Search results for "electronic modules"

1. Ultra-wide input and output voltage, ultra-high conversion efficiency2. Small size and adjustable boost module, which can be easily installed in various small devices3. MicroUSB input can be used, and the common voltages of 9V, 12V, 15V, 18V, 24V can be easily obtained through the mobile phone data line with a USB charger or mobile power supply, which is very convenient to use4. Packing: individually packed in anti-static bag5. Type: voltage regulator IC6. Output current: 2A (recommended to use within 1A)7. Input voltage: 2 v--24 v8. Output voltage: 28 v (recommended to use within 26V)9. Size: 30x17x14mmPrecautions:1. This module is a boost module, the output voltage should be greater than the input voltage2. The peak current output current does not exceed 2ASpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 6cm * 4cm * 6cm / 2.36inch * 1.57inch * 2.36inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 32cm * 25cm / 16.54inch * 12.6inch * 9.84inch Loading Container 20GP: 793 cartons * 200 pcs = 158600 pcs40HQ: 1842 cartons * 200 pcs = 368400 pcs

Read more less

1. Get 51 Arduino STM32 microcontroller routine.2. With a USB interface, you can watch the computer positioning effect directly phone line.3. With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.4. With SMA interface can be directly connected to an active antenna SMA.5. TTL level, compatible with 3.3V/5V systems.(Size: 39 x 25.5mm)6. Frequency: 1575.42MHz7. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely usedSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 6cm * 3cm / 2.36inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch Loading Container 20GP: 1721 cartons * 200 pcs = 344200 pcs40HQ: 3996 cartons * 200 pcs = 799200 pcs

Read more less

BME280 Environmental Sensor, Temperature, Humidity, Barometric PressureOverview1. A tiny sensor breakout with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.2. Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental Sensor is suited for applications such as environment monitoring, weather forecast, altimeter, and IoT projects, and so on.Features1. Supports I2C (default), configurable slave address2. Supports SPI, switch to SPI via I/O setting3. Onboard voltage level translator, compatible with 3.3V/5V operating voltage4. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Operating voltage: 3.3V/5V2. Communication interface: I2C/SPI3. Temperature sensing: -40~85°C (resolution 0.01degree C, accuracy +/-1 degree C)4. Humidity sensing: 0~100%RH (resolution 0.008%RH, accuracy +/-3%RH, response time 1s, delay =<2%RH)5. Barometric pressure sensing: 300~1100 hPa (resolution 0.18Pa, accuracy +/-1hPa)6. Power consumption: <0.1mA@1Hz (H,P,T)7. Dimension: 27mm x 20mm8. Mounting hole size: 2.0mmPackage Contents1. BME280 Environmental Sensor x12. PH2.0 6PIN wire 20cm x1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 118.56kgs / 261.38lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less

Overview1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 868MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 868MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Read more less

1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Onboard CAN controller MCP2515 via SPI interface, matching with SIT65HVD230DR transceiver 3. Features RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485 4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, light-ningproof & anti-electrostatic 5. Onboard digital isolation chip, safer signal isolation communication and better stability and anti-interference 6. Reserved control pins, allows to work with other control boards 7. Comes with development resources and manual (examples in python)Specifications1. CAN Controller: MCP2515 2. CAN transceiver: SIT65HVD230DR 3. RS485 transceiver: SP3485 4. Working voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Dimensions: 100 x 79 mmPackage List1. RS485 CAN for Jetson Nano x1 2. Screws pack x1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 7cm * 2cm / 4.72inch * 2.76inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs40HQ: 1162 cartons * 200 pcs = 232400 pcs

