Search results for "electronic modules"

Parameter:1. Power supply voltage: DC 3.7-5V2. Power supply interface: MICRO USB port or 2.54mil pin port3. Length, width and height: 3.3x3.5x1.1cm4. Bluetooth name: BM35. Bluetooth password: 1688 (you need to enter the password to connect and cannot be modified)6. Communication distance: 3-12 meters (different due to environmental obstacles)7. Support Bluetooth version: Support Bluetooth 4.1 or below8. Support mobile phone system: Android, IOS system9. Channel: dual channel10. Audio quality: MP3 lossless decoding11. Built-in power amplifier: none12. External power amplifier: does not limit the small external power amplifier13. PCB thickness: 1.6mm14. Needle spacing: 2.54milFeatures:1. Have a Bluetooth connection password to prevent others from mistakenly connecting and operating.2. Ultra-small size, easy to be embedded in modified products3. Two-channel stereo output, compatible with most power amplifiers, home audio and video, car audio and other equipment in the market4. Standard MICRO MINI USB 5P interface, the same Android phone charging port can be powered by the phone data cable5. Specific DIY embedded refitting pins, which can be plugged in and soldered on your own circuit board for refitting6. High-fidelity output circuit, resistance-capacitance isolation, no noise, good sound quality7. Wireless plug-in U disk, memory card and button settings, pure mobile phone operation connection to play MP38. Equipped with 1 status pin, which can be used by professionals, such as combining single-chip microcomputer and relay switch to realize music desk lamp.Application scenarios:- Car audio modification, home audio modification- Personal DIY Bluetooth audio, electronic project production- Square dance sound, outskirt sound modificationSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 12cm * 10cm * 2cm / 4.72inch * 3.94inch * 0.79inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 100 pcs = 62000 pcs40HQ: 1439 cartons * 100 pcs = 143900 pcs

Read more less

OverviewThis solar power management module is designed for 6V~24V solar panel. It can charge the 3.7V Li battery through solar panel or USB connection, and provides 5V/1A regulated output.The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects.Features1. Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel2. Supports solar panel / USB connection battery charging3. For 6V~24V solar panel, DC-002 jack input or screw terminal input4. Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency5. Two 5V output interfaces: pinheaders and USB port6. Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance7. 14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V Li battery8. Several LED indicators, for monitoring the status of solar panel and battery9. Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to useSpecifications1. Solar panel input voltage (SOLAR IN): 6V~24V2. Micro USB input voltage (USB IN): 5V3. Pinheader / USB output (USB OUT): 5V 1A4. Charging cutoff voltage: 4.2V+/-1％5. Over discharging protection voltage: 2.9V+/-1％6. Solar panel charge efficiency: ~78%7. USB charge efficiency: ~82%8. 3.7V battery boost output efficiency: ~86%9. Max quiescent current: <2mA10. Operating temperature: -40~85C11. Dimension: 65.2mm x 56.2mm x 22.9mmSpecification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 8cm * 8cm * 2cm / 3.15inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 24.50kgs / 54.01lb Carton Size 40cm * 40cm * 40cm / 15.75inch * 15.75inch * 15.75inch Loading Container 20GP: 416 cartons * 500 pcs = 208000 pcs40HQ: 967 cartons * 500 pcs = 483500 pcs

Read more less

1. Dual decoding supports music in MP3/WMA/WAV/FLAC/APE lossless decoding format2. Support bluetooth call function, power off memory function3. Support MMC/SD/MMA and other cards, support USB interface (U disk)4. Support external audio source input LINE IN5. Support radio FM, search frequency band (87.5MHZ-108.0MHZ)6. Mobile phone Bluetooth connection matching fast, low-power decoding scheme7. Application areas: speakers, tricycles, vans, buses, trolley speakers, power amplifiers, etc.8. Bluetooth transmission distance: within 20 meters9. Radio channel: 87.5Mhz-108Mhz10. Voltage input: DC 5V11. Amplifier: 2 x 3W12. Function: Bluetooth 5.0+lossless decoding+call+radio FM+AUX+USB+TF card13. Speaker: 4 ohms, 3W14. Buttons: three-button control, VOL-/AUTO/VOL+15. Dimensions: 71 x 22mmSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi RP2040 microcontroller chip, as same as on Raspberry Pi Pico. For software development, either Raspberry Pi C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. In additional, there are also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. 0.96 inch 160x80 pixels 65K colorful IPS LCD display 6. Lithium battery recharge/discharge header, suitable for mobile devices 7. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 8. Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components) 9. USB 1.1 with device and host support 10. Low-power sleep and dormant modes 11. Drag-and-drop programming using mass storage over USB 13. 26 x multi-function GPIO pins 14. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 15. Accurate clock and timer on-chip 16. Temperature sensor 17. Accelerated floating-point libraries on-chip 18. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs40HQ: 763 cartons * 500 pcs = 381500 pcs

