Search results for "trending electronics"

1. 1080P FHD can bring more light and dark details to the picture, the contrast and layering are improved, and the sharpness, brightness and color are significantly improved. 2. Full-featured Type-C interface, support for power supply, signal transmission. 3. It can rotate 0-90 degrees, which improves the portability of the product. 4. 10mm slim body, 4.8mm narrow border, not only can be placed on the bed to play games, watch movies, but also to travel, travel. 5. Non-slip, wear-resistant and dirt-resistant. Specification 1. Screen size: 14 inch 2. Resolution: 1920x1080P 3. Aspect Ratio: 16:9 4. Display Type: LCD 5. Panel type: IPS full view 6. Speaker: Dual Built-in Speakers 7. Product size: 324x209x5.2mm 8. 8. Product weight: 650gSpecification: Package Weight One Package Weight 1.80kgs / 3.96lb One Package Size 42cm * 28cm * 6cm / 16.54inch * 11.02inch * 2.36inch Qty per Carton 16 Carton Weight 28.00kgs / 61.73lb Carton Size 44cm * 50cm * 38cm / 17.32inch * 19.69inch * 14.96inch Loading Container 20GP: 318 cartons * 16 pcs = 5088 pcs40HQ: 740 cartons * 16 pcs = 11840 pcs

Read more less

1. Three-in-one electronic clock module, integrating three practical functions: time, thermometer and voltmeter2. Using RX8025T clock chip, the timing accuracy is stable3. The lengthened temperature probe can effectively solve the problem that the temperature affected by the module temperature is not accurate enough4. Power supply voltage: DC5.0-30V5. Temperature function range: -40-120 degrees Celsius, resolution 0.16. Voltmeter function range: DC5-30V (requires pure DC power supply, it is not recommended to use 24V battery, because the voltage may be too high during charging and burn)7. Size: about 4x1.4x1.3cmFunction and usage instructions:1. Adjust time, date, year, voltage error, temperature error cycle display item definition, alternate display interval time2. In the non-setting state, press the left key to enter the time adjustment (note that the colon in the middle is bright):- At this time, the minute bar starts to flash, press the right button to increase, the adjustment range is 00-59, after adjusting, press the left button again, the hour bar starts to flash, press the right button to increase, the adjustment range is 00-23- After adjusting the hour, press the left button again to enter the date adjustment (note that the colon in the middle is off), at this time the date column starts to flash, press the right button to increase, the adjustment range is 1-31, after the date is adjusted, press the left button again key, the month column starts to flash, press the right key to increase, the adjustment range is 1-12, after adjusting the date, press the left key again, the year column starts to flash, press the right key to increase, the adjustment range is 2012-2049- After adjusting the year, press the left key again to enter the error calibration function of the displayed voltage, the unit is 0.1V, a positive number means increase, and a negative number means decrease- Then press the left key again to enter the temperature error calibration setting, press the right key to increase, a positive number means increase, a negative number means decrease, the unit is Celsius- Press the left button again to enter the definition function dd option of the display item in the cycle display state,Press the right button to change the value: (dd:0) time + temperature + voltage, (dd: 1) time + temperature, (dd: 3) time + voltage- Press the left button again to enter the cycle display alternate interval time dF option, press the right button to change the value, the larger the value, the longer the interval- Press the left button again to save all the set values ??and return to the normal display state3. Switch display items: in the non-setting state, press the right key to switch the display items, and the display will switch between the time-date-temperature-voltage alternate displaySpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 6cm * 3cm * 3cm / 2.36inch * 1.18inch * 1.18inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 23cm * 23cm / 18.5inch * 9.06inch * 9.06inch Loading Container 20GP: 1072 cartons * 500 pcs = 536000 pcs40HQ: 2489 cartons * 500 pcs = 1244500 pcs