Read more less

FeaturesThis is a RS485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD Client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame-retardant case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...SpecificationsOutline: 1. Communication interface: RS485, screw terminal 2. Power supply: 5 ~ 36V DC, screw terminal 3. Case: PC + ABS, V0 flame retardant grade 4. Dimensions: L x W x H: 109.66 x 28 x 64.71 mm Comunication: 1. Ethernet: 10 / 100M auto-negotiation RJ45 connector 2. WIFI: 802.11b/g/n compliant 3. Serial port: RS485 interface (Anti-surge, Lightningproof, Over-current protection) Wireless specification: 1. Frequency Band: 2.412 ~ 2.484 GHz 2. Wireless network: Station / AP / AP+Station Mode 3. Security mechanism: WPA-PSK / WPA2-PSK 4. Encryption type: TKIP / AES 5. Transmitting power: - 802.11b: +19dBm (11Mbps) - 802.11g: +18dBm (54Mbps) - 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7) 6. Receiving sensitivity: - 802.11b: -89dBm (11Mbps) - 802.11g: -81dBm (54Mbps) - 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7) Serial specification: 1. Baudrate: 300 ~ 460800 bps 2. Parity bit: None, odd, even, mark, space 3. Data bit: 5 ~ 9 bits 4. Flow control: N/A Software 1.Protocol: TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP / MQTT 2. Configuration: Host, web browser, serial AT command 3. Communication method: TCP/IP direct communication, VCOM 4. Operating mode: Transparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU Environmental requirements 1. Working temperature: -40 ~ 85 degree C 2. Storage temperature: -45 ~ 125 degree C 3. Humidity range: 5% ~ 95% relative humidityPackage List1. RS485 TO WIFI/ETH x 1 2. Antenna x 1Specification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 42cm * 50cm * 32cm / 16.54inch * 19.69inch * 12.6inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 921 cartons * 100 pcs = 92100 pcs

Read more less

1. Suitable for Raspberry Pi Pico and other devices to achieve reliable remote communication2. Standard Raspberry Pi Pico header supports Raspberry Pi Pico series boards.3. Features CAN function, adopts SPL interface CAN controller MCP2515 with transceiver SIT65HVD230DR4. Comes with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPvthon examples)l5. Operating voltage: 3.3V-5V6. CAN controller: RMCP25157. CAN transceiver: SIT65HVD230DR8. Communication bus: SPI9. Baudrate: 5K-1000Kbps10. Size: 52 x 21mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs

Read more less

Capacitive Fingerprint Reader, onboard processor STM32F105, commercial fingerprinting algorithm, semiconductor sensorOverview1. The Capacitive Fingerprint Reader is a standard fingerprinting module designed for secondary development, allows fast and stable fingerprint verification.2. Based on a high-speed digital processor STM32F105R8, combined with high-security commercial fingerprinting algorithm, and advanced semiconductor sensor, the Capacitive Fingerprint Reader becomes a simple but smart integration module, provides functionalities like fingerprint enrolling, image processing, feature finding, template generating and storing, fingerprint matching and searching, etc.Features1. Easy to use by some simple commands, you dont have to know any fingerprint technology, or the module inter structure/calculation2. Commercial fingerprinting algorithm, stable performance, fast verification3. Sensitive detection, just touch the collecting window lightly, without pressing4. Allows to freely input/output fingerprint images, fingerprint feature file and other fingerprinting actions5. Dual communication, UART or USB6. Processor will enter sleep and wake up when detecting, achieves low power consumption7. Comes with rich related resources (software on PC, development SDK, tools, and examples for Raspberry/Arduino/STM32)Package Contents1. Capacitive Fingerprint Reader x12. PH2.0 wire 20cm 6Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Read more less

Overview1. The PCF8563 RTC Board provides the real-time clock/calendar function, which can be driven by a battery on board and works independently even when the MCU is turned off.2. The PCF8563 RTC Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, its more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector.FeaturesPCF8563, I2C pinheader, I2C connector, 3.3V battery includedSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 13cm * 4cm * 3cm / 5.12inch * 1.57inch * 1.18inch Qty per Carton 520 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 520 pcs = 170560 pcs40HQ: 763 cartons * 520 pcs = 396760 pcs

Read more less

Features1.Pixels: 5 megapixel2.Resolution: 2592x19443.Sensor: OV5640 3.1 1.4um x 1.4um pixel with OmniBSI technology, high sensitivity, low crosstalk, low noise 3.2 Automatic image control functions: AEC, AWB, ABF, ABLC, etc. 3.3 Image quality controls: color saturation, hue, gamma, sharpness, lens correction, etc. 3.4 Supports image scaling, panning, windowing, etc.4.Lens: 4.1 CCD size: 1/4inch 4.2 Aperture (F): 2.8 4.3 Focal Length: 2.8mm 4.4 Diagonal: 63 degree5.Output Formats: 5.1 YUV(422/420)/YCbCr422 5.2 RGB565/555/444 5.3 CCIR656 5.4 RAW RGB 5.5 Compressed Data6.Operating Voltage: 3.3V7.Control Interface: SCCB (I2C compatible)8.Data Interface: DVP 8-bit9.Dimension: 35.70mm × 23.90mmSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 4cm * 1cm / 2.36inch * 1.57inch * 0.39inch Qty per Carton 4000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4000 pcs = 1108000 pcs40HQ: 644 cartons * 4000 pcs = 2576000 pcs

