, Armor Pad 4 Ultra Package Weight One Package Weight 0.30kgs / 0.66lb One Package Size 11cm * 8cm * 7cm / 4.33inch * 3.15inch * 2.76inch Qty per Carton 60 Carton Weight 18.40kgs / 40.56lb Carton Size 42cm * 35cm * 30cm / 16.54inch * 13.78inch * 11.81inch Loading Container 20GP: 604 cartons * 60 pcs = 36240 pcs40HQ: 1403 cartons * 60 pcs = 84180 pcs

Read more less