Read more less

Features1. Resistive touch screen TFT LCD, 4inch, 480x320 resolution2. Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO3. Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control4. PWM backlight control, allows to adjust the backlight to a comfortable level5. Micro SD slot, provides an easy way to store photos for displaying6. Controlled via SPI, only a few Arduino pins are used7. Comes with STM32 and Arduino examples, convenient for portingKey Parameters1. LCD Type: TFT2. LCD Interface: SPI3. LCD Controller: ILI94864. Touch Screen Type: Resistive5. Touch Screen Controller: XPT20466. Colors: RGB, 65K colors7. Resolution: 480x320 (Pixel)8. Aspect Ratio: 8:59. I/O Voltage: 3.3V/5VWiki : www.waveshare.com/wiki/4inch_TFT_Touch_ShieldSpecification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 10cm * 7cm * 2cm / 3.94inch * 2.76inch * 0.79inch Qty per Carton 600 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 35cm * 40cm / 23.62inch * 13.78inch * 15.75inch Loading Container 20GP: 317 cartons * 600 pcs = 190200 pcs40HQ: 736 cartons * 600 pcs = 441600 pcs

Read more less

1. Linkage control of smart devices to create smart home application scenarios 2. Built-in professional-grade Bluetooth Mesh gateway, the network is stable and reliable, and can connect 200 Bluetooth Mesh devices and 100 Bluetooth devices at the same time. 3. Built-in Bluetooth signal amplifier, wider signal coverage 4. Equipped with quad-core processing chip and built-in 4GB storage space to ensure real-time data calculation and reserved expansion 5. Support RJ45 wired direct connection and 2.4G/5G dual-band WiFi Parameter: 1. Model: ZSWG01CM 2. Product size: 87x87x30.5mm 3. Product weight: 279g 4. Power input: 12V 1A 5. Working temperature: -5 - 50 degree Celsius 6. Working humidity: 0%-95%RG no condensation 7. Wired connection: 10/100Mbps adaptive network port 8. Wireless connection: WiFi IEEE 802.11a/b/g/n/ac 2.4GHz/5GHz, Bluetooth 5.0 9. Support system: Android 7.0 or iOS11.0 and above Package list: 1 x Gateway 1 x Network cable 1 x Power adapter 1 x User manualSpecification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 10cm * 10cm * 8cm / 3.94inch * 3.94inch * 3.15inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 22cm * 42cm / 16.54inch * 8.66inch * 16.54inch Loading Container 20GP: 687 cartons * 40 pcs = 27480 pcs40HQ: 1595 cartons * 40 pcs = 63800 pcs

Read more less

1. This product is a high-performance, highly integrated microcontroller development board independently designed by Waveshare. Within its compact form factor, it integrates peripherals including a 3.5-inch capacitive HD IPS display, highly integrated power management IC, low-power audio codec, camera interface, 6-axis IMU (3-axis accelerometer + 3-axis gyroscope), RTC, and Micro SD card slot, facilitating development and product integration. 2. Features Raspberry Pi-designed RP2350B microcontroller chip 3. Unique dual-core/dual-architecture: Dual ARM Cortex-M33 cores + dual Hazard3 RISC-V cores, both operating at up to 150MHz, enabling flexible architecture switching 4. Built-in 520KB SRAM and 16MB on-chip Flash 5. Type-C interface eliminates orientation concerns 6. Onboard 3.5-inch capacitive touch HD IPS screen with 320 × 480 resolution and 65K colors for clear image display 7. Integrated ST7796 display driver and FT6336 capacitive touch controller using SPI and I2C interfaces respectively, minimizing pin consumption 8. Camera interface compatible with mainstream modules (e.g., OV2640, OV5640) for image/video capture 9. Onboard 3.7V MX1.25 lithium battery charge/discharge interface 10. USB 1.1 host/device support 11. Low-power sleep/hibernation modes 12. Programmable via drag-and-drop when recognized as USB mass storage 13. 22 multifunctional GPIO pins: 2×SPI, 2×I2C, 2×UART, 7×12-bit ADC, 18×PWM channels 14. Precision on-chip clock/timer modules 15. Built-in temperature sensor for real-time chip monitoring 16. 12 programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 48 Carton Weight 5.90kgs / 13.01lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 48 pcs = 31728 pcs40HQ: 1535 cartons * 48 pcs = 73680 pcs

