Search results for "home security gift"

Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range CDMA 850MHz, Uplink 824-849MHz, Downlink 869-894MHz Gain Uplink 58-62dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual 1 x Signal Booster Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 51cm * 25cm * 10cm / 20.08inch * 9.84inch * 3.94inch Qty per Carton 6 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 52cm * 32cm / 20.47inch * 20.47inch * 12.6inch Loading Container 20GP: 308 cartons * 6 pcs = 1848 pcs40HQ: 715 cartons * 6 pcs = 4290 pcs

Read more less

About The Product1. PSE series PoE switches not only in price can be mount and desk-top installation comparable to ordinary switch, and, compared to those only work in 0 degree C ~50 degree C environment, plastic shell household switches, they specifially for the network system needs uninterrupted work, such as the IPC security system. 2. All models feature stable performance,come with dual surge protection circuits, so that the MTBF of these switches reaches 150K hours. Usually, these functions are ordinary business switches on the market do not have . 3. The aluminum housing of PSE series switches designed to be very compact, so you can easily put them in a small power supply box. Therefore, they are ideally suited for small projects or home security systems.Features1. Metal aluminium housing supports wall mount and desk-top installation. 2. Unique thermal design, wide operating temperature range -30 degree C ~ 70 degree C. 3. MTBF up to 150K hours, designed for 24-hours-working surveillance system. 4. Maxium PoE output up to 20W/port. 5. Plug and play installation, non-professional can quickly install it.Standards Conformance- IEEE 802.3af & IEEE 802.3at Power over Ethernet - IEEE 802.3 10Base-T - IEEE 802.3u 100Base-TX - IEEE 802.3x Flow Control and Back pressure - IEEE 802.1d Spanning Tree Protocol - IEEE 802.1Q VLAN Tagging - IEEE 802.1x Port Authentication Network Control - FCC Part 15 Class A, CEPower Support1. Power over Ethernet: - PoE Standard: IEEE 802.3af & IEEE 802.3at. - PoE Power Supply Type: End-span & Mid-span. - PoE Output Power: Port 1~8: 48VDC, max. 20W/port. - Power Pins Assignment: 1/2, ,3/6,or 4/5(+),7/8(-). - PoE Ouput Power Budget: 120W in total, depending on connected power supply. - PoE Ports Assignment: Port 1~8: IEEE 802.3af (15.4W/port) or IEEE 802.3at (20W/port) PoE output. - PoE/Data Extends Range: Port 10: up-link,150-meter data transmission 150 meters/490ft. 2. Electrical: - Input Voltage: DC 48V. - AC-DC Power Adapter: Optional 120W, UL-listed,90~264VAC to 48VDC, 50/60Hz, Auto-sensing. - Power Consumption (System on): 2W. - Power Consumption (Full load): 120W. - MTBF: More than 150K hours. - Surge Protection : PPTC active surge current limiting, Transient Voltage Suppressor (TVS).Specification: General Model POE 8+2 Material Metal Input Voltage DC 48V Interface 10/100M Fast Ethernet Operation Range 150m Size 192 x 78 x 29 mm Weight 480g Environment Operating Temperature -30 - 70 Degrees Celsius Storage Temperature -40 - 85 Degrees Celsius Operating Humidity 95% RH, noncondensing Storage Humidity 95% RH, noncondensing Package Include Package Contents 1 x User Manual 1 x Power Supply 1 x Switch 1 x Power Supply (EU, US, AU, UK Optional) 1 x Mounting Screws Set Package Weight One Package Weight 1.26kgs / 2.78lb One Package Size 25.5cm * 18cm * 8.5cm / 10.04inch * 7.09inch * 3.35inch Qty per Carton 10 Carton Weight 13.50kgs / 29.76lb Carton Size 45cm * 38cm * 27cm / 17.72inch * 14.96inch * 10.63inch Loading Container 20GP: 577 cartons * 10 pcs = 5770 pcs40HQ: 1340 cartons * 10 pcs = 13400 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz, GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain 65dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Automatic Gain Control >20dB Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <2 MTBF >50000h Power Supply AC:90~265V, 50/60Hz; DC:12V 2A Power Consumption <20W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 3.78kgs / 8.34lb One Package Size 39cm * 22cm * 20cm / 15.35inch * 8.66inch * 7.87inch Qty per Carton 4 Carton Weight 15.90kgs / 35.05lb Carton Size 51cm * 45cm * 45cm / 20.08inch * 17.72inch * 17.72inch Loading Container 20GP: 258 cartons * 4 pcs = 1032 pcs40HQ: 599 cartons * 4 pcs = 2396 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED DCS signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range DCS 1800MHz, Uplink 1710-1785MHz, Downlink 1805-1880MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 182 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.78kgs / 6.13lb One Package Size 51cm * 23cm * 15cm / 20.08inch * 9.06inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 53cm * 25cm * 32cm / 20.87inch * 9.84inch * 12.6inch Loading Container 20GP: 628 cartons * 2 pcs = 1256 pcs40HQ: 1460 cartons * 2 pcs = 2920 pcs