Read more less

1. Operating voltage: bare board version: 3.3V; Module version: 3.3V/5V 2. Communication interface: 3-wire SPI, 4-wire SPI 3. Display colors: red, yellow, black, white 4. Grayscale levels: 2 5. Fast refresh: 11 ms 6. Full refresh: 16 ms 7. Refresh power consumption: 30 mW 8. Sleep current: 0.01 μA (near 0) 9. Viewing angle: 170°10. Resolution: 296 x 128 pixels11. Display size: 66.89 x 29.05 mm12. Dot pitch: 0.135 x 0.135 mm13. Size: bare board version about 79 x 36.7 x 1.2 mm, module version about 89.5 x 38 mmFeatures:1. No backlight required; the last displayed content is retained for an extended period after power is cut off 2. Extremely low power consumption; power is consumed primarily during refresh cycles 3. Comprehensive supporting documentation provided (driver board schematics, example programs for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32, etc.) 4. The module board features an SPI control interface, allowing connection to host boards such as Raspberry Pi, Jetson Nano, Arduino, STM32, and ESP325. The module board includes an onboard level-shifting chip, making it compatible with both 3.3V and 5V microcontroller interfaces6. Suitable for retail price tags, asset and equipment tags, electronic shelf labels, and conference name badges, among other applicationsSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 8cm * 3cm / 4.72inch * 3.15inch * 1.18inch Qty per Carton 190 Carton Weight 12.40kgs / 27.34lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 190 pcs = 78280 pcs40HQ: 958 cartons * 190 pcs = 182020 pcs

Read more less

1. Can be equipped with USB adapter board, Micro USB as input, easy to use2. The voltage regulator adopts a multi-turn precision long-handle potentiometer, which can be directly adjusted manually3. With a beautiful shell, the color of the output voltage display will be shipped randomly4. Input: USB 5V male input5. Output: 1-24V6. Power: up to 3W7. Size: about 7x2.3x1.3cm8. Weight: about 25gSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 4cm * 2cm / 3.94inch * 1.57inch * 0.79inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs

Read more less

1. Support I2C protocol2. With backlight power control, you can set whether to connect the backlight power through the jumper cap. Plug in the jumper cap to connect the backlight power, unplug the jumper cap to disconnect the backlight power3. The contrast can be adjusted. Rotate the blue potentiometer to increase clockwise and decrease counterclockwise. The potentiometer is designed on the front, which is convenient for customers to adjust freely anytime and anywhere4. Modules can be cascaded, up to 8 can be cascaded. Modify the device address by shorting A0/A1/A2. The default address is 0x275. Weight: 5g6. Size: 41.5x19x15.3mm8. Power supply voltage: 2.5-6v9. Note: LCD screen is not included10. Delivery list: one IC module (pearl cotton + anti-static packagingSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 200 pcs = 94400 pcs40HQ: 1096 cartons * 200 pcs = 219200 pcs