Read more less

1. Can be used as a sound source to connect to Bluetooth headsets and speakers2. E-book portable e-book, multiple functions, just to give you a better reading experience3. It is also a radio, stable and reliable, not easy to disconnect, listen to popular broadcasts anytime, anywhere4. 360-degree wheel design, easy operation5. Equipped with AB repeat +/-8-level variable speed playback, a good partner for practicing oral English6. Small size, easy to carry7. Fully charged in 20 minutes, can be put continuously for 38 hours, charged for 5 minutes, can be played continuously for 6 hours8. Support OTG mobile phone interconnection9. Display: 1.2-inch OLED color display, resolution: 800*48010. Music format: MP3.WMA.WAV, APE, FLAC11. Bluetooth version: 4.212. EQ sound effects: normal, rock, funk, hiphop, jazz, classical, electronic music, custom13. Lyric format: LRC14. E-book: TXT, LRC15. FM radio: 87.5MHz-108MHz/76MHz-90MHz16. Recording format: MAV, MP317. Frequency range: 20Hz-20KHz18. Signal to noise ratio: greater than or equal to 90dB19. Battery capacity: 170mah20. Menu language: Simplified Chinese, Traditional Chinese, English, Korean, Japanese and other languages21. Size: 3.8x3.7x1cmSpecification: Package Weight One Package Weight 0.18kgs / 0.40lb One Package Size 11cm * 8cm * 5cm / 4.33inch * 3.15inch * 1.97inch Qty per Carton 160 Carton Weight 25.76kgs / 56.79lb Carton Size 44cm * 32cm * 50cm / 17.32inch * 12.6inch * 19.69inch Loading Container 20GP: 378 cartons * 160 pcs = 60480 pcs40HQ: 879 cartons * 160 pcs = 140640 pcs

Read more less

4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600E-HApplicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.2. Please check the supported bands according to your local service provider, select the proper one when placing order.Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.3. Support GPS, BeiDou, Glonass, LBS base station positioning4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on5. Onboard CP2102 USB to UART converter, for serial debugging6. Breakout UART control pins, to connect with host boards like Arduino/STM327. SIM card slot, supports 1.8V/3V SIM card8. Onboard audio jack and audio decoder for making telephone call9. 2x LED indicators, easy to monitor the working status10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper11. Baudrate: 300bps ~ 4Mbps (default: 115200bps)12. Autobauding baudrate: 9600bps ~ 115200bps13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)14. Support SIM application toolkit: SAT Class 3, USAT15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Communications Specifications1. Band: - LTE-- SIM7600A-H: --- LTE-FDD B2/B4/B12-- SIM7600E-H: --- LTE-FDD B1/B3/B5/B7/B8/B20--- LTE-TDD B38/B40/B41-- SIM7600CE-T: --- LTE-TDD B38/B39/B40/B41--- LTE-FDD B1/B3/B8- WCDMA / TD-SCDMA / CDMA 2000-- SIM7600A-H: --- UMTS/HSPA+ B2/B5-- SIM7600E-H: --- UMTS/HSPA+ B1/B5/B8-- SIM7600CE-T:--- UMTS/HSDPA/HSPA+ B1/B8--- TD-SCDMA B34/B39 --- CDMA 1X/EVDO BC0- GSM/GPRS/EDGE 900/1800 MHz2. Generation: 4G, 3G, 2.5G, 2G3. Emitting power: 0.25W, 0.5W@EGSM900, 0.4W@DCS1800, 2W@GSM900, 1W@DCS18004. Data Speed- LTE CAT 4-- Uplink=<50 Mbps-- Downlink=<150 Mbps- UMTS-- Uplink=<384Kbps-- Downlink=<384Kbps- EDGE-- Uplink=<236.8kbps-- Downlink=<236.8kbps- GPRS-- Uplink=<85.6kbps-- Downlink=<85.6kbps- HSPA+-- Uplink=<5.76Mbps-- Downlink=<42MbpsGNSS Specifications1. Receiver type- 16-channel- C/A code2. Sensitivity- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)- Cold starts: -148 dBm3. Time-To-First-Fix (open air)- Cold starts: <35s- Hot starts: <1s4. Accuracy- Position: <2.5m CEPSMS and Audio Specifications1. SMS- Support types: MT, MO, CB, Text, PDU- Storage: USIM card and ME (default)2. Audio feature- Support echo cancellation- Support noise reductionOther Specifications1. Power supply: 5V2. Operating voltage: 5V/3.3V (configured via jumper)3. Operating temperature: -30 degree C ~ 80 degree C4. Storage temperature: -45 degree C ~ 90 degree C5. Dimension: 56.21mm x 65.15mmWhat is on Board1. SIM7600E-H2. CP2102 USB to UART converter3. NAU8810 audio decoder4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V5. MP2128DT power chip6. MP1482 power chip7. Raspberry Pi GPIO header: for connecting with Raspberry Pi8. SIM7600 control interface: for connecting with host boards like Arduino/STM329. SIM card slot: supports 1.8V/3V SIM card10. TF card slot: allows file/SMS/... storage11. 3.5mm earphone/mic jack12. USB interface: for testing AT Commands, getting GPS positioning data, etc.13. USB to UART interface: for serial debugging, or login to Raspberry Pi14. MAIN antenna connector15. AUX antenna connector16. GNSS antenna connector17. Power switch18. Network status indicator19. Power indicator20. Operating voltage selection jumper: - VCCIO - 3.3V: set operating voltage as 3.3V- VCCIO - 5V: set operating voltage as 5V21. UART selection jumper: - A: Access Raspberry Pi via USB to UART- B: Control the SIM7600 by Raspberry Pi- C: Control the SIM7600 via USB to UARTPackage Contents1. SIM7600E-H 4G HAT x12. LTE Antenna x13. GPS External Antenna (B) x14. USB type A plug to micro plug cable x25. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 68.38kgs / 150.75lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs

Read more less

1. Built-in ST7735 driver chip2. 0.85-inch IPS display with 128 x 128 resolution, 65K color, high-definition display image3. SPI communication interface, simple interface, occupies few IO resources, convenient for embedded development4. 2.5D tempered glass panel, good light transmission, scratch-resistant and durable; edge arc design, smooth hand feel5. Mechanical key structure, pressing feels crisp, capable of coping with high-frequency usage6. Supports development on platforms such as Raspberry Pi, Arduino, ESP32, RP2040, STM32, etc., and provides complete supporting materials and sample programsParameters1. Working voltage: 3.3V2. Display color: 65K3. Display panel: IPS4. Communication interface: 4-wire SPI5. Resolution: 128 x 128 pixels6. Display size: 15.21 x 15.21mm7. Pixel pitch: 118.8 x 118.8 micrometers8. Control chip: ST7735Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 5cm * 4cm * 3cm / 1.97inch * 1.57inch * 1.18inch Qty per Carton 860 Carton Weight 27.00kgs / 59.52lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 860 pcs = 377540 pcs40HQ: 1019 cartons * 860 pcs = 876340 pcs

Read more less

1. Start-up measurement, intelligent identification, non-contact measurement 2. Three-in-one multimeter + electric tester + phase sequence detector 3. Phase sequence induction detection: put the nibs close to the phase line ABC test points respectively, the green indicator light turns on, and the screen displays R, indicating that it is forward direction; the result, the red indicator light turns on, and the screen displays L, indicating that it is reverse direction 4. Line breakpoint detection: In the NCV non-contact voltage detection mode, check the breakpoint position along the line when the single-strand line is charged 5. Fine stainless steel watch needle: the negative input terminal is closely connected with the test lead, which is firm and durable, and is suitable for circuit maintenance and testing of various electrical appliances and small electronic components 6. In NCV mode, when a nearby AC voltage is detected, the LED indicator light will be red, and an alarm buzzer will sound, making it safer to measure electricity without contact 7. Intelligent identification of neutral and live wires: Select the function of distinguishing live neutral and live wires, insert the pen needle into the hole for identification, no need for traditional contact measurement methods, and it is safer to measure electricity 8. Portable and compact, easy to use, pen-style design 9. Detachable positive pen tip: silver-plated, anti-oxidation, not easy to break and wear, just clamp the stainless steel pen tip with pliers and rotate it out, equipped with a cap protection 10. Battery type: 2 x AAA batteries (not included in the product) 11. Screen display: HD backlit screen 12. AC/DC voltage: 600V 13. Measurement function: resistance, AC voltage, DC voltage 14. Counting: 4000 counts 15. Resistance: 40 megohms 16. Dimensions: 183.5 x 24 x 29mm 17. Weight: 57gSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 5cm * 5cm / 7.87inch * 1.97inch * 1.97inch Qty per Carton 190 Carton Weight 19.40kgs / 42.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 190 pcs = 52630 pcs40HQ: 644 cartons * 190 pcs = 122360 pcs

