Produkter
-
Waveshare Waveshare CAN FD Protocol Converter CAN FD To ETH/RS232/RS485 Bidirectional Data Communication, CAN FD To ETH/RS232/RS485
1. The CAN FD ETH RS232/RS485 Converter is a DIN-rail mountable device designed for bidirectional conversion between CAN FD and Ethernet/RS485/RS232 interfaces. It features high speed, low latency, stable performance, ease of use, and excellent cost-effectiveness. Supporting five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—it enables interconnection between CAN networks and Ethernet or serial devices and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide power input range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.3. The device supports configuration via host-side software and features a built-in 120Ω bus resistor (selectable via DIP switch) and DIN-rail mounting capability, ensuring convenient and efficient setup and installation. Basic Specifications:1. Operating Voltage: DC 9V–36V2. Dimensions: 110 × 27 × 85.6 mm3. Mounting: DIN-rail mounting4. Reload Button: Long press to restore factory settings5. Indicators: POWER, WORK, COM, and CANInterface Specifications:1. CAN Port: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B2. CAN Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps3. Termination Resistor: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel4. Ethernet Port: RJ45, 10/100 Mbps, auto-MDI/MDIX5. Serial Port: Supports one RS485 or RS232 connectionSoftware Functions:1. Modbus Gateway: Ethernet: CAN (FD) to Modbus TCP (Master/Slave); Serial: CAN (FD) to Modbus RTU (Master/Slave)2. Transmit Messages: Supports configuration of up to 64 transmit messages3. Receive Messages: Supports configuration of up to 64 receive messages4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion5. CAN ID: Supports standard frames and extended frames6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)7. Packetization (Frame Count/Time): Supports custom frame count and custom time interval for packetization (Ethernet port)8. Conversion Direction: Supports bidirectional conversion, Serial/Ethernet to CAN only, or CAN to Serial/Ethernet only9. Firmware Upgrade: Supports firmware upgrades via host software10. Parameter Configuration: AT commands Configuration via commands and host-side software11. Other functions: Supports heartbeat packets and registration packets; operating modes include normal, loopback, and listen-only (for the Ethernet port)Protection parameters:1. Electrostatic discharge (ESD) protection: Air discharge 8 kV, contact discharge 6 kV2. Electrical fast transient (EFT) immunity: Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV; Ethernet port circuit 1 kV3. Surge immunity test: Power circuit (differential mode 1 kV, common mode 2 kV); CAN circuit (common mode 2 kV); serial port circuit (common mode 2 kV); Ethernet port circuit (common mode 2 kV)Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs40HQ: 1316 cartons * 54 pcs = 71064 pcs
836,00 kr
-
Waveshare Waveshare CAN FD Protocol Converter CAN FD To RS232/RS485 Bidirectional Data Communication, CAN FD To RS232/RS485
1. The CAN FD to RS232/RS485 converter is a DIN-rail mountable device designed for bidirectional data conversion between CAN FD and RS232/RS485 interfaces. It features high speed, low latency, stable performance, ease of use, and cost-effectiveness. It supports five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—enabling interconnection between CAN and serial devices, while remaining compatible with CAN FD and CAN 2.0A/2.0B protocols.2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide input voltage range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.3. The device supports configuration via host software and features a built-in 120Ω bus resistor (selectable via DIP switch). Designed for DIN-rail mounting, it offers convenient configuration and efficient installation. Basic Parameters:1. Operating Voltage: DC 9V–36V2. Dimensions: 110 × 27 × 85.6 mm3. Mounting Method: DIN-rail