Search results for "climate electronics"

Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Read more less

1. Linkage control of smart devices to create smart home application scenarios 2. Built-in professional-grade Bluetooth Mesh gateway, the network is stable and reliable, and can connect 200 Bluetooth Mesh devices and 100 Bluetooth devices at the same time. 3. Built-in Bluetooth signal amplifier, wider signal coverage 4. Equipped with quad-core processing chip and built-in 4GB storage space to ensure real-time data calculation and reserved expansion 5. Support RJ45 wired direct connection and 2.4G/5G dual-band WiFi Parameter: 1. Model: ZSWG01CM 2. Product size: 87x87x30.5mm 3. Product weight: 279g 4. Power input: 12V 1A 5. Working temperature: -5 - 50 degree Celsius 6. Working humidity: 0%-95%RG no condensation 7. Wired connection: 10/100Mbps adaptive network port 8. Wireless connection: WiFi IEEE 802.11a/b/g/n/ac 2.4GHz/5GHz, Bluetooth 5.0 9. Support system: Android 7.0 or iOS11.0 and above Package list: 1 x Gateway 1 x Network cable 1 x Power adapter 1 x User manualSpecification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 10cm * 10cm * 8cm / 3.94inch * 3.94inch * 3.15inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 22cm * 42cm / 16.54inch * 8.66inch * 16.54inch Loading Container 20GP: 687 cartons * 40 pcs = 27480 pcs40HQ: 1595 cartons * 40 pcs = 63800 pcs

Read more less

L76X Multi-GNSS HAT for Raspberry Pi, Supports GPS, BDS, QZSSOverview1. This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.2. It is an easy way to enable global positioning function for your Raspberry Pi.Features1. Support Multi-GNSS systems: GPS, BDS, and QZSS2. EASY, self track prediction technology, help quick positioning2. AlwaysLocate, intelligent controller of periodic mode for power saving3. Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)4. UART communication baudrate: 4800~115200bps (9600bps by default)5. Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts6. 4x LEDs for indicating the module working status7. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)GNSS Specifications1. Band: GPS L1(1575.42Mhz), BD2 B1 (1561.098MHz)- Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch- C/A code- SBA: WAAS, EGNOS, MSAS, GAGAN2. Horizontal position accuracy:- Autonomous: <2.5mCEP3. Time-To-First-Fix @-130dBm (EASY? enabled):- Cold starts: <15s- Warm starts: <5s- Hot starts: <1s4. Sensitivity:- Acquisition: -148dBm- Tracking: -163dBm- Re-acquisition: -160dBm5. Dynamic performance:- Altitude (max): 18000m- Velocity (max): 515m/s- Acceleration (max): 4GGeneral Specifications1. Communication interface: UART2. Baudrate: 4800~115200bps (9600bps by default)3. Update rate: 1Hz (default), 10Hz (max)4. Protocols: NMEA 0183, PMTK5. Power supply voltage: 5V / 3.3V6. Operating current: 13mA7. Operating temperature: -40 degree C ~ 85 degree C8. Dimensions: 65mm x 30.5mmApplications1. Vehicle tracking2. Asset tracking3. Security system4. Industrial PDA5. GIS applicationWhat is on Board1. L76B module2. CP2102: USB TO UART converter3. CAT24C32: EEPROM4. RT9193-33: Power manager5. Backup mode wakeup button6. Standby switch7. Indicators:- RXD/TXD: UART RX/TX indicator- PPS: GPS status indicator- PWR: Power indicator8. Raspberry Pi GPIO connector: For connecting with Raspberry Pi9. USB TO UART port10. GNSS antenna connector11. Battery holder: Support ML1220 rechargeable battery, for preserving ephemeris information and hot starts12. UART selection jumpers- A: control the L76B through USB TO UART- B: control the L76B through Raspberry Pi- C: access Raspberry Pi through USB TO UARTPackage Contents1. L76X GPS HAT x12. GPS External Antenna (B) x13. USB type A plug to micro plug cable x14. RPi screws pack (2pcs) x15. 2x20PIN pinheader x1Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs

Read more less

Description :1. Weight : 500 G2. Material : Plastic + quartz3. Size : 220 MM high, 180 MM pot surface, actual width 205 MM4. Features : Energy-saving and durable thermal energy conversion, dark light design does not hurt eyes, mute and low noise, instant heat, pitch adjustment5. Suitable for : Desktop, floor, bedroom, office, dormitory, bedside, wall hanging6. Rated voltage : 220 V7. Rated power : 200 W8. Application area : Below 10㎡9. Heating method : Quartz tube heating10. Plug specifications :GB plugSpecification: Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size 22cm * 16cm * 25cm / 8.66inch * 6.3inch * 9.84inch Qty per Carton 80 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 80 pcs = 14160 pcs40HQ: 412 cartons * 80 pcs = 32960 pcs

Read more less

1. DC voltage measurement range: 0V~620V (DC mode), 0.5V~620V (automatic mode) 0.001V, +/-(0.8%+3)2. AC voltage measurement range: 0V~620V (AC mode), 1.0V~620V (automatic mode), 0.001V, +/-(1.2%+5)3. Resistance: 1Ω-10.00Mohm, 0.1ohm, +/-(1.2%+3)4. Capacitance: 0.5uF-1000uF (+/-(3.5%+8), 1000u-6000uF, +/-(4.5%+10), 0.1μF,5. Frequency: 10HZ~1000Hz, 1Hz, +/-(2.0%+10)6. Diode: measuring diode within 1.0V7. Maximum display value: 99998. Automatic shutdown: 5 minutes9. Battery: Li-ion battery 800mAhSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 18cm * 10cm * 5cm / 7.09inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 26.00kgs / 57.32lb Carton Size 52cm * 42cm * 37cm / 20.47inch * 16.54inch * 14.57inch Loading Container 20GP: 330 cartons * 80 pcs = 26400 pcs40HQ: 766 cartons * 80 pcs = 61280 pcs

Read more less

Specification:1. Power source: USB charging/battery power2. Built-in battery: 300mAh lithium battery3. Neck strap size: 25-27 cm, suitable for most pets4. Waterproof capability: IP7 waterproof levelDescription:We will use instructions to provide you with detailed products so that you can achieve the best results in the shortest possible time. In addition, the products strong waterproof ability allows you to swim with your pet in the pool or the sea and enjoy diving.Training collars are used for training dogs, not for punishment. There are three options for dog training, beep, vibration, and static shock. Static shock is always used as the last option, or not used. If you do not want to use a static impact collar, we strongly recommend that you use the vibration training mode.Packing List:1 X remote control transmitter1 X receiver collar1 X adjustable TUP belt1 X rechargeable USB charging cable1 X charger1 X contactor1 X manualSpecification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 46cm * 46cm * 23cm / 18.11inch * 18.11inch * 9.06inch Loading Container 20GP: 547 cartons * 98 pcs = 53606 pcs40HQ: 1271 cartons * 98 pcs = 124558 pcs

Read more less

1. Printing method: thermal printing2. Resolution: 203 DPI3. Printing speed: 152 mm (6") / s4. Printing width: 108 mm (4.25")5. Printing length: 1778 mm (70")6. Central Processing Unit: 32-bit RISC CPU7. Memory: 8MB Flash Memory/8MB SDRAM/Micro SD flash memory card reader can expand the memory to 4GB8. Communication interface: USB2.0 (standard) / TF Card (optional) / serial port (optional) / WIFI (optional) / Bluetooth (optional)9. Power specification: external universal switching power supply / input: AC 100-240V, 1A, 50-60Hz / output: DC 24V, 2.5A, 60W10. Printer language: TSPL, EPL, ZPL, DPL11. Media types: continuous paper, gap paper, folded paper, perforated paper, black mark paper12. Media width: 25.4-115mm (1"-4.5 ")13. Media thickness: 0.06-0.25 mm (2.36-9.8 mil)14. Diameter of the media core: 25.4-76.2 mm (1 "- 3 ")15. Label length: 10 -1778 mm (0.39 "-70 ")16. Appearance size: 219.03x189.62x178.50mm17. Weight: 1.4kgSpecification: Package Weight One Package Weight 2.18kgs / 4.81lb One Package Size 23cm * 34cm * 21cm / 9.06inch * 13.39inch * 8.27inch Qty per Carton 6 Carton Weight 15.23kgs / 33.58lb Carton Size 76cm * 36cm * 52cm / 29.92inch * 14.17inch * 20.47inch Loading Container 20GP: 187 cartons * 6 pcs = 1122 pcs40HQ: 435 cartons * 6 pcs = 2610 pcs