Read more less

1. Power-on configuration: 5 preset items2. Expansion interface: USB transmission interface3. Language version: Chinese/English/Russian/Portuguese4. Screen size: 7 inches5. Screen resolution: 1024x600 high resolution6. Charging requirements: QC18W, 12V/1.5A7. Screen technology: IPS full viewing angle8. Battery specifications: 3.7V/8000mAh9. Interaction mode: capacitive touch screen10. Standby time: about 3 hours11. Charging time: about 5 hours12. Heat dissipation method: air cooling13. Power consumption of the whole machine: 10W14. Number of channels: 215. Probe magnification: 1X/10X/100X16. Analog bandwidth: 350MHz17. Hardware bandwidth limit: 150M/20M18. High resolution mode: 8bit-16bit19. Maximum sampling rate: 1GSPS20. Parameter measurement: 12 types21. Storage depth: 60Kpts22. Data can be exported and firmware upgraded via USB23. High-voltage design, capable of withstanding voltage of more than 400V at any gear without burning24. Three trigger modes: automatic, single, and regular. Single and regular modes can capture burst signals, and automatic mode is mainly used to measure periodic signals25. Built-in efficient control algorithm, automatic identification of signal characteristics26. Built-in 1Gbit storage space, capable of secondary analysis of saved signalsSpecification: Package Weight One Package Weight 1.60kgs / 3.54lb One Package Size 25cm * 20cm * 10cm / 9.84inch * 7.87inch * 3.94inch Qty per Carton 12 Carton Weight 20.20kgs / 44.53lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 12 pcs = 4572 pcs40HQ: 885 cartons * 12 pcs = 10620 pcs

Read more less

1. Real-time HCHO & TVOC Detection2. HCHO range: 0–2000?ppm (electrochemical sensor)3. TVOC range: 0–10?mg/cubic meters (semiconductor sensor)4. Audible/visual alerts when thresholds exceeded; default thresholds: 0.08?mg/cubic meters for HCHO and 0.30?mg/cubic meters for TVOC5. Comprehensive Air Quality Assessment6. Displays formaldehyde safety in 5 grades 7. Includes temperature, humidity, and real-time clock display8. Records past data for trend analysis9. Calculates spatial averages across monitored spaces10. Estimates remediation time, cost, and materials based on room size 11. 2.4-inch HD tempered-glass display with adjustable backlight12. Compact and lightweight, 75×45×95?mm13. Built-in 1000?mAh lithium battery delivers 8–10?h runtime14. USB-C fast charging (5?V/2?A), fully charged in ~1.5?h15. Supports operation while chargingSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 50 Carton Weight 15.50kgs / 34.17lb Carton Size 52cm * 27cm * 32cm / 20.47inch * 10.63inch * 12.6inch Loading Container 20GP: 593 cartons * 50 pcs = 29650 pcs40HQ: 1377 cartons * 50 pcs = 68850 pcs

Read more less

1. The ESP32-C6-ePaper-1.54 is an e-Paper AIoT development board, equipped with ESP32-C6 microcontroller, which supports Wi-Fi and BLE dual-mode communication. Onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency3. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance4. Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM, and external 16MB Flash memory5. Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle6. Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications7. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring8. Onboard TF card slot for external storage of images or files9. Onboard programmable PWR and BOOT side buttons for customized function development10. Reserved 2 × 6 2.54mm pitch pin header for convenient external expansionSpecifications:1. Display Panel: E-Ink display2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs

Read more less