mounting4. Reload Button: Long press to restore factory settings5. Indicators: POWER, WORK, COM, and CANInterface Parameters:1. CAN Port Specifications: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B2. CAN Port Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps3. Termination Resistors: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel4. Serial Port Specifications: Supports one RS485 or RS232 connectionSoftware Functions:1. Modbus Gateway: CAN FD to Modbus RTU (Master/Slave)2. Transmit Messages: Supports configuration of up to 64 transmit messages3. Receive Messages: Supports configuration of up to 64 receive messages4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion5. CAN ID: Supports standard frames and extended frames6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)7. Conversion Direction: Supports bidirectional conversion, serial-to-CAN only, and CAN-to-serial only8. Firmware Upgrade: Supports firmware upgrades via host PC software9. Parameter Configuration: AT commands or host PC software configurationProtection Parameters:1. ESD Protection: Air discharge 8 kV, contact discharge 6 kV2. Electrical Fast Transient (EFT): Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV3. Surge immunity test: Power supply circuit—differential mode 1 kV, common mode 2 kV; CAN circuit—common mode 2 kV.Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs40HQ: 1316 cartons * 54 pcs = 71064 pcs
526,00 kr
-
WAVESHARE WAVESHARE CM5 Dual Network Port Expansion Board Onboard USB 3.2 Gen1 X 2, Supports PoE Module Connection, 32580
1. Networking: 1000M Ethernet RJ45 interface; 2500M Ethernet RJ45 interface2. Connector: Raspberry Pi 40PIN GPIO interface3. USB: USB 3.2 Gen1 x 24. MIPI: 4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector)5. Video: HDMI interface x 2, supports dual 4K output6. M.2: M.2 M KEY (PCIe Gen2/3 x1)7. M.2 (4G/5G): B KEY, supports 4G/5G communication module8. Storage: Onboard Micro SD card slot (for CM5 versions without eMMC)9. Fan Interface: 5V, 4PIN JST-SH PWM fan connector10. Power Input: 7V ~36V wide voltage (round terminal), 5V 5A (Type-C)11. Supports 4-screen display, with added MIPI DSI driver; the system will default to connecting to the screens regardless of whether they are connected, and the screens will display in split-screen mode (this depends on the system version).12. Dimensions: 99.60 x 87.00 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 12cm * 4cm / 4.72inch * 4.72inch * 1.57inch Qty per Carton 96 Carton Weight 6.90kgs / 15.21lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 96 pcs = 39552 pcs40HQ: 958 cartons * 96 pcs = 91968 pcs
795,00 kr
-
WAVESHARE WAVESHARE ESP32 Microcontroller WiFi Development Board 32-Bit LX6 Dual-Core Processor, WROOM-32E-N4, WROOM-32UE-N16, WROVER-E-N16R8, WROVER-IE-N16R8
1. Utilizing the ESP32 module, equipped with the Xtensa 32-bit LX6 dual-core processor, with a main frequency of up to 240 MHz2. Integrating 520KB SRAM and 448KB ROM, with the option of PSRAM and Flash memory versions3. Supporting 2.4GHz Wi-Fi, classic Bluetooth, and low-power Bluetooth wireless communication4. Using the USB Type-C interface, supporting both forward and reverse insertion, facilitating power supply, program download, and serial port debugging5. Onboard the CH343P USB to UART chip, providing stable and reliable serial communication6. Supports both USB Type-C and lithium battery power supply methods, and can automatically switch the power source7. Exposing a rich set of peripheral interfaces, with pin compatibility for the ESP32-DevKitC development board, offering strong compatibility and expandability8. Stamps hole design, allowing for direct soldering integration onto the user self-designed baseboardSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 9cm * 6cm * 3cm / 3.54inch * 2.36inch * 1.18inch Qty per Carton 330 Carton Weight 8.00kgs / 17.64lb Carton Size 47cm * 38cm * 35cm / 18.5inch * 14.96inch * 13.78inch Loading Container 20GP: 426 cartons * 330 pcs = 140580 pcs40HQ: 990 cartons * 330 pcs = 326700 pcs