Read more less

RS485 to Ethernet Converter, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.Features1. M0 series 32-bit ARM processor, fast speed, high efficiency2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Configurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)5. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software6. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data7. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished8. Support customized webpage, allows user to customize the module configuration page9. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change10. KeepAlive mechanism, detects broken connection, auto re-connecting11. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time12. Support DNS domain name resolution, configurable DNS server13. Support DHCP, auto-obtained IP or static IP14. Firmware is upgradable via the network15. Restore to factory settings via software and/or hardware16. Comes with default MAC address, which is customizable17. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software18. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 1.5KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client- TX cache: 6Kbyte- RX cache: 4Kbyte2. RS485:- Connector: screw terminal (A+, B-, GND)- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- RX cache: 800byte- Hardware flow control: none- Interface protection:- 2KV ESD protection- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~7.0V (5V recommended)- Operating current: 150mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -25~75 degree C- Storage temperature: -40~105 degree C5. Size: 69.65*63.59*25.47mmPackage Contents1. RS485 TO ETH x12. 5V power adapter x1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 8cm * 7cm * 3cm / 3.15inch * 2.76inch * 1.18inch Qty per Carton 455 Carton Weight 121.94kgs / 268.83lb Carton Size 56cm * 35cm * 39cm / 22.05inch * 13.78inch * 15.35inch Loading Container 20GP: 348 cartons * 455 pcs = 158340 pcs40HQ: 809 cartons * 455 pcs = 368095 pcs

Read more less

OverviewThe MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.Features1. I2C controlled, expands 2 signal pins as 16 I/O pins2. I2C address configurable by shorting the A0/A1/A2 jumpers3. Provides two connector options: PH2.0 terminal and/or solder pads, allows multi I2C modules to be stacked4. Onboard voltage translator, compatible with 3.3V/5V level5. Comes with development resources and manual (examples for Raspberry Pi / micro:bit / Arduino / STM32)Specifications1. Operating voltage: 5V/3.3V2. Interface: I2C3. Interrupt pins: INTA, INTB4. Expansion I/Os: 165. Dimension: 38mm × 23mm6. Mounting hole size: 2.0mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 52.00kgs / 114.64lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Read more less

1. USB: - USB 2.0 x 2 - USB 2.0 x 2 (via FFC connector) 2. GPIO: Raspberry Pi 40 PIN GPIO x 1 3. Header: M.2 slot x 1 4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output 5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) 6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) 7. Power input: 5V 8. FAN: 5V / 12V (no fan control) 9. RJ45 Ethernet: Gigabit Ethernet 10. CM4 slot: Suitable for all variants of Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 12. Size: 85.0 x 56.0mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 12.60kgs / 27.78lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

1. Input: 9V-36V2. Output: 5V / 3A (MAX)3. Efficiency: 92% (MAX)4. Switching frequency: 150KHZ5. Operating temperature: -40 degree C - + 85 degree C 6. Load capacity: Maximum output 3A (at the same time with two mobile phones)7. Application: mobile power, mobile phones, flat-panel USB5V powered devices8. Model: LDTR-WG02579. Material: PCB + Electronic Components10. Weight: 27g 11. Size: 7cm x 2.2cm x 2.5cm12. Package included: 1 x DC Power ModuleSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 500 pcs = 138500 pcs40HQ: 644 cartons * 500 pcs = 322000 pcs

Read more less

1. Material: Electronic components + PCB2. Working voltage: 5V3. Number of pulses per revolution: 204. The rotary encoder can count the number of output pulses during rotation in the forward and reverse directions by rotation. Unlike the potentiometer, the rotation count is unlimited. With the buttons on the rotary encoder, it can be reset to the initial state, that is, counting from 0.5. Working principle: The incremental encoder is a rotary sensor that converts the rotational displacement into a series of digital pulse signals. These pulses are used to control angular displacement. The conversion of angular displacement in the Eltra encoder uses the photoelectric scanning principle. The reading system is based on the rotation of the radial index disc (code disc) composed of alternating light-transmitting windows and opaque windows, and is simultaneously illuminated vertically by an infrared light source, and the light projects the image of the code disc onto the surface of the receiver . The receiver is covered with a layer of diffraction grating, which has the same window width as the code wheel. The receivers job is to feel the changes produced by the rotation of the disc, and then convert the light changes into corresponding electrical changes. Then the low-level signal is raised to a higher level, and a square pulse without any interference is generated, which must be handled by an electronic circuit. The reading system usually uses a differential method, that is, comparing two different signals with the same waveform but a phase difference of 180 ° in order to improve the quality and stability of the output signal. The reading is formed based on the difference between the two signals, thereby eliminating interference.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 18cm * 12cm / 5.91inch * 7.09inch * 4.72inch Qty per Carton 224 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 224 pcs = 39648 pcs40HQ: 412 cartons * 224 pcs = 92288 pcs

Read more less