Search results for "electronic modules"

1. The CAN FD to RS232/RS485 converter is a DIN rail-mounted bidirectional CAN FD and RS232/RS485 conversion device. It features high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and serial devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design, supporting a wide voltage range of 9V to 36V, with an arbitration domain baud rate of 5Kbps to 1Mbps and a data domain baud rate of 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 85.6 (mm)6. Mounting method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicator lights: POWER, WORK, COM, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in two 120-ohm termination resistors. Setting any one DIP switch to ON connects one 120-ohm resistor in parallel; setting both to ON connects two 120-ohm resistors in parallel.13. Serial port specifications: supports one RS485 or RS232 connection14. Modbus gateway: CAN FD to modbus RTU (Master/Slave)15. Transmit messages: supports 64 transmit messages16. Receive messages: supports 64 receive messages17. Conversion modes: transparent conversion, transparent with ID conversion, standard conversion, modbus conversion, and custom frame header/trailer conversion18. CAN ID: supports standard frames and extended frames19. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)20. Conversion direction: supports bidirectional conversion, serial to CAN only, and CAN to serial only21. Firmware upgrade: supports firmware upgrade via PC software22. Parameter configuration: AT commands, PC software configuration23. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV24. Electrical fast transient/burst immunity: power supply circuit 2KV; RS485/RS232 circuit 1KV; CAN circuit 1KV25. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV; CAN circuit common mode 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs40HQ: 1083 cartons * 54 pcs = 58482 pcs

Read more less

1. The ESP32-S3-RGB-Matrix is a high-performance, highly integrated LED matrix panel driver board. It is suitable for HUB75 interface RGB matrix panels and related embedded applications. Based on the ESP32-S3 microcontroller, it integrates large-capacity Flash storage, RTC chip, IMU, TF card slot, low-power audio codec chip, dual microphones, and so on. It also provides reserved interfaces such as USB, UART, I2C, and GPIO, offering strong scalability and enabling users to quickly develop and integrate it into practical applications.3. Supports 2.4 GHz Wi-Fi and Bluetooth 5 (BLE) dual-mode communication4. Includes 512KB SRAM and 384KB ROM; integrates 32MB Flash and 16MB PSRAM to meet storage requirements across various scenarios5. Compatible with the full range of Waveshare Matrix-RGB panel sizes; capable of smoothly running graphical interface programs like LVGL6. Onboard ES7210 echo cancellation chip for enhanced voice processing performance7. Onboard ES8311 low-power audio codec chip, supporting high-quality audio input and output8. Equipped with a dual-microphone array supporting noise reduction and echo cancellation algorithms; suitable for applications such as voice recognition and wake-up9. Onboard speaker interface for audio output; allows for direct connection to a speaker10. Integrates the QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for attitude detection11. Integrates the SHTC3 temperature and humidity sensor for precise environmental monitoring12. Onboard Micro SD card slot for storing images, audio, and various data files, facilitating easy data read/write operations13. Onboard PCF85063 RTC chip and reserved SH1.0 battery interface; supports timekeeping during power outages14. Reserved GPIO expansion interface for peripheral expansion and custom functionality, catering to diverse development needs15. Dual power supply interface design; supports stable operation of up to six 64×64 Matrix-RGB panels and allows for cascading expansion to meet large-format display requirements16. Onboard USB Type-C interface for power supply, programming, and debugging17. Onboard RST and BOOT buttons; the BOOT button supports custom functions, enhancing development flexibilitySpecifications:1. Power supply voltage: 5V2. Maximum current capacity: 10A3. Supported resolutions: 64 × 64 | 64 × 32 | 80 × 40 | 96 × 484. Interface type: HUB755. Maximum resolution (cascaded): 6 × 64 × 646. Operating temperature range: -40 ~ +85 degrees Celsius7. Product dimensions: 50 × 42 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 34cm * 42cm * 32cm / 13.39inch * 16.54inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs

Read more less

1. Supported movements: triangular gait, self-balancing2. Load capacity: 1kg3. Operating voltage: 12V4. No-load speed: 0.222sec / 60 degrees (45RPM)5. Stall torque: 30kg.cm6. Rated load: 10kg.cm7. Rated current: 900mA8. Control method: digital signal9. Control protocol type: half-duplex asynchronous serial communication10. Battery: 4000mAh (total capacity) 18650 lithium battery x 611. Charging method: DC 5.5x2.1 charging interface12. Battery life: 4.5h13. Charging time: 3h14. Onboard controller: ESP32-WROOM-3215. Onboard controller module features: Wi-Fi, BT, Dual Core, 240MHz16. Wireless control method: 2.4G Wi-Fi17. Wired control method: USB, UART18. Manual operation method: Web-based control interface19. Built-in high-precision 9-axis motion tracker ICM20948, capable of self-balancing20. No manual configuration of the compilation environment is required; a Wi-Fi hotspot is automatically established upon startup, allowing connection and login to the control page using a mobile phone or computer browser; no additional app download is required.21. Rich interfaces and peripherals: The device features a 0.91-inch OLED display, allowing for changes to the displayed content via a web application or host computer serial communication.22. Pre-drilled camera holes allow users to directly install cameras of the corresponding assembly size.23. Fully open source, supporting secondary development. HexArth series control code and communication interface documentation, based on our rich examples, allow for secondary development using various languages ??and devices.24. Can be installed as a Raspberry Pi 4B/Raspberry Pi 5 as a host computer for serial communication with the slave device; ESP32. As a lower-level machine, it can handle most of the computational power for inverse linkage solving and gait generation, leaving more resources for the Raspberry Pi to be used for high-level function development.25. Dimensions: 344.30 x 428.59 x 154.88 (mm)26. Weight: 2.1kg27. Servo dimensions: 45.20 x 24.70 x 37.30 (mm)28. Servo weight: 69gSpecification: Package Weight One Package Weight 2.20kgs / 4.86lb One Package Size 37cm * 45cm * 15cm / 14.57inch * 17.72inch * 5.91inch Qty per Carton 1 Carton Weight 3.30kgs / 7.28lb Carton Size 39cm * 47cm * 17cm / 15.35inch * 18.5inch * 6.69inch Loading Container 20GP: 855 cartons * 1 pcs = 855 pcs40HQ: 1986 cartons * 1 pcs = 1986 pcs

Read more less

1. Soft start function2. Conversion efficiency reaches 97%3. 220Khz switching frequency4. Built-in synchronous switch step-down converter chip5. Output voltage range: 3V to 12V, automatically adjusted according to the fast charge protocol6. Used in car chargers, fast charging adapters, smart power strips, solar chargers, etc.7. This module is a 4-way pressure drop fast charging module, please use 12V-30V DC power supply, and the positive and negative poles cannot be reversed.8. Input voltage range: 4.5V to 32V (the input voltage must be higher than the output voltage, because it is a voltage drop module)9. Multiple protections, high reliability, output over current, input over voltage, input under voltage, output short circuit protection, over temperature protection of the whole machine10. The output has CV/CC characteristics (output current is less than the set value, output CV mode; output current is greater than the set value, output CC mode)11. PCB adopts FR-4 1.6mm thickness design, optimized layout and wiring, tight design, open window on the back for heat dissipation, low full load working temperature, standby current 0.013A, module has output voltage compensation function12. Each of the four channels supports QC 3.0 fast charging protocol, and can support fast charging at the same time, and can output 5V/9V/12V (requires mobile phone protocol support) voltage, output current is adaptive, single channel power consumption 24W, 4 channels module Power consumption 96WSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 42cm / 20.47inch * 12.6inch * 16.54inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

Specifications1. CM4 Socket: Available on all variants of Compute Module 4 2. Network: Gigabit Ethernet RJ45 connector, 100M Ethernet RJ45 connector 3. USB: USB 2.0 Type A x 2 4. Connector: Isolated RS485 x 4, power screw terminal x 1 5. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) 6. Video: HD-MI interface x 1, support 4K 30fps output 7. RTC: Real Time Clock with Battery Socket and Ability to Wake Compute Module 4 8. Storage: MicroSD card slot for Compute Module 4 Lite (no eMMC) variant 9. Fan head: allow speed adjustment, 5V 10. Indicator: Power indicator x 1, CM4 status indicator x 1, User LED x 2, RS485 communication indicator x 8 11. Power input: 7-36V 12. Dimensions: 123 x 98 x 32mmPackage List1. CM4-ETH-RS485-BASE-B x 1 2. Metal case (top and bottom) x 1 3. Fan x 1 4. 12V 2A Power Supply x 1 5. Screwdriver x 1 6. Antenna connector rubber plug x 1 7. Screws pack x 1Specification: Package Weight One Package Weight 0.48kgs / 1.05lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 19.50kgs / 42.99lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs

Read more less

1. The input terminal has a MICRO USB female socket, you can directly use the mobile phone charger as an input to charge the lithium battery, and there are still input voltage wiring solder joints, which can be very convenient for DIY2. Power supply voltage: 5v3. Power supply current: 1A4. Purpose: Electric toys5. Charging cut-off voltage: 4.2v6. Large charging current: 1000mA7. Battery over-discharge protection voltage: 2.5v8. Battery overcurrent protection current: 3A9. Board size: 2.6x1.7cm10. Note: The load on the OUT terminal should be disconnected when charging, and the positive and negative poles should not be connected wrongly. Please use it according to the specifications, otherwise it will be directly damaged.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 6cm * 6cm / 4.72inch * 2.36inch * 2.36inch Qty per Carton 100 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 100 pcs = 52000 pcs40HQ: 1209 cartons * 100 pcs = 120900 pcs

Read more less

Specification1. USB: - USB 2.0 x 2 - USB 2.0 x 2 (via FFC connector) 2. GPIO: Raspberry Pi 40 PIN GPIO x 1 3. Header: M.2 slot x 1 4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output 5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) 6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) 7. Power input: 5V 8. FAN: 5V / 12V (no fan control) 9. RJ45 Ethernet: Gigabit Ethernet 10. CM4 slot: Suitable for all variants of Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 12. Size: 85.0 x 56.0mmPackage List1. CM4-IO-BASE-B x 1 2. Metal case (top and bottom) x 1 3. Fan-4010-PWM-5V x 1 4. Screwdriver x 1 5. Screws pack x 1 6. 5V 3A USB-C power adapter x 1Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 16.50kgs / 36.38lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs

Read more less

1. Onboard voltage regulation chip, supporting a wide voltage range from 7V to 36V, and supporting PoE Ethernet power supply2. Supports control via MQTT protocol, providing Alibaba Cloud MQTT application routines3. Onboard integrated power isolation, capable of providing stable isolated voltage, and the isolated end does not require additional power supply4. Input features bidirectional optocoupler isolation, supporting passive and active switch input, built-in anti-jitter algorithm, relays support switch input linkage mode or inversion mode control5. Output uses Darlington, with optocoupler isolation, stronger driving capability, with a driving current of up to 500mA, and built-in reverse current diode protection6. Output has flash-on and flash-off functions, can be set with parameters in the instruction, automatically turns off after a certain period of time after the output is turned on7. Rail-mounted enclosure design, convenient installation, safer to use8. External indicator light, convenient for checking input/output status, MCU status and signal transmission/reception status9. Size: about 14.5 x 9 x 4 cmPackaging list:- Modbus POE ETH IO 8CH host unit x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 18cm * 12cm * 6cm / 7.09inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 40 pcs = 17520 pcs40HQ: 1018 cartons * 40 pcs = 40720 pcs

Read more less

1. Employs the Raspberry Pis officially designed RP2350 microcontroller chip.2. Unique dual-core, dual-architecture design, featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at flexible clock speeds up to 150MHz.3. Uses Infineons CYW43439 wireless chip, supporting Wi-Fi 4 and Bluetooth 5.2.4. Built-in 520KB SRAM and 4MB on-chip Flash.5. Stamp hole design for direct soldering to user-designed baseboards.6. Pico 2 WH uses official solder headers; no stamp hole design, connection to the baseboard is only possible via headers.7. USB 1.1 host and device support.8. Supports low-power sleep and hibernation modes.9. Can be recognized as a mass storage device via USB for drag-and-drop program downloads.10. Up to 26 versatile GPIO pins.11. 2 One SPI, two I2C, two UARTs, three 12-bit ADCs, and 16 controllable PWM channels.12. Twelve programmable I/O (PIO) state machines for custom peripheral support.Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 5cm * 8cm * 3cm / 1.97inch * 3.15inch * 1.18inch Qty per Carton 462 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 37cm * 35cm / 19.69inch * 14.57inch * 13.78inch Loading Container 20GP: 411 cartons * 462 pcs = 189882 pcs40HQ: 956 cartons * 462 pcs = 441672 pcs