Read more less

1. 2.9 inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. SPI / I2C interface, requires minimal IO pins 6. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.40kgs / 33.95lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs40HQ: 2180 cartons * 200 pcs = 436000 pcs

Read more less

1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN3. 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS4854. Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time5. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal6. Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption7. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic8. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance9. Onboard 120Ω terminal resistor, configured by jumper10. Onboard terminals and pin headers, more convenient connection11. Breakout SPI control pins, for connecting with host control boardsSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 41.00kgs / 90.39lb Carton Size 34cm * 32cm * 32cm / 13.39inch * 12.6inch * 12.6inch Loading Container 20GP: 765 cartons * 200 pcs = 153000 pcs40HQ: 1778 cartons * 200 pcs = 355600 pcs

Read more less

1. 4-inch/4.3-inch DSI touchscreen with 5-point capacitive touch control2. IPS display panel with a hardware resolution of 480×8003. Full lamination process for clearer image quality4. Toughened glass touch panel with 6H hardness5. DSI interface for LCD driving; refresh rate up to 60Hz6. Supports software-controlled backlight brightness7. Aluminum alloy back casing with a purely passive cooling design8. Default display orientation is portrait; landscape mode can be enabled via software settingsScreen Specifications:1. Resolution: 480 × 800 pixels (H × V)2. Contrast Ratio: 4-inch: 800:1; 4.3-inch: 1000:13. Display Driver IC: ST7701S4. Touch Controller IC: GT9115. Communication Interface: MIPI 2-lane6. Brightness: 4-inch: 350 cd/m2; 4.3-inch: 500 cd/m27. Outline Dimensions: 4-inch: 108.30 × 65.10 mm; 4.3-inch: 116.50 × 68.90 mm8. Display Area: 4-inch: 86.40 × 51.84 mm; 4.3-inch: 93.60 × 56.16 mmSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 10cm * 3cm / 4.72inch * 3.94inch * 1.18inch Qty per Carton 120 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 120 pcs = 62400 pcs40HQ: 1209 cartons * 120 pcs = 145080 pcs

Read more less

1. Measuring range: 0.01-200uT/0.1-2000mG2. Frequency range: 30-1000Hz3. Measuring range: 1-2000V/m4. Range: 2000V/m5. Resolution: 1V/m6. Frequency range: 50MHz-3.5GHz7. Automatic shutdown: about 15 minutes8. Usage environment: 0-40 degrees Celsius9. Battery: 3x1.5V AAA battery (not included in this product)10. When the device detects a magnetic field, it will display different backlight colors according to the size of the measurement value to remind the user11. Suitable for household appliances working within the power frequency range12. Small size, does not take up space, easy to carry aroundSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 18cm * 9cm * 6cm / 7.09inch * 3.54inch * 2.36inch Qty per Carton 75 Carton Weight 18.25kgs / 40.23lb Carton Size 56cm * 47cm * 32cm / 22.05inch * 18.5inch * 12.6inch Loading Container 20GP: 316 cartons * 75 pcs = 23700 pcs40HQ: 735 cartons * 75 pcs = 55125 pcs

Read more less

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less