Read more less

**Specification 1) Frequency range: -Up link GSM 890-915 -Downlink GSM 825-960 2) Gain(dB) GSM Up link: 55 3) GSM downlink: 60 4) Gain adjustable range: GSM950/ 50Db~55Db 5) Output power(dBm): ≥27 / 30 6) Pass band ripple GSM: 4dB 7) Guard band rejection: GSM(BW-60dB)≤42 MHz (BW-70dB)≤45 MHz 8) I/O impedance: 50Ω 9) I/O return loss: ≤-10dB 10) Noise coefficient: ≤5dB 11) Intermodulation attenuation (Po=13dBm): ≥40dBc 12) Transmission delay: ≤0.5us 13) Ambient temperature: -10℃～60℃ 14) Power supply: AC220V / DC 12V 45～55Hz **Characteristic 1) Fully integrated 980 MHz antenna system 2) Powerful amplifier enables up to + 85 dB of signal gain including cable loss 3) Intelligent signal processing and real time adaptive operation 4) Automatically adjusts power levels as needed to ensure a consistent coverage footprint 5) Reprogrammable (in the field) enabling spectrum or carrier reconfigurations as needed 6) Auto-track LED diagnostics displays aid install and operation 7) Patented algorithms and adaptive processing ensure our products will not interfere with other wireless frequencies or radio devices **The package contains: 1) 55dB GSM cellular phone signal amplifier 2) 9dB outdoor antenna 3) 3dB indoor antenna 4) 10m cable 5) Mounting accessories 6) AC power supplySpecification: Package Weight One Package Weight 1.25kgs / 2.75lb One Package Size 23.5cm * 15cm * 5cm / 9.25inch * 5.91inch * 1.97inch Qty per Carton 10 Carton Weight 17.40kgs / 38.36lb Carton Size 49cm * 32cm * 22cm / 19.29inch * 12.6inch * 8.66inch Loading Container 20GP: 773 cartons * 10 pcs = 7730 pcs40HQ: 1794 cartons * 10 pcs = 17940 pcs

Read more less

Features: 1. Full-motion CCTV video at distances up to 330m when used with any passive transceiver 2. Up to 1500 m with any active UTP video receiver 3. Press-Fit terminal block 4. NTSC, PAL, and SECAM video fornats 5. No power required 6. 60 dB crosstalk and noise immunity 7. Compact size and easy installation 8. Built-in transient suppression protection Specifications: 1. Frequency response: DC to 8MHz 2. Attenuation: 0.5 dB typ 3. CMRR: 60dB 4. Connectors: Male BNC and Press-Fit terminal blocks 5. Impedance: BNC: 75 ohms, Terminal:100 ohms 6. Working Temperature: -10 degree C to +70 degree C 7. Storage Temperature: -30 degree C to +70 degree C 8. Humidity: 0 to 95% 9. Dimension: 39x16x19 mm (excluding connectors)Specification: Package Weight One Package Weight 0.05kgs / 0.12lb Qty per Carton 100 Carton Weight 6.10kgs / 13.45lb Carton Size 46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch Loading Container 20GP: 644 cartons * 100 pcs = 64400 pcs40HQ: 1495 cartons * 100 pcs = 149500 pcs