108,00 kr - 135,00 kr
-
Waveshare Waveshare ESP32-C5 Dual-Band Wi-Fi 6 Development Board 240MHz Single-Core Processor, Without Pinheader, With Pinheader
1. Uses ESP32-C5-MINI-1 series module as the main controller, powered by a RISC-V 32-bit single-core processor with main frequency up to 240 MHz.2. Integrates 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, and 4 MB Flash memory.3. Supports 2.4 GHz and 5 GHz dual-band Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with excellent RF performance.4. Utilizes a USB Type-C interface, eliminating worry about plug orientation, and supporting convenient power supply, development, and debugging.5. Onboard MP1605GTF-Z high-efficiency DC-DC power supply chip, delivering load current up to 2A.6. Onboard ETA6098 power management circuit, supporting lithium battery power supply, charging status indication, and battery voltage sampling.7. Routes out multiple GPIOs and expands 6 additional IOs via TCA9554 for easy peripheral connection. Features rich peripheral interfaces including USB, UART, I2C, SPI, ADC, and PWM for flexible functional implementations.8. Stamp-hole (castellated hole) design allows direct soldering and integration onto user-designed baseboards.9. Supports multiple low-power operating modes to balance communication distance, data rate, and power consumption, meeting energy requirements for various application scenarios.10. Compatible with most of the Raspberry Pi Pico expansion board ecosystem, ideal for AIoT (Artificial Intelligence of Things) application development.Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 120 pcs = 64320 pcs40HQ: 1244 cartons * 120 pcs = 149280 pcs
122,00 kr - 135,00 kr
-
Waveshare Waveshare ESP32-C5 Dual-Band Wi-Fi 6 Development Board External FPC Antenna, Without Pinheader, With Pinheader
1. Uses ESP32-C5-MINI-1 series module as the main controller, powered by a RISC-V 32-bit single-core processor with main frequency up to 240 MHz.2. Integrates 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, and 4 MB Flash memory.3. Supports 2.4 GHz and 5 GHz dual-band Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with excellent RF performance.4. Utilizes a USB Type-C interface, eliminating worry about plug orientation, and supporting convenient power supply, development, and debugging.5. Onboard MP1605GTF-Z high-efficiency DC-DC power supply chip, delivering load current up to 2A.6. Onboard ETA6098 power management circuit, supporting lithium battery power supply, charging status indication, and battery voltage sampling.7. Routes out multiple GPIOs and expands 6 additional IOs via TCA9554 for easy peripheral connection. Features rich peripheral interfaces including USB, UART, I2C, SPI, ADC, and PWM for flexible functional implementations.8. Stamp-hole (castellated hole) design allows direct soldering and integration onto user-designed baseboards.9. Supports multiple low-power operating modes to balance communication distance, data rate, and power consumption, meeting energy requirements for various application scenarios.10. Compatible with most of the Raspberry Pi Pico expansion board ecosystem, ideal for AIoT (Artificial Intelligence of Things) application development.FPC Dual-Band Wi-Fi Antenna Parameters:1. Frequency Range: 2400-2500 MHz / 5200-5800 MHz2. Max Power: 5W3. Antenna Dimensions: 48.0 x 10.0 x 0.2 mm4. Cable Length: 80 mm5. VSWR: Less than 36. Connector Specification: IPEX Generation 47. Peak Gain: 6.49 dBi (2.4G band) / 8.24 dBi (5.8G band)8. Antenna Material: FPC9. Output Impedance: 50 ohms10. Operating Temperature: -30 to +80 degrees Celsius11. Polarization Type: Vertical12. Radiation Direction: OmnidirectionalSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 120 pcs = 64320 pcs40HQ: 1244 cartons * 120 pcs = 149280 pcs
122,00 kr - 135,00 kr
-
WAVESHARE WAVESHARE For Arduino VENTUNO Q Edge AI Computer Qualcomm And STM32 Dual Architecture, 40 Dense TOPS, Extensive Industrial / Robotics Expansion Options, 35981