Read more less

Product demonstration (Note: OLED is not soldered to T-beam) Features: 1. ESP 32 version: Rev1 2. WiFi 3. Bluetooth 4. 4MB pSRAM 5. 4MB flash memory 6. Three-dimensional antenna product description: 1. Working voltage: 1.8~3.7V 2. Acceptable current: 10~14 mA 3. Transmitting current: 120 mA@+20 dBm 4. 90 mA@+17 dBm 5. 29 mA@+13 dBm 6. Working frequency: 433/470 MHz (433 HMz version) SX1278 /868m/915 m (868 MHz version) SX1276 7. Transmitting power: +20 dBm 8. Receiving sensitivity: -139 dBm@Lora&62.5Khz&SF=12&146 bps -136 dBm@Lora&125 Khz&SF=12&293 bps -118 dBm@Lora&125 Khz&SF=6&9380 bps -123 dBm@FSK&5 Khz&1.2Kbps 9. Frequency error: +/-15 kHz 10. FIFO space: 64 bytes 11. Data rate: 1.2k~300 Kbps@FSK 0.018K~37.5Kbps@Lora 12. Modulation method: FSK, GFSK, MSK, GMSK, Lora TM, OOK 13. Interface form: SPI 14. Sleep current: 0.2uA 15. 1.5uA@Idle 16. Working temperature: -40 degrees Celsius-+85 degrees Celsius 17. Digital RSSI function 18. Automatic frequency correction 19. Automatic gain control 20. Low pressure detection 21. Fast wake-up and frequency hopping 22. Highly configurable packet handler Global Positioning System: 1. GPS module neo-6m, 3V-5V power supply universal 2. The predetermined module with ceramic antenna, super signal 3. Save configuration parameter data EEPROM 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 power: 1. TP 5400 2. 1A battery management 3. LED indicator: there are 4 LEDs to display the battery status in real time 4. USB 5. CP 2104-GMR 6. Pre-Flash firmware OLED description: 1. Size: 0.96 inches 2. High resolution: 128x64 3. Color: white 4. Viewing angle: >160 degrees 5.Driver IC: SSD 1306 6. Working temperature: -30~80 degrees Celsius 7. Module size (generous): 27.0mm x 27.0mm x 4.1mm 8. Support a variety of control chips: fully compatible with Arduino, 51 series, MSP 430 series, STM 32/2, CSR chips, etc. (a lot of examples are available for reference) 9. Wide voltage support: directly support 3.3V~5V DC power supply without any modification 10. Ultra-low power consumption: 0.04W in normal operation 11. IO port occupies the smallest display: IIC communication, as long as two IO ports Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs

Read more less

Safety Cautions1. Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they are not properly recharged or used. 2. Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery. 3. Do not mix use old batteries with new ones, avoid using batteries of different brands. 4. When buying lithium battery, should make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test. 5. Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first. 6. Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.FeaturesThe Solar Power Manager (C) is compatible with general 6V~24V solar panels. It can recharge the 18650 rechargeable Li-ion batteries through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP). The module features MPPT (MAX Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. 1. Support MPPT (MAX Power Point Tracking) function, MAX the efficiency of the solar panel 2. Flexible battery recharging: from solar panel or USB TYPE-C power adapter 3. Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input 4. Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency 5. Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance 6. Embedded battery holder, supports 3x 18650 rechargeable Li-ion batteries 7. Several LED indicators, for monitoring the status of solar panel and battery 8. Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to useSpecifications1. Solar in: 6V ~ 24V (18V by default) 2. Recharging: Solar panel, power adapter, USB 3. Battery: 3 x 18650 Li-ion battery (Not included) 4. USB input: 5V (Type-C, with PD quick charge support) 5. 5V output: 5V / 3A (USB-out, Type-C) 6. Recharging cutoff voltage: 4.2V +/- 1% 7. Over discharge protection voltage: 3.0V +/- 1% 8. Solar panel recharging effeciency: ~78% 9. USB recharging effeciency: ~93% 10. Batteries boost out effeciency: ~92% 11. Case: Metal case 12. Size: 119.0 x 71.0 x 25.2mm 13. Package list: - Solar Power Manager (C) x1 - Adapter x1Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 40 pcs = 29360 pcs40HQ: 1705 cartons * 40 pcs = 68200 pcs

Read more less