Read more less

1. Using pogo pin connection, the Zero 2W can be easily attached 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. Onboard headphone jack(extended from USB) and an additional speaker header 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive 6. Not compatible with the first generation Zero Package List: 1. Zero-to-Pi3-Adapter (B) x 1 2. HD-MI Adapter x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 100 Carton Weight 6.50kgs / 14.33lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

1. The CAN FD TO ETH is a DIN rail-mounted CAN FD to Ethernet device, featuring high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and Ethernet devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design for stable operation and supports a wide voltage range of 9V to 36V. The arbitration domain baud rate is 5Kbps to 1Mbps, and the data domain baud rate is 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 76.1 (mm)6. Installation method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicators: POWER, WORK, NET, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps;11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in 2 CAN bus 120-ohm termination resistors. The resistors are connected via DIP switches. Setting any one DIP switch to ON connects one 120-ohm resistor; setting both DIP switches to ON connects two 120-ohm resistors in parallel.13. Network port specifications: RJ45, 10/100Mbps, auto-negotiation for crossover/straight-through cables14. Network protocols: TCP server, TCP client, UDP server, and UDP client15. Modbus gateway: CAN FD to ModbusTCP (Master/Slave)16. Transmit messages: supports configuring up to 64 transmit messages17. Receive messages: supports configuring up to... 64 received messages18. Conversion modes: transparent conversion, Transparent conversion with ID, Standard conversion, Modbus conversion, and Custom frame header and footer conversion19. CAN ID: supports standard frames and extended frames20. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)21. Packet frame number and time: supports custom packet frame number and custom packet time22. Conversion direction: supports bidirectional conversion, Ethernet to CAN only, and CAN to Ethernet only23. Firmware upgrade: supports firmware upgrade via PC software24. Parameter configuration: AT commands, PC software configuration25. Other functions: supports heartbeat packets, registration packets, normal, loopback, and listen-only operating modes26. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV27. Electrical fast transient/burst: power supply circuit 2KV, Ethernet and CAN port circuits 1KV28. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV, CAN circuit common mode 2KV, Ethernet circuit 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs40HQ: 1083 cartons * 54 pcs = 58482 pcs

Read more less

OverviewThis is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, etc. Whats more, the USB TO RS232/485/TTL comes with an aluminium alloy enclosure, make it solid and durable to work.The USB TO RS232/485/TTL is very easy to use, fully automatic transceiving without delay. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement.Features1. USB TO RS232, USB TO RS485, USB TO TTL (UART)2. Adopt original FT232RL, fast communicating, stable and reliable, better compatibility3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal4. Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering each other8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch9. Aluminium alloy enclosure with sand blasting and anodic oxidation, CNC process opening, solid and durable10. 3 LEDs for indicating the power and transceiver status11. High quality USB-B and RS232 connectors, smoothly plug/pullSpecifications1. Product type: industrial optically isolated converter2. Baudrate: 300-921600bps3. Host port: USB4. Device port: RS485/RS232/TTL5. USB:- Operating voltage: 5V- Connector: USB-B- Protection: 200mA self-recovery fuse, isolated output- Transmission distance: ~5m6. RS485:- Connector: screw terminal- Pins: A+, B-, GND- Direction control: hardware automatic control- Protection: 600W lightning-proof and surge-suppress, 15KV ESD protection (reserved 120R balancing resistor solder pads)- Transmission distance: ~1200m- Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)7. RS232:- Connector: DR9 male- Protection: TVS diode, surge protection, ESD protection- Transmission distance: ~15m- Transmission mode: point-to-point8. TTL (UART):- Operating voltage: 3.3V/5V- Connector: screw terminal- Pins: TXD, RXD, GND- Protection: clamp protection diode, over-voltage/negative-voltage proof, shock resistance- Transmission mode: point-to-point9. LED indicators:- PWR: red power indicator, light up when there is USB connection and voltage is detected- TXD: green TX indicator, light up when the USB port sends data- RXD: blue RX indicator, light up when the device ports send data back10. Operating environment:- Temperature: -15℃ ~ 70℃- Humidity: 5%RH ~ 95%RH11. Operating system: Windows 10 / 8.1 / 8 / 7 / XP12. Package contents:- USB TO RS232/485/TTL x1- USB cable x1Specification: Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 192 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 192 pcs = 59136 pcs40HQ: 716 cartons * 192 pcs = 137472 pcs

Read more less