1. Microprocessor (MPU): Qualcomm Dragonwing IQ8 (QCS8275); octa-core Arm Cortex CPU; Adreno 623 GPU; Adreno VPU 623; Hexagon NPU; Qualcomm Spectra 692 ISP 2. AI Acceleration: Hexagon Tensor AI Processor, up to 40 dense TOPS 3. Microcontroller (MCU): STM32H5F5, Arm Cortex-M33, up to 250 MHz; 4 MB Flash; 1.5 MB RAM 4. System: MPU pre-installed with Ubuntu Linux, with support for Debian; MCU based on Arduino Core running Zephyr OS 5. Memory / Storage: 16GB LPDDR5 (2 x 8GB) / 64GB eMMC 6. Expandable Storage: M.2 Key M 2230, PCIe Gen 4 x 4, NVMe-compatible; for expandable storage only; does not support booting from NVMe 7. Wireless Connectivity: Tri-band Wi-Fi 6 (2.4/5/6 GHz) with 2 onboard antennas; Bluetooth 5.3 with an onboard antenna 8. Wired Networking: 1 x 2.5 Gbit RJ45 Ethernet 9. USB: 1 x USB-C, supports host/device role switching, power delivery role switching, and video output; 2 x USB 3.0 Type-A; JOMEGA provides 2 USB 3.0 ports 10. Cameras: 3 x MIPI CSI interfaces; JMEDIA provides 2 multiplexed MIPI CSI channels; supports USB cameras 11. Video Output: 1 x HDMI; USB-C DisplayPort Alt Mode; JMEDIA MIPI DSI (shared with HDMI) 12. Audio: MAX98091 audio decoder; JMISC provides microphone input, stereo headphone output, mono speaker output, and line-out; JOMEGA provides microphone input 13. CAN-FD: 1 channel via terminal blocks with PHY; 3 channels via JOMEGA without PHY; 1 channel via UNO Shield header without PHY 14. On-board Interaction: 8 x 13 monochrome blue LED dot matrix; 4 user-programmable RGB LEDs; power indicator; USB-C PD fault indicator; user button; reset button 15. Power: USB-C PD: 9–20 V, up to 3 A; DC power connector: 7–24 V, up to 5 A; screw terminal blocks: 7–24 V, up to 10 A 16. Operating Temperature: -10 to +60 degrees Celsius 17. PCBA Dimensions: Approximately 16 x 10 x 2.58 cm (height excludes heat sink and fan)Dual-Architecture Design:1. Processor: AI computing core uses Qualcomm Dragonwing IQ8 (QCS8275); real-time control core uses STM32H5F52. Key Resources: The AI computing core includes an octa-core Arm Cortex CPU, Adreno 623 GPU, Adreno VPU 623, Hexagon NPU, and Qualcomm Spectra 692 ISP; the real-time control core includes an Arm Cortex-M33 at 250 MHz, 4 MB of Flash, and 1.5 MB of RAM3. Software System: The AI computing core runs Ubuntu Linux and also supports Debian; the real-time control core runs Arduino Core based on Zephyr OS4. Primary Tasks: The AI computing core handles local AI, machine vision, network communication, multimedia processing, and Linux applications; the real-time control core handles real-time control of GPIO, PWM, CAN-FD, ADC, sensors, and actuators5. Collaboration Method: Commands, status, and data are exchanged via the Arduino Bridge (RPC)Features:1. MPU + MCU dual-processor architecture: The Qualcomm Dragonwing IQ8 (QCS8275) handles Linux, AI, vision, networking, and multimedia tasks; the STM32H5F5 MCU provides deterministic real-time I/O and control capabilities2. Up to 40 dense TOPS of edge AI performance: The Hexagon NPU supports local execution of computer vision, speech processing, LLM/VLM, and multimodal applications. Onboard 16 GB LPDDR5 and 64 GB eMMC meet storage requirements for the system, models, and application data3. Extensive expansion options for robotics and industrial control: Features tri-band Wi-Fi 6, Bluetooth 5.3, 2.5 Gbit RJ45, M.2 2230 NVMe, HDMI, three MIPI CSI lanes, CAN-FD, UNO Shield, 40-pin JHAT, and Qwiic interfaces, among othersSpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 21cm * 15cm * 6cm / 8.27inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 10.00kgs / 22.05lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 20 pcs = 11820 pcs40HQ: 1373 cartons * 20 pcs = 27460 pcs
6 442,00 kr
-
Waveshare Waveshare For Raspberry Pi LoRaWAN Gateway Module Standard Mini-PCIe Socket, SX1302 868M, SX1302 868M With Expansion Board, SX1303 868M, SX1303 868M With Expansion Board, SX1302 915M, SX1302 915M With Expansion Board, SX1303 915M ...
Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 252 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 252 pcs = 113400 pcs40HQ: 1045 cartons * 252 pcs = 263340 pcs
1 119,00 kr - 1 429,00 kr
-
Waveshare Waveshare For Raspberry Pi Pico 2 Microcontroller Board Based On Official RP2350 Chip Dual-Core & Dual-Architecture Design, Original, Starter Kit, Sensor Kit
1. The official Raspberry Pi self-designed RP2350 microcontroller chip was adopted2. It features a unique dual-core, dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, with operating frequencies reaching up to 150 MHz flexible clock3. It is equipped with 520KB SRAM and 4MB on-chip Flash4. The stamp hole design allows for direct soldering integration onto the user self-designed baseboard5. Supports USB1.1 host and device6. Supports low-power sleep and hibernation modes7. Can be recognized as a large-capacity storage device via USB for drag-and-drop program download8. Up to 26 multi-functional GPIO pins, 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, and 16 controllable PWM channels9. Comes with a temperature sensor10. 12 programmable I/O (PIO) state machines for custom peripheral supportParameters1. Processor: dual-core ARM Cortex-M33; Dual-core Hazard3 RISC-V 150MHz2. SRAM: 520KB3. Flash: 4MB4. Security features: boot signature, OTP storage for decryption, hardware SHA-256 accelerator, etc.5. GPIO pins: 266. Peripherals:- UART x 2- SPI x 2- I2C x 2- ADC x 3- USB 1.1 and PHY x 1- PWM x 16- PIO state machines x 12- HSTX x 1Entry-level kit packaging list:- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- Large breadboard + breadline x 1- USB cable Type A male to Micro male, about 1.2 meters long x 1Sensor kit packaging list:- Sensor kit x 1- Raspberry Pi Pico 2 (with soldered yellow pin headers) x 1- Acrylic transparent protective cover x 1- PH2.0 4PIN connection cable 300mm (5pcs) × 1- PH2.0 double-ended connection cable 4PIN opposite direction (15pcs) x 1- Infrared remote control x 1- USB cable Type A male to Micro male about 1.2 meters x 1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 8cm * 4cm * 4cm / 3.15inch * 1.57inch * 1.57inch Qty per Carton 432 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 432 pcs = 177984 pcs40HQ: 958 cartons * 432 pcs = 413856 pcs
108,00 kr - 688,00 kr
-
Waveshare Waveshare IMX219-120 8MP 120 Degree FOV Camera, Applicable for Jetson Nano
Features1. Supports NVIDIA Jetson Nano Developer Kit2. 8 Megapixels3. Sensor: IMX2194. Resolution: 3280 × 24645. Lens specifications:- CMOS size: 1/4inch- Aperture (F): 2.2- Focal Length: 1.88mm- Angle of View (diagonal): 120 degree- Distortion: <13.6%- Lens dimensions: 6.5mm x 6.5mm6. 4 screw holes7. Used for attachment8. Provide 3.3V power output9. Dimension: 25mm x 24mm10. Weight: 12gPacking List:1. IMX219-120 Camera x12. 15-pin FFC (opposite sides contact) x1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 720 Carton Weight 14.00kgs / 30.86lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 720 pcs = 221760 pcs40HQ: 716 cartons * 720 pcs = 515520 pcs
202,00 kr
-
Waveshare Waveshare Industrial ESP32-S3 Control Board With RS485 And CAN Communication Interfaces, External Antenna, Onboard Antenna