Read more less

1. 100% Brand new and high quality. 2. Compatible with all HD-CVI, HD-TVI, HD-AHD. 3. Transmission Distance: HD-CVI, HD-TVI, AHD camera 720p up to 300m, over UTP cable. 4. Can transport audio signal and power supply signal at the same time. 5. Built-in transient suppression protection. 6. Super interference rejection.Specification: General Model HD 213A Material Metal, ABS Size 14.5*3.5*2.0cm Weight 70g Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 10.40kgs / 22.93lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 100 pcs = 50000 pcs40HQ: 1162 cartons * 100 pcs = 116200 pcs

Read more less

1. A perfect item for any drivers and home uses 2. Simply hang on the stanchion of the car seat with the fixing strip 3. Store and secure your umbrella within reach 4. Protects the umbrella from damage 5. Keeps the interior apartment dry,folding the bottom to prevent rain water from leaking inside the car Specification: General Material ABS, PE Product Size 19*9.5*6.5cm Product Weight 103g Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 23.5cm * 10.5cm * 10cm / 9.25inch * 4.13inch * 3.94inch Qty per Carton 40 Carton Weight 8.00kgs / 17.64lb Carton Size 55cm * 42cm * 49cm / 21.65inch * 16.54inch * 19.29inch Loading Container 20GP: 235 cartons * 40 pcs = 9400 pcs40HQ: 546 cartons * 40 pcs = 21840 pcs

Read more less

1. Material: PC2. Wall-mounted camera bracket, non-marking hole-free, does not hurt the wall, smooth and solid, easy to install3. Made of PC material, moisture-proof and waterproof, good toughness, smooth polished edges, does not hurt the hand, scratch-resistant and drop-resistant, sturdy and durable4. Transparent nail-free patch, waterproof adhesive, beautiful and practical, strong non-marking stickers, strong load-bearing, no drilling5. Hidden intimate line hole design, thick and thin lines can be used, flexible and neat alignment, goodbye to messy wires6. Bottom cooling hole design, to prevent overheating of the device, around the edge design, to prevent items from falling down7. Multi-functional use, multi-specification camera applicable, daily furnishings + storage, neat and beautiful8. Easy to install, no space constraints, can be installed in the living room/bedroom/kitchen or corner, etc.9. Weight: about 37 g10. Size: about 12 x 9.5 x 3.5 cm11. Description: shipped only the bracket and no-nail stickers, no other items includedSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 400 Carton Weight 22.00kgs / 48.50lb Carton Size 64cm * 43cm * 33cm / 25.2inch * 16.93inch * 12.99inch Loading Container 20GP: 293 cartons * 400 pcs = 117200 pcs40HQ: 681 cartons * 400 pcs = 272400 pcs