1. Based on the ESP32-S3 microcontroller, featuring an integrated Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz.2. Integrates 2.4 GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication, offering excellent RF performance.3. Features an onboard isolated RS485 interface for easy expansion and connection to various RS485 Modbus industrial modules or sensors.4. Features an onboard isolated CAN interface for easy expansion and connection to various CAN devices.5. Includes onboard pin headers for connecting to other devices.6. Equipped with an onboard USB Type-C interface for power supply, firmware downloading, and debugging; also includes a terminal block power input supporting a wide 7V–36V voltage range, suitable for industrial power applications.7. Features an onboard RTC (Real-Time Clock) chip to support scheduled tasks.8. Incorporates onboard digital isolation to protect the control chip from external signal interference.9. Features onboard integrated power isolation to provide stable isolated voltage, eliminating the need for an external power supply on the isolated side.10. Includes onboard RS485 transceiver indicators and CAN status indicators for easy monitoring of device operation.11. Housed in a DIN-rail mountable protective enclosure for convenient installation and enhanced safety.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 32cm * 30cm / 19.69inch * 12.6inch * 11.81inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs40HQ: 1289 cartons * 100 pcs = 128900 pcs
256,00 kr - 283,00 kr
-
WAVESHARE WAVESHARE Luckfox Lyra PLC RK3506B Programmable Logic Controller Onboard Dual 100Mbps Ethernet Ports, Standard, POE
1. It is equipped with multiple remote networking solutions, enabling remote management and debugging2. It supports opening the device management backend through a browser, allowing for quick system configuration3. It runs on the Linux system, with a complete ecosystem and support for multiple language development4. It has multiple peripheral interface options, supporting wired and wireless network connections, and providing interfaces such as RS232/RS422/RS485/CAN/USB, suitable for various scenarios including data acquisition and reporting, linkage control, and protocol conversion5. It has a wide range of application scenarios, including industrial control, smart home, and smart agricultureParameters1. Main controller: RK3506B2. Core: triple-core ARM cortex-A7 (1.2GHz)3. Memory: built-in 512MB DDR3L4. Storage: eMMC (8GB)5. Screen: 1.9-inch LCD touchscreen, resolution 170 × 3206. USB: native USB OTG 2.0 x 17. Hub: expansion USB HOST 2.0 x 18. Network port: 10/100M ethernet port x 29. Wireless communication: built-in 2.4GHz Wi-Fi 6 / Bluetooth 5.2 / BLE10. CAN: CAN x 111. Serial port: RS232 x 1, RS422/RS485 x 1 (function determined by wiring)12. Relay channels: 2 channels13. Relay contact Type: normally open (NO) x 1, normally closed (NC) x 114. Relay contact load: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC15. Buttons: customized button x 1 (used for default firmware upgrade), RESET button x 1Standard version packaging list:- Luckfox Lyra PLC x 1- Glue stick antenna x 1- USB Type-A to Type-C cable approximately 1 meter x 1- SH1.0 3PIN connection cable approximately 100mm x 2- SH1.0 4PIN connection cable 100mm x 4- Snap-on plug 6mm x 1Specification: Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 14cm * 12cm * 10cm / 5.51inch * 4.72inch * 3.94inch Qty per Carton 24 Carton Weight 7.00kgs / 15.43lb Carton Size 50cm * 32cm * 30cm / 19.69inch * 12.6inch * 11.81inch Loading Container 20GP: 555 cartons * 24 pcs = 13320 pcs40HQ: 1289 cartons * 24 pcs = 30936 pcs
1 254,00 kr - 1 348,00 kr
-
Xbee Sensor Expansion Shield V5 with RS485 BlueBee Bluetooth Interface for Arduino
1. Type: Shield 2. Mainly Compatible with: ArdunioSpecification: General Types Shield Size 8.0*8.0*3.0 cm Weight 105 g Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 200 Carton Weight 24.20kgs / 53.35lb Carton Size 40cm * 32cm * 30cm / 15.75inch * 12.6inch * 11.81inch Loading Container 20GP: 694 cartons * 200 pcs = 138800 pcs40HQ: 1612 cartons * 200 pcs = 322400 pcs
41,00 kr
You have seen 37 out of 37 products