Read more less

IntroductionThank you for purchasing our car HUD Head Up Display. HUD is for drivers' safety, at high speeds, especially in high-speed driving at night, in order to avoid the driver to look down their head to watch the instrument, and decrease car accident. HUD is in extremely critical moment reflects its delicate care. HUD can project the dashboard information (such as speed) onto the windshield, it can not only to help determine the speed of inexperienced novice to control their speed and avoid many of the speed limit road due to speeding violation. More importantly, it enables the driver instantly read the number in great vision and always make drivers eyes on the road in clear mind.HUD main features1. Plug and play. HUD can automatically adapt to vehicle type which in line with OBDII or EUOBD(On-Board Diagnostic System). 2. Comprehensive display. HUD can display many parameters at the same time as follows, vehicle speed, engine speed, water temperature (voltage, throttle valve position, ignition advance angle, time of 100 km acceleration),fuel consumption, mileage, low fuel tips, engine failure. 3. Three display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode. 4. Free switch. Km and mile can be switched freely. 5. Suitable size. The display area is 5.5 inches which is very clear for driver to read data. 6. Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle's battery. Moreover, HUD can also power on and power off by manual, which is more easy to control HUD. 7. Flexible alarm mode. HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer. 8. Engine speed alarm. It contributes to shift gear in time to save fuel also has significance to new driver. 9. Flexible brightness adjustment. The brightness can be adjusted automatically or manually to reach the best state which is in harmony with the environment.Specification: General Certificate CE, RED Model X3 Bluetooth Material ABS Display Size 5.5 inch Display Type LCD Application Car Alarm Sound Level 30db and above Display Content Fuel Consumption & Over Speed Alarm & Water Temperature & Engine Failure etc. Power Current Working: 180mA Input Voltage DC 9-18V Working Voltage DC 9-16V Standby current less than 3mA Work Environment Work Temperature -35 to 80 degree celsius Dimension Size 150*85*14mm Weight 110g Package Inlude Packing Contents 1 x HUD Host 1 x OBD Cable 1 x Anti-slip Mat Package Weight One Package Weight 0.53kgs / 1.17lb One Package Size 18cm * 14cm * 5cm / 7.09inch * 5.51inch * 1.97inch Qty per Carton 30 Carton Weight 10.00kgs / 22.05lb Carton Size 54cm * 30cm * 28cm / 21.26inch * 11.81inch * 11.02inch Loading Container 20GP: 587 cartons * 30 pcs = 17610 pcs40HQ: 1364 cartons * 30 pcs = 40920 pcs

Read more less

1. All products have passed the full power aging test to provide safety and stability. 2. The aluminum casing is used to enhance heat dissipation and provide the service life of the product. 3. Input voltage: 110V/220V +/- 1% (100-140V, 180-260V) 4. Output voltage: DC24V 33A 5. Difference range: +/- 1% 6. Power: 800W 9. Output adjustable voltage range: +/- 5% 10. Frequency: 50-60Hz 11. Leakage current: less than 1mA / 230V 12. Temperature coefficient: +/- 0.03%/degree Celsius 13. Start, rise, hold time: 200ms, 50ms, 20ms 14. Vibration resistance: 10-500Hz, 2G 10min/1 cycle, duration 60 minutes, each axis 15. Protection: overload, overvoltage, overcurrent, short circuit 16. Pressure resistance Input and output: 1.5KvAC input and shell, 1.5KvAC output and shell, 0.5KvAC 17. Working temperature and humidity: -10~60 degrees Celsius, 20-90%RH 18. Storage temperature and humidity: -20~85 degrees Celsius, 10-95%RH 19. Dimensions: 245 x 125 x 65mmSpecification: General Certificate ROHS, FCC, EMC, LVD Package Weight One Package Weight 1.26kgs / 2.78lb One Package Size 28cm * 16cm * 8cm / 11.02inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 26.60kgs / 58.64lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 20 pcs = 6960 pcs40HQ: 808 cartons * 20 pcs = 16160 pcs

Read more less

1. Item Type: LED strobe warning light 2. Model: SL-97 3. Working voltage: 12 DC 4. Operating current: 50 mA / 30 mA 5. Strobe speed: less than or equal to 120 times / minute 6. Service life: more than or equal to1000 hours (standard power supply continuous operation) 7. Size: 7.2 x 4cm 8. Configuration: 15 high-bright LED lights 9. Function: Flash 2 times / sec 10. Uses: Explosion-proof, dust-proof, can be used in the field, can be used directly on all kinds of road cones, telescopic road cones, lifting road cones, warning columns, guardrails, etc. 11. High- brightness light travels further at night , two hundred meters away from the visible 12. Can work continuously for 36 hours 13. Light, high strength, able to adapt to the harsh environment 14. Suitable for warning/ambulance/police bike Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 5cm * 5cm / 3.94inch * 1.97inch * 1.97inch Qty per Carton 150 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 26cm * 26cm / 20.47inch * 10.24inch * 10.24inch Loading Container 20GP: 758 cartons * 150 pcs = 113700 pcs40HQ: 1761 cartons * 150 pcs = 264150 pcs

Read more less